Zhongshan K mate General Electronics BTH070 Bluetooth Stereo Headset User Manual BTH033

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Stereo Headset BTH033

User Manual

BTH070NBluetooth stereo headsetUser’s manual
ContentsBrief introduction…………...…………………………..…....1Before use……………………………………………………..11. Overview…………………………………………………...……12. Charging for headset..……………………………………………2Getting started……..…………………………………………31. Turning on/off the headset…………....……………………......32. Wearing the headset.......................................................................33. Pairing/Connecting…….…….............................……………..….51) Pairing headset with Bluetooth cell phone via Bluetooth……..….52)Pairing headset with Bluetooth transmitter via Bluetooth..............63) Pairing headset with Bluetooth cell phone via NFC......................74) Pairing headset with multi devices via Bluetooth ….............…....84.Battery display...........................................................................................85.5. Making a call with the headset……………………………...….96. Playing music…………………………………………….…...117. LED indicator………………………………………………....128. Factory Reset………………………………………………..….12Care and maintenance……………………………..………..12FAQs……………………………………...…………………..13Specification……………………………...………………..…13
Welcome to use this Bluetooth stereo headset, BTH070N. Please read thisuser’s manual carefully before use.Brief introductionBTH070N is a comfortable and fashion music Bluetooth headset. Nicenecklace design as well as magnet on main body and earbuds are well foreasy carrying or wearing. BTH070N can be used on various environmentsbecause it have passed IPX4-rated sweat-proof. The headset will vibratewhen receivers an incoming call for built-in vibrator so all calling wont bemissing. You can use it to enjoy wireless music and make a call at the sametime.Before use1. Overview1
2. Charging for headsetThe headset comes with a built-in rechargeable battery, prior to using it, it isrecommended to charge the battery fully for the first time.When the headset is low power, the headset emits “Battery low” every 5minutes and the red LED flashes. Please recharge the battery of the headset.The way of charging as following:Using USB cable1. Turn on the cover of charging jack, and plug the USB charging cable2. Plug another side of cable to the USB port of PCThe headset emits”ChargingRed light on: ChargingRed light off: Finish charging3. It will takes about 1.5 hours to finish chargingRemarks:1) The battery is recyclable.2) Batteries (battery pack or batteries installed)shall not be exposed to excessive heat place,such as sunshine, fire or the like.21Right ear plug6: MFB button2Left ear plug7NFC zone3Magnet button8USB charging jack4:volume up/previous song9Microphone /LED5: volume down/next song
Getting started1. Turning on/off the headsetFunctionsOperationPrompt toneTurning onPress and hold about 2.5seconds until blue LED flashesPower onTurning offPress and hold about 2seconds until red LED flashesPower offRemark: In order to save power, the headset will turn off automatically ifno devices can be connected after long time.2. Wearing the headsetA.Choose the suitable size earbud according to your ears.B .Put the headset on your neck and absorb the magnet button,then wear theRight/Left ear plugs.As below picture shows:According to above methods adsorption the two magnetic buckle together ,if feeling not strong enough, can as following way to dislocation twomagnetic buckle , adsorption force will be stronger, and wearing also morestable.3
C. Separate magnet button gently if you want to take down the headset fromyour neck.D. The cable length can be adjustableStep 1:Like picture 1 show, one hand hold the magnet button,the otherhand push cable to the magnet button;Step 2:Like picture 2 show,one hand hold the magnet button,the other handpull cable to increase cable length between magnet button,then the necklacelength will shorten.Step 3 ：Like picture 3 show,one hand hold the magnet button,the otherhand pull cable to decrease cable length between magnet button,then thenecklace length will extended.Note:Do not too rude in the process or maybe damage the cable.Step 1 Step 2 Step 34
E.Right/Left ear plugs can be fixed on the main body via the magnetfunction when no need use of headset, at the same time it becomes a niceand fashion necklace for you.The headset also can be connected as below method:3. Pairing/Connecting1) Pairing headset with Bluetooth cell phone via BluetoothPrior to using the headset for the first time, you have to pair it with aBluetooth-enabled cell phone. The pairing procedures are subject to5
different models of cell phones. Please refer to your cell phone user’smanual for further information.The general pairing procedures are as follows:1) Keep your headset turned off and within 1 meter of phone ;2) Press and hold about 4 seconds until the red and blue LED flashalternately, and the headset emits”Pairing”.3) Activate your cell phone’s Bluetooth function and search for Bluetoothdevices within range, select “BTH070N” from the list of devices shown(enter password “0000 ” if the headset prompt);4) After successful connecting, blue LED of headset flashes twice every 4seconds and emits”Your headset is connected”.Remarks:Pairing mode will last 2 minutes, the headset will back to standby modeif the pairing failure.Every time the headset is turned on, it will connect to last connecteddevice automatically.When the headset is on standby mode short press any button it willconnect with the last connected devices.The headset will disconnected if out of range with devices.It willre-connecting automatically if back to effective range within 5minutes,after 5 minutes it will be on standby mode and turn offautomatically if beyond 10 minutes.2) Pairing headset with Bluetooth transmitter via BluetoothYou can connect the headset to a Bluetooth transmitter to enjoy musicwirelessly. Hereby take BTT005 (Bluetooth transmitter, not included inaccessories) for example. The pairing steps are as follows:1) Keep your headset and transmitter within1 meter when pairing;2) Make the headset enter pairing mode3) Turn on the Bluetooth transmitter andmake it enter paring mode. It willsearch for Bluetooth devices automaticallyand send a pairing request;4) After successful pairing and connecting,5blue LED of the headset flashes twice every 4 seconds and prompt oneshort‘DU”.6
Remarks:The pairing password of BTH070N is “0000”. So, the headset can onlypair with a Bluetooth transmitter whose pairing password is “0000”.If pairing still fails after several tries, please refer to the Bluetoothtransmitter’s user’s manual for further information.3) Pairing headset with a Bluetooth cell phone via NFCBTH070N support NFC technology, it can quickly connect with Bluetoothcell phone via NFC.Please activate the Bluetooth and NFC function of cellphone,then keep cellphone and headset of NFC zone in touch,BTH070Nwill pairing and connecting with cellphone automatically.5Remarks:The screen of cellphone must be in unlocked mode during pairing viaNFCIn the first time of pairing,please not take the cellphone away tillBTH070N enter pairing mode,or it may cause fail.The NFC chip of cell phone and headset must be in 1 centimeter duringpairing,or it may cause fail.It can connected via NFC if headset turned on but not connected withdevices; and it can disconnect via NFC if headset already connected withdevices.7
3) Pairing headset with multi devices via BluetoothThe headset can connect with two Bluetooth cell phones at the same time.The general pairing procedures are as follows:1) Pairing the headset with device one2) Turn on the headset and make it enter pairing mode again, and pairing itwith device two3) Operate device one to connect with headset. The headset has alreadyconnected with two devices in this momentRemarks:Turn off: In pairing mode or standby mode(not connected),press andbutton simultaneous about 3 seconds and release it till hear “Disablemultipoint”Turn on: In pairing mode or standby mode,press and buttonsimultaneous about 3 seconds and release it till hear “Enable multipoint”To improve the stabilization of headset, we suggest you turn off themulti-pair function when you only connect with one cell phone.If headset already enable multipoint ,it will connect the last connecteddevice automatically when power on,and need manual connect thesecond devices.4. Battery displayWhen the headset connected with IOS device, it will display the currentbattery of headset on the device. When the headset is in low battery, powersymbol show red, it emits you to charge for your headsetFull charge Low battery8
5. Making a call with the headset1) Basic operationFunctionsStatus ofheadsetOperationPrompt toneCalling ringCallingMain bodyvibrate withringingCancel a callCallingShort pressonceCallterminatedAnswer a callIncoming callringingShort pressonceAnswerReject a callIncoming callringingLong pressabout 1 secondsRejectEnd a callDuring a callShort pressonceCallterminatedVolume upDuring a callShort pressbuttonVolume downDuring a callShort pressbuttonTransferconversationto mobilephoneDuring a callLong pressabout 1 secondsTransferaudioTransferconversationto headsetDuring a callLong pressabout 1 secondsTransferaudioMicrophonemuteDuring a callLong pressabout 1 secondsMute on9
Cancel muteDuring a call(microphonemute)Long pressabout 1 secondsMute offVoice dialStandby mode(connecteddevice)Short pressand buttonsimultaneouslyVoice dialRedial thelast numberStandby mode(connecteddevice)Double clickbuttonLast numberredialWarning: Excessive pressure from earphones and headphones cancause hearing loss.Note:When the volume is adjusted to max or min, you will hear one prompttone.When the headset under microphone mute mode, you will hear two“DUDU” tone every 10 seconds.When pressing the answer button on some mobile phones, the call will betransferred to the mobile phone. You can switch the call to the headset byusing the conversation switch button or through operating on the mobilephone. Please refer to your mobile phone user manual for furtherinformation.2) Three-ways call operationFunctionsStatus of headsetsOperationAnswer new call andend current callThere are secondincoming callShort press onceAnswer new call andretain current callThere are secondincoming callDouble clickbuttonSwitch callsKeep conversationDouble clickbuttonEnd current call andswitch retain callKeep conversationShort press once10
3) Connect with two cell phonesFunctionsStatus of headsetOperationEnd phone call #1and answer phonecall #2During phone call #1,phone 2 has incomingcallShort press onceRetain phone call #1and answer phonecall #2During phone call #1,phone 2 has incomingcallDouble clickbuttonSwitch callDuring call, one ofphone call is retainedDouble clickbuttonEnd current call,back to retain phonecallDuring call, one ofphone call is retainedShort press once5. Playing musicFunctionsStatus of theheadsetOperationVolume upPlaying musicShort press buttonVolumedownPlaying musicShort press buttonLast songPlaying musicLong press buttonNext songPlaying musicLong press buttonPausePlaying musicShort press onceplayPausingShort press onceNotes:When the volume is adjusted to max , you will hear “Maximumvolume”;and one short “DU” to minimum volume.If you want to remote control last/next song, pause/play, it needs yourBluetooth mobile phone or Bluetooth transmitter paired with the headsetto support AVRCP profile, please refer to the user’s manual of yourmobile phone or Bluetooth transmitter for further information.11
6. LED indicatorLED indicatorStatus of headsetRed and blue LED flashesalternatelyPairing modeBlue LED flashes once every 2secondsNot connected to deviceBlue LED flashes twice every 4secondsConnected to deviceRed LED flashes instead of blueLEDLow battery7. Factory ResetIn the status of charging, long press button about 3 seconds and releaseit until the red and blue LED flashes simultaneously, you will hear “resetpaired”.Remarks:After factory reset, the paired list of headset will be deleted. After turn it onagain, the headset will enter pairing mode automatically, and you need tore-pair and connect with Bluetooth devices.Care and maintenanceRead the following recommendations carefully before using BTH070N.Following these you will be able to enjoy this product for many years.Please note that the cord management clips are optional accessory forbetter wearing.Keep it dry and don’t put it in the dump place to avoid the product’sinternal circuit being affected.Keep the product away from direct sunlight or hot places. Hightemperatures will shorten the life of electronic devices, destroy thebattery or distort certain plastic parts.Don’t expose the product to cold areas. It may damage the internal circuitboard.Don’t try to disassemble the product as it may get damaged if you are notprofessional.Don’t let it fall down onto the floor or other hard surfaces. The internalcircuit might get damaged.Don’t use intensive chemical products or detergent to clean the product.12
Don’t scratch the surface with sharp things.Don’t use this product during strenuous exercise. It may get damaged bysweat.In case the product doesn’t function properly, send it to the store you boughtit. The staff will help you to solve the problemFAQs1.What does it mean when red LED flashes instead of blue LED?Battery is low power, need to be recharged.2.Why is the red LED off when charging?a) Please make sure the charging device connect with headset well;b) The battery may dry up. Please charge the battery for 30 minutes, andthen the red LED will be ON.3. Why can’t I hear the sound on the headset?a) Make sure the headset has been switched on;b) Make sure the volume is not too low or muted;c) Make sure the headset connects with the mobile phone correctly;d) Make sure the distance between the headset and the cell phone is in theavailable Bluetooth range.4. Why can’t I hear the sound clearly on the headset?a) Make sure the mobile phone is in the strong signal area;b) Make sure the headset is in the available range of this product.5. Why the pause/play, last/next song not function when playing music?Make sure your Bluetooth device supports AVRCP (Audio/Video RemoteControl profile)SpecificationsBluetooth versionBluetooth V4.1Bluetooth profilesHFP,HSP, A2DP, AVRCPOperating distance10metersHeadset music timeUp to 7 hoursHeadset talk timeUp to 8 hoursStandby timeAbout 220 hoursHeadset charging timeAbout 1.5 hoursCharging inputDC 5.0V 500mAWeightAbout 27 g13
NOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ormore of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.-Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operatethe equipment. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, includinginterference that may cause undesired operation.

Navigation menu