Zhongshan Senjia Electrical Appliances TS-1809 2.0 Sound System User Manual 1

Zhongshan Senjia Electrical Appliances Co., Ltd. 2.0 Sound System 1

User Manual

         Tiw  S-1phowith809ne/h Bl So/ipouetoundod  tootd BaDocth,ar fckinAuxfor ng x inn 
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators,heat registers,stoves,or other apparatus(including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. • Consult the dealer or an experienced radio/TV technician for help. Additional Warnings • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet. • Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur. • Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres choses de semblable. • Caution marking is located at the rear or bottom of the apparatus. Attention marquage est situé sur le paneau arrière ou inférieur de l’unité. • The marking information is located at the rear or bottom of apparatus. Le marquage est situé sur le paneau arrière ou inférieur de l’unité. WARNINGS AND PRECAUTIONS • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Avertissement: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. • CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. • WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface. • WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. • CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent. • WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.
• WAinste• WAor diprac• WA• AVMainIn ordiscLa pLa paccel’alimDo nDo nNo mNo mWARELECCOVPARTSERVPERSThe etriangprese(servaccom  ARNING: The read recycle orARNING: Lithiisposed of in ctices in your ARNING: ShocVIS: RISQUE Dns plug is userder to discononnected formprise du secteuprise du secteuessible pendamentation d’ennot mix old annot mix alkalinmezcle bateríamezcle bateríaRNING: TO REDCTRIC SHOCK,ER (OR BACK)TS INSIDE. REVICING TO QUSONNEL.     exclamation poigle is intended tence of importanvicing) instructiompanying the aremote contror dispose of aum batteries,  normal housearea. They shck hazard - DoDE CHOC ÉLEed as disconnennect the appam the mains sur est utilisé pur ne doit pasnt son utilisantrée, la prisend new batterine, standard (as viejas y nueas alcalinas, e  DUCE THE RIS, DO NOT REM). NO USERSERFER          ALIFIED SERV                   nt within an equto alert the user nt operating andns in the literatuappliance. ol’s button ceas hazardous w like all rechaehold waste. Chould never beo Not Open. ECTRIQUE - NEect device andaratus from thsocket outlet cpour déconnes être obstruétion. Pour êtree doit être débes. carbon-zinc), evas. estándar (carb         K OF         OVE         RVICEABLE                VICE                                uilateral       to the        d maintenanceure ell battery conwaste. rgeable batteContact your e incinerated E PAS OUVRId it should rehe mains comcompletely. ecter le systèmée ou doit êtrere complètemebranchée du s or rechargeabono-zinc) o r                                                                                                                                             tains mercuryries are recyc local governm since they miIR main readily ompletely, the mme. e facilement ent déconnecsecteur. able (ni-cad, nrecargables (n       The lightning flwithin an equilathe user to the voltage” within be of sufficientelectric shock         This symbol inincorporates do mains voltage y. Do not put iclable and shoment for dispoight explode. operable durinmains plug shoté de i-mh, etc) battni-cad, ni-mh, ash with arrowhateral triangle, ispresence of unthe product’s e magnitude to cto persons. dicates that thisouble insulationand user accesin the trash, ould be recycosal or recycl ng intended uould be teries.  etc.).        head symbol s intended to alninsulated “dangenclosure that mconstitute a risk   s product      n between hazassible parts. led ing use.           ert gerous  may of   rdous
6HAMPTONBAY.COMPlease contact 1-877-527-0313 for further assistance.Assembly (continued)AUDIO/VIDEO ASSEMBLYVIDEO R  LDC 15V OUTPUT AUDIO INPUT“‹The Audio/Video Dock can stream video to a T.V. and accept incoming audio. Follow the wiring guide below to connect the Audio/Video dock.1. Plug the RCA audio              cables in the the audio        dock input R/L.2. Plug the RCA video cable      into the video output.3. Plug the RCA video cable      into the video input        source.4. Plug the RCA audio        cables into the audio      source input R/L.5. Plug the power cable into      a standard outlet.6. Insert the power cable      into the DC transformer.7. Plug the DC power        source into the DC 15V      port.1.2.2.3.4.5.6.7.
7- Power / Standby- Mute- Access the menu of the docked iPhone/ iPod - Scroll through source input options- Display time- Scroll the docked  iPhone/ iPod menu or preset radio station- Conrm selection from the docked iPhone/ iPod menu- Scroll the docked  iPhone/ iPod menu  or preset radio station- Back (Previous)/ In FM mode to search the radio channel- Play/Pause- Forward (Next)/ In FM mode to search the radio channel- Adjust Treble- Adjust Bass- Adjust Volume- Main Power / Scroll through source input options- Display / Set Time- Adjust Volume- Back (Previous)- Play/Pause - Forward (Next)Audio/Video Dock RemoteAudio/Video DockAudio/Video Dock Operation
8HAMPTONBAY.COMPlease contact 1-877-527-0313 for further assistance. PowerThe POWER button on the Audio/Video Dock or Remote supplies power to all of the functions of the sound system. 1. Insert the iPod or iPhone to the dock connector.2. The docked iPod or iPhone begins charging. 1. Automatic Time Set:    The console will read and sync the clock to the time from your docked iPhone or iPod (at standby mode). 2. Manual Time Set:    Hold "CLOCK    Press the "volume     /    " buttons to set the hour.    Press "CLOCK    Press the "volume       /     "  buttons to set the minutes.    Press "CLOCK3. The clock display will fade after 10 seconds. Press "CLOCK" to continously display the time.1. Power on the unit by pressing the power button.2. Press the INPUT button to switch to FM mode.3. Press the      and      buttons to adjust the radio to the desired frequency.4. Press and hold the      and      buttons to search for a next available frequency.  Automatic Pre-Set1.The unit will automatically scan and save up to 30 preset stations by pressing and holding the      button.Manual Pre-Set1.Tune to the desired station.3. Press the     and     buttons (on the Audio/Video remote control) to select the desired station.4. Up to 30 stations may be saving as presets P01-P30. Press the "INPUT" button to scroll through the different input options:When IPOD is displayed. The Audio/ Video Dock will play sound and/or video from your docked IPod or IPhone device.When BLUE is displayed. The Audio/Video Dock will scan for other smartphones or devices. The blue "sound system" from your device will link it to the console and allow to play audio and/or video from up to 10 meters away. The light will stay continuously lit once a connection has been made to the device.When LINE is displayed, the Audio Video Dock will play audio and/or video from your television or other device connected to the console by RCA cables.When radio analog is displayed, the Audio/Video Dock will play FM radio stations. Charging Clock Tuning the FM Radio Saving a Station as a Preset Input SettingAudio/Video Dock Operation (continued)NOTE: Certain irregular shaped or large phone covers may need to be removed for use with the docking station. NOTE: Automatic time sync will not work with some older model iPods.

Navigation menu