86584UK BW_HBE6_UK_05 12;v1.00 Hydroboil Plus Electronic Small 3 7l HP003 HP103 HP005 HP105 HP007 HP107 User And Installation Instructions V1.00
2016-08-19
: Zip Water Hydroboil Plus Electronic Small 3-7L Hp003 Hp103 Hp005 Hp105 Hp007 Hp107 User And Installation Instructions 86584Uk V1.00 Hydroboil_Plus_Electronic_Small_3-7l_HP003_HP103_HP005_HP105_HP007_HP107_User_And_Installation_Instructions_86584UK_v1.00 zipwater_ Instruction Manuals zipwater.onwallboiling zipwater.uk.products zipwater.uk
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
Installation and Operating Instructions ® Zip Hydroboil Plus Instant boiling water 203562 Zip Hydroboil Plus 3 Litre White 203561 Zip Hydroboil Plus 3 Litre Stainless Steel HP003 HP103 205562 Zip Hydroboil Plus 5 Litre White 205561 Zip Hydroboil Plus 5 Litre Stainless Steel HP005 HP105 207562 Zip Hydroboil Plus 7.5 Litre White 207561 Zip Hydroboil Plus 7.5 Litre Stainless Steel HP007 HP107 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Page 1 of 16 This page intentionally left blank Page 2 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Contents Read these warnings first . . . . . . . . . . . . . . . 4 Installation Requirements . . . . . . . . . . . . . . . 4 Installation Procedures . . . . . . . . . . . . . . . . . 5; 6 Step 1 – Positioning . . . . . . . . . . . . . . . 5 Step 2 – Fastening . . . . . . . . . . . . . . . . 5 Step 3 – Connecting . . . . . . . . . . . . . . . 6 a) Plumbing. . . . . . . . . . . . . . . . 6 b) Venting . . . . . . . . . . . . . . . . . 6 c ) Electrical . . . . . . . . . . . . . . . . 6 Step 4 – Assembling . . . . . . . . . . . . . . . 6 Step 5 – Commissioning . . . . . . . . . . . 6 Wall Mounting Template Dimensions . . . . . . 7 End of life disposal . . . . . . . . . . . . . . . . . . . . 7 Problem Solving. . . . . . . . . . . . . . . . . . . . . . . 8 Earthing Continuity Verification . . . . . . . . . . . 8 Tap Operating Procedures . . . . . . . . . . . . . . . 9 Operational Procedure Settings . . . . . . . . . . . 10 Default Settings . . . . . . . . . . . . . . . . . . . . . . . 11 Setting Operational Modes. . . . . . . . . . . . . . . 11 Normal Mode. . . . . . . . . . . . . . . . . . . . . . . . . 11 Configurational mode. . . . . . . . . . . . . . . . . . . 12,13 Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . 14; 15 Warranty and Contact Details . . . . . . . . . . . . 16 Note: Read all instructions and precautions before proceeding. This unit must be installed in accordance with water supply by-laws and relevant local authority by-laws. All plumbing and electrical installations must comply with local authority requirements. Page 3 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Read These Warnings First Please read all installation requirements, installation procedures and precautions before installing any Zip Hydroboil Plus instant boiling water heater. Never attempt to install any Zip Hydroboil Plus instant boiling water heater without reading all of the applicable instructions. In some hard water areas where mineral scale accumulation in the boiling chamber of the Zip Hydroboil Plus may become a problem, consideration should be given to the maintenance required. A suitable form of water treatment may be necessary. All plumbing connections must be made in accordance with local regulations. The Zip Hydroboil Plus instant boiling water heater is not intended for use by young children or infirm people without supervision. Young children should be prevented from having access to ensure that they are not able to use or play with the heater. If the installation site is located more than 1000 metres above sea level, the installer should contact a Zip authorised agent for high altitude settings. This appliance must be earthed. If the power supply cord is damaged it must be replaced by a Zip authorised agent or a qualified electrician. Do not remove the cover of the heater under any circumstances without first isolating the heater from the power supply. Do not use strong, corrosive or abrasive cleaners to clean the case of the heater. Frost protection: If this heater is located where ambient air temperature could fall below 5ºC when the heater is not in use, do not turn off the appliance electrically. This safeguard does not offer the same protection to the connecting pipework and fittings. The ambient temperatures this unit must operate within is 5ºC - 50ºC. This heater is intended only for indoor use and should never be installed outdoors or be exposed to the elements of nature. This unit must not be positioned in an area that may be cleaned by a water jet. This unit must not be cleaned by a water jet. Installation Requirements Before installing, ensure that the following are available: a) Sufficient space to position the heater so there is at least 150 mm clearance above the heater for service access, 65 mm to its left and 20 mm to its right – the tap outlet usually should be positioned at least 200 mm above a draining board or drip tray. b) Standard local requirement power cable positioned as shown on the paper mounting template for connection from the rear of the heater to the terminal block within the heater, this will require an isolating switch fitted in the fixed wiring and attached to a secure surface. This switch must provide all pole disconnection and a contact separation of at least 3mm installed in accordance with the wiring rules. Alternatively a standard 220-240V, 13 amp fused spur, within 1500 mm of the Hydroboil Plus Unit. NOTE: When installed with a plug and cord the plug must be accessible c) Cold water supply with a minimum working pressure of 0.7 bar and a maximum working pressure of 7 bar connected via an isolation valve. Page 4 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Installation Requirements (continued) d) Outlet drainage to a sink draining board or to a drip tray. e) Access to drainage from a vent situated at the base of the heater. f) In all installation instances the walls of the heater must be vertical and the base horizontal, there can be no exceptions to this rule. Note: If the water pressure is likely to exceed 7 bar, a 3.5 bar pressure reducing valve must be installed in the cold water supply line. Installation procedure Before You Begin VENT OUTLET COLD INLET Locate the paper mounting-hole template packed with the heater. Read the installation and operating instructions completely. Decide whether to install with concealed or exposed plumbing and/or electrical connections. Concealed connections are preferred for superior appearance. Step 1 – Positioning INLET POSITION VENT POSITION Position the heater so the tap will drain on to a draining board or drip tray. Position the base of the tap to be not less than 200 mm above the draining board (height should be increased only if essential for filling larger vessels). Provide clearance for service access of not less than 150 mm top, 65 mm left, 20 mm right. Mark corner positions for the heater on the wall so as to position the paper mounting-hole template. Step 2 – Fastening 45mm Position mounting-hole template on wall and drill holes where shown. Drill holes for water inlet, vent outlet and wiring if rear access is intended. Remove cover fastening screws from heater and lift whole cover off heater. Install plumbing and wiring and prepare pipe ends and wiring ends as shown. Screw heater chassis to the wall using screws or bolts suited to the wall. Elbow Spout detail Page 5 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Installation Procedures (continued) Screws or bolts must be able to support the weight as shown in the chart on the left. Aprox weight when filled Step 3 – Connecting 3.0 Litre models 12.5 kg 5.0 Litre models 16.5 kg 7.5 Litre models 20.5 kg a) Plumbing For exposed plumbing connection, connect the cold water inlet pipe from the base of the heater directly to the 15 mm or half-inch compression fittings with the nuts and olives provided. For concealed plumbing connections, connect the cold water pipe through the rear of the chassis using a 15 mm or half-inch capillary elbow. 250mm Wring 45 mm Concealed Vent Concealed Inlet Cold water pipes must be flushed before connection to the inlet. Any clogging due to sediment or fines will adversely affect the operation of the heater. The heater must be installed with an isolating valve which allows it to be isolated from the mains supply for servicing. Water pressure requirements: Minimum - 0.7 bar, maximum - 7 bar. Warning: If pressure is likely to exceed 7 bar, a pressure limiting valve must be installed in the cold water supply line. Zip recommends a valve rated at 3.5 bar for this application. b) Venting A vent at the base of the heater must be plumbed to a safe visible location as, under certain conditions, it may discharge cold or boiling water and/or steam. For exposed vent plumbing, connect vent outlet from the base of heater to a 15 mm or half inch OD pipe which has a continuous fall, is no more than 3 metres long, has no more than 3 right angle bends, and discharges to a waste water drain. Vent line Visible Tundish For concealed vent plumbing, direct the vent outlet from the heater rear, using a visible tundish. (see diag at left) c) Electrical For concealed electrical connection, connect a power cable through the rear access opening of the heater to the terminal block within the heater as shown. For exposed electrical connection, connect the flex to a fused spur on the wall within 1500 mm of the heater that will adequately cater for the units power needs. Special Note Ensure the silicon outlet tube is correctly positioned within the outlet nozzle. Failure to do this may cause internal flooding. Do not turn the power ON until the heater is filled to the tap level, with water. Step 4 – Assembling Place the heater case back on to the heater and secure the top 2 case screws. Secure two bottom case screws. Step 5 – Commissioning Inlet water temperature 3.0 Litre models 5.0 Litre models 7.5 Litre models Page 6 of 16 15°C 16 min 16 min 23 min 10°C 17 min 17 min 24 min Check previous steps. Turn water supply ON. Water is now flowing into heater, check connections for leaks. Wait approximately 5 minutes and check outlet tap for water. This is achieved by pressing the tap paddle. Power is only to be turned on when water is available from this outlet. Turn power ON. After a short period, boiling water will be available and will be maintained close to boiling point thereafter. Initial heating periods are shown in the table on the left. Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Wall Mounting Template Dimensions 274 (1.5 L & 3.O L) 38 (1.5 L & 3.O L) 304 (5.0 L & 7.5 L) 53 (5.0 L & 7.5 L) 19 150 CLEAR 65 CLEAR 416 3.O L 448 5.O L 561 7.5 L 56 POSITIONING PIN COLD INLET VENT EXTERNAL PLUMBING ELECTRICAL WIRING POSITION 72 INTERNAL PLUMBING 15 25 35 20 42 BENCH TOP End of life Disposal In order to help preserve our environment we ask that you dispose of this product correctly. Please contact Zip customer services for advice on 0845 602 4533 Page 7 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Problem Solving Sympton Possible Cause Solution Fails to dispense water. Water isolating valve turned off. Blocked filter, blocked meter tube, blocked strainer, jammed ball valve assy, airlock in transfer tube. Check water supply valve. Contact Zip authorised agent. No power. Water not boiling. Runs out of boiling water and fails to refill. Outlet tap drips. Overflow from vent. Excessive steam from vent. Power “on” but no heat. Overload repeatedly tripping with excessive steam. Overload repeatedly tripping without excessive steam. Check power supply. Faulty PCB, faulty NTC, faulty element, faulty cutout. Contact Zip authorised agent. Internal adjustment. Contact Zip authorised agent. Earthing Continuity Verification If required, an earth continuity test can be performed by testing between the earth pin on the products lead and a exposed piece of metal on the case. Warning: this appliance must be earthed. Following remedial service the earthing continuity of the heater must be checked by a qualified technician using an appliance tester, or continuity tester of accuracy Class 5 or better. Class 5 denotes an accuracy of 5% full scale deflection. 1. Isolate power supply. 2. Set meter to 0 ohm with leads connected together. 3. Connect one test lead to the earth pin on the three pin plug. 4. Connect the other test lead to a bare patch of metal (preferably on the edge) of the top of the cover, then to the front cover of the unit. Warning- the water may be boiling - show extra care. 5. Test that in every instance the electrical resistance does not exceed 1 ohm. Page 8 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Operating Procedures Tap Operation Safety feature. Zip Hydroboil Plus has a unique safety device designed to reduce the incidence of accidental operation of the tap.The tap can be “Locked” to prevent the Hydroboil Plus from dispensing hot water In order to “lock” the tap, ensure the safety button is protruding from the right hand side of the control panel and the locked indicator is illuminated This can be achieved by pressing the button and simultaneously rotating it until the groove in the head of the button faces toward the body of the appliance. In this position an internal spring will push the button out. Once the button is in the extended position, the tap will be “Locked” and unable to dispense hot water. Disengage safety feature. Press and simultaneously rotate (aprox 90 degrees) the safety button on the right hand side of the control panel, until it latches in the closed position, and the unlocked indicator is illuminated. Warning: The unit is now capable of dispensing boiling water without the safety feature. Dispensing Boiling water: Zip Hydroboil Plus is fitted with a safety, two-way cool-touch safety tap for instant boiling water. Normal operation (for filling cups and small containers) To activate the tap, press the safety button on the right side of the control panel and while holding the button in, gently push the lower end of the tap paddle inwards and boiling water will flow until the tap paddle is released. Continuous operation (for filling, tea pots, saucepans and large containers ) Press the safety button on the right side of the control panel and while holding the button in, Lift the tap paddle until it locks into a horizontal position, the button can now be released and boiling water will flow until the paddle is returned to its normal vertical position. This operation allows a vessel to be filled without holding your hand where it may be affected by steam. Locked / unlocked indicators locke d Press to unl ock Press Continuous operation to unl Normal operation Page 9 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 ock Operating Procedures (setting the controls) DESCRIPTION The Electronic Hydroboil Plus has user interface that consists of a graphic LCD and 4 Capacitive Sensor Switches, (CSS). The user interface gives the current status of the Hydroboil Plus and allows the user to configure it as required. Legend: The user interface is shown below. 1 = ZIP Symbol 2 = Day of the Week indicator 3 3 = Setpoint Value 4 5 6 2 4 = CHANGE FILTER indicator 5 = ON indicator 6 = OFF indicator 7 = Sleep Symbol 8 = Sleep mode ( Stand by ) indicator 1 9 = Low light Symbol SUN MON TUE WED THU FRI SAT CHANGE FILTER SETPOINT C ON OFF 7 8 BOILING WATER zZ Z 10 = 24hour Clock 11 = BOILING WATER indicator 11 CSS1 = Capacitive Sensor Switch 1 10 9 CSS2 = Capacitive Sensor Switch 2 CSS3 = Capacitive Sensor Switch 3 CSS1 CSS2 CSS3 CSS4 CSS4 = Capacitive Sensor Switch 4 The LCD and capacitive sensor switches connect to the Controller PCB via a 4-way serial cable. The DIP Switches on the Controller PCB should be configured as follows. The Electronic Hydroboil Plus has a real time clock that operates in 24 hour mode, and can have 2 ON-OFF times per day. If the user selects either of the energy saver modes, (see below), ON-OFF mode cannot be used, (The user is not able to access this part of the configuration). The real time clock is battery backed meaning the unit does not loose the configuration data if power is removed. The Hydroboil Plus has two energy saver ( stand by ) modes that can be used in an either/or configuration. The energy saver modes differ from on/off mode in that the water in the tank is maintained at 65ºC rather than allowing it to drift back to ambient. 1) Sleep Mode, and 2) Low Light Mode. (Sleep-when-it’s-dark feature) Sleep Mode can be set to 2 hours or 4 hours. Sleep Mode is indicated by the Sleep symbol on the LCD. Low Light Mode is indicated by the Low Light symbol on the LCD. When the unit actually enters energy saver mode it is indicated by the Sleep Mode Indicator on the LCD. Page 10 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Default settings In 2 Hour Sleep Mode, if there has been no water drawn through the tap or no touches of the capacitive switch sensors for two hours, the temperature of the water in the tank will be allowed to drop to and be maintained at 65ºC. (The time taken for the water temperature to drop to 65ºC can be as much as 12 hours depending on ambient conditions and other external factors). In 4 Hour Sleep Mode, if there has been no water drawn through the tap or no touches of the capacitive switch sensors for four hours, the temperature of the water in the tank will be allowed to drop to and be maintained at 65ºC. As soon as water is drawn through the tap, or there is a touch on the capacitive switch sensors, the Hydroboil Plus returns to full power mode. In Low Light Mode, as soon as the ambient light (in the room where the Hydroboil Plus is installed ) drops below 100lux, the unit goes into energy saver mode and will allow the temperature of the stored water to drop to and be maintained at 65ºC. As soon as the ambient light rises above 100lux, the Hydroboil Plus returns to full power mode. A normal office has an ambient light level of 200-300lux. The Default configuration for the Hydroboil Plus is as follows. tting operational modes TEMPERATURE SETPOINT: FILTER TIMER: SLEEP MODE: LOW LIGHT MODE: SUN ON TIME 1: --:-SUN OFF TIME 1: --:-SUN ON TIME 2: --:-SUN OFF TIME 2: --:-MON ON TIME 1: 08:00 MON OFF TIME 1: --:-MON ON TIME 2: --:-MON OFF TIME 2: --:-TUE ON TIME 1: --:-TUE OFF TIME 1: --:-TUE ON TIME 2: --:-TUE OFF TIME 2: --:-- 98ºC OFF OFF OFF WED ON TIME 1: WED OFF TIME 1: WED ON TIME 2: WED OFF TIME 2: THU ON TIME 1: THU OFF TIME 1: THU ON TIME 2: THU OFF TIME 2: FRI ON TIME 1: FRI OFF TIME 1: FRI ON TIME 2: FRI OFF TIME 2: SAT ON TIME 1: SAT OFF TIME 1: SAT ON TIME 2: SAT OFF TIME 2: --:---:---:---:---:---:---:---:---:---:---:---:---:---:---:---:-- Setting operational modes The Hydroboil Plus has 2 modes of operation: 1).Normal operation mode 2). Configuration mode Normal mode Normal display In Normal operation mode the LCD will display as follows: Note: The BOILING WATER symbol is not displayed until the water reaches temperature. Page 11 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Configuration mode To enter Configuration Mode, press and hold the CSS1 and CSS4 for 10 seconds. The unit enters Configuration Mode and the user can configure the clock as follows. SET SETPOINT Setpoint display To return to Normal Mode, press CSS4. To increment the setpoint, press either CSS2 or CSS3. To step to the next configuration parameter, press CSS1. Note 1: The setpoint moves in a circular fashion. It goes from 98 to 99 to 100 to 65 to 66 etc. Note 2: 100ºC may be indicated by 1H or 100 on the LCD SET CLOCK Clock display To return to Normal Mode, press CSS4. To increment the Hours, press CSS2. To increment the Minutes, press CSS3. To step to the next configuration parameter, press CSS1. SET DAY-OF-THE-WEEK Day display To return to Normal Mode, press CSS4. To step to the next day of the week, press either CSS2 or CSS3. To step to the next configuration parameter, press CSS1. SET FILTER EXPIRATION TIME To return to Normal Operation, press CSS4. Filter display To increment the expiration time, press either CSS2 or CSS3. To step to the next configuration parameter, press CSS1. Note 1: The Filter expiration time moves in a circular fashion. It goes from OFF to 00 to 01 to 02 etc, etc. up to 14 Months. Note 2: 00 is a test mode. When the user returns to Normal Operation, the CHANGE FILTER icon will appear on the LCD after approximately 1minute. To clear the CHANGE FILTER icon, the user must re-enter Configuration, set the Filter Expiration Time to OFF and return to Normal Operation. perational Page 12 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Configuration mode (continued) modes CONFIGURE SLEEP MODE Sleep display To return to Normal Mode, press CSS4. To configure sleep mode to kick in after 4 hours, press either CSS2 or CSS3. To step to the next configuration parameter, press CSS1. Note: Configuring Sleep Mode moves in a circular fashion. It goes from 2 hours to 4 hours to OFF and back to 2 hours etc. ENABLE LOW LIGHT SENSOR “Sleep-when-it’s-dark” feature. Low light display To return to Normal Operation, press CSS4. To configure Low Light Sensor ON/OFF, press either CSS2 or CSS3. To step to the next configuration parameter, press CSS1. Note 1: Daylight Sensor ON/OFF flip flops with each press of CSS2 or CSS3. Note 2: If either Sleep Mode or Low Light sensor is configured as on, pressing CSS1 will return the user to Normal Operation. Note 3: If both Sleep Mode and Low Light sensor is configured as off, the user will be able to use ON-OFF mode. Sun on-time display SUN ON-TIME 1 To return to Normal Mode, press CSS4. To increment the hour for SUN ON-TIME 1, press either CSS2 or CSS3. To step to the next configuration parameter, press CSS1. SUN OFF-TIME 1 Sun off-time display To return to Normal Mode, press CSS4. To increment the hour for SUN OFF-TIME1, press either CSS2 or CSS3. To step to the next configuration parameter, press CSS1. Note: If ON TIME = OFF TIME this disables the timer. Note: The same procedure is followed for all the ON-OFF time periods. If no action is sensed on the CSS’s for 20 seconds, the unit will revert to Normal Mode. After SAT OFF-TIME 2 pressing either CSS1 or CSS4 will revert the unit to Normal Mode. Page 13 of 16 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Spare Parts Page 14 of 16 Item Kit No. Description 1 90487 Cistern Lid Clamp Kit 2 90488 Cistern Lid and Gasket Kit 3 90490 Gasket Kit Hydroboil 4 90083 Float Valve Kit with Float 5 90069 Jumper Valve Kit with Seals 6 90102 Cistern Float Kit with Nut and Screw 7 90493 Metering Tube Kit 1500W 7 90494 Metering Tube Kit 2400W 8 90495 Banjo Screw Hydroboil 9 90496 O-Ring Kit Hydroboil 10 90743 Fascia Lens Kit 11 90741 Fascia Assy Electronic White 11 90742 Fascia Assy Electronic Grey 12 90620 Sensor Probe Econoboil Hot Tank Kit 13 90579 Overload Kit 14 90732 Tap Handle Kit 15 90733 Outlet Nozzle Kit 16 90503 Strap and Key Kit 3Litre Hydroboil 16 90504 Strap and Key Kit 5L& 7.5Litre Hydroboil 17 90505 Tap Nut Kit 18 90509 Tap Body Kit 19 90485 Element Kit 1500W / 240V 19 90486 Element Kit 2400W / 240V 20 90491 Cleaning Hole Cover Kit 21 90492 Drain Cap and Seal Kit 22 90107 Filter Kit Cold Inlet Bush 23 90131 Lid, Gasket and Clips Kit 3Litre 23 90132 Lid, Gasket and Clips Kit 5 Litre 23 90213 Lid, Gasket and Clips Kit 7.5 Litre 24 90142 Tank Welded Kit 3Litre 24 90734 Tank Welded Kit 5Litre 24 90735 Tank Welded Kit 7.5Litre 25 90147 Insulation Kit 3Litre 25 90736 Insulation Kit 5Litre 25 90737 Insulation Kit 7.5Litre 26 90130 Clips for Curled Tank Kit 27 90744 PCB Kit Hydroboil 2006 28 90214 Sensor Sleep Mode Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Spare Parts 1 26 2 23 3 12 5 24 4 6 25 27 3 7 16 17 9 8 19 22 14 13 28 20 21 Page 15 of 16 18 11 10 15 Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00 Warranty Information Certain warranties may be implied by law into your contract with Zip. The warranty provided below is additional to these implied warranties and nothing set out below shall limit your statutory rights or rights at law. Zip Heaters (UK) Ltd warrants that, should any part fail within 24 calendar months of installation, that part will be repaired or replaced free of charge by Zip or its Distributor or Service Provider, except as set out below, provided the appliance is installed and used strictly in accordance with the instructions supplied, and that failure is not due to accident, misuse, abuse, unsuitable water conditions, or to any alteration, modification or repair by any party not expressly nominated by Zip. No costs are payable by the customer other than any mileage or travelling-time charges incurred by a Zip Service Provider or the cost of removal, cartage and re-installation of any component of the appliance if it needs to be returned for repair to Zip or its Distributor. This warranty does not cover damage resulting from non-operation of the appliance, the use of non authorised parts or consequential damage to any other goods, furnishings or property. No warranty applies to the life of any filtration cartridge installed with the appliance as cartridge life may vary according to water quality and the rate of water consumption. Zip does not exclude, restrict or modify any liability that cannot be excluded, restricted or modified or which cannot, except to a limited extent, be excluded, restricted or modified as between the owner or user and Zip under the laws applicable. Furthermore, this warranty does not displace any statutory warranty, but, to the extent to which Zip is entitled to do so, the liability of Zip under any statutory warranty will be limited at Zip’s option to the replacement of the appliance or supply of equivalent appliance, the payment of the cost of replacing the appliance or acquiring an equivalent appliance, or the payment of the cost of having the appliance repaired or the repair of the appliance. Head Office Zip Heaters (UK) Ltd 14 Bertie Ward Way Dereham Norfolk NR19 1TE Website: www.zipheaters.co.uk sales@zipheaters.co.uk Telephone: 0845 602 4533 Facsimile: 01362 692 448. Page 16 of 16 Registering Your Purchase Registering your Zip installation on the Zip website may help to establish date of installation should it become necessary to service the appliance under terms of the Zip warranty. To register your installation go to www.zipheaters.co.uk and look under the heading “Warranty”. As Zip policy is one of continuous product improvement, changes to specifications may be made without prior notice. Images in this booklet have been modified and may not be true representations of the finished goods. Zip Hydroboil Plus - Installation & Operating Instructions - 86584UK - May 2012 v1.00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : vivianl Create Date : 2012:05:22 08:26:28+10:00 Modify Date : 2012:05:22 08:26:28+10:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : 86584UK - BW_HBE6_UK_05-12;v1.00.indd Creator : vivianl Producer : Acrobat Distiller 9.5.1 (Windows) Document ID : uuid:47158327-e500-4f07-8e24-cb3084b9f578 Instance ID : uuid:26d74bf7-711d-4492-9cbe-1853fd918e6c Page Count : 16EXIF Metadata provided by EXIF.tools