Zhongshan K mate General Electronics BTH023 Bluetooth Stereo Headset User Manual BTH023 User s Manual

Download:
Mirror Download [FCC.gov]
Document ID	1868604
Application ID	YEXLOlBenxE47yM/QWPKCA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.54kB (156753 bits)
Date Submitted	2012-12-27 00:00:00
Date Available	2012-12-27 00:00:00
Creation Date	2012-12-20 16:59:48
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-12-20 16:59:48
Document Title	Microsoft Word - BTH023 User's Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

BTH023
Bluetooth stereo headset
User’s manual
Contents
 Brief introduction…………...…………………………..…....1
1. Bluetooth wireless communication technology……………….…....1
2. About BTH023…………………………………………………...1
 Before use……………………………………………………..2
1. Overview…………………………………………………...……2
2. Charging for Headset..……………………………………………3
 Getting started……..…………………………………………3
1. Turning on/off the headset…………....………………………......3
2. Pairing headset with Bluetooth devices…….…………………..….4
1) How to enter pairing mode………………….………………….4
2) Pairing headset with Bluetooth cell phone…………………..….4
3) Pairing headset with Bluetooth transmitter………..…………....5
4) Pairing headset with Multi-devices………….………………….5
3. Reconnecting the headsets with devices………………………....6
4. Making a call with the headset………………………………….6
5. Playing music……………………………………………….…...9
6. LED indicator…………………………………………………..9
7. Indication tone………………………………………………….10
8. Factory Reset………………………………………………..….10
 Care and maintenance……………………………..………..10
 FAQs……………………………………...…………………..11
 Specification……………………………...………………..…12
Welcome to use this Bluetooth stereo headset, BTH023. Please read this
user’s manual carefully before use.
 Brief introduction
1. Bluetooth wireless communication technology
Bluetooth is a standard of close range wireless communication technology
that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With
Bluetooth technology, we can achieve the highest transmission rate among
cell phones, computers, printers, PDAs and other devices. The max
transmission range of class II is 10 meters while the max transmission
ranges of class I can reach up to 100 meters.
2. About BTH023
BTH023 is a Bluetooth stereo headset. It supports the following Bluetooth
profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
You can enjoy music wirelessly by using BTH023. It has the following
features:
1) Pairing with a Bluetooth cell phone or PDA supporting HFP profile.
 Answer a call, end a call and reject a call
 Redial last number
 Voice dial
 Adjust the volume
 Call transfer between the headset and your Bluetooth cell phone
 Microphone mute
2) Pairing with a Bluetooth cell phone or Bluetooth transmitter supporting
A2DP profile.
 Enjoy music wirelessly
 Adjust the volume
 Remote control pause/play
 Remote control previous/next track
3) Easy to switch between the call and music, you will not miss the
incoming call during listening to music.
4) Every time the headset is turned on, it will connect to last connected
device automatically.
Note: In order to complete above function, the Bluetooth profiles of paired
device must be same as the headset. And even though the paired device and
the headset support the same Bluetooth profiles, functions may vary due to
specification differences of the paired devices.
 Before use
1. Overview
LED indicator
Charging jack
Multi-functions button(MFB):
pause /play
Volume down/next song
Built-in microphone
Right speaker
Volume up/last song
Left speaker
2. Charging for headset
The headset comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the headset is low power, the headset emits five “Dong” tones every 5
minutes and the red LED flashes instead of blue LED. Please recharge the
battery of the headset.
The way of charging as following:
Using USB cable
1. Plug the special charging clip into the
charging jack of headset, make it clip the
headset as pictures shown :
2. Plug another side of cable to the USB port
of PC
Red light on: Charging
Red light off: Finish charging
3. It will takes about 2 hours to finfish
charging
Remarks:
1) The battery is recyclable.
2) Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat place, such as sunshine, fire or the like.
 Getting started
1. Turning on/off the headset
Functions
Operation
LED indicator
Turning on
Press and hold MFB button
Blue LED on one
about 4 seconds until blue
second
LED flashes
Turning off
Press and hold MFB button
Red LED on one
about 4 seconds until red LED
second
flashes
Remark: In order to save power, the headset will turn off automatically if
no devices can be connected after 5 minutes.
2. Pairing the headset with Bluetooth devices
1) How to enter pairing mode
Functions
Operation
LED indicator
Entering
Ensure the headset is off,
Red and blue LED
pairing
otherwise please turn it off first.
flash alternately
mode
And then press and hold MFB
button about 8 seconds until red
and blue LED flash alternately
Remark: Pairing mode will last 2 minutes. If no devices can be connected
after 2 minutes, it will return to standby mode automatically.
2) Pairing headset with Bluetooth cell phone
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user’s
manual for further information. The general pairing procedures are as
follows:
1) Keep your headset and phone within 1 meter when pairing;
2) Make the headset enter pairing mode (please refer to “How to enter
pairing mode);
3) Activate your cell phone’s Bluetooth function and set your cell phone to
search for Bluetooth devices within range, and select “BTH023” from the
list of devices shown;
4) According to the indication, enter password or PIN No: “0000”. ( If the
mobile phone supports Bluetooth V2.1, password is not required.). If
prompted by your cell phone to connect, select “Yes” (this will vary
among cell phone models);
5) After successful paired, choose and connect “BTH023” from the list of
devices shown on cell phone;
6) After successful connecting, blue LED of headset will flashes twice
every 4 seconds
Remarks:
If pairing is failed, please turn off the headset first and then re-pair
according to steps 1～6 mentioned above.
 After pairing is successful, the headset and the cell phone will remember
each other, they will no need to re-pair next time. The headset can
remember 8 paired devices, when the number of paired devices exceeds
8, the first one will be replaced.


Every time the headset is turned on, it will connect to last connected
device automatically. If you want to pair it with other devices, please turn
off the Bluetooth function of last connected devices first and pair the
headset with the new device according to steps 1～6 mentioned above.
3) Pairing headset with Bluetooth transmitter
You can connect the headset to a Bluetooth transmitter to enjoy music
wirelessly. Hereby take BTT005 (Bluetooth transmitter, not included) for
example. The pairing steps are as follows:
1) Keep your headset and transmitter within
1 meter when pairing;
2) Make the headset enter pairing mode
(Please refer to “How to enter pairing
mode);
3) Turn on the Bluetooth transmitter and
make it enter pairing mode. It will search
for Bluetooth devices automatically and
send a pairing request;
4) When the headset requests to enter a PIN No., the transmitter will
response “0000” automatically;
5) After successful pairing and connecting, blue LED of the headset flashes
twice every 4 seconds.
Remarks:
 The pairing password of the headset is “0000”. So, the headset can only
pair with a Bluetooth transmitter whose pairing password is “0000”.
 If pairing still fails after several tries, please refer to the Bluetooth
transmitter’s user’s manual for further information.
4) Pairing headset with Multi-devices
The headset can connect with two Bluetooth devices at most. If you want to
finish the Multi-pairing, please refer to the following steps:
1) Firstly, pair and connect the headset with a Bluetooth device one (refer to
“pairing the headset with a Bluetooth cell phone);
2) Turn on the headset and make it enter pairing mode again, make the
headset pair and connect with Bluetooth device two (refer to “pairing the
headset with a Bluetooth cell phone);
3) Operate Bluetooth device one to connect with headset. Now, the headset
has already connected with two devices. The headset will connect with
last connected two devices automatically when you turn it on again.
Remarks:
After successful multi-pairing, the paired devices will remember each
other, they will no need to pair next time.
 The headset will connect with last connected two devices automatically
when you turn it on again.
 Turn off multi-pairing:in the status of standby mode（not connected
device）, long press MFB and volume down “—” button, and release it
until hear four fall tone.
 Turn on multi-pairing:in the status of standby mode（not connected
device）, long press MFB and volume up “+” button, and release it until
hear 4 raise tone.

3. Reconnecting the headset with devices
1) Automatic connecting
Every time the headset is turned on, it will connect to last connected device
automatically.
2) Manual connecting
When the headset is in standby mode and does’t connect to a device, short
press MFB button once, it will connect to last connected device.
Remarks:
 Before connecting to a Bluetooth device, please turn on the Bluetooth
function of Bluetooth device.
 On some Bluetooth devices, take some Nokia cell phones for example,
you have to allow automatic connecting in the cell phone’s settings.
Please refer to your cell phone’s manual for further information.
4. Making a call with the headset
1) Basic operation
Functions
Status of headset
Cancel a call
Calling
Answer a call
Incoming ringing
Operation
Short press MFB once
Short press MFB once
Reject a call
Incoming ringing
End a call
Volume up
Volume down
Transfer
conversation to
mobile phone
Transfer
conversation to
headset
Microphone
mute
Cancel mute
During a call
During a call
During a call
During a call
Voice dial
Redial the last
number
Remove paired
list
Long press MFB about 2
seconds and release it until
listen a tone
Short press MFB once
Short press+ button
Short press — button
Long press MFB about 2
seconds
During a call
Long press MFB about 2
seconds
During a call
Long press volume up “+”
button about 2 seconds
Long press volume down
“+” button about 2 seconds
Short press MFB and
volume up “+” button
simultaneously
Double click MFB button
During a call
(microphone mute)
Standby mode
(connected device)
Standby mode
(connected device)
Charging status
In the status of charging,
long press volume up “+”
button, red and blue LED
will flashes simultaneously
and you will hear four
“dong” tone
Warning: Excessive pressure form earphones and headphones can
cause hearing loss.
Note:
 Not all the mobile phones support all the functions listed above. Please
refer to your mobile phone user’s manual.
 Different function and prompt tone according to different mobile phone.
 When the volume is adjusted to max or min, you will hear one prompt
tone.
 When pressing the answer button on some mobile phones, the call will be
transferred to the mobile phone. You can switch the call to the headset by
using the conversation switch button or through operating on the mobile
phone. Please refer to your mobile phone user manual for further
information.
2) Three-ways call operation
Functions
Status of headsets
Answer new call and
There are second
end current call
incoming call
Answer new call and
There are second
retain current call
incoming call
Switch calls
Keep conversation
End current call and
switch retain call
Keep conversation
3) Making a call with two headsets
Functions
Status of headset
Retain phone 1 call
During phone 1 call,
and answer phone 2
phone 2 is incoming
call
call
End phone 1 call and
During phone 1 call,
answer phone 2 call
phone 2 is incoming
call
Switch call
During call, one of
phone call is retained
End current phone
During call, one of
call, back to retain
phone call is retained
phone call
Operation
Short press MFB
once
Double click MFB
button
Double click MFB
button
Short press MFB
once
Operation
Double click MFB
button
Short press
button once
MFB
Double click MFB
button
Short press MFB
button once
5. Playing music
When the headset connects to a mobile phone or Bluetooth transmitter
which supports A2DP, you can enjoy music wirelessly through the headset.
Functions
Status of the
Operation
headset
Volume up
Playing music
Short press “+”button
Volume
Playing music
Short press “―”button
down
Last song
Playing music
Long press “+”button
Next song
Playing music
Long press “―”button
Pause
Playing music
Short press MFB once
play
Pausing
Short press MFB once
Notes:
 When playing music on some mobile phones, the music will be
transmitted to the mobile phone’s speaker instead of the headset. You
have to select “transmit the sound via Bluetooth” in the settings menu
and then choose “BTH023” as speaker device. The music will be
transmitted to the headset. Please refer to your mobile phone’s user’s
manual for further information.
 When the volume is adjusted to max or min., you will hear one prompt
tone.
 If you want to remote control last/next song, pause/play, it needs your
Bluetooth mobile phone or Bluetooth transmitter paired with the headset
to support AVRCP profile, please refer to the user’s manual of your
mobile phone or Bluetooth transmitter for further information.
6. LED indicator
1) Charging
LED indicator
Red LED on
Red LED off
2) Pairing with Bluetooth device
LED indicator
Red and blue LED flashes
alternately
Blue LED flashes once every 2
seconds
Status of headset
Charging
Finish charging
Status of headset
Pairing mode
Not connect device
Blue LED flashes twice every 4
seconds
Blue LED flashes continuously
Blue LED flashes once quickly
every 2 seconds
Red LED flashes instead of blue
LED
Connect with device
Calling/incoming call
During a call
Low battery
7. Indication tone
Indication tone
Continuous two prompt tone
every 10 seconds
Five “dong” warning tone every 5
minutes
Status of the headset
Conversation
mode
microphone mute
Low battery
and
8. Factory Reset
In the status of charging, long press volume up “+” button about 4 seconds
and release it until the red and blue LED flashes simultaneously, you will
hear 4 “dong” tone.
Remarks:
After factory reset, the paired list of headset will be deleted. After turn it on
again, the headset will enter pairing mode automatically, and you need to
re-pair and connect with Bluetooth devices.
 Care and maintenance
Read the following recommendations carefully before using BTH023.
Following these you will be able to enjoy this product for many years.
 Keep it dry and don’t put it in the dump place to avoid the product’s
internal circuit being affected.
 Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices, destroy the
battery or distort certain plastic parts.
 Don’t expose the product to cold areas. It may damage the internal circuit
board.
 Don’t try to disassemble the product as it may get damaged if you are not
professional.
10




Don’t let it fall down onto the floor or other hard surfaces. The internal
circuit might get damaged.
Don’t use intensive chemical products or detergent to clean the product.
Don’t scratch the surface with sharp things.
Don’t use this product during strenuous exercise. It may damage the
product if the sweat into product.
In case the product does’t function properly, send it to the store you bought
it. The staff will help you to solve the problem
 FAQs
1. What does it mean when red LED flashes instead of blue LED?
Battery is low power, need to be recharged.
2. Why is the red LED off when charging?
a) Please make sure the charging device connect with headset Well;
b) You did’t use the headset for a long time, the battery may dry up. At this
time, you have to charge the battery for 30 minutes, and then the red
LED will be ON.
3. How far is the effective rang between the headset and mobile phone?
According to the Bluetooth standard, the max available range of Class II
headset is 10 meters. It varies under different environment.
4. Why my mobile phone can not search and find the headset?
The mobile phone will not find the headset if headset and mobile phone are
not under the pairing mode. Make sure the headset is under the pairing mode
and in the effective working range, and then the headset can be paired and
connected.
5.
a)
b)
c)
d)
Why the headset can not hear the voice?
Make sure the headset has been switched on;
Make sure the volume is not too low or muted;
Make sure the headset connects with the mobile phone correctly;
Make sure the distance between the headset and the cell phone is in the
available Bluetooth range.
11
6. Why the headset can not hear voice clearly in conversation?
a) Make sure the mobile phone is in the strong signal area;
b) Make sure the headset is in the available range of this product.
7. Why the headset can’t control pause, play, last song and next song
when playing music?
This function needs your Bluetooth device supports AVRCP (Audio/Video
Remote Control profile)
 Specifications
Bluetooth version
Bluetooth profiles
Bluetooth Antenna(gain)
Bluetooth Chip
Frequency Range
Modulation Type
Operating distance
Headset music time
Headset talk time
Headset standby time
Charging input
Headset charging time
Dimension
Weight
Battery capacity
Bluetooth V4.0
Headset, Hands free, A2DP, AVRCP
Ceramic Antenna (0dBi)
8645
2402-2480MHz
FHSS: (GFSK (1Mbps), ∏/4-DQPSK
(EDR
2Mbps),
8-DPSK
(EDR
3Mbps),GFSK
10meters
Up to 4 hours
Up to 4.5 hours
Approx 150 hours
DC5.0V
60mA
About 2 hours
14.5*35*32.6mm
Approx 13.2g
80mAH
FCC Statement:
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
3. This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment.
4. Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the
equipment.
5. Note:: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2012:12:20 16:59:48+08:00
Modify Date                     : 2012:12:20 16:59:48+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - BTH023 User's Manual.doc
Creator                         : Administrator
Document ID                     : uuid:a5321bf4-631e-4658-a2d8-08fbb74e04ea
Instance ID                     : uuid:0d9406e7-ee47-4070-9bb8-85aa62887bd8
Page Count                      : 15

EXIF Metadata provided by EXIF.tools