Zhuochuang Vision Technology ZC-IPC208 Low-power Battery Camera User Manual
Shenzhen zhuochuang Vision Technology Co. Ltd. Low-power Battery Camera
Users manual
Low-power Battery Camera
ZC-IPC208 USER MANUAL
1 .Function .......................................... 2
2. APP software download .................. 2
3. Installation ...................................... 3
4. Administrator operation guide ....... 6
5.Main function description ................ 6
6.Trouble shooting .............................. 8
7. Precautions Use occasions: ............. 9
8. FCC Warning ................................. 10
1 .Function
Point-to-point connection, can work without a network connection.
This product is a 25-frame HD (1,080P) network camera with an
external TF card and a multi-functional high-tech product
integrating functions of video recording, photographing, APP
real-time monitoring, and storage. It has a function of 5 megapixel
HD recording, and supports up to 32GB TF card, long-time work
and APP operation, which makes it more convenient. Moreover, it
works as the best anti-theft and evidence-gathering tool with strong
concealment.
2. APP software download
Method 1: Scan the QR (picture 1) code directly to go to the
download screen. Select appropriate download software according
to your mobile phone system. (Note: This kind of installation is only
available for Chinese Mainland).
Method 2: For Android phones, search for APP software named
"RMON" in Google Play, download and install it. For IPhone, APP
software named "RMON" in AppStore, download and install it.
3. Installation
1). Plug in the charger, connect the power supply, and turn on the
ON/OFF switch of the device. (The device starts up 30 seconds
later and the blue light keeps on while the red light flashes quickly).
2). Flashes quickly for 30 seconds, it means the device is searching
for wifi that is connected before. (In this mode, the device will
automatically connect to the network that is connected before after
the device is power off).
3). If there is no wifi found after searching, the device will restart
automatically (it takes 30 seconds). After restart, the blue light
keeps on while the red light flashes slowly. (In this mode, the
device is transmitting wifi hotspot for search connection of your
mobile phone).
4). When the red indicator light flashes slowly (2 minutes after
starting up), use your mobile phone to search for wifi hotspot (begin
with YM) for connection and exit. After that, enter in the
downloaded APP and set the configuration of router network.
(Specific operation steps are shown as below).
5). Wifi connection 1 (for iphone) :
- Search for wifi hotspot for connection
- Open the APP when a wifi icon appears
- Click to add it.
5). Select a path to add;
6). Enter in or scan the UID code of QR code of the device. 6.
Select or enter in the name and passwords of wifi before setting
configuration.
7). Search
8). Confirm
9). Done
10). When it says “Wifi configuration completed”, the device will
restart again. Both the blue and red indicator light will keep on for
30 seconds after the device starts up (It means the device is
connected to network when the red indicator light keeps on).
11). App is ready to add and search for camera by now (under the
same network environment).
12). Point-to-point connection (without network connection)
13). Search for wifi hotspot for connection on mobile phone-open
APP-click -select -search-confirm-connection completed (the blue
light keeps on while the red light flashes slowly)
14). Connection method 2 (point-to-point connection to router
network)
15). Search for wifi hotspot for connection on mobile phone-open
APP-click -select -search-confirm-connection completed-click to set
the camera-select advance configuration-select wifi
connection-select a wifi-enter in passwords-connect (30 seconds
after the camera restarts automatically, both the blue and red
indicator light for camera connection will keep on)
16). Lamp opening and talkback.
17). Click to remotely turn on the illumination lamp, and drag to
adjust the brightness.
18). Click to remotely turn on the night vision lamp. , and then press
to talk, and voice will 3. Click the microphone be automatically sent
to the device side after release.
19). Screen shot, video recording and alarm 1. Click the online
device to browse videos. There are three options “1080P 720P
480P” on the top of screen, which can be selected according to the
current network environment to adjust the image quality and video
fluency. In addition to that, the color contrast degree and brightness
can also be adjusted autonomously. Icons in respectively represent:
monitor, photograph, video recording, left/right rollover, up/down
rollover. By clicking “photograph” or “video recording” , the images
or videos will be saved in the phone memory (as shown below).
20). Long press the online device to start more settings.
21). Advanced configuration (to remotely change basic functions of
the device)
22). Select , enter in the original passwords 8888 and then new
passwords to change the passwords.
4. Administrator operation guide
1). Install the search tool on the computer. within LAN). in random
disc (Note: Administrator setting can only be made
2). Click to display the devices connected to network (as below)
3). Double click the searched IP. Enter in the next page to type in
user name (admin) and click to confirm it. (Note: The original user
name is admin, with no password) (as shown below)
4). Enter in setting page after completing the above steps.
Download the plug-in and select a language for first use (click
download and install) (as shown below). to
5). Click setting page (as shown below). again to enter in 5. Click to
start setting (as shown below)
6). System management setting: to select the item to be set (as
shown below).
5.Main function description
1). Time setting Open system management page——click time
setting——select time zone——save.
2). Administrator password setting Open “change
password”——type in the new password——confirm
the new password——save.
3). Change the password of device (original password: 8888) Open
“ network setting ” —— P2P setting —— type in the new password
—— save —— return to system management to restart the device.
(it can also be set remotely by APP).
4). Alarm setting Open “alarm setting” ——start alarm
setting——click IP Camera built-in — — select the required
sensitivity. (Option 6 is suggested)
5). SD card setting SD card should be formatted for the first time to
insert — —enter in SD card setting to select the needed function
before setting other functions. (Note: The device defaults to
automatically and circularly record videos).
6). View the content of SD card
-Plug out the card directly and read with a card reader.
-Remote playback on APP.
- Open SD card video recording page, select and save the video file
to be viewed. 10. Specifications Pixel Resolution Video format
Frames 500 megapixel CMOS 1080P AVI 25
View angle Eyesafe lamp beads Distance of detection shooting
Minimum illumination Charger 140° 23 motion 6 m straight-line
distance 1LUX 2A Continuous shooting time Above 24 hours
Compressed format Sound recording range Power consumption
Storage temperature Operating temperature Operating humidity
Type of memory card Maximum capacity memory card Play
software Computer VLCPlayer/SMPlayer operation Windows/Mac
OS X H.264 5 ㎡ 260MA/5V -20-80℃ -10-60℃ 15-85%RH TF
card of 32GB system Mobile phone operation Android/iOS system
Web browser IE7 and above,chrome,firefox safari.etc Maximum
visit
6.Trouble shooting
1). Remote control is not enough. Please select the most suitable
definition according to the current network environment.
2). SD card cannot save files. SD must be formatted for first use.
3). The device cannot be connected to network. Long press the
reset key for 4 seconds and connect it again.
4). The video in SD card cannot be played fluently on APP. It is due
to different decoding capacity of mobile phones. You can adjust the
definition of recording device to fit your mobile phone.
5). The passwords are forgotten. Directly click the reset key of
device for 4 seconds to restore factory settings.
6). In case the indicator light does not work normally or connection
is not smooth after long time use, please restore the factory default
setting (press the reset key for above 4 seconds) and connect it
again.
7. Precautions Use occasions:
please strictly comply with relevant state decrees and do not use it
for any other illegal purposes at your own risks. Software upgrade:
to achieve better product performance, the manufacturer will make
continuous improvement to the software. This product is designed
for convenient software upgrade by customers. Please ask your
local distributor for the information and upgrading method of latest
version of software. Working temperature: please use it under
natural temperature. Do not operate it under a temperature that is
not adapted for human body. Working humidity: please use it under
an environmental humidity that is suitable for human life. Do not put
the product in a moist working environment since the product is not
designed with waterproof function. Shooting luminance: please use
the product in an environment with adequate light sources. Do not
point the camera directly to the sun and other superstring light
sources to avoid any damage to the optical elements. Cleaning
requirements: please do not use the product in an environment with
too much dust to keep the camera lens and other components free
of dust that may affect the shooting effect. The camera lens can be
cleaned and maintained by wiping with lens wiping paper or
glasses cloth. Other matters: the product is a kind of precision
electronic product that should be kept safe from strong impact and
vibration. Please do not use in high magnetic field and strong
electric field.
8. FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
Note 1: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
1.Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment.
2. The minimum separation generally be used is at least 20 cm.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
.