Zhongshan K mate General Electronics BTH002NI Bluetooth Stereo Headset User Manual 15 BTH002NI UserMan

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Stereo Headset 15 BTH002NI UserMan

UserManual.wiki >

Zhongshan K mate General Electronics >

BTH002NI User Manual

15_BTH002NI UserMan

BTH002NI Bluetooth stereo headset User’ manual

Content  Brief introduction………………………………………………….......…1 1. Bluetooth wireless communication technology……………….……...….1 2. About BTH002NI………………………………………..…………....1  Before using…………………………………...…………………………2 1. Overview……………………………………………………………...….2 2. Charging the headset………………………………………..................…3  How to use……………………………………..…………………….…..3 1. Turning on/off the headset……………………………………....…….....3 2. Pairing the headset with Bluetooth devices……………………….……..4 How to enter pairing mode…………………………………………….....4 Pairing the headset with Bluetooth mobile phone………………….…….4 Pairing the headset with Bluetooth transmitter……………………..….…5 3. Reconnecting to a Bluetooth device…………...…………………….…..5 4. Wearing the headset…………………………………………...……..…..6 5. Making calls with the headset…………..…………………………..…....6 6. Playing music…………………………………………………………….8 7. Restoring factory defaults and resetting……………………………..…..9 8. LED indicator………………………………………………..................10 9. Indication tone…………………………………………………….…....10  Care and maintenance………………......…………………..……….….10  FAQs………………………………………….…………..…….………11  Specifications……………………………………………....…………...12

3) Easy to switch between conversation and music, you will not miss the incoming call during listening to music. 4) Automatic connecting with the last paired device when turn on the headset. Note: Even though the paired device and headset support the same Bluetooth profiles, the functions may be different due to the specification difference of the paired devices.  Before using 1. Overview 1 Left speaker 7Next song2 Right speaker 8LED indicator3 Retractable headband9MFB button: music pause/play4 Last song10 Volume up5 Volume down 11 Built-in microphone 6 Charging jack 2

2. Charging the headset The headset comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the headset is low power, the headset emits“Dongdong” tones and the red LED flashes twice every 20 seconds. Please recharge the battery of the headset. The way of charging as following: Using USB cable 1. Plug one side of USB cable into the USB port of PC 2. Plug the other side of cable to the charging jack of headset Red light on: Charging Red light off: Finish charging 3. It will takes about 1.5 hours to finish charging Warning: 1) The battery is recyclable. 2) Do not dispose of the battery in fire, as it may cause explosion.  How to use 1. Turning on / off headset Function Operation LED indicatorTurning on Press the MFB button about 4 seconds, and release it till the blue LED flash Blue LED is on for 1 second Turning off Press the MFB button about 4 seconds, and release it till the red LED flash Red LED is on for 1 second Note: In order to save power, the headset will automatically turn off if no devices can be connected within 5 minutes after turning on. 3

2. Pairing the headset with Bluetooth devices How to enter pairing mode Function Operation LED indicatorEntering pairing mode Make sure the headset is off, otherwise please turn it off first. Press and hold MFB button about 8 seconds, and release it till the red and blue LED flashes alternatelyRed and blue LEDs flashes alternately Note: The pairing mode will last 2 minutes, if the headset still can’t pair with any Bluetooth devices after 2 minutes, it will switch into standby mode automatically. Pairing the headset with Bluetooth mobile phone Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows: 1) Keep your headset and phone within 1 meter when pairing; 2) Make the headset enter pairing mode (please refer to “How to enter pairing mode); 3) Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select “BTH002NI” from the list of devices shown; 4) According to the indication, enter password or PIN No: “0000”. ( If the mobile phone supports Bluetooth V2.1, password is not required.). If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models); 5) After successful paired, choose and connect “BTH002NI” from the list of devices shown on cell phone; 6) After successful connecting, blue LED of headset will flashes twice every 5 seconds Notes:  If pairing is failed, please turn off the headset first and then re-pair according to steps 1～6 mentioned above. 4

 After pairing is successful, the headset and the cell phone will remember each other, they will no need to re-pair next time. The headset can remember 8 paired devices, when the number of paired devices exceeds 8, the first one will be replaced.  Every time the headset is turned on, it will connect to last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the headset with the new device according to steps 1～6 mentioned above. Pairing the headset with Bluetooth transmitter You can enjoy music wirelessly through connecting headset with stereo Bluetooth transmitter. Hereby take BTT005 (Bluetooth transmitter, not included in accessories) for example. The pairing steps are as follows: 1) Keep your headset and transmitter within 1 meter when pairing; 2) Make the headset enter pairing mode (Please refer to “How to enter pairing mode); 3) Turn on the Bluetooth transmitter and make it enter pairing mode. It will search for Bluetooth devices automatically and send a pairing request; 4) When the headset requests to enter a PIN No., the transmitter will response “0000” automatically; 5) After successful pairing and connecting, blue LED of the headset flashes twice every 5 seconds. Notes: 1) The pairing password of BTH002NI is “0000”, so, the headset can only pair with the Bluetooth transmitter which pairing password is “0000”. 2) If the pairing is still not successful after trying several times, please refer to your Bluetooth transmitter manual carefully. 3. Reconnecting to a Bluetooth device 1) Automatic connecting Every time the headset is turned on, it will connect to last connected device automatically. 5

End call During a call Short press MFB once Volume up During a call Short press “+” button Volume down During a call Short press “－” button Call transfer to mobilephone During a call Long press MFB about 2 secondsCall transfer to headset During a call Long press MFB about 2 secondsMicrophone mute During a call Double click MFB buttonCancel mute During a call(microphone mute) Double click MFB buttonVoice dial Standby mode(connected with device)Long press MFB button about 2 seconds and release it until hear a prompt toneRedial last number Standby mode(connected with device)Double click MFB buttonDelete paired list Turn off Long press MFB and “+” button about 11 seconds and release it until all LED indicator light off Three-ways call operation Functions Status of headset OperationAnswer new call and end current call There is seconds incoming call Short press MFB button once Answer new call and retain current call There is seconds incoming call Double click MFB button Switch call During a call, one of call is retained Double click MFB button End current call and back to retain call During a call, one of call is retained Short press MFB button once Warning: Excessive pressure from headphones can cause hearing loss. 7

Notes:  Not all the mobile phones support all the functions listed above. Please refer to the instruction of your mobile phone.  Some functions and indication tones may vary with different mobile phones.  When the volume is adjusted to max or min, you will hear one indication tone.  When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to the headset by using the conversation switch button or through operating on the mobile phone. Please refer to your mobile phone user manual for further information. 6. Playing music When the headset connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music through headset wirelessly. Function Status of the headset Operation Volume up Playing music Short press “+” button Volume down Playing music Short press “－” button Last song Playing music Short press < button Next song Playing music Short press > button Pause Playing music Short press MFB once Play Pausing music Short press MFB once Fast forward Playing music Long press > button Fast rewind Playing music Long press < button 8

Notes:  For some of mobile phones, when they are playing music, the music will transmit to the speaker of mobile phone, you have to choose “transmit the sound through Bluetooth” in the “setting” of music play interface, and then choose “BTH002NI” in the device list, the music will be transmitted to the headset. Please refer to the instruction of your mobile phone for further information.  When the volume of headset is adjusted to max or min, you will hear an indication tone.  Remote control the function of last/next song, fast forward/rewind, pause/play, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter for further information. 7. LED indicator 1) Charging LED indicator Status of the headsetRed LED is on Charging Red LED is off Finish charging 2) Pairing with the Bluetooth devices LED Indicator Status of the headsetRed and blue LEDs blink alternately Pairing modeBlue LED quickly blinks onceevery 2 seconds. Not connected to a deviceBlue LED quickly blinks twice every 5 seconds Set up HFP and A2DP connectionBlue LED quickly blinks three times every 5 seconds Calling/ incoming call Blue LED quickly blinks continuously Conversation mode Red LED blinks twice every 20 seconds Low power 9

8. Indication tone Indication tone Status of headsetOne “Weng”tone every 3 seconds Conversation mode and microphone mute “Dongdong” tones every 20 seconds Low power 9. Factory reset In the status of turn off, long press MFB and volume up “+” button about 11 seconds and release it until all LED indicator light off. Remarks: After factory reset, the paired list of headset will be deleted. After turn on the headset again, it will enter pairing mode automatically, you need to pair and connect the headset with device again.  Care and maintenance Please read the following suggestions carefully, that will help you to fulfill any warranty obligations and to enjoy this product for many years.  Keep dry and don’t put it in the dump place, in case of affecting the interior circuit of product.  Don’t put the product under the sunlight or place hot areas. High temperature will short the life of electronic device, destroy the battery, or distort certain plastic.  Don’t expose the product in the cold areas. It may damage the internal circuit board.  Don’t try to take apart the product. It may damage the product if you are not professional.  Don’t fall off on the floor or knock the hard substance. It may damage interior circuit.  Doesn’t use intensify chemical or detergent to clean the product.  Don’t scrap the surface with sharp things.  Don’t use this product during strenuous exercise. It may damage the product if the sweat into product. In case the product doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem. 10

 Specifications Bluetooth version Bluetooth V3.0Bluetooth profiles Headset, Hands free, A2DP, AVRCPEffective range10 metersWorking time About 9 hoursStandby time About 400 hoursCharging input DC 5V/500mACharging time About 1.5 hoursDimensions 162×153.5×32 mm Weight About 99 g CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS TO THE INSTRUCTIONS To prevent possible hearing damage,do not listen at high volume levels for long periods 12

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser'sauthoritytooperatetheequipment.