Zhongshan K mate General Electronics BTT001 Bluetooth Transmitter for iPod User Manual BTT001

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Transmitter for iPod BTT001

Users Manual

BTT001 1 BTT001 Bluetooth Transmitter for iPod User Manual V2.0  Before using 1. About the BTT001 2. Overview  Start to use 1. Switching on/off the adaptor 2. Pairing with Bluetooth devices 3. Music remote control 4. Indicator LED  Care and maintenance  FAQs  Specification
BTT001 2 Welcome to use this stereo Bluetooth adaptor, BTT001. Before using it, please read this user manual carefully ■ Before using 1. About BTT001 BTT001 is a Bluetooth adaptor. for iPod. It supports the following Bluetooth profiles. Profiles Description A2DP (Advanced audio distribution) Stereo music play AVRCP(Audio/video remote control) Music remote control(control the function ofpause、play、last song and next song) As long as you plug the adaptor into the iPod, and pair with your stereo Bluetooth receiver(such as stereo Bluetooth headsets or Bluetooth speakers),you can enjoy music wirelessly. Additionally , you can remote control your iPod through operating the receiver if your Bluetooth receiver also supports AVRCP ,. Using it as soon as you plug it in, no need to charge. It is very convenient. 2. Overview 1 iPod dock connector——using it to connect with iPod 2 Indicator LED——status indication
BTT001 3 ■ Start to use 1、Switching on/off the adaptor Function Operation indicator light Turn on Connect the adaptor with iPod Indicator flashes quickly Turn off Take out the adaptor from iPod Indicator light is off Note：please operate your iPod if the adaptor dose not work. 2、Pairing with Bluetooth devices You can enjoy music wirelessly after pairing and connecting the adaptor with Bluetooth receiver,. Before pairing, please make sure your Bluetooth receiver supports A2DP profile. The steps are as follows: 1)、Keep the adaptor and your stereo Bluetooth receiver within 5 meters 2)、Turn on your Bluetooth receiver, and turn it to pairing mode. 3)、Connect the adaptor with iPod, make sure your iPod is on, the indicator light will flash quickly.. 4) 、The adaptor will search and pair with the Bluetooth receiver automatically.. 5)、After successful connecting the adaptor indicator LED will flash slower than before. At this time, play music in the iPod . Note： ● The adaptor can pair with stereo Bluetooth receivers which PIN Nos. are “0000”、“1234”、“7777”or“8888”. ●Connecting with the last paired device automatically when turn on the adaptor.So,.If you want to pair with other devices, please turn off the current receiver, and then start to pair with new device. 3、Music remote control You can remote control last song、next song、pause、revert to play through operating the Bluetooth receiver. This function needs your Bluetooth receiver to support AVRCP(audio/video remote control) profile. Please refer to your user manual of Bluetooth receiver for further information. 4、Indicator LED Indicator LED Status of adaptor Blue LED flashes quickly Pairing mode or disconnect with Bluetooth device Blue LED flashes every 2 second connected with Bluetooth device
BTT001 4 ■ Care and maintenance Before using the Bluetooth adaptor, please read the following recommendations ,It will help you to enjoy the product for many year. ● Keep dry and don’t put it in the wet place, in case of effecting the interior circuit of product. ●Don’t put the product under the sunlight or place in hot areas. High temperature will shorten the life of electronic device and distort certain plastic. ●Don’t expose the adaptor to extreme temperatures, which may damage the internal circuit board. ●Don’t try to take apart the product. It may damage the product if you are not professional ●Don’t fall off on the floor, or knock the hard substance, it may damage interior circuit. ●Don’t use intensify chemical or detergent to clean the product ● Don’t scrap the surface with sharp things ● If the product can’t work normally, please send it to the regularly asserted store, the staff will help you to solve problem warmly. ■ FAQs 1 Why can’t turn on the adaptor？ a) Please make sure the adaptor connect with iPod well。 b) Please operate iPod to make sure iPod is on. 2 Why the adaptor can’t be paired and connected？ a) Make sure Bluetooth receiver supports A2DP； b) Make sure Bluetooth receiver is placed within 5 meters； c Make sure Bluetooth receiver is in pairing mode. 3 Why no music from receiver？ a) Make sure adaptor connects with iPod well。 b) Please make sure iPod is playing music。
BTT001 5 ■ specification Bluetooth version Bluetooth V2.1 Bluetooth profiles A2DP, AVRCP Frequency range 2.402GHZ-2.4835GHz Effective range Up to 10m Dimension 43.5*15*6.6mm Weight 4.5g Rating DC 3.3V, 40mA Compatible iPods iPod Nano 2nd Gen, iPod Nano 3rd Gen, iPod Classic, iPod Touch, iPhone, 3G Phone， iPod Nano 4th Gen， iPod Touch 2nd Gen
BTT001 6 Note This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu