Zhuhai Unitech Power Technology WJBS7E-2HC Transmission Adaptor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2391324
Application ID	mzlZSRjf8F5JRxSbfCxTxQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	335.7kB (4196312 bits)
Date Submitted	2014-09-16 00:00:00
Date Available	2014-09-17 00:00:00
Creation Date	2014-09-09 14:14:20
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2014-09-09 14:14:20
Document Title	Microsoft Word - UM-WJBS7E_2HC JOYO 防误主机使用说明书
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mimi

Document No.: UM- WJBS7E_2HC -001
Version No.: V1.0
WJBS-7E_2HC
Transmission Adaptor
Instruction manual
Compiler:
Liang Jiawen, Yang Shaohua, Zhang Qian
Approved by:
Yang Shaohua
Reviewed by:
Li Baofu
Yu Yongqiang
Countersigned by:
Mo Yiting
Zhuhai UNITECH Power Technology Co., Ltd.
March 10, 2014
Revision History
ii
Date
Version
Summary of Revision
Revised by
Approved
by
2014-03-10
V1.0
Initial version
Yang
Shaohua
Li Baofu
Contents
CHAPTER 1 GENERAL DESCRIPTION ................................................................ 1
1.1.Overview............................................................................................................................................ 1
1.2. FCC Statement ................................................................................................................................. 1
CHAPTER 2 APPEARANCE ..................................................................................... 2
CHAPTER 3 DESCRIPTION OF INTERFACES AND INDICATORS ................ 3
3.1. Description of External Interfaces ................................................................................................. 3
3.2.Description of Indicators.................................................................................................................. 4
CHAPTER 4 INSTRUCTIONS.................................................................................. 7
4.1. Charge .............................................................................................................................................. 7
4.2. Data Transmission ........................................................................................................................... 7
4.3. GUI Display and Operations .......................................................................................................... 7
Chapter 1 General Description
1.1. Overview
The WJBS-7E_2HC Transmission Adaptor can be configured with some slave machines flexibly (one host machine
supports up to five slave machines), and the handheld devices supported by each slave machine can be
independently configured to meet different requirements on site. Between the WJBS-7E_2HC Transmission Adaptor
and the upper computer, multiple communication interfaces are supported, including: serial, USB (2.0 full speed),
and Ethernet (supporting simultaneous communication of up to four ports). Between the WJBS-7E_2HC
Transmission Adaptor and a handheld device, the infrared communication interface (IrDA) is supported. The
JBS-7E_2HC Transmission Adaptor uses a TFT 65,536 Color LCD and a 4-button simple style, the man-machine
interface is friendly and easy to operate, and it displays an accurate calendar.
1.2. FCC Caution
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Chapter 2 Appearance
Front view:
The buttons on the host machine are described as follows:
1
No.
Button Definition
Function
ESC
Exit
Select (left)
Select (right)
Enter
Confirm
Chapter 3 Description of Interfaces and Indicators
3.1. Description of External Interfaces
The rear view of the host machine is as shown below:
1
No.
Function
OFF/ON power switch
External power supply interface
USB interface
RS232 interface
Ethernet interface
3.2. Description of Indicators
The indicators on the host machine panel are described as follows:
1
No.
Indicator Definition
RUN
HOST
SLAVE
Function
It quickly flashes twice every 3 seconds: This
indicates that the host machine is in BOOT status
(for software upgrade and factory configuration).
It quickly flashes once every 3 seconds: This
indicates that the host machine is in APP status
(normal operation status).
The red light flashes: This indicates that the host
machine is receiving data from the upper computer.
The green light flashes: This indicates that the host
machine is sending data to the upper computer.
The red light flashes: This indicates that the host
machine is receiving data from a slave machine.
The green light flashes: This indicates that the host
machine is sending data to a slave machine.
The indicators on a slave machine are described as follows:
3
No.
Indicator Definition
Function
It quickly flashes three times every 3 seconds: This
indicates that the slave machine is in BOOT status
(for software upgrade only).
RUN
It quickly flashes once every 1 second: This indicates
that the slave machine is in APP status (normal
operation status).
The light is off: This indicates that there is no
handheld device in the slave machine.
CHG
The red light is always on: This indicates that the
handheld device in the slave machine is placed
incorrectly.
The green light is always on: This indicates that the
handheld device in the slave machine is placed
properly.
The red light flashes: This indicates that the slave
machine is receiving data from the host machine.
COMM
The green light flashes: This indicates that the slave
machine is sending data to the host machine.
Chapter 4 Instructions
4.1. Charge
After the WJBS-7E_2HC Transmission Adaptor is connected to the power supply, a Smart Key can be placed in a
holder of a slave machine for automatic charging. The charging progress can be seen from the display of the Smart
Key.
4.2. Data Transmission
The WJBS-7E_2HC Transmission Adaptor is connected to the upper computer through RS232, USB, or Ethernet,
and transfers the data of the upper computer to the Smart Key through the infrared interface at the bottom of the
slave machine.
4.3. GUI Display and Operations
(Standby Interface)
After the WJBS-7E_2HC Transmission Adaptor is powered on or enters the idle status, the standby interface is
displayed, to enter the main menu interface, press all the four buttons simultaneously in standby status.
4.3.1 View the software version:
After the adapter is powered on and enters normal operation mode, select "Help"→"Version", as shown below:
(View the version information of the host machine's main program and BOOT program)
(View the version information of the slave machine's main program and BOOT program)
4.3.2 A prompt is cyclically displayed when the key is placed incorrectly:
When the key is placed incorrectly, the buzzer generates a warning every 30 seconds, and the prompt "Please place
the front (rear) key correctly" is displayed cyclically on the host machine's LCD.
(Cyclically displayed prompt "Please place the front key correctly")
4.3.3 NIC configuration:
(Note: After the NIC configuration is modified, you need to restart the machine to make the new configuration
valid.)
(Configure NIC basic parameters and four ports)
(Configure the local parameters, pressing Left/Right for selection and pressing Enter for revision)
(Configure the port parameters, pressing Left/Right for selection and pressing Enter for revision)
No.
Configuration
Option
Function
Port number
Port number of the adapter
Destination port
Port number of the upper computer
Destination IP
IP address of the upper computer
4.3.4 Set the system time:
10
(Set the system time of the machine, pressing Left/Right for selection, pressing Enter for revision, and pressing ESC
for saving and exiting)
4.3.5 Set the brightness of the backlight:
(Set the brightness of the backlight, pressing Left/Right for adjustment (range: 1-8) and pressing Enter or ESC for
saving and exiting)
4.3.6 Change the background:
11
(Set the background, pressing Left/Right for selection and pressing Enter or ESC for saving and exiting)
4.3.7
Set the language:
(Set the language, pressing Left/Right for selection and pressing Enter or ESC for saving and exiting)
4.3.8 Communication interface:
The WJBS-7E_2HC Transmission Adaptor supports simultaneous communication of up to four slave machines, if
more than 4 slave machines communicate simultaneously, the last slave machine shall wait until the previous one
ends communication.
The buttons become invalid during communication. Simultaneous communication of four slave machines is as
shown below:
12
(The WJBS-7E_2HC Transmission Adaptor supports simultaneous communication of up to four slave machines)
4.3.9 Main Interface:
Description of main interface icons
●
Description of Ethernet state icon (Take port 0 as an example, the icon is the same for the other ports.)
This icon cyclically displays the current status of each of the four Ethernet ports, the icon for each status is
described as follows:
No.
Icon
Function
13
●
The port is not enabled.
The TCP connection of the port is disconnected.
The port is in transition status, and does not respond to TCP
connection requests.
The port is in Server mode and listening to the Client end,
in this case, it can respond to TCP connection requests.
The TCP connection of the port is established successfully,
and data transmission is ready.
The port is in UDP status, and data transmission is ready.
Description of USB connection status icon
This icon indicates the physical connection status of the internal circuit of the USB port at the back of the host
machine, the icon for each status is described as follows:
No.
Icon
Function
The internal USB circuit is connected to the host machine.
The internal USB circuit is connected to the handheld
device in slave machine 1, that means, this handheld device
is directly connected to the computer through a USB cable.
The internal USB circuit is connected to the handheld
device in slave machine 2, that means, this handheld device
is directly connected to the computer through a USB cable.
The internal USB circuit is connected to the handheld
device in slave machine 3, that means, this handheld device
is directly connected to the computer through a USB cable.
The internal USB circuit is connected to the handheld
device in slave machine 4, that means, this handheld device
is directly connected to the computer through a USB cable.
14
6
The internal USB circuit is connected to the handheld
device in slave machine 5, that means, this handheld device
is directly connected to the computer through a USB cable.
(No icon) The internal USB circuit is disconnected.
15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : mimi
Create Date                     : 2014:09:09 14:14:20+08:00
Modify Date                     : 2014:09:09 14:14:20+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - UM-WJBS7E_2HC JOYO 防误主机使用说明书
Creator                         : mimi
Document ID                     : uuid:acfeee3f-4a67-4ee8-a6fc-79bcfea49651
Instance ID                     : uuid:2c81c191-67cc-44d9-9226-ad9533e8538c
Page Count                      : 19

EXIF Metadata provided by EXIF.tools