Zhongshan City Richsound Electronic SSB-3WB TV Soundbar User Manual manual
Zhongshan City Richsound Electronic Industrial Ltd. TV Soundbar manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2199778 |
| Application ID | D1pYpqptwRaO2slrBhXzuQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 115.61kB (1445175 bits) |
| Date Submitted | 2014-02-25 00:00:00 |
| Date Available | 2014-02-25 00:00:00 |
| Creation Date | 2014-02-13 11:01:37 |
| Producing Software | Acrobat Distiller 10.0.0 (Windows) |
| Document Lastmod | 2014-02-18 11:08:48 |
| Document Title | manual.pdf |
| Document Creator | Adobe InDesign CS6 (Windows) |
| Document Author: | WiChen |
SSB-3WB V1.0 Contents Whatâs in the Box........................................................................................................ 2 Important Safety Instructions .................................................................................... 5 Main Unit: Top View .............................................................................................................. 6 Rear View .............................................................................................................................. 6 Smart Remote Control ......................................................................................................... 6 Identifying the Parts ................................................................................................... 6 Prepare the Smart Remote Control .................................................................................... 7 Precautions Concerning Batteries ...................................................................................... 7 Getting Started........................................................................................................... 7 Connections ............................................................................................................... 8 Place TV on top .................................................................................................................... 8 Connect to Power ................................................................................................................ 8 Connect to TV ....................................................................................................................... 8 Basic Operation........................................................................................................ 10 Turn On/Off .......................................................................................................................... 10 Select Sources ..................................................................................................................... 10 Adjust Volume Level ........................................................................................................... 10 Mute Sound ......................................................................................................................... 10 Bass Boost ............................................................................................................................ 11 Select SRS Sound................................................................................................................. 11 Play with Bluetooth Device................................................................................................ 11 Pair the Bluetooth-enabled devices ................................................................................ 11 Listen to music from Bluetooth device ............................................................................. 11 Program Smart Remote Control to Control TV ................................................................ 12 Troubleshooting ........................................................................................................ 13 6SHFLĂFDWLRQV ........................................................................................................... 14 Whatâs in the Box SSB-3WB V1.0 Main Unit Instruction Manual Smart Remote Control (Maxell CR2025 lithium button battery included) <50kg 53cm Line Cable (3.5mm to 3.5mm) (For TV Headphone Output) Line Cable (RCA to RCA) (For TV Line out) AC Power Cable (For US) '2VDQG'21¡7V/HDĂHW Important Safety Instructions Warning! Indicates that âthere is a possibility of causing death or serious physical injury if this Product is erroneously handledâ. Caution! Indicates that âthere is a possibility of causing physical injury*1 or occurrence of physical damage*2 if this Product is erroneously handledâ. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 7KHOLJKWQLQJĂDVKZLWKDUURZKHDG symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated âdangerous voltageâ within the productâs enclosure WKDWPD\EHRIVXIĂFLHQWPDJQLWXGHDV to constitute a risk of electric shock to persons. *1: Serious physical injury implies injuries such as loss of eyesight or injury, burns, electric shock, bone fracture or poisoning that have subsequent complications and which require hospitalization or long term hospital visit for medical treatment. *2: Physical injury implies injury, burns and electric shock which do not require hospitalization or long-term hospital visit for medical treatment. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus. This symbol shows that the user needs to exercise FDXWLRQZKLOHKDQGOLQJWKLV3URGXFWWRSUHYHQWĂUH H[SORVLRQDQGKHDWLQJ7KHVSHFLĂFFDXWLRQWREH taken is written inside the symbol. This symbol implies restriction of an action while KDQGOLQJWKLV3URGXFW7KHVSHFLĂFUHVWULFWLRQLV written inside or near the symbol. Reading the userâs manual This symbol implies compulsion of an action based RQWKHLQVWUXFWLRQV7KHVSHFLĂFFRPSXOVLRQLV written inside or near the symbol.    7KHFRQWHQWVRIWKLVXVHU¡VPDQXDOPD\EH PRGLĂHGZLWKRXWDQ\SULRUQRWLĂFDWLRQ 7KHDSSHDUDQFHDQGVSHFLĂFDWLRQVPD\EH SDUWLDOO\PRGLĂHGZLWKRXWDQ\SULRUQRWLĂFDWLRQ 7KH&RPSDQ\VKDOOQRWEHUHVSRQVLEOHIRUDQ\ LQMXU\FDXVHGE\ĂUHHDUWKTXDNHRUDWKLUG party, as well as any injury that occur due to intentional or accidental mishandling or improper use by the customer.  &RPSDQ\VKDOOQRWEHKHOGUHVSRQVLEOH for any damages that may occur due to employment of a usage method not designated in the userâs manual.  &RPSDQ\VKDOOQRWEHKHOGUHVSRQVLEOH for any damages that may occur due to malfunctioning of the Product resulting from the use of this Product together with other devices.  7KLV3URGXFWLVQRWLQWHQGHGIRUXVHLQIDFLOLWLHV and equipment which may affect human lives, including medical equipment, nuclear devices, aerospace equipment and transport equipment, as well in facilities and equipment which require a high degree of reliability. Company shall not be held responsible for any accident resulting in personal injury or GHDWKRUDQ\ĂUHDFFLGHQWWKDWPD\RFFXU due to failure of this Product when this Product is used in the control systems of those facilities and equipment. Warning To reduce the risk of electric shock, do not expose this apparatus to moisture. Warning The battery (battery or batteries or battery pack) must not be exposed to excessive heat such as VXQVKLQHĂUHRUWKHOLNH FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Important Safety Instructions Warning! Caution! Do not repair, modify or disassemble. ,WPD\FDXVHĂUHHOHFWULFVKRFNRULQMXU\7KHDonât Company shall not be responsible for any physical GDPDJHFDXVHGE\UHSDLULQJPRGLĂFDWLRQRU disassembly. Also, any repairing of a fault caused E\UHSDLULQJPRGLĂFDWLRQRUGLVDVVHPEO\E\WKH user will be charged, even if it happens during the warranty period. Keep the Product (Remote Control) out of reach of children. Donât They may accidentally swallow the battery and cause choking and damage the stomach. The cord may entangle around the childâs body and cause suffocation. If any accident occurs by any chance, please consult a doctor immediately. Do not use in a rainy or snowy place, by the waterside or in the bathroom. Donât ,WPD\FDXVHĂUHRUHOHFWULFVKRFN Do not use if it is thundering. ,WPD\FDXVHĂUHRUHOHFWULFVKRFN Do not Neep a Ăower vase, Ăowerpot, cup, or any container containing medicine, cosmetics or water, near the Product. They may break and get into the Product and FDXVHĂUHRUHOHFWULFVKRFN Do not insert any kind of metal or easily combustible object through the aperture. ,WPD\FDXVHĂUHRUHOHFWULFVKRFN Do not block any ventilation openings. ,WPD\JHWKHDWHGDQGFDXVHĂUH Install in accordance with the manufacturerâs instructions. Do not put more than 50kg on top of this apparatus. It may damage the apparatus. Do not use a wrong power plug out of the 2 power cords provided for this apparatus. It may damage the power plug and/or the SRZHUVRFNHW,WPD\FDXVHĂUHRUHOHFWULFVKRFN Do not keep in a shaky place. The Product may fall and get damaged. Do not keep in a place where lampblack or steam falls. ,WPD\FDXVHĂUHRUDFFLGHQW Do not keep in a place which is directly hit by cold air, or a place which is extremely cold. Dew may fall and cause short circuit or burnout. Do not listen in high volume continuously for a long time. Do not listen in high volume, which causes ringing in the ears, continuously for a long time. It may damage hearing. Do not raise the volume excessively from the beginning. Sudden high volume may damage hearing. Minimize the volume before playing. Do not keep in an excessively hot place. sush as radiators, heaters, stoves, or other apparatus (including ampliĂers) that produce heat. The surface of the device or parts may get GDPDJHGDQGPD\DOVRFDXVHĂUH'RQRWNHHS especially in a closed car in summer, and in a place where sunlight directly falls or near a VWRYH7KLVPD\FDXVHOHDNDJHRIEDWWHU\ĂXLG Do not use in sandy beaches and sandy soil where sand can easily enter, or in dusty locations. ,WPD\FDXVHEXUQRXWĂUHRUDFFLGHQW Do not cover or wrap with a cloth or futon. Heat may get generated and deform the 3URGXFWRU3URGXFWPD\FDWFKĂUH Donât Donât Donât Donât Do not keep a cathode-ray tube near it. Spots may appear because of it. Ensure to refer the userâs manual to connect to an external device. Connect to an external device after carefully reading this userâs manual and the userâs manual of the external device, as well as after turning off the power. Do not plug or unplug the power plug with wet hands. It may cause electric shock. Insert the power plug completely and Ărmly into the outlet socket. ,IWKHSRZHUSOXJLVQRWLQVHUWHGSURSHUO\ĂUHPD\ occur due to electric shock or dust deposition. Turn off power when repairing or if not going to be used for a long time, and remove the power plug. Hot adhering to this may cause electric shock or physical damage. Donât Donât Donât Donât Donât Donât Donât Donât Donât Donât Donât Donât Donât Donât Caution! Important Safety Instructions Safety Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Only use this product indoor. Clean only with a dry cloth. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where it exit from the apparatus. 2QO\XVHDWWDFKPHQWVDFFHVVRULHVVSHFLĂHG by the manufacturer. 9 Do not override the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades - one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If WKHSURYLGHGSOXJGRHVQRWĂWLQWR\RXURXWOHW ask an electrician to replace the obsolete outlet. 10 Use only with a cart, stand, tripod, bracket or WDEOHVSHFLĂHGE\WKHPDQXIDFWXUHURUVROG with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. - Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while. - The apparatus is not intended to be operated by means of an external timer or separate remote-control system. - If the supply cord is damaged, it must be replaced by the manufacturer, its service DJHQWRUVLPLODUO\TXDOLĂHGSHUVRQVLQRUGHU to avoid a hazard. - Do not immerse this product in liquid. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equip ment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. 5HIHUDOOVHUYLFLQJWRTXDOLĂHGVHUYLFH personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 12 This is CLASS II apparatus with double insulation and no protective earth provided. 13 The mains plug is used as the disconnect device, the disconnect device must remain readily operable. 14 This apparatus is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the apparatus by a person responsible for their safety. Children should be supervised to ensure that they do not play with the apparatus. Identifying the Parts Main Unit: Top View Smart Remote Control - Turn on this unit or switch to Power standby mode. SSB-3WB 1 ON/OFF - Turn on or turn off the unit. 2 BT/PAIR - Activate the pairing function in BLUETOOTH mode and disconnect the existing paired Bluetooth device. . 3 VOL+/- (Volume) - Adjust sound volume level 4 Optical - Select OPTICAL source or activate Audio Return Channel (ARC) function. 5 RCA/LINE IN Select RCA or LINE IN Source input. 6 TV Learning Zone - Store some TV Remote Control functions onto the Smart Remote Control. (see P.12 for detail) 7 LEARNING INDICATION LIGHT. - On: Learning mode activated - Off: Learning mode inactivated (see P.12 for detail) 8 LEARN - Activate learning mode to setup commands from the TV remote control, to control some TV functions. 9 BF - Plays/pauses/resumes playback in Bluetooth mode. 10 SRS/BASS - Switch on or turn off SRS WOW HD effect. - Select Bass boost level 1,2 or no Bass boost effect. 11 MUTE - Mute or resume sound from the unit. - Select a source. - Pair Bluetooth-enabled device. - Increase sound volume level. - Decrease sound volume level. 6 Light indicators Rear View 1 OPTICAL Terminals - 1 Optical input jack. 2 RCA Terminals - Standard RCA audio input jack. 3 LINE IN Terminals - Standard 3.5mm audio input jack. 4 AC~ Power Plug - Connect a power cord. Getting Started Prepare the Smart Remote Control Precautions Concerning Batteries The Smart Remote Control provided allows the unit to be operated from a distance. z Even if the Smart Remote Control is operated within the effective range (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control. z If the Smart Remote Control is operated near other products which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly. For First-time use: The unit has a pre-installed lithium CR2025 battery. Remove the protective tab to activate the remote control battery. When the Smart Remote Control is not to be used for a long time (more than a month), remove the battery from the Smart Remote Control to prevent it from leaking. If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries with new ones. Do not use any batteries other than WKRVHVSHFLĂHG Do not heat or disassemble batteries. 1HYHUWKURZWKHPLQĂUHRUZDWHU Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short circuit, leak or explode. Never recharge a battery unless it is FRQĂUPHGWREHDUHFKDUJHDEOHW\SH WARNING: The batteries (battery pack or batteries installed) shall not be exposed to H[FHVVLYHKHDWVXFKDVVXQVKLQHĂUHRUWKH like. To Replace the Smart Remote Control Battery: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. $ 3UHVVGRZQWKHĂLSRQWKHOHIW (B) : Pull out the battery tray and remove the old battery. (C) : Place a new CR2025 battery into the battery tray with correct polarity (+/-) as indicated. (D) : Insert the tray back into the slot. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. Model No: SSB-3WB with certification/registration number IC : 11096A-SSB3W Connections Place TV on top Connect to TV 3OHDVHUHDGWKH'2VDQG'21¡7V/HDĂHW provided for proper installation position of the unit. Using Optical IN socket If your TV does not have HDMI sockets, please follow the set up below. or Composite video (Cable not supplied) 30cm AV equipment e.g. Blu-ray Player 53cm Warning: Please turn down the volume of the TV, or other sources before connection. Loud sound might be suddenly produced. (Cable not supplied) Component video (Cable not supplied) a) Connect Optical output source into the unit. b) Connect Video output of the AV equipment into the Video input of TV via either, 1) Component connection (Green, Blue, Red)(not supplied); or 2) Composite connection (Yellow)(not supplied). Note: You can listen to the TV program sound from connecting to the unit via LINE-IN cable Connect to Power Caution: Risk of product damage! - Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. - Risk of electric shock! When you unplug the AC power, always pull the plug from the socket. Never pull the cord. - Ensure the correct power cord is matched the main power socket. Using a wrong power cord might damage the power plug and the socket. Using RCA IN socket For audio devices that do not support HDMI or Optical output, please follow the set up below. Connect the AC power cord to: - the AC~ socket on this unit. - the wall socket. (Cable not supplied) AV equipment e.g. DVD recorder a) Connect Composite Video output of the AV equipment e.g. DVD recorder to Composite Video input on the TV. Connections Auto-on/off function is applied in this unit. Auto-off is to facilitate people not to control the unit when no sound is playing in few minutes. And when there are sounds input again, the unit will switch on automatically after few seconds. Warning: If the volume of the TV or an external device via RCA or LINE IN is too low, the auto-off function will be triggered. When this situation happened for 2.5 minutes, LED VRXUFHOLJKWZLOOĂDVKVORZO\RQWKHXQLWIRU the next 30 seconds and the unit will switch to standby mode. Please turn up the volume of the input source (not the unit, but, e.g. TV or MP3 player, etc.) slowly, until it returns to normal mode. To avoid the auto-off being triggered unintentionally, pre-set the source volume higher and adjust the unit volume to a comfortable level. Note: You might hear the sound over-lapping from both the TV and the unit while following some of the suggestion connections. To avoid this, turn the volume of TV down to 0 or mute it. b) Connect Audio L-R output of the AV equipment to the LINE IN or RCA input onto the unit. Note: You can listen to the TV program sound from connecting to the unit via LINE-IN cable as shown previously on page 8. Using Line-IN socket You can listen to the sound of the TV program by connecting to the unit via LINE-IN cable. Note: You can also connect to your PC with LINE-IN cable in the setup shown below. 3& VGA IN VGA OUT HEADPHONE (Cable not supplied) Connect to an External Audio Device You can connect to your audio devices, e.g. CD player, to enjoy purely music, via the following conections. (Cable not supplied) Audio Equipment, e.g. CD player, MP3 player Basic Operation Turn On/Off OPTICAL Turning the System ON/OFF Off RCA/LINE IN Either, 1) Press RCA/LINE IN button on the remote control; or 2) button on the unit, will allow you to select RCA or LINE IN source. RCA/LINE IN light indicator: RCA/LINE IN POWER Amber RED Off Amber On White RCA LINE IN Adjust Volume Level The unit will switch to standby mode when the audio cables are disconnected or when you turn off TV/external device after several minutes. Either, 1) Press the VOL +/- button on the remote control; or 2) Press / button on the unit, to increase or decrease the volume level. Select Sources BLUETOOTH If the unit is connected to the TV headphone jack, you can control the Volume Level using the TV remote control. Either, 1) Press BT/PAIR button on the remote control; or 2) button on the unit, will allow you to select Bluetooth source. Mute Sound Press the MUTE button on the remote control to mute. Press this button again or VOL+/VOL- buttons on the remote control or on the unit to resume the sound. The light indicator on the unit will blink until sound resumes. BLUTTOOTH Blue On Amber Either, 1) Press the button on the unit; or 2) Press the ON/OFF button on the remote control. Note: When turning the system on, the system will continue in the mode was set last time. Note: Be sure to unplug the power cord from the outlet when the system is not in use for an extended period of time. POWER light indicator: On Off Bass Boost Optical/ARC Either, 1) Press BASS/SRS button on the remote control; or 2) Press button on the unit, to turn on the bass. Press this button again to switch to level 2 or to turn it off. Either, 1) Press Optical button on the remote control; or 2) button on the unit, will allow you to select Optical source input for watching broadcasting TV program. OPTICAL light indicator: 10 Basic Operation 2 Activate your Bluetooth device and select the search mode. 3 âSSB-3WBâ will appear on your Bluetooth device. 4 Select âSSB-3WBâ and enter â0000â for password if necessary. 7 On successful pairing, the BLUETOOTH Indicator will light up steadily. Tip - If there is an existing connection, press the BT PAIR Button on the remote control to re-activate the pairing mode, the existing connection will be interrupted. - If no other Bluetooth device pairs with this player within two minutes, the player will recover its previous connection. - The player will also be disconnected when your device is moved beyond the operational range. - If you want to reconnect your device to this player, place it within the operational range. - If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player. - If the connection is lost, follow the instructions above to pair your device to the player again. BASS Bass off Amber Bass 1 White Bass 2 Select SRS Sound Either, 1) Press and hold SRS/BASE button on the remote control; or 2) Press button on the unit to select SRS WOW HD effect. Press this button again to cancel the effect. SRS OFF Amber OPEN Play with Bluetooth Device You can listen to music from a Bluetooth-enable device via this player. Listen to music from Bluetooth device If the connected Bluetooth device supports Advanced Audio Distribution 3URĂOH $'3 \RXFDQOLVWHQWRWKH music stored on the device through the player. z If the device also supports Audio Video 5HPRWH&RQWURO3URĂOH $95&3 SURĂOH you can use the playerâs remote control to play music stored on the device. 1 Pair your device with the player. 2 Start playing music via your device (if it support A2DP) 3 Use supplied remote control to control play (if it supports AVRCP) - To pause/resume play, press theBF button. Pair the Bluetooth-enabled devices The first time you connect your Bluetooth device to this player, you need to pair your device to this player. Note: - The operational range between the main unit and a Bluetooth device is approximately 8 meters. - Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device. - Compatibility with all Bluetooth devices is not guaranteed. - Any obstacle between this unit and a Bluetooth device can reduce the operational range. - Keep this unit away from other electronic devices that may cause interference. To connect your device to the unit via Bluetooth, follow the steps below: 1 Switch the unit on. Press the Button on the main unit or the BT/PAIR Button on the remote control repeatedly to select BLUETOOTH pairing mode, the %/8(7227+,QGLFDWRUZLOOĂDVKXQLWLWSDLUV 11 Basic Operation Program Smart Remote Control to Control TV You can store a total of up to seven of your most frequently used TV functions in the TV learning zone of the Smart Remote Control. This feature enables you to use only one remote control to operate the unit together with your TV. The remote control codes of a TV are stored in the Smart Remote Control. The available preset buttons are ON/OFF , FUNCTION , ENTER, TV VOL+/VOL-, TV CH+/CH-. NOTE: During the learning process, the normal remote control functions are disabled. 1 Place the Smart Remote Control (A) within a 5mm-50mm distance from the TV remote control (B), pointer to pointer as shown above. 2 Press and hold the LEARN button for 2 seconds to activate the learning mode. A red indicator on the Smart Remote Control (A) will light up. 3 Press one of the TV learning zone buttons on the Smart Remote Control (A), the UHGLQGLFDWRUĂDVKHV 4 Press the button on the TV remote control (B) that is to be stored on the Smart Remote Control (A). When the code is received successfully, the red LQGLFDWRUZLOOTXLFNO\ĂDVKIRUWLPHV,I the code is not successfully received, WKHUHGLQGLFDWRUZLOONHHSRQĂDVKLQJ 5 Repeat steps 3-4 to program more functions onto the Smart Remote Control (A). 6 Press the LEARN button to save the setting and to exit the learning mode. Red indicator will turn off immediately. 12 Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting for service. Warranty void if case is opened. Symptom No sound Suddenly No sound No sound, speaker is connected to working AC power but sound wonât come on No sound. Speaker comes on Noise or hiss heard at output Hum or Buzz that increases or decreases when more than one source are inputting single to the unit at the same time Smart Remote control does not work The Unit does not responds to the remote control HDMI ARC/CEC ERROR No Sound or Have sound but with error message shown on TV HDMI ARC/CEC ERROR Both TV and the unit has sound coming out Likely Cause What to do Speaker not connected to active  Verify that speaker is connected and AC power that the circuit is on. Power not switched on  Switch on power and verify that power LED is on. Triggered auto-off function  Turn the volume up of the source, e.g TV, mp3 player, etc, and readjust the sound of the unit to trigger auto-on function.  6HH1R6RXQGV\PSWRPDERYH Cannot trigger auto-on function  ,QFUHDVHWKHYROXPHRIWKHVRXUFHLQSXW signal. Speaker power cable is faulty or  Re-seat the power cable at both ends. improperly connected  6XEVWLWXWHDNQRZn-good power cable. Blown fuse  Contact with your manufacturer for repairment. Faulty cables and connections  'LVFRQQHFWDQGUHVHDWVLJQDOFDEOHV  0DNHVXUHFDEOHVDUHSOXJJHG completely.  5HSODFHVXVSHFWHGFDEOHZLWKD known-good cable. Faulty Cables and connections  'LVFRQQHFWDQGUHVHDWVLJQDOFDEOHV  0DNHVXUHFDEOHVDUHSOXJJHG completely.  5HSODFHVXVSHFWHGFDEOHZLWKD known-good cable. Noisy source device  Disconnect the devices that are connected to your speaker one at a time. If the noise goes away, the problem is with the source or the connecting cable. Interference internally  Disconnect or mute the other channels to solve the problem. Faulty cable between source  Substitute a known-good cable for the equipment and unit suspected faulty cable. No/Low battery power  5HPRYHWKHWUDQVSDUHQWĂOPDWWKH bottom of Smart Remote control.  ,QVHUW5HSODFHUHPRWHFRQWUROEDWWHU\ with a CR2025 battery. (see P.7) No/Low signal from remote control  5HGXFHWKHGLVWDQFHEHWZHHQWKH to the unit Smart Remote control and the unit.  $LPWKH6PDUW5HPRWHFRQWUROGLUHFWO\ at the sensor on the front of the unit. The unit responds but no sound  %HIRUH\RXSUHVVDQ\IXQFWLRQEXWWRQ ĂUVWVHOHFWWKHFRUUHFWVRXUFH  6HH7URXEOHVKRRWLQJ>1R6RXQG@ Symptom. TV CEC function is not compatible  &KHFNWKH79&(&IXQFWLRQDQG with unit CEC function. compatibility on TV user's manual.  'LVDEOH79&(&$5&IXQFWLRQ  8VHRWKHUVXJJHVWHGFRQQHFWLRQV TV CEC function is not partially  &KHFNWKH79&(&IXQFWLRQDQG compatible with unit CEC function. compatibility on TV userâs manual.  6HOHFWVSHDNHURSWLRQLQ79PDQXDOWR from the Unit only 13 SpeciĂcations General Power Requirements...........................................................................................AC 120V~60Hz Output Power: Front Speakers ............................................................................................................ 10W x 4 Woofer ..............................................................................................................................30W Total Harmonic Distortion ..................................................................................... 1%(1kHz, 1W) Audio Input Sensitivity/Impedance LINE: ........................................................... P9N Frequency Response ............................................................................... 40Hz - 20kHz(+/- 3dB) Unit Dimensions (W x H x D) ........................................................................... 720 x 54 x 340mm NET Weight ........................................................................................................................... 3.4kg Speaker Front Impedance.............................................................................................................................  Rated Power ..........................................................................................................................10W Woofer Impedance.............................................................................................................................  Rated Power ..........................................................................................................................30W Remote Distance ...................................................................................................................................6m Angle ....................................................................................................................................... 30O Digital signal input/output information Digital Sampling frequency .............................................................................................. 48kHz Warranty: 2 years z 'HVLJQDQGVSHFLĂFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : WiChen Create Date : 2014:02:13 11:01:37+08:00 Modify Date : 2014:02:18 11:08:48+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:38f543d5-04e0-42b5-b809-f829325f3a78 Original Document ID : adobe:docid:indd:6727938f-d9ba-11e0-a8d6-99f03624a9e1 Document ID : xmp.id:9235694F4083E311B8D4B34E9DE5E2E7 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:9035694F4083E311B8D4B34E9DE5E2E7 Derived From Document ID : xmp.did:924ECDDBC179E311A567D486F286DB55 Derived From Original Document ID: adobe:docid:indd:6727938f-d9ba-11e0-a8d6-99f03624a9e1 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:01:22 16:39:53+08:00 Metadata Date : 2014:02:18 11:08:48+08:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Creator : WiChen Title : manual.pdf Producer : Acrobat Distiller 10.0.0 (Windows) Trapped : False Page Count : 15EXIF Metadata provided by EXIF.tools