Zhongshan K mate General Electronics BTH015 Bluetooh Stereo Headset User Manual

Zhongshan K-mate General Electronics Co., Ltd Bluetooh Stereo Headset Users Manual

UserManual.wiki >

Zhongshan K mate General Electronics >

BTH015 User Manual

Users Manual

BTH015 Bluetooth stereo headset User’s manual

Contents  Brief introduction………………………………….…………...…1 1. Bluetooth wireless communication technology…...………….….....1 2. About BTH015………………………………..…….………….…..1  Before use…………………………………………………...……..2 1. Overview……………………………..………………..…………...2 2. Charging the headset………………………….………………....…3  Getting started.……………………………….………….………..3 1. Turning on/off the headset……………….……….……………...…3 2. Pairing the headset with Bluetooth devices…………………..….....4 How to enter pairing mode……………………..……………….....4 Pairing the headset with a Bluetooth cell phone…...............…........4 Pairing the headset with a Bluetooth transmitter..………………....5 Multi-pairing………………………………………………….…....6 3. Re-connecting with a Bluetooth device………………………...…..6 4. Wearing the headset…………………………………………….…..7 5. Making a call with the headset…………………………..………....7 6. Music playback………………………………………..……….…...9 7. LED indicator…………………………………………….………..10 8. Indication tone………………………...………………..…...…..…11  Care and maintenance……………………..……………….….…11  FAQs…………………………………………………..……..….…11  Specifications……………………………………..…….....……....13

3) Easy to switch between the call and music, you will not miss the incoming call during listening to music. 4) Every time the headset is turned on, it will connect to last connected device automatically. Note: Even though the paired device and the headset support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices.  Before use 1. Overview 2 1 Foldable and retractable headhand 2 + button: Volume up 3 ﹤button: Previous track 4 ﹥button: Next track 5 Built-in microphone 6 LED indicator 7 Multi-function button (MFB): Power on/power off/answer a call/end a call/reject a call/microphone mute/call transfer/redial last number/voice dial/pause/play 8 Charging jack 9 – button: Volume down

2. Charging the headset The headset comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the headset is low power, red LED flashes twice and the headset emits three “Dong” tones every 20 seconds. Please recharge the battery of the headset. Connect the USB cable to a computer USB port and the USB cable plug to the charging jack of the headset. Red LED is on while charging. It takes about 3 hours to charge the battery fully. When charging has completed, red LED will be off. Remarks: 1) The battery is recyclable. 2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like.  Getting started 1. Turning on/off the headset Function Operation LED indicator Power on Press and hold MFB button for 3～5 seconds until blue LED flashes Blue LED is on for 1 second Power off Press and hold MFB button for 3～5 seconds until red LED flashes Red LED is on for 1 second 3 Remark: In order to save power, the headset will turn off automatically if no devices can be connected after 5 minutes. 2. Pairing the headset with Bluetooth devices How to enter pairing mode Function Operation LED indicator

Entering pairing mode Ensure the headset is turned off, otherwise turn it off first and then press and hold MFB button for 6～7 seconds until LED flashes red and blue alternately LED flashes red and blue alternately Remark: Pairing mode will last 2 minutes. If no devices can be connected after 2 minutes, it will return to standby mode automatically . Pairing the headset with a Bluetooth cell phone Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows: 1) Place the headset and Bluetooth cell phone where they are easily viewable by no more than 1 meter apart; 2) Enter the headset’s pairing mode (please refer to “How to enter pairing mode); 3) Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select “BTH015” from the list of devices shown; 4) According to the indication, enter password or PIN No: “0000”; 5) If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models); 6) After successful connecting, blue LED flashes twice or three time every 4 seconds. You should now be able to make and receive a call using the headset. Remarks:  If pairing is failed, please turn off the headset first and then re-pair according to steps 1～6 mentioned above. 4  After pairing is successful, the headset and the cell phone will remember each other, they will no need to re-pair next time. The headset can remember 8 paired devices, When the number of paired devices exceeds 8, the first one will be replaced.  Every time the headset is turned on, it will connect to last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the

Function Status of BTH015 Operation Cancel calling Calling Short press MFB button Answer a call Incoming ring Short press MFB button Reject a call Incoming ring Press and hold MFB button for 2 seconds and release it until hearing indication tone End a call During a call Short press MFB button Volume up During a call Touch＋button, when touch ＋ button all the time, the volume will increase continuously Volume down During a call Touch－button, when touch －button all the time, the volume will reduce continuously Call transfer (headset to mobile phone) During a call Press and hold MFB button for 2 seconds and release it until hearing indication tone Call transfer (mobile phone to headset) During a call Press and hold MFB button for 2 seconds and release it until hearing indication tone Microphone mute During a call Short press MFB button twice Cancel mute During a call (microphone mute) Short press MFB button twice 7 Function Status of BTH015 Operation Voice dial Standby mode and connected to a device Simultaneously press and hold MFB buttons for 2 seconds and release them until hearing indication tone

Redial last number Standby mode and connected to a device Short press MFB button twice Lock/unlock the buttons Standby mode Simultaneously press and hold MFB and＋buttons for 2 seconds and release them until hearing indication tone Clear pairing list Charging Firstly press and hold MFB button and then press and hold －button for 5 seconds, and release them until red LED flashes once 2) Three-way call Function Status of BTH015 Operation End current call and answer a new incoming call There is a new incoming call Short press MFB button once Keep current call and answer a new incoming call There is a new incoming call Short press MFB button twice Call transfer During a call（keep another call） Short press MFB button twice End current call and switch to reserved call During a call（keep another call） Short press MFB button once Warning: Excessive pressure from earphones and headphones can cause hearing loss. 8 Remarks:  Not all cell phones support all functions listed above. Please refer to your cell phone’s user’s manual for further information.  Certain functions and indication tones maybe vary with different models of cell phones.  When the volume is adjusted to max. or min., you will hear a indication

7. LED indicator 1) When the headset is charging LED indicator Status of the headset Red LED is on Charging in progress Red LED is off Finish charging 2) When the headset connected to a Bluetooth device LED indicator Status of the headset LED flashes red and blue alternately Pairing mode Blue LED flashes once every 3 seconds Not connected to a Bluetooth device Blue LED flashes twice every 5 seconds Connected to a HFP device or A2DP device) Blue LED flashes 3 times every 5 seconds Simultaneously connected to a HFP device and A2DP device Blue LED flashes twice or 3 times every 5 seconds Calling Blue LED flashes twice every 4 seconds Incoming ring Blue LED flashes once every 5 seconds During a call Red LED flashes twice every 20 seconds Low power 10 8. Indication tone Indication tone Status of BTH015 Two short “DU” tones Enter pairing mode Emits 2 tones every 5 seconds During a call (Microphone mute)

Emits 3 “Dong” tones every 20 seconds Low power  Care and maintenance Read the following recommendations before using the headset. Following these you will be able to enjoy the product for many years.  Do not expose the headset to liquid, moisture or humidity to avoid the product’s internal circuit being affected.  Don’t use abrasive cleaning solvents to clean the headset.  Do not expose the headset to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.  Don’t dispose of the headset in a fire as it will result in an explosion.  Don’t expose the headset to contact with sharp objects as this will cause scratches and damage.  Don’t let the headset fall down onto the floor. The internal circuit might get damaged.  Don’t attempt to disassemble the headset as it may get damaged if you are not professional. In case the headset doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem.  FAQs 1 Why does red LED flash twice every 20 seconds? The headset is low power, it needs to be recharged. 2 Why isn’t red LED on when charging? a) Please make sure the USB charger connects well with the headset; b) When you didn’t use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be on. 11 3 How far is the effective range between the headset and Bluetooth cell phone? According to the Bluetooth standard, the max. controllable range of Class II headset is 10 meters. It varies under different environment.

Talk: Up to 11 hours Standby time 200 hours Charing input DC 5A 130mA Charging time About 3 hours Dimensions 158×156×55mm Weight 103 g Notes: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 13