Zhongshan K mate General Electronics BTH018 Bluetooth Stereo Headset User Manual 1 BTH018 User s Manual

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Stereo Headset 1 BTH018 User s Manual

UserManual.wiki >

Zhongshan K mate General Electronics >

BTH018 User Manual

Users Manual

BTH018 User’s Manual Content  Brief introduction…………...…………………………..…...1 1. Bluetooth wireless communication technology……...……………..1 2. About BTH018…………………………………………………...1  Before use……………………………………………………..2 1.Overview…………………………………………………………2 2. Charging for Headsets……………………………………………3  Using the headsets……………………………………………4 1. Turn on/off the headsets………………………………………………...4 2. Pairing headsets with Bluetooth devices……………………………….5 1) How to entering pairing mode……………………………………….5 2) Pairing headsets with Bluetooth devices…………………………….5 3) Pairing headsets with Bluetooth transmitter……………………….6 4) Pairing headsets with Multi-devices…………………………..…….7 3. Reconnect the headsets with devices…………………………………...7 4. Wearing the headset………………………………………………….…8 5. Making calls with the headset………………………………………….8 6. Playing music……………………………………………………….….10 7. LED indicator…………………………………………………………..11 8. Indication tone………………………………………………………….12  Care and maintenance…………………………………...………..12  FAQs…………………………………………………………………..13  Specification…………………………………………………..……..14

2 2) Pairing with Bluetooth music devices and Bluetooth transmitter which support A2DP.  Enjoy music wirelessly  Adjust the volume  Remote control pause/ play  Remote control last/next song 3) Easy to switch between conversation and music, you will not miss the incoming call during listening to music. 4) Every time the headset is switched on, it will automatically connect to the last paired device. Note: Even though the paired device and headset support the same Bluetooth profiles, the functions may be different due to the specification difference of the paired devices.  Before use 1.Overview

3 1 Status indicator light 5Built-in microphone2 Charging jack6Volume up/previous track3 Left speaker7Multifunction button4 Right speaker8Volume down/next track 2. Charging for Headsets First time charging： Before you use this Bluetooth headset, please charge the battery of BTH018 fully. Low power： When you hear three “DONG” tones every 20 seconds, at the same time, the red LED blinks twice. It means the battery is low power and need to be charged.

4 There are two ways of charging for headset: Using travel charger: 1. Plug charger into standard AC power socket 2. Plug another side of charger jack into charging port of the headset RED light on→Charging RED light off→Finish charging 3. It will take about two hours to finish charging Using USB cable charger: 1. Plug USB cable into USB port of PC 2. Plug another side of USB cable into charging port of the headset RED light on→Charging RED light off→Finish charging 3. It will take about two hours to finish charging Note: Choosing travel charger or USB cable depends on different countries or areas and actual demands. Warning: 2) The battery is recyclable. 3) Do not dispose of the battery in fire, as it may cause explosion.  Using the headsets 1. Turn on/off the headsets Function Operation Indicator lightTurn on Press multifunction button about 3~5seconds and release it till the blue light blinksBlue light on 1 second Turn off Press multifunction button about 3~5seconds and release it till the red light blinksRed light on 1 second

5 Note: The headset will turn off automatically if it can not connect any devices within 5 minutes after turn on so that it can save power. 2. Pairing headsets with Bluetooth devices 1) How to entering pairing mode Function Operation Indicator lightEnter pairing mode Make sure the headset is turned off, if not,please thrn it off first. Press multifunction button about 6~7seconds, and release it till blue light and red light blink alternately.Blue light and Red light blink alternately. Note: Pairing mode will last 2 minutes, if the headset can not connect any other devices after 2 minutes, it will switch standby mode automatically. 2) Pairing headsets with Bluetooth devices Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows:  Please keep the headset and mobile phone within 1 meter when pairing  Make the headsets enter pairing mode(please refer to “How to entering pairing mode”  Activate your mobile phone’s Bluetooth function and search Bluetooth devices within available range, and select “BTH018” from the list of devices shown after search  According to the indication, enter password or PIN No: “0000”, and

6 press “Yes” or “Confirm” button to confirm  After pairing sucessfully, choose “BTH018” from the list of device shown and connect it  After connect sucessfully, headsets’s blue light blinks twice every 4 seconds or blinks three times every 4 seconds Note:  If the pairing is not successful, please switch off headset firstly, and then re-pair according to the steps 1-6 mentioned above.  After pairing is successful, the headset and the mobile phone will remember each other, they will no need to re-pair next time.The headset can remember 8 paired devices, when the number of paired devices exceeds 8, the first one will be replaced.  If you want to pair the headset with other devices, please pair it with the new device according to steps 1～6 mentioned above. 3) Pairing headset with Bluetooth transmitter You can pairing headset with Bluetooth transmitter to enjoy wirelessly music. Hereby take BTT001 (Bluetooth transmitter for iPod, not included) for example. The pairing steps are as follows:  Keep the Bluetooth transmitter and the headset within 1 meter when pairing;  Make the headset enter pairing mode (please refer to “How to enter pairing mode);  Switch on the Bluetooth transmitter, it will search Bluetooth device automatically and start pairing;  When the headset requests PIN No., the Bluetooth transmitter will respond “0000” automatically;  After successful pairing and connecting, blue light of the headset blinks twice every 4 seconds.

8 multi-function button, the headset will try to connect the last connected HFP devices.  When the headset not connect A2DP device, please long press “―” for two seconds, the headsets will try to connect the last connected A2DP devices. 4. Wearing the headset As per the following pictures show, hang the headset on the ears with your both hands. You must use both hands to put on or take off the headset, don’t pull or push the headset. 5. Making calls with the headset 1) Basic conversation operation Function Status of the headset OperationCancel call Calling mode Short press multifunction button one timeAnswer call Ringing Short press multifunction button one time

9 Reject call Ringing Long press multifunction button for about 2 seconds and release it till you listen prompt toneEnd call Conversation mode Short press multifunction button one timeVolume up Conversation mode Short press “+”buttonVolume down Conversation mode Short press “―”buttonCall transfer to mobile-phone Conversation mode Long press multifunction button for 2 seconds Call transfer to earphone Conversation mode Long press multifunction button for 2 seconds Microphone mute Conversation mode Double-click multifunction buttonCancel mute Conversation mode(Microphone mute)Double-click multifunction buttonVoice dial Standby mode(have already connect with device)Long press multifunction button for 2 seconds Redial last number Standby mode(have already connect with device)Double-click multifunction button Delete pairing list Power off Press multifunction button and “+”button at the same time for 8 seconds and release it till blue light and red light on at the same time for 1.5 second

102) The operation of three-way call Function Status of the headset OperationAnswer new call and end current call There are second incoming call Short press multifunction button Answer new call and retain current call There are second incoming call Double-click multifunction button Switch call Keep conversation Double-click multifunction buttonEnd current call and switch retain call Keep conversation Short press multifunction button Warning: : Excessive pressure form earphones and headphones can cause hearing loss. Note:  Not all the mobile phones support all the functions listed above. Please refer to your mobile phone user’s manual.  Different function and prompt tone according to different mobile phone.  When the volume is adjusted to max or min, you will hear a prompt tone.  When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to the headset by using the conversation switch button or through operating on the mobile phone. Please refer to your mobile phone user manual for further information. 6. Playing music When the headset connects to a mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music wirelessly through the headset. Function Status of the headset OperationVolume up Palying music Short press “+”buttonVolume down Palying music Short press “―”button

12Blue light quick blink continuouslyCalling/incoming callBlue light quick blink one time every 4 seconds Conversation modeRed light quick blink twice every 30 seconds Low battery 8. Indication tone Indication tone Status of the headsetContinuous two indication tone every 5 seconds Conversation mode and microphone muteThree “dong” warning tone every 30 seconds Low battery  Care and maintenance Read the following recommendations carefully before using BTH018. Following these you will be able to enjoy this product for many years.  Keep it dry and don’t put it in the dump place to avoid the product’s internal circuit being affected.  Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.  Don’t expose the product to cold areas. It may damage the internal circuit board.  Don’t try to disassemble the product as it may get damaged if you are not professional.  Don’t let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged.  Don’t use intensive chemical products or detergent to clean the product.  Don’t scratch the surface with sharp things. In case the product doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem

14  Specifications Bluetooth version Bluetooth V2.1+EDRBluetooth profiles Headset, Handsfree, A2DP, AVRCPOperating distance 10metersHeadset working time Music: up to 7 houursTalk: up to 8 hoursHeadset standby time Approx 180 hoursCharging input DC5.0V130mAHeadset charging time Approx 2 hoursDimension 132*134.5*61mmWeight Approx 35.3g Notes: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.