Zhuhai HiVi Technology M3A High Fidelity Active Speaker User Manual
Zhuhai HiVi Technology co., Ltd. High Fidelity Active Speaker
User Manual
HiVi M3A
High Fidelity Active Speaker Manual
HiVi USA
11630 Goldring Road, Arcadia, CA 91006, USA
Tel:+1 626 930 0606 Fax:+1 626 930 0609 https://swanspeakers.com
HiVi Acoustics, Inc.
Due to the reasons in the change of design or others, product information contained here may
not be in conformity with product itself. We reserve the right of no prior notice before change.
1
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The lightning flash is intended to alert you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute an
electric shock to persons.
The exclamation point is intended to alert you to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
Before connecting or using this apparatus, do read carefully all safety warning and
instructions. Please keep this instruction for future reference.
This device should be installed or set up in a position that ventilation can be assured.
Never put the device in a place that air flow over the ventilation openings might be
hindered, such as in a bookshelf or a drawer.
This product should be operated only from the type of power source indicated on the back
panel of the device. The power cord of this product should be restored in a place that is
less possibly be walked on or get pierced, especially its plug, convenience receptacles and
the point where power cord exit from the apparatus.
Before cleaning this product, make sure the plug is disconnected from the outlet.
Proceed with the cleaning in the way that this instruction recommends only.
When this product is not in use for a long time, make sure to unplug the power cord from
the AC outlet.
If below problem happens, send this product to a qualified service personnel for repairing.
A. Power cord or power plug is damaged.
B. Objects have fallen or liquid has been spilled into this product.
C. This product is exposed to rain or other liquid.
D. This product functions abnormally or very poorly.
E. This product has been dropped or has a damaged enclosure.
Never to attempt to repair this product by yourself. Refer all servicing to a qualified servicing
personnel.
CAUTION
To reduce the risk of electric shock, the power plug must be completely inserted into an AC
outlet.
This product does not contain any parts or components that can be repaired by users
themselves. Do not open the enclosure, otherwise it may result in an electric shock. Refer
all servicing to a qualified servicing personnel.
When you unplug this product from AC outlet, do hold the power plug and pull.
Do not pull the power cord. Do not overload AC outlets or the extension cord, as this can
lead to risk of fire or electric shock.
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
Warning
10
Trouble Shooting
1. If there is problem with sound quality.
a) Check if all the drivers are working.
b Check that audio cables are firmly connected at both ends.
2. If there is no sound from either of the speakers:
a Check if the device is on and if a source is playing.
b Check if the volume is not on minimum.
c Check if there is broken or short circuit with the cable connecting speakers and audio
source.
3. If there is no sound coming from one of the speakers:
a Check if the source is set correctly.
b Check if there is loose connection of the audio signal cable.
c) Check if the speaker connecting cables are fully inserted.
)
)
)
)
)
)
Break-in is the procedure which can enable the speakers to perform best acoustically. A
period ranging from 48-100 hours of usage is recommended before both the amplifier and
speaker drivers behave optimally.
Alternatively, you can listen 2 or 3 hours every day at a medium volume, and the speakers
will be broken-in one month or so.
a) Avoid magnetic disturbance.
b) Do not place under the sunshine for a long time.
c) Do not place in high temperature or moist environment for a long time.
d) Do not touch the drivers with your hands.
e) Avoid corrosive liquids and gases.
a) b) c) d) e)
Maintenance
Break-in
2
When repairing or replacement of parts is required, make sure the service technician has
used the parts/components specified by the manufacturer or parts/components that have
the same characteristics as the original parts/components. Unauthorized
substitutions may result in risk of fire, electric shock or other hazards.
POWER SOURCE
Before connecting this product with AC outlet, do check and make sure the electric supply
voltage is as same as it is marked on the rear panel of this product.
WARNING: It's very dangerous to insert a power plug that has bare wire into an AC
outlet.
DECLARATION
This product does not contain any parts or components that can be repaired by
users themselves. If there is any malfunction, refer to this instruction or ask for
repair by a qualified service technician. Do not try to repair by yourself, otherwise
the manufacturer will not be responsible for any consequences resulted there from.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:-
Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC Warning
Warning
9
System Type
Frequency Range
Drivers Configuration
Signal-to-Noise
Input Sensitivity
Input Impedance
Finish
Dimensions(WXDXH)
Net Weight (each)
Harmonic Distortion
Maximum Input
Model
Wireless Input
Specifications
Master
speaker
Slave
speaker d>70 mm
STAND / DESK WALL
Speaker Placement
d>30 mm
Rated Power
HiVi M3A
3-way 4th-order vented speaker system
>91dB (Unweighted)
400mV
22kΩ
Solid wood cabinet
6.5" woofer / 2" midrange driver / isodynamic ribbon tweeter
3000mV
44Hz - 20kHz ±3dB (Free Space)
90Hz - 20kHz ≤1% (85dB/1m)
WiFi, Bluetooth 4.0
10.16"×14.37"×17.52"
37.04 lbs
RMS 120Wx2
8
Settings:
3
WiFi Connection
3
Please make sure all the following components are in the box.
Unpacking & Schematic Diagram
x 1 6
7
8
x 2
x 1
10
(1) Open your browser and enter 192.168.100.1.
(2) Click “System Setup”.
(3) Under “System Setup”, you can change system language, WiFi password etc.
Click “OK” to confirm your changes.
(4) Click “Reboot”.Whenyou hear “欢迎使用智能云音响”, reboot succeeds.
Note that each time after the change, the speakers should be reconnected to WiFi network.
(5) Software Update
(6) Click “restore factory settings”, after the beep, restart succeeds.
Or press on “Mute” key on the remote control for 5 seconds.Indicator light flashes red twice.
Restart succeeds after the beep.
192.168.100.1 Cancel
192.168.100.1
Browser
OK
Firmware Upgrade
OK
Restore factory settings
Reboot
Current Firmware Version("V4.0.0.1-1712261956-
HIVI2
-
T022
")
System Tools
Files...Location
Setup successfully, reboot to take effect!
Close
WiFi Setup
Select Your Wireless
Network
System Setup
XXXXX
Select the wireless network that you would like your device
to use w hen sen ding an d recei vi ng au di o dat a to a nd fr om t he APP.
If you do not see the wireless network you wish to join, click “Other”
to enter it manually. Then enter your wireless network password
and click on the Connect button.
Available Wireless Networks
Refresh
English
WAN
192.168.100.1
HiVi M3A_xxxx
WPA2PSK/AES
1500
Router
Network Mode
Language
Ethernet port
Gateway AN :
Device Name
WIFI Security Mode
Airplay Buffer
(L )
WIFI Security Key
System Setup
WiFi Setup
Firmware Upgrade
OK
Restore factory settings
Reboot
Current Firmware Version("V4.0.0.1-1712261956-
HIVI2
-
T022
")
System Tools
Files...Location
Firmware Upgrade
OK
Restore factory settings
Reboot
Current Firmware Version("V4.0.0.1-1712261956-
HIVI2
-
T022
")
System Tools
Files...Location
1
4
5
3
2
Manual
9
x 1
11
13
15
17
12
14
16
18
BT
AUX MUTE
WiFi
BAL
OPT
VOLUME
x 1
WWireless Connection
2
WiFi Connection
4
3. Woofer 4. Receiver
5. Indicator Light
6. Power Cable 7. Aux Connecting Cable
8. Optical Connecting Cable 9. Speaker Connecting Cable
10. RCA to 3.5mm Converter
11. Aux Input (Sky Blue Light) 12. Mute (Red Light)
13. Bluetooth Input (Blue Light) 14. WiFi Input (Green Light)
15. Optical Input (White Light) 16. Balance Input (Yellow Light)
17. Volume Down 18. Volume Up
19. Vent Tube
20. Volume/Source Control: Turn clockwise to increase the volume
Press repeatedly to cycle through the available modes
(Aux, Bluetooth, WiFi…)
21. Aux Interface 22. Optical Interface
23. LAN Interface 24. Radiator
25. Balance Interface 26. Speaker Out
27. Speaker In 28. Power Switch
29. Power Socket
1. Isodynamic Ribbon Tweeter 2. Midrange Driver
Unpacking & Schematic Diagram
1) Open Settings app on your phone and select WiFi. Choose HiVi M3A_ xxxx.
Enter password 12345678.
2) Connected.
3) Open browser and enter website 192.168.100.1.
4) Click on Refresh, and choose your home WiFi network.
5) Enter password and connect. Note: No special characters allowed.
6) When you hear “欢迎使用智能云音响”restart succeeds.Connected. Close the browser.
7) Reopen the Settings app, and choose your home WiFi network.
8) Open music player and enjoy your music. Click and choose HiVi M3A_ xxxx.
When not connected to the Internet, the speaker still can play music via WiFi. But it's only
limited to the local music.
7
Your device has been succes sfully connected to
the wireless network, restarting...
Close
WIFI Setup
Connection of your device to
"XXXXX" was successful!
You ha ve successfu lly c onn ect ed your device t o you r Mac ,
PC or tablet ! Cli ck Ne xt to r estart the dev ice , you c an
reconnec t you r com puter or table t to yo ur ho me wi reless
network, O pen s upp ort APP can c ont rol y our d evice.
00:37 04:37
iPhone
HiVi M3A _xxxx
Cancel
192.168.100.1 Cancel
192.168.100.1
Browser
Enter the password for “HiVi M3A _xxxx"
Enter Password
Cancel Join
Password
Setting WiFi
WiFi
HiVi M3A _xxxx
Other...
CHOOSE A NETWORK ...
XXXXX
***********
Connect
Wireless Network Name
Wireless Network Password
Setting WiFi
WiFi
CHOOSE A NETWORK...
Ask to Join Networks
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
HiVi M3A _xxxx
19
20
21
22
23
24
25
26 27
28
29
WiFi Setup
Select Your Wireless
Network
System Setup
XXXXX
Select the wireless network that you would like your device
to use w hen sen ding an d recei vi ng au di o dat a to a nd fr om t he APP.
If you d o not see t he wire le ss ne tw ork y ou w ish t o jo in, c li ck “Other”
to enter it manually. Then enter your wireless network password
and cl ick on th e Conne ct butt on .
Available Wireless Networks
Refresh
Setting WiFi
WiFi
CHOOSE A NETWORK...
Ask to Join Networks
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
HiVi M3A _xxxx
WiFi Setup
Enter Your Wireless
Network
Ente r your Wi reles s ne two rk n ame a nd W ire le ss ne tw ork
password, and Click the “Connect” button if the connection fails,
chec k the wir eless n etwor k na me an d pa ssw or d are w ro ng.
WiFi Setup
MAX
MIN
VOLUME
AUX
L
R
OPTICAL
LAN
BAL
L
R
LEFT O UT
ON OFF
POWER
Importer Address: xxxxxxxxxxxxxxxxx
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
Model: HiVi M3A High Fidelity Active Speaker Power: 1 10V~ 60Hz IN T4AL250V
Designed by HiVi Acoustics, Inc. Zhuhai HiVi Technology co., Ltd.
NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P.R.China
FCC ID: XXXXXXX
Made in China
110V~ 6 0Hz IN T4 AL250 V
Importer Name: xxxxxxxxxxxxxxxxxxx
ON OFF
POWER
LEFT IN
110V~ 6 0Hz IN T4 AL250 V
Model: HiVi M3A
High Fidelity Active Speaker
Power: 110V~ 60Hz IN T4AL250V
Designed by HiVi Acoustics, Inc.
Zhuhai HiVi Technology co., Ltd.
NO.1, South Dongcheng Road,
Liangang Industrial Zone, Zhuhai,
Guangdong, P.R.China
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
FCC ID: XXXXXXX
Made in China
Importer Name: xxxxxxxxxxxxxxxxxxx
Importer Address: xxxxxxxxxxxxxxxxx
5
a) Connection between speakers.
b) Speaker connection with power.
c) Speaker connection with computers, TV and tablets etc.
d) Speaker connection with router.
e) Optical connection with CD/DVD/TV.
Speaker Connection
CD/DVD/TV c
e
Mobile Phone
Ipad
Computer
TV
Router
d
1) Choose HiVi .
Enter password 12345678.
2) Connected.
3) Open music player and enjoy your music.
Click icon and choose HiVi M3A.
When not connected to the Internet, the speaker still can play music via WiFi. But it's only
limited to the local music.
Open Settings app on your phone and select WiFi. M3A
Bluebooth Connection
Plug the speaker to a network connection. Both stream and local music can be played when
connected.
Wired Connection
1
Select WiFi mode via the remote control or press Volume/Source control on the back panel.
Indicator light should flash green. When connected, the light should be steady.
00:37 04:37
iPhone
HiVi M3A _xxxx
Cancel
Setting WiFi
WiFi
CHOOSE A NETWORK...
Ask to Join Networks
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
HiVi M3A _xxxx
Enter the password for "HiVi M3A _xxxx"
Enter Password
Cancel Join
Password
Setting WiFi
WiFi
HiVi M3A _xxxx
Other...
CHOOSE A NETWORK ...
Select mode via the remote control
Indicator light should flash blue. Choose HiVi M3A.
Steady blue light indicates successful Bluetooth connection.
Bluebooth or press Volume/Source control on the back
panel.
WiFi Connection
6
MAX
MIN
VOLUME
AUX
L
R
OPTICAL
LAN
BAL
L
R
LEFT OUT
ON OFF
POWER
Importer Address: xxxxxxxxxxxxxxxxx
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
Model: HiVi M3A High Fidelity Active Speaker Power: 110V~ 60Hz IN T4AL250V
Designed by HiVi Acoustics, Inc. Zhuhai HiVi Technology co., Ltd.
NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P.R.China
FCC ID: XXXXXXX
Made in China
110V~ 6 0Hz IN T4 AL250 V
Importer Name: xxxxxxxxxxxxxxxxxxx
MAX
MIN
VOLUME
AUX
L
R
OPTICAL
LAN
BAL
L
R
LEFT OUT
ON OFF
POWER
Importer Address: xxxxxxxxxxxxxxxxx
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
Model: HiVi M3A High Fidelity Active Speaker Power: 110V~ 60Hz IN T4AL250V
Designed by HiVi Acoustics, Inc. Zhuhai HiVi T echnology co., Ltd.
NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P.R.China
FCC ID: XXXXXXX
Made in China
110V~ 60Hz IN T4AL250V
Importer Name: xxxxxxxxxxxxxxxxxxx
ON OFF
POWER
LEFT IN
110V~ 60Hz IN T4AL250V
Model: HiVi M3A
High Fidelity Active Speaker
Power: 110V~ 60Hz IN T4AL250V
Designed by HiVi Acoustics, Inc.
Zhuhai HiVi Technology co., Ltd.
NO.1, South Dongcheng Road,
Liangang Industrial Zone, Zhuhai,
Guangdong, P.R.China
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
FCC ID: XXXXXXX
Made in China
Importer Name: xxxxxxxxxxxxxxxxxxx
Importer Address: xxxxxxxxxxxxxxxxx
220-240V~ 50/60Hz
S Inpeaker
Speaker Out
a
Slave SpeakerMaster Speaker
b
MAX
MIN
VOLUME
BT
AUX MUTE
WiFi
BAL
OPT
VOLUME
BT
AUX MUTE
WiFi
BAL
OPT
MAX
MIN
VOLUME
AUX
L
R
OPTICAL
LAN
BAL
L
R
LEFT OUT
ON OFF
POWER
Importer Address: xxxxxxxxxxxxxxxxx
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
Model: HiVi M3A High Fidelity Active Speaker Power: 110V~ 60Hz IN T4AL250V
Designed by HiVi Acoustics, Inc. Zhuhai HiVi T echnology co., Ltd.
NO.1, South Dongcheng Road, Liangang Industrial Zone, Zhuhai, Guangdong, P.R.China
FCC ID: XXXXXXX
Made in China
110V~ 60Hz IN T4AL250V
Importer Name: xxxxxxxxxxxxxxxxxxx
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.