Zhongshan K mate General Electronics BTC009B Bluetooth Car Kit User Manual BTC009 User s Manual for FCC

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Car Kit BTC009 User s Manual for FCC

Users Manual

BTC009 Bluetooth car kit User’s manual  Getting started……………………………………………..………..1 1. Brief introduction…………………………………………………….1 2. Overview……………………………………………………………..1 3. Installation………..………………………………………………......1  Using the car kit……………….……………………………………..1 1. Pairing with a Bluetooth cell phone……………………………….….1 2. Turning the car kit on/off……………………………………..……....2 3. Making calls with the car kit……………..…………………………...3 4. Automatic connecting to a Bluetooth device………………………....4 5. LED indicator………………………………………………………....4  Care and maintenance…………………………………………….…4  FAQs..………………………………………………………….….…..5  Specifications………………………………………………………....6
 Getting started 1. Brief introduction Welcome to use this Bluetooth car kit BTC009. It adopts echo cancellation technology and provides high-level sound quality. At the same time it offers easy to use hands-free functions. Please read this user manual carefully before using it. 2. Overview 3. Installation 1) Insert the car kit into your car’s cigarette lighter socket; 2) Align microphone and speaker so that they face the driver without any barriers that might reduce conversation quality;  Using the car kit 1. Pairing with a Bluetooth cell phone Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different cell phones. Please refer to your cell phone’s user manual for further information. The pairing steps are as follows: 1
1) Insert the car kit into your car’s cigarette lighter socket; 2) Make sure your car kit is off, otherwise turn off the car kit first (please refer to “turning the car kit on/off”); 3) Press and hold the red button for 7-8 seconds and release it when the red and blue LEDs flash alternately. The car kit entered pairing mode; 4) Switch on your cell phone’s Bluetooth function and search for Bluetooth devices. After the search has been completed, select “BTC009” from the Bluetooth device list. 5) According to indication, enter password or PIN No:”0000” and press ”Yes” or “confirm”; 6) After successful pairing, select “BTC009” from the Bluetooth device list and press “connect”. The blue LED will flash once every 5 seconds when the connection is established. Remarks:  Pairing mode will last 2 minutes. The car kit will exit pairing mode automatically if it can’t be connected to any device within 2 minutes. If you want to continue to pair the car kit with a Bluetooth device, please turn it off first and re-pair according to steps 1-6 mentioned above.  After successful pairing the car kit and your cell phone will remember each other. The devices don’t have to be re-paired at next use unless the pairing information is deleted because of a new pairing.  The car kit can remember 8 paired devices. When the number of paired devices exceeds 8, the old ones will be replaced starting with the first.  Every time you turn on BTC009 it will try to connect to the last connected device automatically. If you want to pair it with another device, please switch off the paired device’s Bluetooth function first and pair the car kit with the new device according to steps 1 6 mentioned above. 2. Turning the car kit on/off Function Operation Turn on the car kit Press and hold the red button for about 3-5 seconds until the blue LED flashes Turn off the car kit Press and hold the red button for about 3-5 seconds until the red LED flashes 2
3. Making a call with the car kit Function Status of BTC009 Operation Answer call Ringing Short press green button once Reject call Ringing Short press red button once Cancel calling Calling Short press red button once End call Conversation mode Short press red button once Adjust volume Conversation mode Adjust volume wheel Transfer call Conversation mode Short press green button once to transfer the call to cell phone, press it again to transfer the call to the car kit Remark: On some cell phones you have to transfer the call by selecting the appropriate option in the phone’s menu. Microphone mute Conversation mode Press and hold green button for about 2 seconds until hearing an indication tone. When the microphone is muted, the car kit sounds an indication tone every 5 seconds Cancel mute Conversation mode Press and hold green button for about 2 seconds until hearing an indication tone Redial last number Standby mode (connected to a Bluetooth device) Press and hold green button for about 2 seconds until hearing an indication tone Voice dial Standby mode (connected to a Bluetooth device) Short press green button once 3
Remarks:  Not all the cell phones support all the functions listed above. Please refer to your cell phone user manual for further information.  For some cell phones, when you press the answer button on the phone, the call will be transferred to cell phone firstly. At this time, you need to transfer the call to the car kit through operating on your cell phone. Please refer to your cell phone user manual for further information. 4. Automatic connecting to a Bluetooth device Every time the car kit is turned on it will try to connect to the last connected device automatically. Remarks:  The car kit will only try to connect to the last connected device.  Please switch on your Bluetooth device’s Bluetooth function before trying to connect to it.  On certain Bluetooth devices like some Nokia cell phones, you have to allow automatic connecting. 5. LED indicator LED indicator Status of the car kit Red and blue LEDs flash alternately Pairing mode Blue LED flashes once every 1 second Not connected to a Bluetooth device Blue LED flashes once every 5 seconds Connected to a Bluetooth device or conversation mode Blue LED flashes quickly Incoming call/calling  Care and maintenance Read the following recommendations before using BTC009 Following these you will be able to enjoy our product for many years.  Keep it dry and don’t take it to damp places to avoid the product’s internal circuit being affected. 4
 Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.  Don’t expose the product to cold areas. It may damage the internal circuit board.  Don’t try to disassemble the product as it may get damaged if you are not professional.  Don’t let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged.  Don’t use intensive chemical products or detergent to clean the product.  Don’t scratch the surface with sharp things. In case the product doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem.  FAQs 1. Why can’t my cell phone find the car kit? Your cell phone will not be able to find the car kit if it is not in pairing mode. Please make sure the car kit is in pairing mode and in the effective working range. 2. Why is the conversation quality bad? a) Make sure the cell phone has a strong signal; b) Ensure the car kit is in the effective working range. 3. How far is the effective range between the car kit and cell phone? According to the Bluetooth standard, the max. controllable range of a Class2 car kit is 10 meters. It varies under different environments. 4. Why is there no sound from the car kit’s loudspeaker during conversation? a) Please make sure the car kit is successfully connected to the cell phone; b) Ensure the car kit’s volume has been set to a proper position. 5
 Specification Bluetooth version Bluetooth V 2.0 Bluetooth profiles Headset and Hands-free Effective range 10 meter Power supply DC 12-24V 100 mA Working temperature -10 45 Storage temperature -20~60 Dimensions 72×50×38mm Weight 48g Notes: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 6

Navigation menu