Zhuhai Unitech Power Technology IADAPTERL Transmission Adaptor (Zigbee) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1635314
Application ID	BKqh8/PtBb49tJVMC9Hdhw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.9kB (173718 bits)
Date Submitted	2012-02-12 00:00:00
Date Available	2012-02-12 00:00:00
Creation Date	2012-01-20 13:27:10
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-01-20 15:15:10
Document Title	Microsoft Word - Transmission Adaptor User Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	a

Document No.: TSS-iAdapterL2_FU-001
Version No.: V1.0
IADAPTERL-2_FU
TRANSMISSION ADAPTOR
USER MANUAL
Total 5 Pages
Formulated by: Mo Yiting
Audited by: Yang Shaohua
Reviewed by: Xu Yinhua
Countersigned by: Ma Jinhui
Approved by: Li Baofu
Zhuhai Unitech Power Technology Co., Ltd.
Sept. 7th, 2011
Modification Records
Date
2011.9.7
Version
V1.0
Modification
Original version
Modifier
Mo Yiting
Approver
Li Baofu
Contents
i.
ii.
iii.
iv.
v.
vi.
vii.
Introduction .............................................................................................................................. 3
Appearance ............................................................................................................................. 3
Instructions for Indicator Lamp ............................................................................................. 5
Instructions for Buzzer ........................................................................................................... 6
Instructions for Operation ...................................................................................................... 6
Technical Parameters ............................................................................................................ 7
Warning .................................................................................................................................... 8
i.
Introduction
The iAdapterL-2_FU adaptor is used in conjunctions with “UT2000IV operation order
expert system” or “JOYO-J centralized control system” , which can be communicated with
the host computer via USB and serial ports, the iAdapterL-2_FU adaptor doesn’t require
any configuration in communication via USB and serial port, but the Zigbee module needs
to be configured under the UT-NET communication mode.
The iAdapterL-2_FU adaptor is provided with two sockets for smart key, both
sockets can function as a charger, but only the right socket can be used for
communication.
Note: USB interface will be unavailable about this product.
ii.
Appearance
Front:
Back:
Install the antenna into the antenna input port as blow figure. Turn the antenna to the
vertically upward direction.
iii.
Instructions for Indicator Lamp
（1）Power Indicator Lamp: When power is normal, the green light is
normally on.
（2）Charging
Status of Charging Indicator
Off
The green light is normally on.
Status of Adaptor/Smart key
No smart key is detected by the adaptor.
The adaptor detects that the smart key is properly
placed and the charging loop is normal.
The red light is normally on.
The smart key is improperly placed and the
charging loop is abnormal.
（3）Communication
Status of Transmission Indicator
Status of Adaptor
The green light flashes one time per other 800ms
Waiting for connecting to
the key
The green light flashes rapidly.
Communicating
with
the
key
The red light flashes rapidly.
Communicating with IV host
iv.
Instructions for Buzzer
Buzzer
Indication
Beep
The charging state changes or normal prompt
tone during the communication process;
Beep… Beep… Beep…
Failure or communication error occurs during
charging process.
v.
Instructions for Operation
(1) Charge
Put the smart key in charging position when it is powered on. Then the adaptor will
charge the smart key automatically. The charging process will be indicated on the screen
of the smart key.
(2) Transmit
Communicate with Smart Key via IR:
The adapter and the host computer should be connected via USB or COM2 port
(Baud Rate: 57600bps, 8 -bit data, no parity) as shown below.
The infrared communication between the adapter and the Smart Key can be divided
into two approaches, one approach is to hold the Smart Key within the effective distance
(about 30cm) to aim at and transmit data to the adapter; another approach is to place the
Smart Key into the adaptor well and then to communicate with the Smart Key (after the
charging indicator lamp turns green).
Communicate with Smart Key via UT-NET:
The adapter and the host computer should be connected via COM1 ports (baud rate:
38400bps, 8-bit data, no parity) as shown below.
vi.
Technical Parameters
Outline Dimensions: 336×176.6×149.2mm
Input Current: Alternating Current 85~265VAC
Direct Current 110~330VDC
Charging Voltage: 5V
Charging Current: 400mA
Static Working Current: ≤200mA
Working Temperature: 0℃～45℃
Relative Humidity: 30％～95％
Environment Infrared Resistance Strength: No Less Than 0.8mW/cm2 When Wave
Length is 850～980nm
ZIGBEE Operating Frequency Range: 2420~2460 Mhz
ZIGBEE Antenna Gain: 5dbi
ZIGBEE Output Power: 18±3dBm
Mean Time between Failures (MTBF) : >50000 Hours
Insulation Resistance: >200MΩ
Antistatic Strength: ≥8000V
Dielectric Strength: AC2000V Leakage Current<10mA
IP Protection Grade: IP20
Rated Impulse Voltage: ≥2500V
Output Power: 5W
Electrostatic Discharge Immunity: Grade 4 (8000V)
Electrical Fast Transient EFT: Grade 3 (2000V)
Radio Frequency Magnetic Field Radiation Immunity: Grade 3 (10V/m)
Lightning Surge Immunity: Grade 3 (2000V)
Radio Frequency Magnetic Field Conduction Immunity: Grade 3 (10V/m)
Power Frequency Magnetic Field Immunity: Grade 5 (100A/m)
Pulsed Magnetic Field Immunity: Grade 5 (100A/m)
vii.
Warning
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with minimum
distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.、
changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Antenna Installation:
WARNING:It is installer’s responsibility to ensure that when using the authorized
antennas in the United States(or where FCC rules apply),only those antennas certified
with product are used.The use of any antenna other than those certified with the product is
expressly forbidden in accordance to FCC rules CFR47 part 15.204.The installer should
configure the output power level of antennas,according to country regulations and per
antenna type. Professional installation is required of equipment with connectors to ensure
compliance with health and safety issues.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 9
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:46764b73-925f-442f-a517-f9b62a85f688
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Create Date                     : 2012:01:20 13:27:10+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:01:20 15:15:10-08:00
Metadata Date                   : 2012:01:20 15:15:10-08:00
Document ID                     : uuid:2b13efe6-650c-424e-ad9c-62ff88f24665
Instance ID                     : uuid:20a54daa-f93b-42b7-a3eb-a63f0c2e2a48
Format                          : application/pdf
Title                           : Microsoft Word - Transmission Adaptor User Manual.doc
Creator                         : a
Author                          : a

EXIF Metadata provided by EXIF.tools