Zhuhai Unitech Power Technology DNYS-2C Smart key User Manual

Zhuhai Unitech Power Technology Co., Ltd. Smart key

User Manual

DocumentCategory:R&DDocConfidentiality:Oopen
DocumentNumber:UMDNYS2C002SConfidential
Version:V1.00TSConfidential
DNYS2Csmartkey
OperatingManual
Tota l 30pages
Zhuhai Unitech Power Technology Co., Ltd.
OCT 20, 2014
ApprovalforDocuments:
Department/PositionSignatureDate
PreparedbyProductdevelopment/softwareengineerLuHaijiang,Tan
Yi2014.10.20
CheckedbyR&DManagementDepartment/RQAXuLan2014.10.20
VerifiedbyStructureDepartment/ProjectManagerYinXuewen2014.10.20
CountersignedbyHardwareDepartment/hardware
representativeChenPengzhi2014.10.20
CountersignedbyStructureDepartment/Structure
RepresentativeLiQiping2014.10.20
CountersignedbyProductDevelopmentDepartment/
SoftwareRepresentative
TanYi2014.10.20
ApprovedbyProductPlanningDepartment/product
managerXiuHongjiang2014.10.20
DocumentRevisionHistory:
VersionSummaryofmodification Modifiedby Approvedby Effectivedate
1.00InitialversionLuHaijiang XiuHongjiang 2014.10.20

Copyright
The copyright of the DNYS2C MiniSmart Key Operating Manual is owned by Zhuhai Unitech
Power Technology Co., Ltd. No part of the Manual shall be copied or disseminated in any form by
any means, electronically or mechanically, including photocopying or recording, or for any
purpose, without written permission of Zhuhai Unitech Power Technology Co., Ltd.
(c)Copyright 2014 Zhuhai Unitech Power Technology Co., Ltd. All rights reserved.
is a registered trademark of Zhuhai Unitech Power Technology Co., Ltd.
Guide
READING GUIDE
Manual Objective:
The Manual mainly provides operating instructions on DNYS2C Smart Keys and auxiliary
iAdapterE-1 transmission adapter and iCDZE-1 recharge stand products supplied by Zhuhai
Unitech Power Technology Co., Ltd. To enable product users to have a basic understanding
of product functions, performance and characteristics and grasp product operating and
maintenance methods.
Audience:
The Manual, prepared for DNYS2C Smart Key users, mainly includes contents such as
operation, parameter settings and production maintenance, and is mainly to provide the
operating method of this product for operators.
Structure:
ThisManualcontainsthefollowingcontents:generalinformationandfeaturesareintroducedin
thefirstchapter.Productinstallationandprecautionsaredescribedinthesecondchapter.The
appearanceandbasicoperations,aswellaseachmenutobeoperatedbyusersaredescribedin
thethirdchapter.Thedefaultingparametersettingsareintroducedinthefourthchapter.Display
informationanddataduringusingprocessaredescribedinthefifthchapter.Thesixthchapter
describestheproductmaintenanceandtroubleshootingmethods.
Conventions:
Themanualcomplieswiththefollowingconventions:
1Allthemenuscomewith“”;
2AllreferencesadoptItalic;
“NOTE”meansthemattersrequiringreaderstopayattention.
“WARNING”meansthemattersthatmaycauseseriouserrorsandmustbeattended.
Foreword
Theproductsaremainlyusedinpowerindustryinterlockbyforeignterminals,suchas
substations,powerplants,etc.ItiscapabletoreceiveoperatingordersfromSmartinterlockhosts,
andthentooperateallkindsoflocksinstrictoperatingorders.InSmartinterlocksystem,the
smartkeyisusedasahandhelddevicebetweenthehostanddeviceonsite,andregardedasone
ofthemostcriticalsystemcomponents.Thisproductisdevelopedbaseonthecompany'sexisting
key,whichintegratescurrentnewtechnologiesonthemarket,andsatisfiestheneedsofusers,
thustohavepowerfulcompetitivenessoftheSmartinterlocksystemmarket.
Warning:Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsible
forcompliancecouldvoidtheusersauthoritytooperatetheequipment.
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital
device,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonable
protectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,
usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe
instructions,maycauseharmfulinterferencetoradiocommunications.However,thereisno
guaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescause
harmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningthe
equipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormore
ofthefollowingmeasures:
Reorientorrelocatethereceivingantenna.
Increasetheseparationbetweentheequipmentandreceiver.
Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris
connected.
Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
TableofContents
CHAPTER1OVERVIEW.........................................................................1
1.1INTRODUCTION ............................................................................. 1
1.2SCOPEOFAPPLICATION .................................................................... 1
1.3FUNCTIONSANDFEATURES ................................................................ 1
1.4MODELANDCONFIGURATION ............................................................ 2
CHAPTER2INSTALLATION....................................................................2
2.1INSTALLATIONSTEPS ....................................................................... 2
2.2INSTALLATIONCAUTIONS .................................................................. 2
CHAPTER3OPERATION........................................................................3
3.1DISPLAYPANEL .............................................................................. 3
3.2OPERATIONS ................................................................................ 4
3.2.1Basicoperations .................................................................. 4
3.2.2Synchronization ................................................................... 5
3.2.3ReceiveOperationOrders ..................................................... 6
3.2.4Unlock ................................................................................ 7
3.2.5PostBack .......................................................................... 15
3.2.6Browseorders ................................................................... 16
3.2.7Function ........................................................................... 17
3.2.8Settings ............................................................................ 19
3.2.9About ............................................................................... 26
CHAPTER4:PARAMETERSETTINGS.....................................................27
4.1AUTOPOWEROFF ....................................................................... 27
4.2AUTOSLEEPMODE ....................................................................... 27
4.3INTERFACEBRIGHTNESS ................................................................. 27
4.4DISPLAYLANGUAGE ...................................................................... 27
4.5.INTERFACETHEMES ...................................................................... 27
4.6SPEAKERSTATUS .......................................................................... 27
4.7.RECORDINGFUNCTION .................................................................. 27
4.8AUDIOCOMPRESSION .................................................................... 27
CHAPTER5DISPLAYDESCRIPTIONS....................................................28
CHAPTER6PRODUCTSMAINTENANCE...............................................29
6.1UPGRADEMAINTENANCE ................................................................ 29
6.2ROUTINEMAINTENANCE................................................................. 29
6.3TROUBLESHOOTING ...................................................................... 29
1
Chapter1Overview
1.1Introduction
DNYS2CsmartkeyisanewtypeofOLEDcolorscreensmartkeybasedonthe“Doubleless”technologyofthe
company,basedonourapplicationanddevelopmentexperienceovertheyears,whichcanbeoperatedin
conjunctionwithJOYOseriesofmicrocomputersafetyinterlocksystems.The“Doubleless”technologyisanew
acquiringandcodingtechniquedevelopedbythecompanyunderhugeinvestments,whichhasgainedmany
patentsandisespeciallyapplicabletotheSmartinterlockfield,characterizedbylimitlesscodingandwireless
acquiring.
TheDNYS2Csmartkeyhasbeenessentiallyupgradedandimproved,nomatterintechnology,performance,and
manufactureprocess,comparedwiththeprevioustypeofsmartkeys,anditiscapableofmeetingthecustomers
newrequirementsoninterlockdevicessuchastheapplicationsincentralizedcontrolstation.
1.2Scopeofapplication
Applicabletointetlockofsubstations,powerplants,etc.
1.3Functionsandfeatures
Theproducthasthefollowingfunctionsandfeatures:
9 Limitlesscoding;andthecodingsystemadoptstheGUID;
9 Wirelesscodeacquiring;thesmartkeyadoptsthenoncontactacquisitionmode.
9 “BlackBox”function:Recordingandbrowsingtheoperationordersandtheoperationinformation;thedata
canbewellsavedwithin10yearsafterpoweroff;
9 Thesmartkeyfunctionsasorderclearance,synchronization,memory,lockcodechecking,terminationofthe
currentoperationorder,stepskipping,realtimeclock,batteryelectricquantitydetection,selfdiagnosis,etc.
9 Itcanreleaseanddetectvariouslocksasfollows:
Mechanicalcodinglock
fixedprogramlock
Electriccordinglock
Lockingbox
Electroscope
Statedetector
Highvoltagepresenceindicatingsystems
9 ThesystemisprovidedhighspeeddatatransmissionmodulesuchashighspeedinfraredIRDAmodule.
9 VoicepromptinEnglish;
2
9 Availableinrecordingfunction,equippedwithlargecapacityrecording&storagedevice,availabletobe
selectedaccordingtoneeds.
9 OLEDcolorscreentoenhancethevisualeffects.
9 Highcontrast,multilineChinesecharacterdisplay.
9 OLEDscreen,adjustabledisplaybrightness,thustomeettheneedsofdifferentusers.
9 Friendlyinterface,easytouse,simple.
9 Intelligentpowermanagementtechnology,automaticdetectionofbatteryfailure,thustoensurethe
systemisrunningatlowpowerconsumptionandextendsbatterylife.
9 Lithiumionbattery,withbuiltindesign.
9 CompatiblewithChinesecharacters&EnglishcharactersunderGBKencodingstandards
9 Supercapacitymemory;expandableasneeded;
9 DevelopedbasedontheRealTimeOperatingSystem(RTOS);highstability;convenientextension;
9 Integratedmechanismandoverallmetalframedesigntoenhanceitsfallresistanceandimpact
resistance;
9 Brandnewstructureintegratingfunctionssuchascodeacquisition,detection,andreleasingmechanical
lock,forasimpleandconvenientoperationandtheimprovementonthestability,reliability,and
productbility.
1.4Modelandconfiguration
ProductName:smartKey
Model:DNYS2C
Chapter2Installation
2.1InstallationSteps
Handheldstandaloneproduct,noneedsinonsiteinstallation;availabletobeplaceddirectlyontheadapter
2.2Installationcautions
1.Whenitisbeingplacedontheadapter,pleaseensuretheadapterneedlesareproperlycontactedwithcharging
contacts.
2.Placement:whenthesmartkeyisnotinservice,pleaseplacethesmartkeyinafixedplace,ratherthanrandom
places.
3.Donotplacethesmartkeyinanyspeciallywetenvironmentinalongterm,toextendtheservicelifeofthe
smartkey.
3
4.Thesmartkeyisproductintegratingmachinery,optic,andelectrictechnologies,withacomplexinternal
structure,exceptasauthorizedbyitsmanufacturer,pleasedonotdisassembletoavoidanydamagetointernal
components.
5.Pleasekeepitsdatatransmissionportsclean,toavoidanydamagetodatatransmissionperformance.
6.Smartkeyisaprecisionpowerhandhelddevices;pleaseavoiddamageandabnormalityresultingfromstrong
shockorfalling.
Chapter3Operation
3.1DisplayPanel
1‐‐‐‐‐‐‐Releaserod:releasethemechanicalcodinglock,orotherlocks;
2‐‐‐‐‐‐‐Disk,determiningtherotatingdirectionofreleaserodinunlocking.
3‐‐‐‐‐‐‐Conductiveelectrode,poweringonlocksneedingexternalpowersupply.
4‐‐‐‐‐‐‐OLEDcolorscreen:displayingtheoperationinformationbycharactersandgraphicsinformation;
5‐‐‐‐‐‐‐Keys,includingtheReturnkey(theSwitchon/offkey),theUpkey,theDownkey,andtheEnterkey
6‐‐‐‐‐‐‐Speakerandphonichole;
7‐‐‐‐‐‐‐MiCmicrophoneforrecording.
8‐‐‐‐‐‐‐Infraredtubecommunicationinterface.
9‐‐‐‐‐‐‐USBdatalineinterface.
10‐‐‐‐‐‐Chargingelectrodecontactingwiththechargingmount.
4
11‐‐‐‐‐‐HighspeedinfraredIRDAtransmissiondeviceforexchangingdatawithmisoperationpreventionhosts.

3.2Operations
3.2.1Basicoperations
¾ Poweron
(1)Ensurethatthesmartkeyisavailabletobepowered.Ifthebatteryrunslow,thesmartkeycan’tstart,please
operateinaccordancewiththesecondstep.Whenthepowerisenough,pleaseoperateinaccordancewiththe
thirdstep.
(2)Placethesmartkeyonthechargerandcheckifitisproperlyplacedandisstablyconnectedtothecharger.
(3)Presstheon/offkeyonthepanel,andthenreleaseit,thesmartkeyproduces“Beep”soundanddisplaysthe
dynamicLOGOontheinterface,andshowsthefollowingstandbyinterfacelater:
Thereinto:
z“ “isasymbolofbattery,indicatingthecurrentrunninglevelofthebattery,thefullgreencolorindicates
thatthebatteryrunsinfulllevel;thefullblackcolorindicatesthatthebatteryrunsout.Whenthebatterysymbol
isempty,indicatesthebatteryrunsout,pleasechargethebatteryimmediately.“iconindicatessmartkey’s
currentcommunicationmode,theaboveiconmeansIRDAcommunicationmode.”iconindicatesthecurrent
voicestate,andavailabilityinplayingvoice.Theabovefigureshowsenablementstateofthefunction,and
showsdisablementstate.Seespecificsettingmethodinthe“Settings”‐>“VoiceFunc”‐>“SetVoice”asdescribed
in3.2.8VoiceSettings.
¾ Poweroff
Itisavailabletoclosethesmartkeyatanystateafterstarting.AusercanpressandholddowntheOn/Offkeyon
thepanelforabout2seconds,thesmartkeyproducesthesound“beep…beep…”,thentheusercanreleasethekey,
thekeycanswitchoffthepowersupplyautomatically.
¾ PreparationbeforeOperation
Thesmartkeyisageneralpurposesmartkey,whichcanbeappliedtoanystation,anditisrequiredtoenablethe
“Sync”functionbeforeoperation,thustotransmitthestation'sdeviceinformationtothesmartkey.Ifthedevice
informationisnotmodifiedinastation,thesmartkeycanbeusedforeveraslongasenabled“Sync”.
5
¾ MenuOperation
Inthestandbyinterface,pressthe“Menu”keytoentermainmenu:ThenpresstheUPorDownkeystobrowsethe
wholemainmenu,asshownbelow:
  
  
Thereinto:
zThe“Receive”isthedefaultoptiononthemenu,indicatingtheoptionisselected.NowauserpressestheDown
keytoselectthenextoptiononthemenu,similarly,itisavailabletopresstheUpkeytoselectthepreviousoption.
zWhenselectinganoptiononthemenu,presstheEnterkeytoenterthefunctionmenuinterfaceorthe
submenuinterface;presstheCancelkeytothestandbyinterfaceortheoption'sparentmenu.
zWhenauseroperatesonasubmenu,itcandisplaythescrollbariconontherightsideofthescreen,toshow
thecurrentpositionoftheselectedsubmenu.
3.2.2Synchronization
Thesmartkeyfeaturesgoodinterchangeabilityandversatility,itcanbeapplicabletodifferentsubstationsor
powerplantsoncesuccessfullysynchronized beforethefirstoperation.
Itisavailabletoreceivesynchronousdatadirectlyinthestandbyinterface,orselect“Function”onthemainmenu,
andthenselectthe“Sync”optiontodirectlyenterthesynchronousinterface;thesmartkeycanreceivethe
synchronousdataatomically.
6
Thereinto:
zPresstheReturnkeytothepreviousmenu
Whenthekeyisbeingchargedonthetransmissionadapter,thekeycanreceivesynchronousdataiftheusersets
hostsystemtothesynchronousstate,andthesmartkeyentersthesynchronousinterface.
Whenthekeystartsreceivingsynchronousdata,itcandisplaythefollowinginterface,theprogressbarshowsthe
receivingprogressofsynchronousdata.
Whenthesynchronousdatahavebeenreceived,thesmartkeyiscapableofprocessingandsavingthereceived
data.
3.2.3ReceiveOperationOrders
AusercanpresstheUpwardorDownwardkeytoselecttheoption“Receive”onthemainmenu,andpressEnter;
itcanentertheorderreceivinginterface.ThenSmartKeycanenterorderreceivinginterfacedirectly.

Thereinto:
zIfthekeyhasn’tsynchronized,itcannotentertheorderreceivinginterface,thescreendisplaystheinformation
“Withoutsync,cannotreceiveorder,andausermustconductsynchronizationbeforereceivingorders.
zPresstheOn/Offkeytothemainmenu.
Whenthekeyisbeingchargedonthetransmissionadapter,thekeycanreceiveordersiftheusersetshostsystem
totheordersendingstate,andthesmartkeyenterstheorderreceivinginterface.
Whenthekeystartsreceivingorderdata,itcandisplaythefollowinginterface,theprogressbarshowsthe
receivingprogressoforderdata.
7

Whenthesmartkeyhasprocessedandsavedthereceiveddata,thekeycanswitchtothefollowingoperating
interfaceautomatically.
Ausercanoperateonsitenowinaccordancewiththedisplayedcontent.
3.2.4Unlock
z UnlocktheDevicesLockedbyMechanicalCodingLocksSuchasManualDisconnector,Groundingswitch,and
Temporar yGroundingConnectorLockingBox
Thesmartkeycandisplaythespecificdeviceinformationunderoperatingwhileunlockingthemechanicalcoding
lockssuchasmanualdisconnector,groundingswitch,andtemporarygroundingconnector,webdoor,etc.For
example,ifauserwantsto“61Eline:OpenBreaker,thekeycandisplaythefollowinginformationatthismoment:
Findthecorrespondingdevicematchedwiththedisplayedbythekeyonsite,andinsertthesmartkeyintothe
keyhole,ifthecodeiscorrect,thesmartkeycanring“beep”ormakeavoiceprompt“Correct,PleaseOperate.
(Availabletosetinthesystem)anddisplayasfollows:
8
Rotatethesmartkeytoopenthemechanicalcodinglockatthismomentandthenswitch.
Whenthecorrectoperationiscompleted,thesmartkeycanring“beep”andprompt“Operationfinished”

Thentheoperatorcancontinuethenextoperation.
Note:forexmaple,in“Confirm61EBreakeroperation”,iftheinsertedlock’codeisnotconsistentwiththe
displayedinthekey,thekeycanring“beep”threetimesormakeavoiceprompt“Error,PleaseCheck.(Available
tosetinthesystem)anddisplaybelow,theaboveisthesametoothertypesoflocks.
Atthismoment,theoperatorcan’tunlockbecausetheinterlockinggearislocked.Pleasepulloutthekeyandfind
thecorrectcodebeforecontinuing.
z UnlocktheDevicesInterlockedbyElectricCodingLocksSuchasCircuitBreaker,ElectricDisconnector,etc.
Whenthesmartkeydisplaysthedeviceinformationofcircuitbreakerorelectricdisconnector,suchas“74Eline:
OpenBreaker,pleaseinsertthesmartkeyintotheelectriccodinglockofcorrespondingdevice,itcanring“beep
orpromptbyvoice“Correct,PleaseOperate.(Availabletosetinthesystem)anddisplay“CorrectCode,Please
Operate!”
9
Switchthebreakeratthismoment,thekeyrings“Beep”anddisplays“theoperationiscompleted,please
continue!”indicatingthatthekeyhasdetectedthecompletionsignal.Itisavailabletounplugthesmartkeyand
continue.
Ifthekeyisunpluggedwhenithasnotdetectedthecompleteoperationsignalwithin2secondsunderthe
operationofelectriccodinglock,itcanshowasbelow:

Pressandholddownthe“success”or“failure”key(for2seconds)toselecttheoperatingresults,“success”
indicatesthatthisstepiscomplete,thekeycanenterthenextstep;“failure”indicatesthatthisstepisnot
completedandwillberestarted.
Ifthekeyisunpluggedwhenithasnotdetectedthecompleteoperationsignalover2secondsundertheoperation
ofelectriccodinglock,itcanshowasbelow:
Pressandholddownthe“success”or“failure”key(for2seconds)toselecttheoperatingresults,“success”
indicatesthatthisstepiscomplete,thekeycanenterthenextstep;“failure”indicatesthatthisstepisnot
completedandwillberestarted.
z UnlocktheDevicesInterlockedbyElectricCodingLockandMechanicalCodingLockSuchasElectric
Disconnector.
Whenthesmartkeydisplaystheinformationofthedevicestobeoperated,pleaseinsertthesmartkeyintothe
electriccodinglockormechanicalcodinglockofcorrespondingdevice,itcanring“beep…”orpromptbyvoice
“Correct,PleaseOperate!”(Availabletosetinthesystem)anddisplay“CorrectCode,PleaseOperate.
10
Ausercanoperateelectriccodinglockormechanicallockasneeded,thentheuserchosetoinsertthemechanical
locksandRotatethesmartkeytounlock,thesmartkeyrings“beep”anddisplaysthefollowinginformation:

Itindicatesthatthesmartkeyhascompleteditsworking;theusercanremovethesmartkeyandcontinuethenext
operation.
Whileinsertingthecorrespondingelectriccodinglock,itisavailabletooperateinaccordancewiththesteps
describedin“3.4.2UnlocktheDevicesInterlockedbyElectricCodingLocksSuchasCircuitBreaker,Electric
Disconnector,etc.
z StateDetection
Thesmartkeyshowsthestateofthedevicetobedetected,pleasefindthecorrespondingconnectionor
disconnectionstatedetectors,electricalswitchingstatedetectorsinaccordancewiththedevicenumbershownon
thesmartkey,andinsertthesmartkey;thesmartkeycancontinueitsworkingonlyafterdetectingthecorrect
state.TakeConfirm81EBreakerinclosepositionasanexample.

Insertthekeyintocorrespondinglocks,ifcodevalueiswrong,thesmartkeywillbeepforcontinuousthreetimes,
orevenpromptavoice“Error,pleasecheck.Ifthecodevalueiscorrect,thesmartkeywillfurtherdeterminethe
statusoflocksandpromptdetectingstatus:
11

z ElectriferousDetection(electroscope,highvoltagelivelockingdevice)
Insertthesmartkeyintothecorrespondingelectroscopeforfurtherelectriferousdetection,whenthesmartkey
displayselectriferousdetectionandthenextoption.iftheelectriferousdetectioniscorrect,andtheoperationis
successful,itisavailabletoenterthenextstep.
Taking“Verifiedthat73EBreakerhasnovoltageasanexample:
Whenthesmartkeydisplaysthefollowinginformationinthedetectingprocess:
12
Andproducesrapidalarmsound“Beep…Beep…Beep…”indicatingthecircuitsareelectriferous,andcan’tenterthe
nextoperation.
Whenthesmartkeydisplaysthefollowinginformation,andrings“Beep,itindicatesthatthecircuitsaren’t
electriferous,removethesmartkeyfromtheelectroscopeandenterthenextoperation.
z Lockdisconnectorsandrelatedequipmentswithfixedprogramlock
Lockingdisconnectorsandrelatedequipmentswithfixedprogramismainlydividedintothreecasesaccordingto
fixedprogramlockspecifictypes.Firstly,thefixedprogramlockscanbedividedintothreetypes:thefirsttypeis
fixedprogramlock(onewaylock),unlockandthenlock;thesecondtypeisonewayfixedprogramlock(oneway
lock),unlockorlock;thethirdtypeisfixedprogramlock(twowaylock).
Asforthefirsttype,fixedprogramlock(onewaylock),taking“62ELine:OpenBreakerasanexample.Insertthe
keyintothefixedprogramlock,untilthesmartkeybeepsandprompts“Correct,pleaseoperate”(availablein
systemsettings);anditdisplaysasfollows:
Rotatethesmartkeytounlock;thesmartkeypromptsthefollowinginterfaceafterunlockingissuccessful;thenit
isavailabletooperaterelateddevices:
13
Afteroperationiscompleted,pleaselockaspromptedbythesmartkey;insertthesmartkey.Whenitpromptsthe
lockcodeiscorrect,rotatethesmartkeytolock:

Theaboveisoperationstepsforthefirsttypeoffixedprogramlock.
Secondly,asforonewayfixedprogramlock(onewaylock),taking“62ELine:OpenBreakerasanexample.Insert
thekeyintothefixedprogramlock,untilthesmartkeybeepsandprompts“Correct,pleaseoperate”(availablein
systemsettings);anditdisplaysasfollows:
Rotatethesmartkeytounlock;thesmartkeypromptsthefollowinginterfaceafterunlockingissuccessful;thenit
isavailabletooperaterelateddevices:
Theaboveisoperationstepsforthesecondtypeoffixedprogramlock.
14
Thereinto:
Theoperatingproceduresforthesecondtypeareonlyhalfofthefirsttype’s.thewholeoperationcanbe
completedonlyafterunlockingorlockingends.
Finally,asforthethirdtypeoffixedprogramlock(twowaylocking),suchfixedprogramlockrequiresfourcode
values,whicharetwicemorethanthefirsttwolocks’,respectivelyconnectingfixedprogramlocksunlockingcode;
connectingfixedprogramlockslockingcode;disconnectingfixedprogramlocksunlockingcode;disconnectingfixed
programlockslockingcode.Take“62ELine:OpenBreakerasanexample.Insertthekeyintothefixedprogram
lock,untilthesmartkeybeepsandprompts“Correct,pleaseoperate”(availableinsystemsettings);anditdisplays
asfollows:
InunlockingprocessofCloseBreaker,thefirststepisdisconnectingunlocking,afterthelockcodeisverifiedas
correct,pleaserotatethekeytounlock:


Whenthedisconnectingunlockingissuccessful,unplugthesmartkey,andthekeyprompts:
Operatecorrespondingswitchingdevices,andaftertheoperationissuccessful,insertthesmartkeytolock
connectingposition.Afterthelockcodeisverifiedascorrect,pleaserotatethekeytolock:

15
 

Theaboveisoperationstepsforthethirdtypeoffixedprogramlock.
Thethirdcategoryoffixedprogramlockoperationiscomplete.
Thereinto:
Asforthethirdtypeoffixedprogramlock,itsunlockingissimilarwiththefirsttype’s,theonlydifferenceisthat
thethirdtypeoffixedprogramlockoperatestwiceontwofixedprogramlocksonthesamedevice,whilethefirst
typeoperatesafixedprogramlock.
OpenBreakersoperationissimilarwithClosebreakers,andthedifferenceisonlylockorderandoperation,
connectingunlockingisfirstlydone,andthenthedisconnectinglockingisperformed.
3.2.5PostBack
Thedatapostbackisatransmissionprocessoftheoperationprocessesandresultsandotherinformationfromthe
smartkeytothemimicpanel,(orintegratedoperatingpanel,etc.)Whenthekeycompletesthecurrentoperation
order,itwillautomaticallypromptthepostbackinformationonthecompletionofoperation.Ifthekeyisclosed
beforepostback,itcanpromptsuchinformationagainautomaticallywhenitrestarts;thenormalpostback
interfaceisshownasfollows:
Iftheoperationordersarefullyexecuted,itcanputbacktotheadaptorforpostedback,butyoualsocanusesthe
“function”menu’sfeature.SelecttheSuspend“option,itcandirectlypostbackdatanomattertheoperation
ordersfinishedorwhat.Itisavailabletoexecutethepostbackifthemimicpanel(ortheintegratedoperation
panel)isbeinginthepostbackstate.Itcanreturntothemainmenuautomatically;
Thesuspensionpostbackinterfaceisshownasfollows:

16
3.2.6Browseorders
z BrowseOrderContents
Theorderbrowsingfunctionsasbrowsingandcheckingthecontentofthecurrentoperatingorderinthesmartkey.
SelecttheMainMenu‐Browse”>CurrentContentstoentertheoption.Ifthesmartkeyhasnotany
operatingorder,itwillprompt“Nooperationordertoreview,ifthesmartkeyhasreceivedtheoperatingorder,
presstheEnterkeytoshowthecontentsonthefirstitemofthecurrentoperationorder.PresstheDownkeyto
showthecontentsofthenextitem,presstheUpkeytoselectthecontentofpreviousitem,asshownbelow.Press
theReturnkeytothepreviousmenu.
z BrowseRecall
Theoptionistobrowseandcheckthecontentoftherecallingdatainthesmartkey.SelecttheMainMenu‐
Browse–>Previoustoentertheoption.Ifthesmartkeydid’thaveanyoperatingorder,itwillprompt“No
operationordertoreview,ifthesmartkeyhavetherecallingdata,presstheEnterkeytoshowthecontentonthe
firstpageoftherecallrecords.PresstheDownkeytoselectthecontentsofthenextpage,presstheUpkeyto
selectthecontentofpreviouspage,andpresstheEnterkeytobrowsethecurrentlyselectedpage,asshown
below.

ItdisplaysrecallingorderSNsfromuptobottom;stepnumberthathasbeenoperatedunderaSN,totalstep
numberofoperatingorders;typeofoperatingorders;endingstatusofoperatingorder;receivingdateandtimeof
operatingorder.
17
3.2.7Function
z Synchronization
Seedetailsinthesection3.2.2Synchronization

z CheckCode
TheoptionistocheckthecodevalueorRFIDvalueofthecurrentlock.Anditisalsocapableofshowingthe
correspondingdevicename.SelecttheMainMenu‐“Function”–>“ChkCode”toentertheoption,presstheEnter
keytoreadthelockcodeorRFIDcodevalue.Thecode’sequipmentnamecanbeshownifexists.Ifthedevice
namedoesn’texist,itcanshow“ThisDevisn’texist.PresstheReturnkeytothepreviousmenu.Theinterfaceis
shownasfollows:

z Advance
Inthemainmenu,select“Function”‐>Advance”toentertheaccessibilitymenu.
Skip
Skipoperationcanbedefinedastoskiptheoption(thathasbeenforcedlyoperated)currentlydisplayedonthe
smartkeywhenthelockisabnormalandisunavailabletobeunlockedbythesmartkey,andrequiresforced
unlockingbyapprovalofthedirectorincharge,thuscontinuingthenextoperation.
18
Insertthesmartkeystepintotheskippingkey,thesmartkeybeginstoidentifytheskippingkeyandexecute
skipping.

Ifskipoperationissuccessful5secondslater,thesmartkeydisplaysasfollows:
Iffails,thekeydisplays:

Pleaseremovethesmartkeyfromtheskippingkeywhentheskippingoperationissuccessful,thesmartkeyloads
thenextoperationautomatically,andcontinuesitsoperations.
ClearOrders
Ifdoesn’twanttooperateanreceivedoperatingorderorposttheresultback,ausercanpresstheUporDownkey
toselect“Advance>“ClearOdr,andpressEnterkey,thekeywillshowthefollowinginterface:
19
Thereinto:
zPresstheEnterkeytodeletetheorder,thesmartkeywillautomaticallyreturntothemainmenu;orpressthe
Returnkeytodirectlyreturntothemainmenu,ratherthantodeletetheoperationorder.
z Deploy
Thismenuprovidesaseriesofdebuggingprogramsspecialforprofessionaltestpersonal,andsuchtestoptionsare
unavailabletofinalusersforfurthersafeandreliableoperations.
Ifauserentersthemenu,thekeywilldisplayaninterfaceforinputtingpassword,theusercanignoreit,orpress
TheReturnkeytothepreviousmenu,theoperatinginterfaceisasshownasbelow:
z Internal
Thismenuprovidesaseriesofdebuggingprogramsspecialforproductionpersonal,andsuchtestoptionsare
unavailabletofinalusersforfurthersafeandreliableoperations.
Ifauserentersthemenu,thekeywilldisplayaninterfaceforinputtingpassword,theusercanignoreit,orpress
theReturnkeytothepreviousmenu,theoperatinginterfaceisasshownasbelow:
20
3.2.8Settings
z NetWork
Thismenuprovidesadebuggingtoolsspecialforprofessionaldeploymentuser,whichisnotavailablefornormal
use.Youhavetoentertheaccesspasswordbeforeenterthesettingmenuforfurtheroperation.
z VoiceFunc
SelectSettings‐>VoiceFunctoenterthismenu,andthensetvoicerelatedoptionsbyoperatingvarious
submenus.
SetVoice
SelectVoiceFunc‐>SetVoicetoenterVoiceSettingsinterface,andpressthe“Close”buttonorthe“Open”
buttontodisenableorenablevoicesettingstate,orcheckvoicesettingstatusbysmallicons,asshownbelow:


RecSet
SelectVoiceFunc‐>RecSettoenterRecordingSettingsinterfaces,andpressthe“Close”buttonorthe“Open”
buttontodisenableorenablerecordingfunction.
21
Aftertherecordingfunctionisenabled,“record”orstopbuttonwillappearontheuserinterface,asshown
below,
Itisavailabletostartuporstoprecordingasneeded.

Recpress
SelectVoiceFunc‐>RecpresstoenterAudiocompressioninterface,andpressthe“Close”buttonorthe
“Open”buttontodisenableorenablethefunction.Afterthefunctionisenabled,thesystemwillcompressand
saverecordedaudio,thussavingmemoryspace.

RecCopy
SelectVoiceFunc‐>RecCopytoenterCopyrecordinginterface,andpressthe“Close”buttonorthe“Open”
buttontodisenableorenablethefunction.Afterthefunctionisenabled,connectsmartkeystoPCviaUSBcable,a
UdiskiconwillappearonPC,whichisreadonly,entertheUdisktocheckRECfolder,wheretherecordingfilesare
savedbydateandtime.ItisavailabletocopyandimportthemintoPC.
22
RecTest
SelectVoiceFunc‐>RecTesttoenterRecordingtestinterface,andpressthe“Close”buttonortheOpen”
buttontodisenableorenablethefunction.therecordingprocessisshownbelow:
Enterthemenu,andwaitforrecording:
Pressthe“Record”buttontostartuprecording:

Pressthe“Stop”buttontostoprecording,waitingforthenextrecordingorpressBackkeytoreturn:

23
PlayTest
SelectVoiceFunc‐>PlayTesttoenterPlayingtestinterface,andtheseaudiofilesarestoredintheRECfolder
directory;ausercanselectanaudiofilebythe“UPand“Down”buttons,andthenplayordeletesuchafile.

z Brightness
Themenufunctionsassettingbacklightbrightness,SelectSettings‐>Brightnessonthemainmenu,toenter
themenu.Pressthearrowkeystoincreaseordecreasethebacklightbrightness;presstheEnterkeytosavethe
currentbacklightbrightnesslevel.PresstheCancelkeytothepreviousmenu.
z Time
Themenufunctionsassettingtimeanddate,SelectSettings‐>Timeonthemainmenu,toenterthemenu,
asshownasbelow.
DateSetting
SelectTime‐>Datetoentertheoption,andthenmovethecursorbyoperatingtheDownbutton,andadjust
thevaluebytheUpbutton.PresstheEnterkeytoconfirmaftersettingiscompleted.
24
z TimeSetting
SelectTime‐>Timetoentertheoption,andthenmovethecursorbyoperatingtheDownbutton,and
adjustthevaluebytheUpbutton.PresstheEnterkeytoconfirmaftersettingiscompleted.
z Background
Themenufunctionsassettingthebackgroundpatternoftheuserinterface,Select“Settings‐>Background”to
enterthemenu,asshownasbelow.PresstheUporDownkeytoselectthebackgroundimage,presstheEnterkey
toset,presstheReturnkeytocanceltheoperation.Thecurrentlyavailablebackgroundsaretwooptionsasfollows
(theme2isnotavailablecurrently):
25
z Language
SelectSettings‐>Languagetoentertheoption,andtheoptionallanguagesincludeChineseandEnglish.
Chinese
SelectLanguage‐>Chinesetoenter,andpresstheEnterkeytoselecttheChinese.
English
SelectLanguage‐>Englishtoenter,andpresstheEnterkeytoselecttheEnglish.
26
3.2.9About
Enterthisoptiontocheckthesoftwareversion,modelnumberandmanufacturername.
Thereinto:
Ausercanpressthereturnkeydirectlytothemainmenuinterface.
27
Chapter4:Parametersettings
4.1AutoPoweroff
Thesmartkeywillautomaticallypoweroffifcontinuesitsstandbystatefor6minutes,Ifitisbeingchargedor
fullychargedstate,orbeingundercycleunlockingtestforelectriccontrolledlockordischargingtest,thekeywill
canceltheautopoweroff,tilltheabovestateiscanceled.
4.2Autosleepmode
Ifnobuttonispressedorthekeyisfreeofanyoperationordersorsynchronization,thesmartkeywill
automaticallyenterinsleepmode,anditsscreenwillbecomeblackandindicatorcanflashesgreenperiodically.If
anybuttonispressedorthekeystartreceivingoperationordersorsynchronization,thekeywillexittheautomatic
sleepmode,lightupthescreen,anddisplayinterface.
4.3InterfaceBrightness
Underdefaultconditions,thescreenbrightnessis6.
4.4DisplayLanguage
ThedefaultinterfacelanguageisEnglish.
4.5.Interfacethemes
Thedefaultthemeistheme1.Onlytheme1iscurrentlyavailable.
4.6Speakerstatus
Thedefaultspeakerstatusisenabled
4.7.Recordingfunction
Therecordingfunctionisdefaultedtodisenabled
4.8Audiocompression
Underdefaultconditions,thefunctionisenabled.
28
Chapter5DisplayDescriptions
Underthestandbymode,thegreenindicatorflashesevery5seconds,
Thebluebacklightlightsupunderkeyoperatingstate,
Fromstartup,runningtonormaloperation,relatedpromptsshowthecurrentstateofthekey,andpartof
promptssareshowninthefollowingtable:
PromptDescription
Hardwarefault,formatisfailed!iNandmassstoragedeviceisdamaged
Batteryerror!Thebatteryisimproperlycontractedorthe
batteryisdamaged.
Sametasknumber,cannotreceiveorderThesameoperatingorderhasexistedinthe
system,anditfailstoreceiveyournewreceiving
order
Memoryisfull,cannotreceiveorderNorflashislackofstoragespace,unavailableto
receiveoperatingorder
Withoutsync,cannotreceiveorderThekeyshouldnotreceiveoperatingorderunless
completingsynchronization
Creatoropenfileerror!filesystemisabnormal
Receivethedataerror!Erroroccursduringorderreceivingand
synchronization,thekeywillautomaticallydelete
incorrectdata.
RFIDcodeisnotsortedindescendingorderRFIDsequenceisn’tcorrectinsynchronousdata
transmissionfrommisoperationpreventionhost
tothekey
Electrified!Lockedout.Thekeydetectstheequipmentisliveandmay
causeelectricshock,promptsusersnottooperate
thedevice.
Noelectricity,pleaseoperate.Thekeydetectstheequipmentissafe,prompts
userstooperatethedevice.

Theabovecontentisonlypartofpromptmessages,whichmayvaryunderdifferentoperatingstateanddifferent
modes.Seedetailsinthethirdchapterofthismanual.
29
Chapter6ProductsMaintenance
6.1Upgrademaintenance
Ifneedtoupgradeandmaintaintheproduct,pleasecontactyourlocalservicepersonnel.
6.2Routinemaintenance
PleasereadtheoperatingmanualindetailsaswellasTroubleshootingasshowninthenextsectiontoimplement
routinemaintenance.
6.3Troubleshooting
TroublesCausesSolutions
Thesmartkeycannot
synchronize,oris
abnormalin
synchronization.
1.Batteryvoltageislow.
2.synchronization
programisincorrectly
operated.
3.Transmissionportofthe
maincontrolequipmentis
damaged.
1.Chargethesmartkey.
2.Operatethesynchronization
programcorrectly.
3.Renewthetransmissionportof
themaincontrolequipment.
Mechanicalcodinglockis
opened,butunlocking
programcannot
continue.
1.TheinternalIRDA
deviceofthesmartkeyis
damaged.
2.Unlockingstemisoffset.
1.SendthesmartkeybacktoZhuhai
UnitechPowerTechnologyCo.,Ltd.
forrepairing.
2.Readjustthehorizontalposition
orsenditbacktoourcompany.
Thesmartkeycannot
receivetheoperation
ordersentfromthe
transmissionport
1.Thesmartkeyhasan
operationorderthatisout
ofreceivingstate.
2.InternalIRDAdeviceof
thesmartkeyisdamaged.
3.IRtransmissioncoveris
blockedbadlybydirt.
4.Thetransmissionport
ofmaincontrolequipment
isdamaged.
1.Clearthesmartkey,andthen
insertthetransmissionportto
receivetheoperationorder.
2.SendthesmartkeybacktoZhuhai
UnitechPowerTechnologyCo.,Ltd.
3.SweepthedirtandcleartheIR
transmissioncover.
4.Renewthetransmissionportof
operationorder.
30
Thesmartkeyshows
“Codecorrectly,please
unlockthemechanical
lock.Butthemechanical
codinglockstillcannotbe
opened.
1.Theinternal
componentsofthelock
areunsmooth.
2.Theringisblockedby
externalcomponents.
3.Batteryvoltageislow.
4.Internalunlocking
componentsofthesmart
keydonotwork.
5.Themechanicalcoding
lockisdamaged.
1.Renewthemechanicalcoding
lock.
2.Whenunlocking,pressthe
“Unlock”key,andthenpullthelock
lightlymanually.
3.Ensurechargeadequatepower
beforeoperatingthesmartkey.
4.SendthesmartkeybacktoZhuhai
UnitechPowerTechnologyCo.,Ltd.
5.Renewthemechanicalcoding
lock.
Whenoperatingthe
breaker,thebreakercan
notbeconnected;
thoughthesmartkey
shows“Electriccoding
lockcanbeopened.
1.Internalrelayofthe
smartkeyisdamaged.
2.Thebatteryvoltageis
low.
3.Thesmartkeyisinan
improperconnectionto
theelectriccodinglock.
1.SendthesmartkeybacktoZhuhai
UnitechPowerTechnologyCo.,Ltd.
2.Ensurechargeadequatepower
beforeoperatingthesmartkey.
3.Cleartheconductivitypoleofthe
electriccodinglock,andrenewthe
electriccodinglockifnecessary.
Thesmartkeysays“The
keyhasnotsynchronized,
notpreparedfornormal
operation.
Thesmartkeydidnot
synchronizedbefore
operatingnormally.
Pleasesynchronize.
Fullychargedinacharger,
butthebatteryrunsout
inaveryshorttime.
1.Thechargerisdamaged.
2.Thebatteryhasbeen
usedforsuchalongtime
thatitcausesthebattery
aging.
3.Thedetectioncircuitfor
powerwithinthebattery
isdamaged.
1.Repairorrenewthecharger.
2.Renewthebattery.
3.SendthesmartkeybacktoZhuhai
UnitechPowerTechnologyCo.,Ltd.

Navigation menu