Zhongshan K mate General Electronics BTH002 Bluetooth Stereo Headset User Manual BTH002 rev3

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Stereo Headset BTH002 rev3

UserManual.wiki >

Zhongshan K mate General Electronics >

BTH002 User Manual

User Manual

2) Pairing with Bluetooth music devices and Bluetooth transmitter which support A2DP,  Enjoy music wirelessly  Adjust volume  Remote control the function of pause/revert to play  Remote control last/next song 3) Easy to switch between conversation and music, you will not miss the incoming call during listening to music. 4) Automatic connecting with the last paired device when turn on the headset. Note:: Even though the paired device and headset support the same Bluetooth profiles, the functions may be different due to the specification difference of the paired devices.  Before using 1 Overview 1) Retractable string

2) < key :last song 3) > key :next song 4) LED Indicator 5) Multifunction button (MFB):turn on/off the headset, answer, end and reject call, mute, voice dial and switch conversation, redial last number, pause and revert to play. 6) + key: volume up 7) –key: volume down 8) Charging port 9) Built-in microphone 2 Charging the headset First time charging Before you use this Bluetooth headset, please charge the battery of BTH002 full. Next time When you hear a warning tone of “beep” every 20 seconds, at the same time, the red light blinks. It means the battery is low power and need to be charged. There is one way to charge as below: Charging the battery with USB cable Step1: Insert USB charging cable into USB outlet of PC. Step2: Connect charging cable with the charging port of headset. When the red light is on, the headset is charging. When the red light is off, the headset is charged full. Step3: It takes about 2.5 hours to charge the headset full. Warning: 1,The battery is recycled. 2,Do not dispose of the battery in fire, as it may cause explosion.

 How to use 1. Switching on / off headset Function Operation LED indicator Tone indication Switch on Press the MFB for 3-5 seconds, and release till the blue light blinks. The blue light blinks quickly 4s a time. A “DI” tone Switch off Press the MFB for 3-5 seconds, and release till the red light blinks. The red light blinks quickly 4s a time. A “DI” tone Remark: The headset will switch off automatically if no devices was connected after 5 minutes, in order to save power. 2 Pairing with Bluetooth device 1) How to enter into pairing mode Function Operation LED indicator Tone indication Enter into pairing mode Make sure the headset is off. Or switch off the headset firstly. Press and hold the MFB for 5-7 seconds, and release the key till the red and blue light blink alternately’ The red and blue lights blink alternately. Two tone “Du Du” Note: The pairing mode will last 2 minutes, If the headset still can’t pair with any Bluetooth devices after 2 minutes, it will switch into standby mode automatically. 2) Pairing with Bluetooth mobile phone Please make sure your mobile phone has Bluetooth function that can be used. Specific pairing procedures may vary with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows: a) Please keep the headset and mobile phone in the range of 1 meter when

pairing. b) Make the headset enter into pairing mode.(Please refer to “how to enter into pairing mode”) c) Start the Bluetooth function of mobile phone and search the Bluetooth devices. After searched, select “BTH002”in the Bluetooth device list. d) According to indication, enter password or PIN No:”0000”,and press the key of” Yes” or “confirmed”. e) After successful pairing, select “BTH002”.in the Bluetooth device list. and press “connect”. f) After successful connecting, the blue light of the headset blinks twice every 4 seconds.. Note:  If the pairing is not successful, please switch off headset firstly, and then re-pair according to the step a-f mentioned above..  After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when use next time.  The headset will connect with the latest paired device. If you want to pair with other Bluetooth devices, please switch off the Bluetooth function of the current Bluetooth device, and then pair and connect it with the new Bluetooth device according to steps a-f mentioned above. 3) Pairing with Bluetooth transmitter You can enjoy music wirelessly through connecting headset with stereo Bluetooth transmitter,. Here take BH1000-6 (single sale) iPod general Bluetooth transmitter for example. Pairing steps as follows: a) Keep the Bluetooth transmitter and headset in the range of 1 meter when pairing. b) Make the headset enter into pairing mode (refer to “How to enter into pairing mode) c) Turn on the Bluetooth transmitter. It will search Bluetooth device automatically and start pairing. d) When the headset requests PIN No, the Bluetooth transmitter need to respond “0000” automatically e) After successful pairing and connecting, the blue (or red) light of headset blinks twice every 4 seconds. Note: 1. The pairing password of BTH002 is “0000”, so, the headset can’t pair with the Bluetooth transmitter which pairing password is not “0000”. 2. If the pairing is still not successful after trying several times, please refer to your Bluetooth transmitter manual carefully..

Redial last number Standby mode press the MFB twice A short tone “DU” Turn up volume Conversation mode Short press or long press + key Nothing Turn down volume Conversation mode Short press or long press - key Nothing Answer calling Ringing Short press the MFB A short tone “DU” Reject calling Ringing Press and hold the MFB for 2s, and release the key till you hear the indication sound A short tone “DU” End calling Conversation mode Short press the MFB A short tone “DI” Switch conversation between headset and cell phone Conversation mode Press and hold the MFB for 2s, release the key till you hear the indication sound A short tone “DU” Microphone mute Conversation mode Quickly press the MFB twice “Du”” Du” tone every 5s Cancel mute Conversation mute Quickly press the MFB twice Nothing Warning: Warning: Warning: Warning: :::: EEEExcessive pressure form earphones and headphones can cause hearing loss.xcessive pressure form earphones and headphones can cause hearing loss.xcessive pressure form earphones and headphones can cause hearing loss.xcessive pressure form earphones and headphones can cause hearing loss. Remark:  Not all the mobile phones support all the functions listed above. Please refer to the instruction of your mobile phone.  When the volume is adjusted to max or min, you will hear a indication sound of “Ding-Dong”.  For some mobile phones, when you press the key of accepting on the phone, the conversation will be sent to the mobile phone. At this time, you can switch the call to headset by using the conversation switch button or through operating on the mobile phone. Please refer to the instruction of your mobile phone for further information. 5 Playing music When the headset connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music through headset wirelessly.. Function Status of headset Operation Indication

Volume up Playing music Short press or long press + key nothing Volume down Playing music Short press or long press - key nothing Pause Playing music Short press the MFB A short tone “du” Revert Pause Short press the MFB A short tone “du” Last song Playing music Short press < key A short tone “du” Next song Playing music Short press> key A short tone “du” Warning: Warning: Warning: Warning: EEEExcessive pressure form earphones and headphones can cause hearing loss.xcessive pressure form earphones and headphones can cause hearing loss.xcessive pressure form earphones and headphones can cause hearing loss.xcessive pressure form earphones and headphones can cause hearing loss. Remark:  For some of mobile phones, when they are playing music, the music will transmit to the speaker of mobile phone, you have to choose “transmit the sound through Bluetooth” in the “setting” of music play interface, and then choose “BTH002” in the device list, the music will be transmitted to the headset. Please refer to the instruction of your mobile phone for further information.  When the volume of headset is adjusted to max. or min, you will hear a tone of “Ding-Dong”  Remote control the function of last song/next song/pause/revert, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter. for further information. 6 LED indicator 1) Charging LED indicator Status of headset Red light is on Charging Red light is off Finish charging 2) Pairing with the Bluetooth devices LED Indicator Status of headset Red and blue light blink alternately Pairing mode Blue light (blue light will turn red if low power) blinks twice every 2 seconds. Standby mode (paired, but not connected with the Bluetooth device) Blue light (blue light will turn red if low Standby mode(connected with the

power,) blinks twice every 4 seconds Bluetooth device) Blue light blinks (blue light will turn red as low power,) 3 times every second Ringing Red light (blue light will turn red if low power) blinks 1 time every 2 seconds Conversation mode 7 Tune Indications Indication tune Status of headset Two tones every 5 seconds Conversation mode and microphone mute A tone “DU” every 20 seconds Low power  Care and maintenance Please read the following suggestions carefully, that will help you to fulfill any warranty obligations and to enjoy this product for many years.  Keep dry and don’t put it in the dump place, in case of effecting the interior circuit of product  Don’t put the product under the sunlight or place hot areas. High temperature will short the life of electronic device, destroy the battery, or distort certain plastic.  Don’t expose the product in the cold areas. This may damage the internal circuit board.  Don’t try to take apart the product. It may damage the product if you are not professional.  Don’t fall off on the floor or knock the hard substance, it may damage interior circuit.  Don’t use intensify chemical or detergent to clean the product.  Don’t scrap the surface with sharp things  If the product can’t work normally, please sent it to the regularly asserted store, the staff will help you to solve problem warmly.  FAQ 1 Q: What does it mean when red indicator light is on ? A: Battery is low, need to be recharged

Dimension 162*153.5*32 mm Weight Approx. 103 g Note: This Bluetooth stereo headset complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This Bluetooth stereo headset may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. NoteNoteNoteNote Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.