Zhongshan K mate General Electronics BTS002 Mini Bluetooth Stereo Speaker User Manual 5 BTS002 User s manual 0912

Zhongshan K-mate General Electronics Co., Ltd Mini Bluetooth Stereo Speaker 5 BTS002 User s manual 0912

UserManual.wiki >

Zhongshan K mate General Electronics >

BTS002 User Manual

Users Manual

BTS002 Mini Bluetooth stereo speaker User’s manual  Brief introduction…………………………………………2 1. Bluetooth wireless communication technology………………….….2 2. About the speaker………………………………………………….….3  Getting started…………………………………………….3 1. Overview………………………………………………………….…….4 2. Charging the battery of the speaker…………………………….…...4  Using the speaker………………………………………...4 1. Turning on/off the speaker……………………………………………5 2. Pairing the speaker with Bluetooth devices…………………….......5 How to enter pairing mode………………………………………….…5 Pairing the speaker with Bluetooth mobile phone…………………..5 Pairing the speaker with Bluetooth transmitter……………………...6 3. Making a call with the speaker………………………………………..6 4. Music playback…………………………………………………………8 5. Re-connecting with a Bluetooth device………………………………8 6. Auto-off…………………………………………………………………..9 7. Using the speaker with an external device…………………………..9 8. Connecting with a non Bluetooth device……………………………10 9. LED indicator…………………………………………………………..11 10. Indication tone………………………………………………………….11  Care and maintenance……………………………………12  FAQs…………………………………………………………12  Specifications……………………………………………...13

4) Every time the speaker is tured on, it will connect to the last connected device automatically. Remark: Even though the paired device and the speaker support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices.  Getting started 1. Overview

2. Charging the battery of the speaker The speaker comes with a built-in rechargeable battery, prior to using it, it is recommendable to charge the battery fully for the first time. Connect the USB cable to an computer USB port and the USB cable plug to the charging socket of the speaker. The LED will be red while charging. It takes about 2.5 hours to charge the battery fully. When charging has completed, the LED will be off. When the speaker is on and the battery becomes low, the LED flashes red for twice and the speaker emits three “Dong” tones every 10 seconds. Please recharge the battery fully as described above. Remarks: 1) The battery will dry up if you don’t use the speaker for a long time. If this happens you have to charge the battery of the speaker for about 30 minutes before the LED indicator will be on. 2) Please don’t attempt to take out the battery from the speaker, as this might damage it.  Using the speaker 1. Turning on/off the speaker Functions Operations LED indicator Indication tone Turning on the speaker Press and hold button for about 3 5 seconds untill the LED flashes blue The LED flashes blue A string of tones Turning off the speaker Press and hold button for about 2 3 seconds until the LED flashes red The LED flashes red A string of tones

2. Pairing the speaker with Bluetooth devices How to enter pairing mode Function Status of the speaker Operation LED incicator Entering pairing mode Turned on Press and hold button for 7 8 seconds The LED flashes red and blue alternately Remarks: 1) If the pairing can not be completed within 3 minutes, the speaker will exit pairing mode. 2) You will hear two “Dong” tones while the speaker enters pairing mode. 3) The speaker will return to pairing mode automatically if it disconnects with Bluetooth device. Pairing the speaker with Bluetooth mobile phone Prior to using the speaker for the first time, you have to pair it with a Bluetooth-enabled mobile phone. The pairing procedure is subjuct to different models of mobile phones. Please refer to your mobile phone user’s manual for details. The general pairing procedure are as follows: 1) Place the speaker and Bluetooth mobile phone where they are easily viewable by no more than 1 meter apart; 2) Make sure the speaker is off, otherwise switch it off first; 3) Enter the speaker’s pairing mode (please refer to “How to enter pairing mode); 4) Activate your mobile phone’s Bluetooth function and set your mobile phone to search for Bluetooth devices. After the search is completed, select “BTS002” from the Bluetooth device list; 5) According to the indication, enter password or PIN No:”0000” and press ” Yes” or “confirm”; 6) Go back to your mobile phone’s main menu. For certain mobile phone models, a speaker icon will be shown on the screen. You should now be able to listen to music and make calls using the speaker. Remarks:  If the pairing is failed, please turn off the speaker first and then re-pair according to steps 1 6 mentioned above.  After pairing is successful, the speaker and the mobile phone will remember each other, the speaker will not need to re-pair next time. The speaker can remember 8 paired devices. When the number of paired.  Every time the speaker is turned on, it will connect to the last connected device automatically. If you want to pair it with other devices, please turn

off the Bluetooth function of the last connected devices first and pair the speaker with the new device according to steps 1 6 mentioned above. Pairing the speaker with Bluetooth transmitter You can connect the speaker to a Bluetooth transmitter to enjoy music wirelessly. Hereby taken BTT001 iPod Bluetooth transmitter for example. The pairing procedure are as follows: 1) Place the speaker and Bluetooth transmitter where they are easily viewable by no more than 1 meter apart; 2) Enter the speaker’s pairing mode (Please refer to “How to enter pairing mode); 3) Turn on the Bluetooth transmitter. It will search for Bluetooth devices automatically and send a pairing request; 4) When the speaker requests to enter a PIN No., the transmitter will response “0000” automatically; 5) After successful pairing and connecting, the LED will flash blue for twice every 4 seconds. Remarks:  The pairing password of BTS002 is “0000”. So, BTS002 can only pair with Bluetooth transmitters whose pairing password is “0000”, too.  If pairing still fails after several tries, refer to the Bluetooth transmitter’s user’s manual for further information. 3. Making a call with the speaker Functions Status of the speaker Operations Basic conversation functions Answer a call Incoming ring Short press button once Reject a cal Incoming ring Press and hold button for about 2 seconds untill you hear indication tone Cancel calling Calling Short press button once End a call During a call Short press button once

Adjust the volume During a call Press button to adjust the volume Microphone mute During a call Short press button twice quickly Cancel mute Microphone mute Short press button twice quickly Call transfer (speaker to mobile phone) During a call (speaker) Press and hold button for about 2 seconds untill you hear indication tone Call transfer (mobile phone to speaker) During a callmobile phone Press and hold button for about 2 seconds untill you hear indication tone Redial last nomber Standby mode and connected Press and hold button once Voice dial Standby mode and connected Short press button twice quickly Three-way calling function Answer a new incoming call and end current call There is a new incoming call Short press button Reject a new incoming call and continue current call There is a new incoming call Press and hold button Answer a new incoming call and keep current call There is a new incoming call Short press button Switch between two calls During a call (Keeping a call) Short press button End current call and switch to the keeping call During a call (Keeping a call) Short press button Remarks: 1) Not all mobile phones support all functions listed above. Please refer to your mobile phone’s user’s manual for further information. 2) When pressing the answer button on some mobile phones, the call will be sent to the mobile phone. You have to switch the call to the speaker manually then. Please refer to your mobile phone’s user’s manual for further information.

4. Music playback After connecting the speaker to a Bluetooth mobile phone or Bluetooth transmitter supporting A2DP, you can enjoy music with the speaker. If you want to remote control previous/next track, pause/play, it needs the Bluetooth mobile phone or Bluetooth transmitter paird with the speaker to support AVRCP. Functions Status of the speaker Operation Adjust the volume Playing music Press button to adjust the volume Previous track Playing music Short press button once Next track Playing music Short press button once Pause Playing music Short press button once Play Pausing Short press button once Remark:When playing music on some mobile phones, the music will be transmitted to the mobile phone’s speaker instead to the speaker. You have to select to transmit the sound via Bluetooth in the settings menu then and choose “BTS002” as speaker device. The music will be transmitted to the speaker then. Please refer to the your mobile phone’s user manual for further information. 5. Re-connecting with a Bluetooth device 1) Automatic connecting Every time the speaker is turned on, it will connect to the last connected device automatically. 2) Connecting manually When the speaker is in standby mode, press MFB button once to connect the speaker to the last connected device. Remarks:  Short press button once, the speaker will connect to last connected HFP device automatically. Short press once, the speaker will connect to last connected A2DP device.  Before connecting to a Bluetooth device, please switch on the Bluetooth device’s Bluetooth function. On some Bluetooth devices, take some Nokia mobile phones for example, you have to allow automatic connecting in the mobile phone’s settings. Please refer to the mobile phone’s manual for further information.

6. Auto-off The speaker will turn off automatically if no devices can be connected after 5 minutes in order to save power. Remark: When the speaker disconnects with a Bluetooth device, it will return to pairing mode for 3 minutes then return to standby mode for 5 minutes, at last it will turn off automatically. 7. Using the speaker with an external device You can listen to music through your car audio system or home audio system from your stereo speaker. Step 1: Turn LINE IN/OUT button to “OUT” as the following picture shows: Step 2: Use a Line-out cable to connect the LINE port to your car audio system or home home system as the following picture shows: Please read your car audio system’s user manual or home audio system’s user manual to understand how to activate and use the stereo Line in function. Turn LINE IN/OUT button to “OUT”

8. Connecting with a non Bluetooth device You can listen to music through the stereo speaker from an external device that does not even support the Bluetooth function. Step 1: Turn LINE IN/OUT button to “IN” as the following picture shows: Step 2: Use a Line-in cable to connect the Line-out port of the external music player to the LINE port of the speaker as the following picture shows: Step 3: Play music from your music player. Remarks: 1) When using Line-in function, the speaker LED will be red, and the speaker will not turn off automatically. 2) When using Line-in function, the speaker will disconnect with Bluetooth device. When unplug the Line-in cable, the speaker will connect to the last connected device automatically. Turn LINE IN/OUT button to “IN”

9. LED indicator While the speaker is charging LED indicator Status of the speaker The LED is red Charging in progress The LED is off Finish charging While the speaker is not charging LED indicator Status of the speaker The LED flashes red and blue alternately Pairing mode The LED flashes blue for twice every 2 seconds Not connected The LED flashes blue for twice every 5 seconds Set up HFP connection The LED flashes blue for twice every 5 seconds Set up A2DP connection The LED flashes blue for 3 times every 2 seconds Incoming call/calling The LED flashes blue for once every 3 seconds During a call The LED flsshes red for twice every 10 seconds Low power The LED is red Plug Line-in cable 10. Indication tone Indication tone Status of the speaker Emits 2 DU tones every 5seconds Microphone mute Emits 3 Dong tones every 10 seconds Low power

 Care and maintenance Read the following recommendations before using the speaker. Following these you will be able to enjoy our product for many years.  Do not expose the speaker to liquid, moisture or humidity to avoid the product’s internal circuit being affected.  Don’t use abrasive cleaning solvents to clean the speaker.  Do not expose the speaker to extremely high or low temperatures as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts  Don’t dispose of the speaker in a fire as it will result in an explosion  Don’t expose the speaker to contact with sharp objects as this will cause scratches and damage.  Don’t let it fall down onto the floor. The internal circuit might get damaged.  Don’t attempt to disassemble the product as it may get damaged if you are not professional. In case the speaker doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem.  FAQs 1. What to do when my mobile phone can not search the speaker? a) Make sure the speaker has entered pairing mode; b) Ensure the speaker is in the effective working range. 2. What to do when the effect of conversation is not satisfactory? a) Make sure the speaker is in strong-signal area; b) Ensure the speaker is in the effective working range. 3. How far is the effective range between the speaker and a Bluetooth mobile phone? According to the Bluetooth standard, the max. controllable range of Class2 Bluetooth product is 10 meters. It varies with different environments and paired cell phones. 4. Why is there no sound when making a call with the speaker? a) Make sure the speaker has connected with the mobile phone; b) Ensure the volume of the speaker has been adjusted to proper position.