Zhongshan K mate General Electronics BTS028 Bluetooth Speaker User Manual BTS028 User s Manual

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Speaker BTS028 User s Manual

UserManual.wiki >

Zhongshan K mate General Electronics >

BTS028 User Manual

Manual.pdf

BTS028 Bluetooth stereo speaker User’s manual

Contents  Brief introduction…………...…………………………..…....1 1. Bluetooth wireless communication technology……………….…....1 2. About BTS028…………………………………………………...1  Before use……………………………………………………..2 1. Overview…………………………………………………...……2 2. Charging for speaker.………………….…………………………3  Getting started……..…………………………………………3 1. Turning on/off the speaker..…………....……………………......3 2. Pairing speaker with Bluetooth devices…….…………………..….3 1) How to enter pairing mode………………….………………….3 2) Pairing speaker with Bluetooth cell phone…………………..….4 3) Pairing speaker with Bluetooth transmitter………….………....5 3. Reconnecting the speaker with devices…………………………....5 4. Making a call with the speaker……………...…………………….6 5. Playing music……………………………………………….…...8 6. LED indicator…………………………………………………..8 7. Indication tone……………………………………………….….9 8. Factory Reset……………………………………………..…..….9  Care and maintenance……………………………..…..……..9  FAQs……………………………………...…………………..10  Specification……………………………...………………..…11

4) Every time the speaker is turned on, it will connect to last connected device automatically. Note: In order to complete above function, the Bluetooth profiles of paired device must be same as the speaker. And even though the paired device and the speaker support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices.  Before use 1. Overview 1 Built-in microphone 7 Volume up 2 LED indicator 8 ► button: next song/fast forward 3 Left speaker 9 Volume down 4 Right speaker 10 ON/OFF button: power switch 5 ◄button: previous song/ fast rewind 11 Charging jack 6 button: Multi-functions button(MFB) 12 Aux-in jack 2

2. Charging for speaker The speaker comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the speaker is low power, the speaker emits a string of warning tones every 1 minutes and the red LED flashes. Please recharge the battery of the speaker. The way of charging as following: Using USB cable 1. Plug the USB cable into the USB port of PC 2. Plug another side of cable into the charging jack of speaker Red light on: Charging Red light off: Finish charging 3. It will takes about 3 hours to finfish charging Remarks: 1) The battery is recyclable. 2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like.  Getting started 1. Turning on/off the speaker Functions Operation LED indicator Prompt tone Turning on Make the power switch to ON Blue LED on one second 4 raise tones Turning off Make the power switch to OFF Red LED on one second 4 fall tones 2. Pairing the speaker with Bluetooth devices 1) How to enter pairing mode Functions Operation LED indicator Entering pairing mode Ensure the speaker is on, otherwise please turn it on first. And then long press button about 4~6 seconds until red and blue LED flash alternately Red and blue LED flash alternately 3

Remark:  Pairing mode will last 2 minutes. If no devices can be connected after 2 minutes, it will return to standby mode automatically.  If the speaker has already connected with a device and it is not playing music, long press button to enter pairing mode.  You will hear 2 raise tones when the speaker enter pairing mode. 2) Pairing speaker with Bluetooth cell phone Prior to using the speaker for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows: 1) Keep your speaker and phone within 1 meter when pairing; 2) Make the speaker enter pairing mode (please refer to “How to enter pairing mode); 3) Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select “BTS028” from the list of devices shown; 4) According to the indication, enter password or PIN No: “0000”. (If the mobile phone supports Bluetooth V2.1, password is not required.). If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models); 5) After successful paired, choose and connect “BTS028” from the list of devices shown on cell phone; 6) After successful connecting, blue LED of speaker will flashes twice every 4 seconds Remarks:  If pairing is failed, please turn off the speaker first and then re-pair according to steps 1～6 mentioned above.  After pairing is successful, the speaker and the cell phone will remember each other, they will no need to re-pair next time. The speaker can remember 8 paired devices, when the number of paired devices exceeds 8, the first one will be replaced.  Every time the speaker is turned on, it will connect to last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the speaker with the new device according to steps 1～6 mentioned above. 4

3) Pairing speaker with Bluetooth transmitter You can connect the speaker to a Bluetooth transmitter to enjoy music wirelessly. Hereby take BTT005 (Bluetooth transmitter, not included in accessories) for example. The pairing steps are as follows: 1) Keep your speaker and transmitter within 1 meter when pairing; 2) Make the speaker enter pairing mode (Please refer to “How to enter pairing mode); 3) Turn on the Bluetooth transmitter and make it enter pairing mode. It will search for Bluetooth devices automatically and send a pairing request; 4) When the speaker requests to enter a PIN No., the transmitter will response “0000” automatically; 5) After successful pairing and connecting, blue LED of the speaker flashes twice every 4 seconds. Remarks:  The pairing password of the speaker is “0000”. So, the speaker can only pair with a Bluetooth transmitter whose pairing password is “0000”.  If pairing still fails after several tries, please refer to the Bluetooth transmitter’s user’s manual for further information. 3. Reconnecting the speaker with devices 1) Automatic connecting Every time the speaker is turned on, it will connect to last connected device automatically. 2) Manual connecting When the speaker is in standby mode and doesn’t connect to a device, short press button once, it will connect to last connected device. Remarks:  Before connecting to a Bluetooth device, please turn on the Bluetooth function of Bluetooth device.  On some Bluetooth devices, take some Nokia cell phones for example, you have to allow automatic connecting in the cell phone’s settings. Please refer to your cell phone’s manual for further information. 5

4. Making a call with the speaker 1) Basic operation Functions Status of speaker Operation Prompt tone Cancel call Calling Short press button once One short tone Answer call Incoming call ringing Short press button once Two raise prompt tone Reject a call Incoming call ringing Long press about 2 seconds and release it until listen a tone Two fall prompt tone End a call During a call Short press button once One short tone Volume up During a call Short or long press + button Volume down During a call Short or long press — button Transfer conversation to mobile phone During a call Long press button about 2 seconds One short tone Transfer conversation to speaker During a call Long press button about 2 seconds One short tone Microphone mute During a call Double click button Two fall tone Cancel mute During a call (microphone mute) Double click button Two raise tone 6

Voice dial Standby mode (connected device) Long press button about 2 ~3 seconds One short tone Redial the last number Standby mode (connected device) Double click button One short tone 2) Three-ways call operation Functions Status of speakers Operation Answer new call and end current call There are second incoming call Short press button once Answer new call and retain current call There are second incoming call Double click button Switch calls Keep conversation Double click button End current call and switch retain call Keep conversation Short press button once Warning: Excessive pressure from speaker can cause hearing loss. Note:  Not all the mobile phones support all the functions listed above. Please refer to your mobile phone user’s manual.  Different function and prompt tone according to different mobile phone.  When the volume is adjusted to max or min, you will hear one prompt tone.  When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to the speaker by using the conversation switch button or through operating on the mobile phone. Please refer to your mobile phone user manual for further information. 7

2) Pairing with Bluetooth device LED indicator Status of speaker Red and blue LED flashes alternately Pairing mode Blue LED flashes once every 2 seconds Not connect with device Blue LED flashes twice every 4 seconds Connect with device Blue LED flashes continuously Calling/incoming call Blue LED flashes once every 1 seconds During a call Red LED flashes instead of blue LED Low battery 7. Indication tone Indication tone Status of the speaker Continuous two “du du” tone every 10 seconds Conversation mode and microphone mute A string of warning tone every 1 minutes Low battery 8. Factory Reset In the status of standby mode, not connect with device, long press and volume up “+” button simultaneously about 5 seconds and release it until the red and blue LED flashes simultaneously, you will hear two “du du” tone. Remarks: After factory reset, the paired list of speaker will be deleted. After turn it on again, the speaker will enter pairing mode automatically, and you need to re-pair and connect with Bluetooth devices.  Care and maintenance Read the following recommendations carefully before using BTS028. Following these you will be able to enjoy this product for many years.  Keep it dry and don’t put it in the dump place to avoid the product’s internal circuit being affected.  Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. 9

 Don’t expose the product to cold areas. It may damage the internal circuit board.  Don’t try to disassemble the product as it may get damaged if you are not professional.  Don’t let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged.  Don’t use intensive chemical products or detergent to clean the product.  Don’t scratch the surface with sharp things. In case the product doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem  FAQs 1. What does it mean when red LED flashes instead of blue LED? Battery is low power, need to be recharged. 2. Why is the red LED off when charging? a) Please make sure the charging device connect with speaker well; b) You didn’t use the speaker for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be ON. 3. How far is the effective rang between the speaker and mobile phone? According to the Bluetooth standard, the max available range of Class II speaker is 10 meters. It varies under different environment. 4. Why my mobile phone can not search and find the speaker? The mobile phone will not find the speaker if speaker and mobile phone are not under the pairing mode. Make sure the speaker is under the pairing mode and in the effective working range, and then the speaker can be paired and connected. 5. Why the speaker can not hear the voice? a) Make sure the speaker has been switched on; b) Make sure the volume is not too low or muted; c) Make sure the speaker connects with the mobile phone correctly; d) Make sure the distance between the speaker and the cell phone is in the available Bluetooth range. 10

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: _ Reorient or relocate the receiving antenna. _ Increase the separation between the equipment and receiver. _ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. _ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 11