Zip Water Product Guide April 2015

2016-08-23

: Zip Water Zip Water Product Guide April 2015 Zip Water_Product_Guide_April_2015 zipwater.brochures zipwater.uk

Open the PDF directly: View PDF .
Page Count: 104

Download
Open PDF In Browser	View PDF

The Zip Product Guide
2015
Issue 2

The complete range of Zip products
G4 G4
Including the innovative,G4exciting
G4 G4
TECHNOLOGY

CHN LOG
O

NOLOGY
CH
TE

TECHNOLOGY

G4
EC

HydroTap G4

TECHNOLOGY

HNOLOG

www.zipheaters.co.uk

G4
TE

Introduction

OLOGY
CHN
TE

C H N O LO G

G4
TECHNOLOGY

N O LO G

Thank you for considering a Zip product. Whichever one you choose,
you can be quite certain of one thing - nobody offers you a more
advanced boiling, chilled, sparkling water system for your project,
because nobody knows instant boiling water like Zip. We also lead the
way in the UK development of instantaneous hot water products.
Today millions of people around the world use Zip instant boiling water
systems each day in homes, public buildings, hospitals, schools, offices
and factories in more than sixty countries.
Zip remains world leader in instant boiling water, setting the pace in
time-saving, energy-saving, water-conserving and user-safety
technology.
You can be confident that the Zip product you choose is a sound
investment, because it is by far the best of its kind, designed to save
you time, energy and money every day and for many years to come.

Training
Zip’s experienced team of Training
Managers offer bespoke product
training geared to the needs of
Installers, Specifiers and Facility
Managers.
These ‘hands on’ sessions typically take place on site, or in one of
Zip’s specially designed training centres, covering all relevant product
installation, servicing and maintenance issues.
Additionally a choice of RIBA accredited CPD programmes are available
for those involved in the specification of boiling, chilled or hot water
products.

Prompt service
Zip HydroTap is better designed, better built and better backed than any
comparable boiling and chilled filtered water system and is designed
to give many years of service. However, like any appliance, it may
need attention from time to time to keep it in top operating condition.
To provide prompt service in any location, Zip has established a team
of national, fully trained, directly employed, service engineers covering
the whole of the UK – for installation, repairs or routine periodic
maintenance.
In the Greater London area (within the M25) we offer a same day
service, providing that the call is made before mid-day. Other areas
may take a little longer.
3

NEW for 2015
The new Zip HydroTap G4

The world’s most advanced drinking water system

Boiling | Chilled | Sparkling | Filtered | Instantly

G4
TE

OLOGY
CHN
TE

C H N O LO G

G4
TECHNOLOGY

N O LO G

Product Index
Drinking Water - Boiling
HydroTap G4
HydroTap technology
HydroTap commercial overview
HydroTap filtered boiling, chilled and sparkling
HydroTap filtered boiling
HydroTap filtered chilled
HydroTap 3-in-1, 4-in-1 and 5-in-1
HydroTap All-in-One
HydroTap Industrial
HydroTap for the home
HydroTap optional extras
HydroTap filtration
Wall mounted
Hydroboil Plus
Hydroboil
Econoboil
Duo
Red-E-Boil
Accessories

6-7
8-9
10-11
14-15
16-17
18-19
20-21
22-23
24-25
26-29
30-31
32-33
34-35
36-37
38-39
40-41
42-43
44-45
46-47

Drinking Water - Chilled

48-49

HydroTap
ChillTap & ChillTap Extra
Chillmaster
Wall Fountain
Chill Fountain
Chilled water for the home
Accessories

50-51
52-55
56-57
58-59
60-61
62-65
66-67

Hot Water

68-69

InLine Instantaneous - ES; CEX; DBX; DEX
Unvented - Aquapoint 5 to 15 litres
Unvented - Varipoint 10 & 15 litres
Unvented accessories
Unvented - Aquapoint 30 to 100 litres
Unvented - Varipoint 30 to 100 litres
Stainless steel unvented - AquaFlo
Open outlet vented - Contract
Open outlet vented - Tudor
Flatback storage - RCH

70-81
82-83
84-85
86-87
88-89
90-91
92-95
96-97
98-99
100-101

General Data

102-103

HydroTap G4

Zip HydroTap

The most intelligent filtered drinking water
system ever invented
Zip Heaters’ policy of continual product development has resulted
in the most advanced, energy saving, time saving product providing
instant filtered, boiling, chilled and sparkling drinkingG4
water. G4
TE

The Zip HydroTap G4

OLOGY
CHN
TE

C H N O LO G

TECHNOLOGY

G4
TECHNOLOGY

N O LO G

New under-sink Zip Command-Centre units are more compact
than ever before and all connection points are now push-fit and at the
rear, reducing installation time. A front access door makes changing the
filtration cartridge as simple and quick as replacing a light bulb.

Advanced insulation and electronics technology reduces standby energy
consumption substantially over earlier Zip models of similar capacity, by up
to 53%.

Auto-calibrates to boiling point upon installation, regularly re-calibrates
and optimises performance.

Simple pin-code-protected touch-screen puts managers in total control
of each appliance.

Adjustments include temperature, dispensing time, safety settings and
energy-saving settings.

Continuous auto-diagnostics system monitors performance and provides
total history on demand.

Integral cross-ventilation system eliminates cupboard heat-up with no
need for an external fan.

Multiple filter life settings, with precise litre monitoring, to optimise filter
replacement timing.

Added peace-of-mind features include overload protection, temperature
monitoring, internal leak detection, plus an internal pressure limiting valve.

HydroTap G4

Zip brings you the most
intelligent filtered drinking water
tap ever invented.
■■

Adjustable water temperature: boiling water 100oC to 68oC, factory
set at 98oC for optimum results. Chilled water 5oC to 14oC.

■■

Power-PulseTM electronic technology controls the set boiling
temperature within 0.2oC and eliminates overboil.

■■

Choice of fingertip control for fast cup filling (lever down) or handsfree pot filling (lever up).

■■

Can be set to require finger-thumb safety operation for boiling water
access, eliminating the risk of accidental use. Can also be set to boiling
isolation mode for increased safety.

■■

Longer spout caters for under-mount sinks. Extended lever & Braille
pads also available.

■■

Energy saving technology

•

Low-energy lights signal boiling water is ready, chilled is ready, or
filter change is due.

•

Hidden light sensor sends appliance to sleep, to conserve energy
when the room goes dark.

•

Sleeps or powers off after 2 hours of non-use.

•

Plus 24/7 on/off timer, allowing power to be turned off,
automatically, for weekday or weekend periods.

HydroTap technology

Zip HydroTap technology
®

Superior technology saves energy and
conserves water

Power-Pulse™ energy saving technology
Reduces power consumption by allowing the system to
regulate its power during periods of high and low usage.
This saves energy whilst maintaining the tightest possible
temperature control.

Automatically calculates boiling point
Because boiling point varies by altitude, Zip HydroTap
pinpoints boiling point during installation and sets it
accordingly.

Sleeps when inactive
The system can be pre-set to power down after 2 hours
of non-use, but will still retain stored ‘boiling’ water at
an energy saving 64°C, or can also be set to hibernate
(power off completely). The system quickly recovers to
the pre-set boiling temperature upon further draw-off.

Programmable 24/7 timer
Pre-set the ‘power on’ and ‘power off’ times
(once a day) for those periods when the Zip HydroTap
will not be used, such as overnight or at weekends (for
commercial users).

Cuts down water wastage, too
Every drop of water is dispensed at the set temperature,
so there is, no longer, any need to waste water running a
tap until the water is at the correct temperature.

G4
OLO

G4
TECHNOLOGY

Zip HydroTap sustainability
®

G4
G4
Supporting the environment
as
neverG4
before
NOLOGY
CH
TE

TECHNOLOGY

HydroTap technology

CHN

HNOLOG

Conserves water
New, improved air-cooled system, with integral cross-ventilation,
does not dump water to waste. An environmentally responsible
solution.

Conserves energy
Choice of four energy-saving settings to allow installers or site
managers to adjust each set-up to operate with optimum energy
efficiency.

RoHS Compliant
All materials involved in Zip HydroTap manufacturing comply with
the European Restriction of Hazardous Substances Directive
2011/65/EC.

WRAS Approval
All Zip HydroTap G4 commercial products carry the WRAS (Water
Regulations Advisory Scheme) accreditation.

Standing heat-loss energy consumption comparison
(tests for a 24 hour period with no draw-off)
Example G3
models

Energy used
(watt/hours)

Example G4
models

Energy used
(watt/hours)

Energy saved

BC100/125

60.6

BC160/125G4

44%

BC150/175

74.5

BC240/175G4

36.2

51%

N.B. When the sleep mode facilities were activated on both the G3 and G4 models,
the G4 showed a 53% stand-by energy saving over the superceded G3 models.

HydroTap range

Zip HydroTap range
®

General Information—Commercial HydroTap
Tap head

Chrome plated, die cast tap
body with push and pull levers.
Integral safety lock and LED
indicators. It can be mounted at
the sink or on the optional font
and drain (see page 31).

D.D.A. options

Oversize tap levers. Braille
covers.

Control panel

Plumbing

The water supply must be
potable (drinkable).
If static pressure exceeds 7 bar,
a pressure reducing valve must
be fitted.
An isolating valve should be
installed between the water
supply and the unit.

Located on undercounter unit
for programming sleep mode,
timer, water temperature and
water delivery. (see page 7)

Venting

Filtration system

Electrical

Integral triple-action 0.2 micron
encapsulated cartridge.

Safety features

Child-proof interlock on
tap. Boiling isolation mode.
Undercounter safe tray with
leak detector.

The cupboard housing the unit
must be amply ventilated as per
the installation manual.
To be wired to a double pole
switched fused spur with a
minimum break capacity of 13
amp.
If the booster system is used it
must be connected to a separate
fused spur.
Installation must comply with
current IEE regulations.

Pin-code protection.

Finishes

Available in Bright Chrome
(standard), Satin Chrome, Gloss
Black and Matt Black.

Approvals

WRAS. CE endorsed.

Warranty

2 years on site parts and labour
with additional 3 years on the
boiling tank. For full details visit:
www.zipheaters.co.uk/warranty

3 metre power cable provided.

Caution

In some hard water areas
where scale is an issue we
recommend the fitting of one
of the Zip Professional range
of scale filtration systems.
(See page 33).
116mm CL reach

308 mm

207 mm
207 mm
125 mm
40 mm

HydroTap
sink
mounted

HydroTap
font
mounted

104 mm
219 mm

HydroTap range

Zip HydroTap range
G4
G4 G4
TheG4wide
range of products available
®

C H N O LO G

TECHNOLOGY

OLOGY
CHN
TE

C H N O LO G

OLOGY
CHN
TE

TECHNOLOGY

N O LO G

OLOGY
CHN
TE

C H N O LO G

TECHNOLOGY

G4
TECHNOLOGY

N O LO G

C H N O LO G

N O LO G

Boiling & chilled
TECHNOLOGY

OLOGY
CHN
TE

TECHNOLOGY

Boiling, chilled & sparkling

TECHNOLOGY

G4
TECHNOLOGY

Boiling only

C H N O LO G

G4
TECHNOLOGY

OLOGY
CHN
TE

TECHNOLOGY

N O LO G

Chilled only

G4
TECHNOLOGY

N O LO G

Boiling & ambient
G4
TE

OLOGY
CHN
TE

C H N O LO G

TECHNOLOGY

G4
TECHNOLOGY

N O LO G

3-in-1,4-in-1
&
5-in-1

OLOGY
CHN
TE

C H N O LO G

G4
G4

TECHNOLOGY

G4
TECHNOLOGY

OLOGY
CHN
TE

C H N O LO G

G4
G4
TECHNOLOGY

N O LO G

TECHNOLOGY

G4
G4
TECHNOLOGY
TECHNOLOGY

OLOGY
CHN
TE

TECHNOLOGY

G4
G4

TE
Y
C
T E H N O LO G
Y
CH
N O LO G

All-in-One

Industrial
&
Custodial

C H N O LO G

G4
TECHNOLOGY

N O LO G

For the Home

HydroTap boiling, chilled and sparkling

Zip HydroTap

Boiling, chilled and sparkling filtered water

Features & benefits
•
•

•
•
•
•

•
•
•
•
•

•

Simple to operate, and with
more safety features than
ever.
Press red lever for boiling
water, however, if safety
interlock is activated, press
red lever and safety button
at the same time.
Press the blue lever to fill
a glass, jug or bottle with
chilled filtered water.
Press both red and blue
levers together for sparkling
chilled filtered water.
Lift either lever to run water
for any pre-set period of 5 to
15 seconds.
Boiling water can be
isolated, if needed, during
periods when your HydroTap
is unattended.
Smarter technology cuts
power consumption
dramatically.
Power-Pulse™ controls
power phasing to cut power
costs.
Sleeps or powers off after 2
hours of non-use.
24/7 on/off weekly timer to
save energy when HydroTap
is not in use.
BCS100/75G4 and
BCS160/175G4 can be
upgraded, retrospectively,
if additional boiling water
capacity is required, by
installing the booster unit
SP91412.
Can be mounted at the sink
or on the optional font and
drain (see page 31).

Capacity choice options
BCS100/75G4.
BCS140/75G4 -including booster
unit.
(separate fused spur needed)
BCS160/175G4
BCS240/175G4 -including
booster unit.
(separate fused spur needed)

Boiling system

Open outlet, vented; factory set
to operate at 98°C.

Chilling system

Fan-cooled condenser type,
factory set to operate at 5-14°C.
Flow rate - Chilled 4.0 l/min
Sparkling 1.8 l/min
Refrigerant R134A.

Temperature settings

The boiling temperature can be
adjusted from 100°C to 68°C.
Factory set at 98°C.
Flow rate - 4.0 l/min

Finishes

These models are available in 4
tap finishes:
Bright Chrome (standard)
Gloss Black
Matt Black
Satin Chrome
Matching fonts are also available
See page 31 for details.

N.B.

For general installation and
specification details of the
HydroTap G4 range see page 10.
Visit www.zipheaters.co.uk/
downloads

G4
OLOGY
CHN
TE

C H N O LO G

G4
TECHNOLOGY

HydroTap boiling, chilled and sparkling

TECHNOLOGY

N O LO G

Under-counter Zip Command Centre

BCS100/75G4 & BCS140/75G4
BCS160/175G4 & BCS240/175G4
Product Code

Maximum
boiling
cups/hour

Maximum
chilled /
sparkling
glasses/hour

Power
rating
kW@230V

Dimensions
W x D x H
(mm)

BCS100/75G4

100

2.15

281 x 470 x 335

BCS140/75G4*

140

2.15 + 2.2

281 x 470 x 335

BCS160/175G4

160

175

2.30

450 x 470 x 335

BCS240/175G4*

240

175

2.30 + 2.2

450 x 470 x 335

(including booster unit)

These Zip HydroTap G4 models are installed with a 2.2kW, externally mounted, booster unit and must be connected
to two separate 13 amp power supplies.

HydroTap boiling and chilled

Zip HydroTap

Boiling and chilled filtered water

Features & benefits
•
•

•
•
•
•

•
•
•
•
•

•

Simple to operate, and with
more safety features than
ever.
Press red lever for boiling
water, however, if safety
interlock is activated, press
red lever and safety button
at the same time.
Press the blue lever to fill
a glass, jug or bottle with
chilled filtered water.
Press both red and blue
levers together for sparkling
chilled filtered water.
Lift either lever to run water
for any pre-set period of 5 to
15 seconds.
Boiling water can be
isolated, if needed, during
periods when your HydroTap
is unattended.
Smarter technology cuts
power consumption
dramatically.
Power-Pulse™ controls
power phasing to cut power
costs.
Sleeps or powers off after 2
hours on non-use.
24/7 on/off weekly timer to
save energy when HydroTap
is not in use.
BC100/75G4 and
BC160/175G4 can be
upgraded, retrospectively,
if additional boiling water
capacity is required, by
installing the booster unit
SP91412.
Can be mounted at the
sink or on the optional font
and drain (see page 31).

Capacity choice options
BC100/75G4.
BC140/75G4.-including booster
unit.
(separate fused spur needed)
BC160/175G4
BC240/175G4 -including booster
unit.
(separate fused spur needed)

Boiling system

Open outlet, vented; factory set
to operate at 98°C.
The boiling temperature can be
adjusted from 100°C to 68°C.
Factory set at 98°C.
Flow rate - 4.0 l/min

Chilling system

Fan-cooled condenser type,
factory set to operate at 5-14°C.
Flow rate - 4.0 l/min
Refrigerant R134A.

Finishes

These models are available in 4
tap finishes:
Bright Chrome (standard)
Gloss Black
Matt Black
Satin Chrome
Matching fonts are also available
See page 31 for details

N.B.

For general installation and
specification details of the
HydroTap G4 range see page 10.
Visit www.zipheaters.co.uk/
download

G4
C H N O LO G

G4
TECHNOLOGY

OLOGY
CHN
TE

TECHNOLOGY

HydroTap boiling and chilled

TECHNOLOGY

N O LO G

Under-counter Zip Command Centre

BC100/75G4 & BC140/75G4
BC160/175G4 & BC240/175G4

Product Code

Maximum
boiling
cups/
hour

Maximum
chilled
glasses/
hour

Power rating
kW@230V

Dimensions
W x D x H
(mm)

BC100/75G4

100

2.05

280 x 470 x 335

BC140/75G4*

140

2.05 + 2.20

280 x 470 x 335

BC160/175G4

160

175

2.20

450 x 470 x 335

BC240/175G4*

240

175

2.20 + 2.20

450 x 470 x 335

These Zip HydroTap G4 models are installed with a 2.2kW, externally mounted booster unit and must be connected
to two separate 13 amp power supplies.

HydroTap boiling

Zip HydroTap

Filtered boiling (B models)
& filtered boiling and ambient water (BA models)
Features & benefits
•
•

•
•
•

•
•
•
•
•

•

Simple to operate, and with
more safety features than
ever.
Press red lever for boiling
water, however, if safety
interlock is activated, press
red lever and safety button
at the same time.
For boiling ambient models
right hand blue lever for
filtered ambient water.
Lift lever to run water for any
pre-set period of 5 to 15
seconds.
Boiling water can be
isolated, if needed, during
periods when your HydroTap
is unattended.
Smarter technology cuts
power consumption
dramatically.
Power-Pulse™ controls
power phasing to cut power
costs.
Sleeps or powers off after 2
hours on non-use.
24/7 on/off weekly timer to
save energy when HydroTap
is not in use.
B160G4 and BA160G4 can
be upgraded, retrospectively, if additional boiling
water capacity is required,
by installing the booster unit
SP91412.
Can be mounted at the sink
or on the optional font and
drain (see page 31).

Capacity choice options
B160G4 - filtered boiling
B240G4.- filtered boiling,
including booster unit.
(separate fused spur needed)
BA160G4 - filtered boiling &
ambient
BA240G4 -filtered boiling &
ambient, including booster unit.
(separate fused spur needed)

Boiling system

Open outlet, vented; factory set
to operate at 98°C.
The boiling temperature can be
adjusted from 100°C to 68°C.
Factory set at 98°C.
Flow rate - 4.0 l/min

Ambient supply

Free-flow, mains pressure, at
incoming water temperature

Finishes

These models are available in 4
tap finishes:
Bright Chrome (standard)
Gloss Black
Matt Black
Satin Chrome
Matching fonts are also available
See page 31 for details

N.B.

For general installation and
specification details of the
HydroTap G4 range see page 10.
Visit www.zipheaters.co.uk/
downloads

G4
OLOGY
CHN
TE

C H N O LO G

G4
TECHNOLOGY

HydroTap boiling

TECHNOLOGY

N O LO G

Boiling and ambient tap
Boiling only tap
Under-counter Zip Command Centre

Product
Code

Maximum
boiling
cups/hour

Maximum
ambient
glasses/hour

Power
rating
kW@230V

Dimensions
W x D x H
(mm)

BA160G4

160

Free Flow

1.90

280 x 313 x 335

BA240G4*

240

Free Flow

1.90 + 2.20

280 x 313 x 335

B160G4

160

N/A

1.90

280 x 313 x 335

B240G4*

240

N/A

1.90+ 2.20

280 x 313 x 335

These Zip HydroTap G4 models are installed with a 2.2kW, externally mounted booster unit and must be connected
to two separate 13 amp power supplies.

HydroTap chilled

Zip HydroTap

Filtered chilled and sparkling water

Features and benefits

Choice options

•

C175G4 - Chilled only
CS175G4 - Chilled and
Sparkling

•

•
•
•

•

Provides chilled filtered
water instantly.
Provides chilled and
sparkling fitered water
instantly.
No need for expensive and
environmentally damaging
bottled water.
No need to store and
handle bottled water.
Free-Flow system means
no fear of running out of
drinking water in extreme
weather conditions.
Can be mounted at the
sink or on the optional font
and drain (see page 31).

Chilling system

Fan-cooled condenser type,
factory set to operate at
5-14°C.
Flow rate - Chilled 4.0 l/min
Sparkling 1.8 l/min
Refrigerant R134A.

Finishes

These models are available in 4
tap finishes:
Bright Chrome (standard)
Gloss Black
Matt Black
Satin Chrome
Matching fonts are also
available
See page 31 for details

N.B. For general installation
and specification details of the
HydroTap range see page 10.

G4
OLOGY
CHN
TE

C H N O LO G

G4
TECHNOLOGY

HydroTap chilled

TECHNOLOGY

N O LO G

Under-counter Zip Command Centre

Product Code

Maximum chilled
glasses/hour

Power rating
kW@230V

Dimensions
W x D x H
(mm)

C175G4

175

0.30

336 x 476 x 335

CS175G4

175

0.45

336 x 476 x 335

HydroTap 4-in-1

Zip HydroTap 3-in-1, 4-in-1 & 5-in-1
®

Boiling, chilled and sparkling filtered drinking
water PLUS hot, cold (ambient) or mixed
warm water – from two taps
Features & benefits

Offers all of the advantages of a
standard HydroTap plus these
additional 4 benefits.
• Provides hot water at 50°C
to the mixer tap (supplied)
and either boiling, chilled and
sparkling (5-in-1), or boiling and
chilled (4-in-1) or boiling or
boiling and ambient (3-in-1)
to the HydroTap.

Flow rate - 4.0 l/min
Refrigerant R134A.

Mixer Flow

The mixer tap will deliver up to
3ltr/min, ideal for rinsing cups and
handwashing.

Mixer Taps

The mixer tap is available in three
types:

• Saves the cost of a separate
hot water supply.
• Saves space.
• Conserves energy.

Classic

Choice options

See table on page 21
N.B.The above units are
supplied, as standard, with the
classic mixer tap. Alternative mixer
taps (the square and the Tall) are
also available.

Square - add S to the
product order code

Boiling system

Open outlet, vented; factory set to
operate at 98°C.
The boiling temperature can be
adjusted from 100°C to 68°C.
Factory set at 98°C.
Flow rate - 4.0 l/min

Tall - add T to the
product order code

Chilling system

Fan-cooled condenser type,
factory set to operate at 5-14°C.

Under-counter Zip Command Centre

5-in-1

4-in-1

3-in-1

G4
OLOGY
CHN
TE

C H N O LO G

G4
TECHNOLOGY

HydroTap 4-in-1

TECHNOLOGY

N O LO G

5-in-1 provides filtered boiling, chilled and sparkling water delivered through the HydroTap
PLUS hot and cold (ambient) through the mixer tap.

4-in-1 provides filtered boiling and chilled (or ambient) water delivered through the
HydroTap PLUS hot and cold (ambient) through the mixer tap.

3-in-1 provides filtered boiling water delivered through the HydroTap PLUS hot and cold
(ambient) through the mixer tap.
Product Code

Maximum
boiling
cups/hr

Maximum
chilled
glasses/hr

Power rating
kW@230V

Dimensions
W x D x H
(mm)

3-in-1 (filtered boiling PLUS hot and cold through a separate mixer)
BH160G4

160

N/A

1.90

280 x 313 x 335

BH240G4*

240

N/A

1.90 + 2.20

280 x 313 x 335

4-in-1 (filtered boiling & chilled PLUS hot & cold through a separate mixer)
BCH160/175G4

160

175

2.20

450 x 470 x 335

BCH240/175G4*

240

175

2.20+ 2.20

450 x 470 x 335

4-in-1 (filtered boiling & ambient PLUS hot & cold through a separate mixer)
BAH160G4

160

N/A

1.90

280 x 313 x 335

BAH240G4*

240

N/A

1.90 + 2.20

280 x 313 x 335

5-in-1 (filtered boiling, chilled & sparkling PLUS hot and cold through a separate mixer)
BCSH160/175G4

160

175

2.30

450 x 470 x 335

BCSH240/175G4*

240

175

2.30 + 2.20

450 x 470 x 335

These Zip HydroTap G4 models are installed with a 2.2kW, externally mounted booster unit and must be connected
to two separate 13 amp power supplies.

HydroTap All-in-One

Zip HydroTap All-in-One
(Commercial)
®

Boiling, chilled and sparkling filtered drinking
water PLUS hot, cold (ambient) or mixed
warm water – all from one tap
Features & benefits
•

Offers all of the advantages
of a standard HydroTap
plus these additional
benefits.

•

Replaces mixer taps to
declutter and simplify
kitchen design.

•

Vented systems save
space, cost and energy by
eliminating the need for a
separate hot water supply.

•

Separate drinking water
controls for convenience
and safety.

•

Vented and non-vented
systems available.

Choice options
See table on page 23

Boiling system

Open outlet, vented; factory to
operate at 98°C.
The boiling temperature can be
adjusted from 100°C to 68°C.
Factory set at 98°C.
Flow rate - 4.0 l/min

Chilling system

Fan-cooled condenser type,
factory set to operate at 5-14°C.
Flow rate - 4.0 l/min
Refrigerant R134A.

Mixer Flow

The mixer tap will deliver up to
3ltr/min, ideal for rinsing cups and
handwashing.

Tap head

Long reach spout swings through
120° to make use at the sink, for
washing up, much easier.

Finishes
This model is available in 4 tap
finishes:
Bright Chrome (standard)
Gloss Black
Matt Black
Satin Chrome
Matching fonts are also available
See page 31 for details

Under-counter Zip Command Centre

For 160/175 & 240/175 models

For 100/75 & 140/75 models

G4
OLOGY
CHN
TE

C H N O LO G

G4
TECHNOLOGY

HydroTap All-in-One

TECHNOLOGY

N O LO G

Product Code

Maximum
boiling
cups/
hour

Maximum
chilled
glasses/
hour

Power rating
kW@230V

Dimensions
W x D x H
(mm)

Boiling & chilled with non-vented mixer tap (hot & cold feed)
AN100/75G4
AN140/75G4

AN160/175G4

AN240/175G4

100

2.05

280 x 470 x 335

140

2.05 + 2.20

280 x 470 x 335

160

175

2.20

450 x 470 x 335

240

175

2.20 + 2.20

450 x 470 x 335

Boiling & chilled with vented mixer tap (cold feed only - no hot supply needed)
AV100/75G4

100

2.05

280 x 470 x 335

AV140/75G4

140

2.05 + 2.20

280 x 470 x 335

AV160/175G4

160

175

2.20

450 x 470 x 335

240

175

2.20 + 2.20

450 x 470 x 335

AV240/175G4

Boiling, chilled & sparkling with non-vented mixer tap (hot & cold feed)
SAN100/75G4

SAN140/75G4

SAN160/175G4

SAN240/175G4

100

2.15

280 x 470 x 335

140

2.15 + 2.20

280 x 470 x 335

160

175

2.30

450 x 470 x 335

240

175

2.30 +2.20

450 x 470 x 335

Boiling, chilled & sparkling with vented mixer tap (cold feed only - no hot supply needed)
SAV100/75G4

100

2.15

280 x 470 x 335

SAV140/75G4

140

2.15 + 2.20

280 x 470 x 335

SAV160/175G4

160

175

2.30

450 x 470 x 335

240

175

2.30 + 2.20

450 x 470 x 335

SAV240/175G4

These Zip HydroTap G4 models are installed with a 2.2kW, externally mounted booster unit and must be connected
to two separate 13 amp power supplies.

HydroTap in Industry

Zip HydroTap in Industry
®

Heavy duty designs for industrial
environments and institutions
Features & benefits

Offers all of the advantages of a
standard HydroTap plus these
additional benefits.
Super strong tapered shank
anchor (side touch models).
Damage-resistant side or top
touch buttons.
Simple 2-button without safety
lock.
Optional 3-button with safety
lock.
Can be installed R/H or L/H.
Up to 240 boiling cups per
hour.
Up to 175 chilled glasses per
hour.
Side touch variant (primarily
for use in high security locations,
such as prisons) has a high
strength tapered base which
fastens to an undersink clamp
block with a reinforcing spine.

Choice options

See panel on page 25
Boiling system
Open outlet, vented; factory set
to operate at 98°C.
The boiling temperature can be
adjusted from 100°C to 68°C.
Factory set at 98°C.
Flow rate - 4.0 l/min

Chilling system

Fan-cooled condenser type,
factory set to operate at 5-14°C.
Flow rate - 4.0 l/min
Refrigerant R134A.

Tap Head

Chrome plated.

N.B. For general installation

and specification details of the
HydroTap range see page 10.
Visit www.zipheaters.co.uk/
downloads

OLOGY
CHN
TE

C H N O LO G

HydroTap in Industry

G4
G4

TECHNOLOGY

G4
TECHNOLOGY

TECHNOLOGY

N O LO G

Under-counter Zip Command Centre

Product Code

Maximum
boiling
cups/
hour

Maximum
chilled
glasses/
hour

Power rating
kW@230V

Dimensions
W x D x H
(mm)

IS160/175G4

160

175

2.20

450 x 470 x 335

IS240/175G4*

240

175

2.20 + 2.20

450 x 470 x 335

IT160/175G4

160

175

2.20

450 x 470 x 335

IT240/175G4*

240

175

2.20 + 2.20

450 x 470 x 335

Side-touch model

Top-touch model

HydroTap for the home

Zip HydroTap for the Home
®

Instant boiling, chilled and sparkling filtered
G4 G4
water systems for home kitchens, large
and
G4
G4 G4
small, traditional or contemporary.
TE

OLOGY
CHN
TE

TECHNOLOGY

Now available with new G4 technology. G4
TE

Features and benefits
•

No more waiting for water
to boil.

•

No more bottled water to
buy.

•

Easy to use.

•

0.2 micron filtration for great
tasting healthy water.

•

Scale management filter
option.

•

Can be sited next to sink or
on optional font and drain.

•

Both the boiling and
chilled water systems are
pumped for correct water
temperature delivery, plus
no wasted water.

•

Even more energy efficient.

•

Integral child safety lock.

•

Tap levers can be ‘locked’
for filling of large vessels.

•

Measured dispense when
levers are in upright
position.

•

Power-pulse energy saving
technology.

•

Sleep mode to save power.

•

Integral 24/7 timer.

On sink installation

C H N O LO G

N O LO G

Models available

Boiling, chilled and sparkling
filtered water.
Boiling and chilled filtered water.
Boiling and cold (ambient) filtered
water.
Boiling filtered water.
Chilled filtered water.
All-in-One model with boiling,
chilled, hot and cold water and
now sparkling from one tap.
4-in-1, providing boiling and
chilled water, hot and cold water
to separate mixer tap (provided).
See options on page 20.

Taps
All taps, except for the
DOMSAN4, DOMAN4,
DOMHBH4, DOMBAH4.
DOMBCH4 and DOMBCSH4
models are available with the
option of different finishes to the
standard chrome. (See page 31)
The separate mixer tap is
available in three types. (See
page 20).

Warranty
3 years on site parts and labour
with additional 2 years on the
boiling tank. For full details visit:
www.zipheaters.co.uk/warranty

Installation using the optional font and drain

HydroTap for the home
Under-counter Zip Command Centre

Product
Code

Boiling

Chilled

Sparkling

Hot & cold
(for mixer facility)

Dimensions
W x D x H
(mm)

DOMBCS4

Yes

280 x 470 x 335

DOMBC4

Yes

280 x 470 x 335

Yes - with integral
mixer.
Requires hot and
cold feeds

280 x 470 x 335

DOMSAN4

Yes

DOMAN4

Yes

Yes - with integral
mixer.
Requires hot and
cold feeds

280 x 470 x 335

DOMBA4

Yes

Ambient

280 x 313 x 335

DOMHB4

Yes

280 x 313 x 335

DOMCS4

Yes

280 x 389 x 335

DOMC4

Yes

280 x 389 x 335

DOMHBH4

Yes

Yes - with separate

280 x 470 x 335

DOMBAH4

Yes

Ambient

Yes - with separate
mixer tap

280 x 470 x 335

DOMBCH4

Yes

Yes - with separate
mixer tap

280 x 470 x 335

DOMBCSH4

Yes

Yes - with separate
mixer tap

280 x 470 x 335

mixer tap

HydroTap Miniboil

Zip HydroTap
Miniboil Classic & Elite
®

Super compact economy models for filtered
boiling and filtered cold (ambient) water for
the home
Models available

Filtration

• Boiling and cold (ambient)
filtered water with Elite tap.

Additional anti-scale filtration
option.

• Boiling and cold (ambient)
filtered water with Classic tap.

Features and benefits

• No waiting for water to boil.

Supplied with external triple
action 0.2 micron filter.

Warranty

• Scale management filter option.

12 months on site parts and
labour warranty. These products
are designed for use in domestic
environments and their use
commercially may invalidate the
warranty.

• Can be sited next to sink or on
optional font and drain.

Visit www.zipheaters.co.uk/
download

• Easy to use touch pads.
• 0.2 micron filtration for great
tasting healthy water.

• Inactivity sleep mode.
• Filter change indicator.
• Cool-touch tap.
• Compact size makes it ideal
for kitchens with limited space.
• Highly energy efficient.
• Safety interlock.
• Power-Pulse™ technology.

Zip Miniboil Elite

Zip Miniboil Classic

Miniboil shown font mounted

HydroTap Miniboil
Product
Code

Tap style

Boiling

Ambient

Rating
(kW@230V)

Dimensions
W x D x H mm

MB1BA

Classic

•

1.5

212 x 272 x 338

MB2BA

Elite

•

1.5

212 x 272 x 338

HydroTap options

Zip HydroTap Options
®

Finishes
Traditional Zip HydroTap and fonts are available in standard Bright chrome and a choice of
three additional finishes.
Not available for Industrial, 3-in-1, 4-in-1models and 5-in-1 models.

Gloss Black

Add ‘B’ to normal code
when ordering.

Satin Chrome

Add ‘S’ to normal code
when ordering.

Matt Black

Add ‘M’ to normal code
when ordering.

Order Codes:
ZT008 – Standard Chrome
ZT009 – Satin Chrome
ZT010 – Gloss Black
ZT012 – Matt Black
*Not for use with All-in-One.

HydroTap optional extras

Font and Drain*

Zip HydroTap can be ordered with a
matching font and drain for mounting
remotely from the sink.

Drainless Font
For locations where there is no
available drainage, the Zip “Drainless
Font” system ensures the safe and
effective collection of waste water
from a HydroTap font.
Order Code: ZT006

Over sized levers

All HydroTap models, except for
models in the All-in-One, Industrial
and Miniboil ranges, can be fitted with
oversize levers to assist those with
restricted dexterity.
Order Codes: Add ‘D’ to normal order
code

Braille covers

To aid those with sight issues Braille
covers can be fitted to these levers.
Order Codes:
SP99910 – Boiling/chilled
SP99911 – Boiling only
SP99912 – Chilled only

Sparkling consumables
Order Codes:
ZT400 – CO2 canister (single).
ZT401 – CO2 regulator

HydroTap Filtration

Zip HydroTap Filtration
®

All HydroTap products NOW feature .02
micron filtration
New Zip 0.2 micron filters reduce chlorine
taste and odour, filtering out particles
more than one fifth of a micron in size
– that’s one five-thousandth (1/5000th)
of a millimetre – twenty five times finer
than commonly used 5.0 micron filters,
designed to filter out both Cryptosporidium
and Giardia cysts and other impurities,
for crystal-clear great-tasting water and
healthier drinking.

This is arguably the most advanced and
most practical water filtration system
available anywhere today, developed to
meet our exacting specifications by the
world leader in water filter technology.

Zip 0.2 micron filter cartridges

are incorporated into the Zip HydroTap installation
under the sink, or out of sight within the Zip
HydroTap command-centre installed beneath
the tap.

Zip 0.2 micron filter cartridges

are hygienically encased for fast and easy filter
cartridge replacements. A white light on the
tap will flash to indicate that the filter requires
changing.
Order code: ZT402

Zip HydroTap ‘filter change
light’ flashes when a filter change is due.

It can be set to measure both water volume
and the number of days in service, signalling
whichever occurs first.

Recommended for use when the water
hardness level is above 4 degrees Clark
(60 parts per million CaCO3).
• Triple action filtration

The Order Codes are:
FL1100G4 KIT
FL2300G4 KIT
FL3600G4 KIT
FL6000G4 PLUS KIT

• Ion exchange resin to
reduce water hardness
• Carbon block to improve
taste and odour

HydroTap Filtration

Scale Management

• High efficiency filtration to
remove particulates
• Choice of four filters to suit
various applications
• Can be installed horizontally if
required using optional
bracket

Choice of four filters:
• FL1100 with submicron
filtration for domestic use.
• FL2300 with one micron
filtration for light commercial use.
• FL3600 with one micron
filtration for normal
commercial use.

Zip Professional Range

High performance limescale filtration system
for use with Zip HydroTap.

• FL6000 PLUS with one
micron filtration for heavy
commercial use.
• For initial installation each filter
has a dedicated installation
kit, which includes the
head, all necessary push
fit components.

UK Scale Map
Hard to very hard
Medium hard
Soft

N.B. Check with local water authority for accurate data
33

Wall mounted instant boiling water

Overview
Wall mounted instant boiling water
Zip Hydroboil Plus
Zip Hydroboil
Zip Econoboil

Instant boiling water heaters are essential appliances for the workplace
and are available in the widest range of models and capacities.

Saves time

No more time wasted waiting for water to
boil—Zip delivers boiling water instantly, at
the touch of a tap.

Saves energy

No energy is wasted boiling more water
than needed—fingertip control gives a cup
full or teapot full at a time.

Saves space

No cluttered worktops—Zip instant boiling
water eliminates the need for kettles and
exposed power leads.

Saves money

Costs little to run—thanks to energyefficient design and electronic controls
(Hydroboil Plus) to minimise power
consumption.

Sets a new standard

Every working day in the UK over eight
million cups of tea and coffee are made
using Zip instant boiling water systems.

Temperature control

Zip’s patented high precision temperature
control systems are designed to keep the
boiling water within one degree of the set
temperature. This means that boiling water
and only boiling water is delivered.

Ranges

Zip offers a choice of three ranges:

Hydroboil Plus
Thermostatically controlled, twin chamber
technology with stainless steel boiling tank.
Premium insulation and cool touch two way
tap with safety lock.
Energy saving Power-Pulse™
Sleep mode - after 2 hours of no demand
or when lights turned off.
Integral 24 hour 7 day timer.
Available in sizes from 3.0 to 40.0 litres.
White or stainless steel finishes.

Hydroboil
Thermostatically controlled, twin chamber
technology with stainless steel boiling tank.
Premium insulation and chrome catering
style tap.
Available in sizes from 1.5 to 40.0 litres.
White or stainless steel finishes.

Econoboil
Thermostatically controlled, twin chamber
technology with copper boiling tank.
Tontine insulation.
Chrome catering style tap.
Available in 3.0 & 5.0 litres.
White finish.

Wall mounted instant boiling water

Zip Hydroboil Plus cuts energy
consumption in 5 ways
Steam-Heat-Boost System
Steam from boiling water is recycled to pre-heat incoming cold water.
A patented metering tube maintains the stored water within 1°C of set
temperature.
Power-Pulse™ energy saving technology
Applies full power only during heavy usage periods cutting back to micropulse power during light usage or when unused — not available on 40 litre
model.
Inactivity sleep mode
After 2 hours of non-use Hydroboil Plus enters sleep mode, allowing the
water temperature to reduce to 65° at which it is maintained until next
draw-off.
Low light sleep mode
When activated, an integral light detector activates this facility when room
light is switched off and the unit enters sleep mode as above.
Integral 24 hour 7 day timer
Switches system off during known periods of inactivity,
returning to full functionality ahead of next expected demand.

Further energy savings are made due to the use of the unique cool touch tap, where no metal
parts are used.
35

Wall mounted instant boiling water

Zip Hydroboil Plus
Wall mounted instant boiling water
3, 5, 7.5, 10, 15, 25, 40 litre

Heating element

Installation

Long-life incoloy sheathed embedded rod
type. Dry start protection.

Install over a draining board, or work top
fitted with a drip tray. Tap spout should be
no higher than necessary to fill large pots.
Minimum tap height above draining board
for on-wall fitting is 200mm.

Boiling chamber
Twin chamber-stainless steel. Steam-HeatBoost technology. Crevice-free stainless
steel with removable access ports, top and
bottom.

Insulation
Compressed high temperature insulation
panels on sizes below 10 litres, engineered
for easy boiling chamber access. High
efficiency aluminium backed mineral wool
insulation on other sizes.

Thermostat

Plumbing
Designed for direct connection to a potable
cold water supply with a minimum pressure
of 0.7 bar. If pressure exceeds 7 bar, a
pressure limiting valve must be fitted. An
isolating valve should be installed between
the water supply and the heater.

Concealed plumbing
Connect inlet and vent pipes from the rear via
15mm capillary elbows.

Thermistor controlled.

Case
Stainless steel or corrosion-resistant, white
enamelled steel.

Temperature Settings
On installation, to suit user needs, the boiling
water temperature can be adjusted from
100˚C to 68˚C.

Control Panel
Liquid Crystal Display shows time, day,
heater operation and energy saving mode
status.

Tap
Unique two-way cool touch tap.

Safety features
Integral safety lock.

Approvals
WRAS, CE endorsed.

Warranty
Two-year on site parts and labour. For
full details of the Zip Warranty visit:
www.zipheaters.co.uk/warranty

Exposed plumbing
Connect inlet and vent pipes from below
directly to 15mm compression fittings.

Venting
The vent must discharge to a safe visible
position using a tundish.

Electrical
To be wired to a double pole fused spur
with a minimum break capacity of 13 amps.
Installation must comply with current IEE
regulations.

Caution
In some hard water areas where scale is an
issue we recommend the fitting of the Zip
Inline filter.

Wall mounted instant boiling water
Energy Conservation
The installer can select one of two programmable energy
saving modes –
• Integral 24 hour 7 day timer enables the unit to switch off automatically
during known periods of inactivity e.g. overnight or at weekends, returning
to full functionality ahead of the next expected demand.
Sleep Modes
• Inactivity Sleep Mode. Following a period of 2 hours non-use

Hydroboil Plus automatically enters sleep mode when the unit powers
down allowing the water temperature to gradually reduce to 65˚C, at
which it is maintained. Upon further draw off boiling resumes.

and/or
• Low light Sleep Mode. An integral light detector automatically

activates sleep mode (as above) when room lights are switched off,
returning to normal operation when the next draw off occurs or the
lighting is switched back on.

Zip Hydroboil Plus with cool touch tap an energy saving features
Product Code
Case Finish
s/steel white

HP103

HP003

Capacity
litres

cups* at any
one time

Delivery

Recovery
cups*
per hour

kW@230V

Rating

W x D x H
(mm)

Dimensions

3.0

100

1.5

289 x 180 x 431

HP105

HP005

5.0

140

2.4

318 x 198 x 465

HP107

HP007

7.5

140

2.4

318 x 198 x 578

HP110

HP010

10.0

180

3.0

390 x 244 x 600

HP115

HP015

15.0

180

3.0

390 x 299 x 600

HP125

HP025

25.0

150

180

3.0

390 x 299 x 780

HP140

HP040

40.0

240

2 x 3.0

515 x 284 x 840

* Standard cup size 167ml

Wall mounted instant boiling water

Zip Hydroboil
Wall mounted instant boiling water
®

1.5, 3, 5, 7.5, 10, 15, 25, 40 litre

Heating element

Long-life incoloy sheathed
embedded rod type.
Dry start protection.

Boiling chamber

Twin chamber-stainless steel.
Steam-Heat-Boost technology.
Crevice-free stainless steel with removable
access ports, top and bottom.

Insulation

Compressed high temperature insulation
panels on sizes below 10 litres, engineered
for easy boiling chamber access. High
efficiency aluminium backed mineral wool
insulation on other sizes.

Thermostat
Capillary type.

Case

Stainless steel or corrosion
resistant white enamelled steel.

Tap

Two way, chrome-plated classic,
catering style.

Approvals

WRAS, CE endorsed.

Warranty

Two-year on site parts and labour. For
full details of the Zip Warranty visit:
www.zipheaters.co.uk/warranty

Installation

Install over a draining board, or work top
fitted with a drip tray. Tap spout should
be no higher than is necessary to fill large
pots. Minimum tap height above draining
board for on-wall maintenance is 200mm.

Plumbing

Designed for connection to a potable cold
water supply with a minimum pressure
of 0.7 bar. If pressure exceeds 7 bar,
a pressure limiting valve must be fitted.
An isolating valve should be installed
between the mains supply and the system.

Concealed plumbing

Connect inlet and vent pipes from the rear via
15mm capillary elbows.

Exposed plumbing

Connect inlet and vent pipes from below
directly to 15mm compression fittings.

Venting

The vent must discharge to a safe and
visible position using a tundish.

Electrical

To be wired to a double pole fused spur,
minimum break capacity of 13 amps.
Installation must comply with current IEE
regulations.

Caution

In some hard water areas where scale is an
issue we recommend the fitting of the Zip
Inline filter.

Wall mounted instant boiling water
Zip Hydroboil with Classic tap
Product Code
Case Finish
s/steel white

HS001

Capacity
litres

cups* at any
one time

Delivery

Recovery
cups*
per hour

kW@230V

Rating

W x D x H
(mm)

Dimensions

1.5

100

1.5

289 x 180 x 335

HS003

3.0

100

1.5

289 x 180 x 431

HS105

HS005

5.0

140

2.4

318 x 198 x 465

HS107

HS007

7.5

140

2.4

318 x 198 x 578

HS110

HS010

10.0

180

3.0

390 x 244 x 600

HS115

HS015

15.0

180

3.0

390 x 299 x 600

HS125

HS025

25.0

150

180

3.0

390 x 299 x 780

HS140

HS040

40.0

240

2 x 3.0

515 x 284 x 840

* Standard cup size 167ml

Wall mounted instant boiling water

Zip Econoboil
Wall mounted instant boiling water
®

3 & 5 litre

Heating element
Embedded rod type.

Boiling chamber

Twin chamber in copper.
Steam-Heat-Boost technology.

Insulation

Aluminium backed Tontine.

Thermostat
Capillary type.

Designed for connection to a potable cold
water supply with a minimum pressure of
0.7 bar. If pressure exceeds 7 bar, a
pressure limiting valve must be fitted. An
isolating valve should be installed between
the mains supply and the system.

Concealed plumbing

Connect inlet and vent pipes from the rear
via 15mm capillary elbows.

Exposed plumbing

Case

Corrosion resistant white enamelled steel.

Connect inlet and vent pipes from below
directly to 15mm compression fittings.

Tap

Venting

Approvals

Electrical

Two way, chrome-plated classic, catering
style.
WRAS, CE endorsed.

Warranty

One-year on site parts and labour. For full
details of the Zip Warranty
visit: www.zipheaters.co.uk/warranty

Installation

Plumbing

The vent must discharge to a safe and
visible position using a tundish.
To be wired to a double pole fused spur,
minimum break capacity of 13 amps.
Installation must comply with current IEE
regulations.

Caution

In some hard water areas where scale is an
issue we recommend the fitting of the Zip
Inline filter.

Wall mounted instant boiling water
Zip Econoboil the low cost boiling water solution for locations where economy is of the essence
Product
Code

Capacity
litres

cups* at any
one time

Delivery

Recovery

Rating
kW
@230V

W x D x H
(mm)

Case Finish
s/steel white

cups*
per hour

Dimensions

HS503

3.0

100

1.5

289 x 180 x 431

HS505

5.0

140

2.4

318 x 198 x 465

* Standard cup size 167ml

Wall mounted instant boiling water

Zip Duo
Boiling and chilled filtered water
®

On-wall fixing or counter-mounted on stand provided

Delivery rate

Up to 100 cups of boiling and 35 glasses of
chilled water at a time.

Recovery rate

Up to 217 boiling cups/hour. 90 chilled
glasses/hour.

Case

Stainless steel or corrosion-resistant, white
enamelled steel.

Taps

Two way, classic style catering taps.

T he unit should be positioned either on
a suitable load bearing wall capable of
supporting 42kg - 5 litre, 64kg - 15 litre
or on the counter mounting stand supplied.
The unit must have a minimum 150mm
clearance on the left, 50mm on the right
and 150mm on top.
Minimum tap height, if wall mounted should
be 200mm above work surface. The vent
must discharge to a safe and visible place.

Plumbing

Filtration

The water supply must be potable
(drinkable).

Control panel

If static pressure exceeds 7 bar, a pressure
reducing valve must be fitted. An isolating
valve should be installed between the water
supply and the unit.

Integral 0.2 micron filtration.
For programming sleep mode, timer and
water temperature.

Refrigerant
R134A.

Approvals

CE endorsed.

Warranty

Electrical

To be wired to a double pole switched
fused spur with a minimum break capacity
of 13 amps (3.5kW 15 amp). Installation
must comply with current IEE regulations.

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

HD215 & HD315 should be provided with
their own dedicated supply.

Temperature Settings

In some hard water areas where scale is
an issue we recommend the fitting of the
Zip Professional Range of High Performance
Scale Filters (see page 33).

On installation, to suit user needs, the
boiling water temperature can be adjusted
from 100˚ to 68˚C.

Location

Caution

Wall mounted instant boiling water
Energy Conservation
A choice of two programmable energy saving modes –
• Integral 24 hour 7 day timer to enable the boiling and chilled
units to switch automatically off during known periods of inactivity
e.g. overnight or weekends but return to full functionality ahead of
the next expected demand.
• Inactivity sleep mode enables the boiling water unit to power
down automatically following a period of 2 hours non-use. This
allows the water temperature to gradually reduce to 65˚C, at

which it is maintained. Upon further draw off boiling resumes.

Zip Duo
Product
Code

Case
finish

Delivery

any one time
cups*
glass

Recovery

per hour
cups* glass

Weight
kg
(full)

Rating
kW
@230V

Dimensions
W x D x H
(mm)

HD005

White

120

2.0

650 x 280 x 430

HD105

S/Steel

120

2.0

700 x 350 x 580

HD015

White

100

140

2.3

700 x 350 x 580

HD115

S/Steel

100

140

2.3

700 x 350 x 580

HD215

White

100

217

3.5

700 x 350 x 580

HD315

S/Steel

100

217

3.5

700 x 350 x 580

* Standard cup size 167ml

Wall mounted instant boiling water

Zip Red-E-Boil
Boiling filtered water
®

a solution for locations where an on-wall product is
unsuitable
Features and benefits
Provides water at 96oC.
Can be adjusted if required

•

0.9mm 304 & 316 grade
stainless steel tank

•

304 grade stainless steel
outer case

This product must be earthed.

•

304 grade stainless steel
integral drip tray

The integral drip-tray is designed to
handle small spillages and drips.

•

Status indicator when
heating and ready for use

•

Integral 0.2 micron filtration

•

Over-boil and boil-dry safety
protection

It is recommended where possible
to drain to waste either from the
drip tray using Zip accessory
ZE013 or by ½” BSP connection
at the rear.

•

7 day programmable timer

A minimum 15mm diameter pipe is
required to drain to a safe outlet.

•

Energy saving ECO mode

Caution

•

Programmable filter change
indicator

•

Unique tank baffle plate aids
heat recovery

In some hard water areas where
mineral scale accumulation can
become a problem, consideration
should be given to the maintenance
required.

Installation

Place on a suitable worktop
capable of holding it’s weight
when full. Ensure a minimum
clearance of 50mm around the
product.

Plumbing
Designed for connection to
potable water supply with a
minimum water pressure of 2
bar and a maximum of 7 bar. A
1.6 metre flexible water hose is
provided.

Electrical

•

A 1.7 metre cable fitted with a UK
standard 3 pin plug is provided for
connection to a standard 13 amp
switched outlet.

Drainage

Accessories
ZE013 - Drain Kit
ZT402 - Zip 0.2 micron
replacement filter

Approvals
WRAS approved and CE endorsed.

Warranty
2 years on site parts and labour.
For full details of the Zip Warranty
Scheme visit: www.zipheaters.
co.uk/warranty.

Wall mounted instant boiling water
Product
Code

Capacity
Litres

Heat
up
time
(mins)

Cups
at
one
time

Cups
per
hour

Rating
kW
@230V

Weight
kg
(full)

Dimensions
W x D x H
(mm)

HC110

10.0

168

3.0

28.1

650 x 280 x 430

HC117

17.0

100

168

3.00

38.9

700 x 350 x 580

Wall mounted instant boiling water - Accessories

Zip Accessories
Boiling water

Hydroboil Extra Tap Kits

(tap extension pipework)
ZC100
For 10, 15 and 25 litre heaters, up
to 2 taps (excludes taps).
SP90502

Tap for above.

Inline Filters
FL064

FL104

6” filter for taste and odour removal
with scale reduction.
For use with Hydroboil up to 7.5 litre.

10” filter for taste and odour removal
with scale reduction. For use with
Hydroboil 10 litre and above.

N.B. In areas where hardwater is a problem, we
recommend the Zip Professional filter range - page 33

Mug Racks
ZE010
Stainless steel
(for Classic Tap models only).

ZE011

Stainless steel
(for Hydroboil Plus models only).

Drip Trays
ZD200
Stainless steel (with drain adaptor).

Drip Tray dimensions:
W: 340mm x D: 190mm x H: 20mm with a 19.5mm
drainage access
46

Cup Dispensers
ZE001
Stainless steel.
ZE002
White plastic.

Counter Stands
ZE004
- HS001.
ZE006
- HS003.
ZE007
- HS005, HS105, HP005, HP105
ZE008
- HS007, HS107, HP007, HP107

Tundish
ZD100
ZD101

Wall mounted instant boiling water - Accessories

Zip Accessories
Boiling water

Wall mounted chromed tundish.
Sink mounted chromed tundish.

Universal Mounting Bracket
When a Zip Hydroboil replaces a Heatrae Sadia, Calomax
or Instanta product this bracket may be used to secure
the Hydroboil using existing fixings.
ZP001
ZP002

3 and 5 litre.
7.5 litre.

Zip Water Block
Recommended to be fitted in the water supply line to all
Zip products (except HydroTap) to minimise the potential
damage in the event of leakage.
HE45004

Chilled drinking water

Overview
Chilled, filtered water
Zip
Zip
Zip
Zip
Zip
Zip

HydroTap
FilterTap
ChillTap
Chillmaster
Chill Fountain
Wall Fountain

Zip’s mains fed chillers are designed for the workplace environment, to provide healthy,
fresh filtered drinking water.

Features and benefits

•

Provides drinking water at a fraction of the cost of bottled water.

•

No more bottled water to buy.

•

No more bottled water to store.

•

No more bottled water to handle.

•

No more environmental issues associated with bottled water.

•

No more running out of drinking water during periods of high
demand such as hot weather.

•

Now feature the most technically advanced 0.2 micron filtration system for healthier,
better tasting drinking water.

Chilled drinking water
Good hydration at work

Access to drinking water

Water is a vital nutrient for life. Everybody
wants to be healthy at work and a healthier
workforce leads to improved efficiency.
Even mild levels of dehydration adversely
affect both physical and mental
performance.

The law requires that employers provide
an adequate supply of wholesome drinking
water for all persons in the workplace. This
must be readily available at suitable places.
Drinking water should not be sited where
contamination is likely such as toilet or
washroom facilities.

There is currently no agreement on how
much water we should drink each day
but estimates range from 1.2 to 3 litres
per day.

More information is available from the
Health and Safety Executive by visiting:
www.hse.gov.uk
(Source: www.water.org.uk)

The need for consumption at the top of
these estimates would apply to those
working in hot or dusty environments or
where there is a need to wear protective
clothing.

Chilled drinking water

Zip HydroTap
Filtered chilled water system
®

Features and benefits

Choice options

•

Provides chilled filtered water,
instantly.

C125G4

•

Eliminates the need for expensive
and environmentally damaging
bottled water.

•

Eliminates the need to store or
handle bottled water.

•

Eliminates the fear of running out of
drinking water in extreme weather
conditions or other periods of high
demand.

•

Can be sited at a sink, or away from
it on the optional font and drain.

•

Free-Flow™ facility, ensuring
cold filtered water continues to be
available even when the ‘chilled
glasses per hour’ capacity is
exceeded.

C175G4

Location
Fan-cooled condensor type.

Refrigerant
R134A

Temperature settings
The chilled water temperature is factory set
to deliver water at between 5°C to 14°C.

N.B.
For general installation and specification
details of the HydroTap range see page 10.

Energy Conservation
Programmable operation
•

Integral 24 hour 7 day timer enables the chilled water unit to switch-off automatically during
known periods of inactivity e.g. overnight or weekends, but return to full functionality ahead
of the next expected demand.

G4
C H N O LO G

G4
TECHNOLOGY

OLOGY
CHN
TE

G4
TECHNOLOGY

Chilled drinking water

TECHNOLOGY

N O LO G

Under-counter Zip Command Centre

Product Code

Maximum chilled
glasses/hour

Power rating
kW@230V

Dimensions
W x D x H
(mm)

C125G4

125

0.2

336 x 476 x 335

C175G4

175

0.25

336 x 476 x 335

Chilled drinking water

Zip ChillTap & ChillTap Extra
Commercial
®

Features and benefits
•

Stylish tap.

•

Fingertip control for filling glasses.

•

Hands-free filling for large jugs and bottles.

•

Superior 0.2 micron filtration.

•

Filter change every 12 months.

•

140 glasses per hour.

Zip ChillTap

CT1/140
Chilled filtered water instantly.

Zip ChillTap Extra

CT2/140
Chilled filtered water instantly and cold
(ambient) filtered water.
Shown on optional font—ZT008.

Chilled drinking water
Product Code

Maximum chilled
glasses/hour

Power rating
kW@230V

Dimensions
W x D x H
(mm)

CT1/140

140

0.45

353 x 291 x 385

CT2/140

140

0.45

353 x 291 x 385

Chilled drinking water

Zip Chilltap
Under-sink chiller
®

Filtered drinking water

Features and benefits
•

Approvals
WRAS, CE endorsed.

Great tasting freshly filtered cool
drinking water for fitting on a sink.

Warranty

•

Filters out dirt, rust and other
particles contaminating drinking
water.

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

•

Reduces chlorine and other
offensive water treatment chemicals.

The tap should be:

Installation

•

Delivers up to 140 glasses per hour.

Positioned to the rear of a sink.

•

0.2 micron filtration.

Mounted on a flat surface.

Storage capacity
Nominal 8 glasses.

Output capacity

Up to 140 glasses per hour at <10˚C.

Mounted at 45 degrees to the edge
of the sink so it drains into the sink
when running.
The under-sink chiller must be:

Rating

Located as closely as possible to, and
directly beneath the tap.

Chiller type

Installed with clearances of 50mm left,
right and above, with 65mm to rear.

0.3 kW @ 230V AC.
Fan cooled condenser with a compressor
rated at up to 0.25 hp.

Refrigerant type

Non-toxic R134A.

Under-sink case

Corrosion resistant white enamelled steel.

Filter should be:
Mounted where readily accessible on
the chiller or on the adjacent cupboard
wall.

Plumbing

Sink mounted tap

Water connections 15mm push-fit.

Filtration

If the water pressure is above 7 bar a
pressure reducing valve (AQ3) should be
fitted.

Chrome plated brass with lever action tap
and swivel head.
0.2 micron fully encapsulated externally
mounted double action carbon filter.

Electrical
To be wired to a double pole switched
fused spur with a minimum break capacity
of 13 amps. Installation must comply with
current IEE regulations.

Chilled drinking water
Product Code

Maximum chilled
glasses/hour

Power rating
kW@230V

Dimensions
W x D x H
(mm)

0.45

355 x 290 x 385

Zip Chilltap undersink, sink mounted tap
CH103

140

Chilled drinking water

Zip Chillmaster
Floor standing and wall mounted chiller
®

Filtered drinking water

Features and benefits
•

Great tasting freshly filtered cool
drinking water for high usage and
public access areas.

•

Heavy duty, easy-to-clean stainless
steel bowl and stainless steel case.

•

Filter change reminder light signals
when filter cartridge replacement is
due.

•

Filter cartridges are quick and simple
to change.

•

Submicron filtration.

Storage capacity
Nominal 8 glasses.

Output capacity
140 glasses per hour at <10ºC.

Rating
0.3 kW @ 230V.

Chiller type
Fan cooled condenser with a compressor
rated at 0.25 hp.

Carafe filler
Chrome plated brass lever action tap with
swivel head.

Optional Taps
Bubbler or Push Button (see page 64).

Refrigerant type
R134A.

Case
Brushed finish stainless steel with front
access panel.

Filtration
0.2 micron filtration.
Drain connection 38mm or 43mm
diameter.

Approvals

WRAS, CE endorsed.

BREEAM compliance

The Zip Chillmaster is fully BREEAM
compliant when fitted with ZG500 fitting kit
(see page 65).

Warranty

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

Installation

Water, drainage and power should all be
available nearby.
The chiller should be mounted on a level
surface (levelling feet are provided).
The chiller must be installed with clearances
of 50 mm left, right and 65mm at rear
(except on wall mounted).
The optional kit ZG500, gives BREEAM
compliance by ensuring services are
protected from vandalism and the chiller
securely fixed to the wall and floor.
Wall mounted Chillmaster supplied with 1⁄2”
masonry anchors for use on solid walls only.

Plumbing

Water connections 15mm push-fit.
If water pressure is above 7 bar, a pressure
reducing valve (AQ3) should be used (see
page 84).

Electrical

To be wired to a double pole switched
fused spur with a minimum break capacity
of 13 amps. Installation must comply with
current IEE regulations.

Chilled drinking water
Product Code

Maximum chilled
glasses/hour

Power rating
kW@230V

Dimensions
W x D x H
(mm)

0.45

350 x 350 x 915

0.45

353 x 248 x 369

Zip Chillmaster, floor standing
CH101

140

Zip Chillmaster, wall mounted
CH102

140

Chilled drinking water

Zip Wall Fountain
Recessed chiller
®

Filtered drinking water

Features and benefits
•

Recessed chiller ideal for providing
chilled filtered water where space is
at a premium.

•

Perfect for installing in busy
corridors.

•

0.2 micron filtration.

Storage capacity
Nominal 8 glasses.

The Zip Wall Fountain is fully BREEAM
compliant when installed as per fitting
instructions.

Warranty

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

Installation

The chiller should be recessed into a wall
where it is easy for users to access.

Output capacity

Water, drainage and power should all be
available nearby.

Rating

Integral, removable drip tray can be
plumbed into waste if required.

Rated at 140 glasses per hour at <10ºC.
0.3 kW @ 230V.

Chiller type

Fan cooled condensor with a compressor
rated at 0.25 hp.

Plumbing

Water connections 15mm push-fit.

Refrigerant type

R134A.

If water pressure is above 7 bar a pressure
reducing valve (AQ3) should be used (see
page 84).

Configuration

Electrical

Equipped with carafe filler and bubbler.
Brushed finish stainless steel with lockable
front access panel.

To be wired to a double fused switched
spur, with a minimum breal capacity of 13
amps. Installation must comply with current
IEE regulations.

Filtration

Availability

Case

Complete with 0.2 micron fully
encapsulated double action carbon filter.

Approvals

WRAS, CE endorsed.

BREEAM compliance

Allow 12 week lead time.

Chilled drinking water
Product Code

Maximum chilled
glasses/hour

Power rating
kW@230V

Dimensions
W x D x H
(mm)

140

0.45

635 x 303 x 1670

Zip Wall Fountain
CH104

Chilled drinking water

Zip Chill Fountain
Wall mounted chiller
®

Filtered drinking water

Features and benefits
•

•

The perfect heavy duty solution for
public areas where configurations for
adults, children or wheelchair access
may be necessary.
Bump action electronic controls for
wheelchair usage and lockable front
panels.

•

Heavy duty, easy-to-clean stainless
steel bowls and stainless steel case.

•

Can be configured for adult, child or
wheelchair usage.

•

0.2 micron filtration.

Approvals

WRAS, CE endorsed.

BREEAM compliance

The Zip Chill Fountain is fully BREEAM
compliant when installed as per fitting
instructions.

Warranty

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

Installation

Storage capacity

The chiller should be wall mounted where it
is easy for users to access.

Output capacity

Water, drainage and power should all be
available nearby.

Rating

Integral, removable drip tray can be
plumbed into waste if required.

Nominal 8 glasses.

Rated at 140 glasses per hour at <10ºC.
0.3 kW @ 230V.

Refrigerant type
R134A.

Chiller type

Fan cooled condensor with a compressor
rated at 0.25 hp.

Plumbing

Water connections 15mm push-fit.
If water pressure is above 7 bar, a pressure
reducing valve (AQ3) should be used (see
page 84).

Electrical

Configuration

Can be configured for adult, child or
wheelchair use or any combination of
these.

To be wired to a double pole switched
fused spur with a minimum break capacity
of 13 amps. Installation must comply with
current IEE regulations.

Case

Availability

Brushed finish stainless steel case with
lockable front access panel.

Filtration

Complete with submicron fully encapsulated
double action carbon filter.

Allow a 12 week lead time.

Chilled drinking water
Product Code

Product type
Single bowl

Dimensions (mm)
W x D x H

Zip Chill Fountain - Adult
CH105

140

0.45

500 x 410 x 1140

140

0.45

500 x 410 x 1140

Zip Chill Fountain - Child
CH145

Zip Chill Fountain - Wheelchair
CH115
Product Code

140

0.45

Product type
Double bowl

500 x 410 x 1140
Dimensions (mm)
W x D x H

Zip Chill Fountain - Adult / Adult
CH155

140

0.45

500 x 410 x 1140

0.45

500 x 410 x 1140

0.45

500 x 410 x 1140

0.45

500 x 410 x 1140

0.45

500 x 410 x 1140

0.45

500 x 410 x 1140

Zip Chill Fountain - Child / Child
CH165

140

Zip Chill Fountain - Wheelchair / Wheelchair
CH135

140

Zip Chill Fountain - Adult / Child
CH125

140

Zip Chill Fountain - Adult / Wheelchair
CH175

140

Zip Chill Fountain - Child / Wheelchair
CH185

140

Chilled drinking water

Zip HydroTap
Chilled and chilled sparkling water for
the Home
Delivery rate

Up to 18 glasses of chilled water at a time.

Rating

0.3 kW @ 230V AC.

Chilling system

Fan-cooled condenser type.

Refrigerant
R134A.

Tap head

Chrome plated, die cast tap body with push
and pull levers for electronically controlled
water delivery, integral LED indicators.

Disabled 0ption
Oversize lever taps.

Installation

The tap should be positioned either on
a suitable sink or on a Zip Tap Font. If
installing on a sink, the tap should be
mounted so that it will dispense into the
sink.
The undersink unit should be located
if possible directly beneath the tap and
not more than 1 metre away. It must be
installed with clearances of 50mm left and
right and 65mm at rear.

Plumbing

The water supply must be potable
(drinkable).

Under counter unit

If static pressure exceeds 7 bar, a
pressure reducing valve must be fitted. An
isolating valve should be installed between
the water supply and the under-bench unit.

Control panel

If water pressure is above 7 bar, a pressure
reducing valve (AQ3) should be used (see
page 84).

Houses chilled and filtration systems.
Corrosion resistant white enamelled steel
case, with front access door.
Located on under counter unit to control
timer and water delivery.

Filtration system

Integral triple-action, 0.2 micron,
encapsulated cartridge.

Safety features

Undercounter safe tray with leak detector.

Approvals
CE endorsed.

Warranty

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

Venting

The cupboard containing the chilling unit
must be amply ventilated: cupboard doors
must be offset all round for ventilation,
using buffers provided and the vent fitted
(supplied).

Electrical

To be wired to a double pole switched
fused spur with a minimum break capacity
of 13 amps. Installation must comply with
current IEE regulations.

Energy Conservation
Programmable operation
• Integral 24 hour 7 day timer enables the chilled water unit to switch off automatically
during known periods of inactivity e.g. overnight or weekends but return to full functionality
ahead of the next expected demand.

Chilled drinking water
Tap mounted on sink

Tap mounted on optional font and drain ZT008

Under-counter Zip Command Centre

Product
Code

Chilled
sparkling
water

Chilled
still water

Power rating
kW@230V

Dimensions
W x D x H
(mm)

YES

0.13

280 x 389 x 335

YES

0.30

280 x 389 x 335

HydroTap chilled
DOMC4

HydroTap chilled and sparkling
DOMCS4

YES

Chilled drinking water
64

Chilled Water
For the Home
Features and benefits
•

Fingertip control for filling glasses.

•

Hands-free filling for large jugs and bottles.

•

Superior 0.2 micron water filter.

•

Filter change every 12 months.

Zip ChillTap Sparkling

Zip Filter Tap

•

Chilled filtered water, instantly.

•

Plus chilled filtered sparkling
water, instantly.

Filtered cold (ambient) water.

Zip ChillTap Extra

Zip Font and Drain

•

Chilled filtered water, instantly.

•

Allows siting away from the sink.

•

Plus filtered cold (ambient) water.

•

Connects to waste.

Chilled drinking water
Product
Code

Sparkling
water

Chilled
still water

Ambient
water

Power rating
kW@230V

Dimensions
W x D x H
(mm)

YES

0.245

354 x 248 x 369

YES

0.245

353 x 253 x 377

YES

0.245

353 x 253 x 377

YES

ChillTap Sparkling
DOMCTS
ChillTap Extra
DOMCT1
ChillTap
DOMCT2
Filter Tap
DOMFT1

Chilled drinking water - Accessories

Chilled water
Accessories

ZE001
Stainless steel dispenser for
disposable cups.

ZI001
Optional drinking bubbler.

ZI002
Optional Tap for Chillmaster with push
button dispense.

ZD003
Waste water dish for installation where drainage is not available.

BREEAM
(BRE Environmental Assessment
Method) sets the standard for best
practice in sustainable design and
has become the de facto measure
used to describe a building’s
environmental performance.
The BREEAM Health and Well
Being credit HEA16 (drinking
water) requires chillers to be
installed in compliance with
industry standard.

Chilled drinking water - Accessories

Chilled water
Accessories

ZG500 (right) enables the Zip
Chillmaster to fully comply with
these requirements.

Zip Water Block

HE45004
Recommended to be fitted in the
water supply line to all Zip chilled
products (except HydroTap) to
minimise the potential damage in
the event of leakage.

Hot water

Overview
Energy-efficient water heaters

Zip offers one of the widest and most sophisticated
ranges available in the UK

Instantaneous
•

No standing heat loss, only heats water as required.

•

Unlimited supply of hot water - subject to conditions and demand.

•

Electronic temperature control automatically compensates for
fluctuations in incoming water temperature and pressure.

Choose from:
ES; 2.8, 4.4 & 6.6kW (see pages 70-73).
CEX; 6.6 & 8.8kW (see pages 74-75).
DEX, DEX12 & DBX 18, 21, 24 & 27kW (see pages 76-77).

Unvented
•

Fed directly from cold water mains.

•

Quicker to install with no need for cold water storage cistern.

•

Balanced hot and cold water supplies.

•

High performance showering and faster filling baths.

•

No special taps needed.

Choose from:
Aquapoint, 5 to 100 litres (see pages 80-81 & 86-87).
Varipoint, 10 to 100 litres (see pages 82-83 & 88-89).
AquaFlo, 90 to 300 litres (see pages 90-93).

Open Vented
•

Easy to install.

•

Single point of use.

•

Overbasin and underbasin variants.

•

Overbasin includes spout and valve.

•

Underbasin requires vented taps.

Choose from:
Tudor, 5 & 10 litres (see pages 94-95).
Contract, 5 & 10 litres (see pages 96-97).

Cistern Fed Storage
•

Can serve multiple outlets.

•

Can be installed in ceiling voids.

•

Reliable, ‘fit and forget’ solution.

Choose from:
RCH, 25 to 100 litres (see pages 98-99).
68

Hot water

Zip InLine
instantaneous water heating
The inside story

Why Zip InLine
instantaneous water
heating?
Zip InLine instantaneous water heaters are
the most energy efficient way of directly
heating water electrically.
Using the very latest German technology,
Zip InLine offers a host of Specifier, Installer
and End User benefits:
•

Energy efficiency

Zip InLine saves energy by:
•

Heating only the water drawn off.

•

Avoiding stored water heat losses.

When comparing the energy used over 24
hrs to deliver 75 litres of water at 38°C
(assuming 12°C supply) typical savings of
23% can be achieved.

•

Unrivalled energy efficiency
Product
Energy Usage
- no standing heat loss.
15
litre
storage
water
heater
3.0kWh
Sophisticated electronic control.

•

Unlimited hot water supply.

•

Easy to install.

•

Compatible with standard tapware.

•

Neat compact design.

•

Tangible water savings.

Zip InLine

2.3kWh

N.B. Percentage savings may be less with
increased demand but more during periods
without draw off.

Hot water
Bare wire technology

The Zip ES, CEX, DEX and DBX models
feature bare wire heating technology using
stainless steel elements directly immersed
in the water flow path.This system achieves
maximum efficiency by means of direct
contact with the water flow plus the fastest
possible heat up times.

Unlimited supply of hot water
* Zip InLine will deliver a continuous supply at
the selected temperature.

Easy installation

Zip InLine products simply connect to
standard closed outlet taps without the need
for unvented water controls.

Smart design

The unit’s compact size enables it to fit
neatly and unobtrusively in any location.

Water conservation

Zip InLine is designed for installation close
to the point of use, avoiding the need
for water to be run off before achieving
temperature.
Savings per draw off compared to
centralised systems with long pipe runs are
as follows:

Traditional system
pipe run 15mm
10 metres

Litres saved
per draw off
3.2

* Subject to sufficient power being available to achieve the required
temperature and outlet flow under local conditions.

Hot water

Zip InLine ES
Electronic instantaneous
water heater
®

Single outlet for hand washing
Features and benefits
•

Compact electronically controlled
instantaneous water heater for hand
washing.

IP 25.

Product Selection

Instantaneous water heating is the most
efficient available, however, delivered
water temperature is dependent on local
incoming water temperature and supply
voltage. Quoted performance assumes
12°C incoming water temperature and
230V supply.

•

Bare-wire for fast heat up.

•

Innovatively designed appliance that
heats the water automatically as it
flows through.

•

No standing heat losses.

•

Heating power automatically adjusted
to compensate for variable inlet
pressure and temperature.

Impact resistant plastic.

•

Supplied with 700mm of pre-wired
cable.

•

Outlet temperature factory set to
38°C, but can be installer adjusted
between 30°C to 43°C.

•

Intended for use with taps having
removable M22/M24 nozzles.

Taps - Important.
For correct operation, it is
essential that the special
tap nozzle supplied is
fitted to the tap spout.
Nozzles supplied to suit
M22/24 taps should be used.

•

External flow regulation.

•

Easier servicing.

•

Easy to install with re-designed,
improved wall bracket.

Operation

Heating power is switched on automatically
once the minimum flow rate is exceeded.

Rating

ES3 2.8kW @230V
ES4 4.4kW @230V
ES6 5.5kW @230V

Heating system

Bare-wire heating system for fast response.

Safety feature

Water temperature electronically controlled
to maintain factory setting of 38°C.

Temperature setting

Temperature and flow adjustable at time of
installation.

IP rating

Case

Approvals

WRAS, VDE, CE endorsed.

Warranty

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

Location

The appliance must be installed in a frost
free environment.

Plumbing

The appliance is intended for connection
to the mains water supply. It should be
installed by a suitably qualified person. The
appliance may be used as an unvented or
vented installation. N.B. Not recommended
for use with thermostatic mixing valves
or taps.

Electrical

The appliance must be earthed and
connected to the supply by means of
permanent wiring through suitable isolation
having a contact separation of at least 3mm
in all poles. Installation must comply with
current IEE regulations.

Hot water
T

Technical Data echnical Data

Maximum temperature increase @230V and
a flow rate of:

ES3

ES4

ES6

2.0 litres/min

20K

31K

39K

2.5 litres/min

16K

25K

31K

3.0 litres/min

13K

21K

26K

3.5 litres/min

11K

18K

22K

4.0 litres/min

10K

16K

20K

Switch on flow rate (l/min)

1.2

1.5

Switch off flow rate (l/min)

1.0

1.3

Product
Code

Product

Power
rating
kW@230V

*38OC Max
Flow rate
ltrs/min

Dimensions
W x D x H
(mm)

ES3

Zip InLine instantaneous

2.8

1.5

187 x 80 x 132

ES4

Zip InLine instantaneous

4.4

2.4

187 x 80 x 132

ES6

Zip InLine instantaneous

5.5

3.0

187 x 80 x 132

Hot water

Zip InLine ES
Instantaneous hand wash packs –
complete with heater, tap & fittings
®

These new packs provide the installer with the
ES heater, compatible tap and a comprehensive
plumbing kit including flexible hoses and fittings to
ensure quick and easy system installation.
The packs are offered in a choice of 3 power ratings
with non-concussive or mixer tap.
Non-concussive (NC) pack:
•

ES instantaneous water heater.

•

Non-concussive single outlet tap.

•

50cm flexible hose for connection to heater.

•

50cm flexible hose for connection to tap.
(Isolating valve NOT supplied).

Mixer Tap (MT) pack:

Optional matching cold taps
available

•

ES instantaneous water heater.

•

Single lever mixer tap complete with braided hoses.

•

50cm braided hose for connection to heater.

•

Flow rate adjuster for cold supply to tap.

•

Non-return valve for hot supply to tap.

•

Tee piece connector.

(Isolating valve NOT supplied).
Approvals

WRAS, VDE, CE endorsed.

Product
Code

Tap Type

Rating
kW @ 230V

ES3/NC
ES4/NC
ES6/NC
ES3/MT
ES4/MT
ES6/MT
ZL018

Non-concussive

2.8

1.5

Non-concussive

4.4

2.4

Non-concussive

5.5

3.0

Single lever mixer

2.8

1.5

Single lever mixer

4.4

2.4

Single lever mixer

5.5

3.0

Matching non-concussive cold tap

38˚C Max Flow Rate
ltrs/min

Hot water

NC Pack (non-concussive tap)

Isolating
valve

MT Pack (mixer tap)

Isolating
valve

Flow rate
adjuster

Non
return
valve

Hot water

Zip InLine CEX
Over and Undersink Electronic
Instantaneous Water Heaters for
Single or Multiple Outlets
®

Features and benefits
•

The most energy efficient way
of heating water electrically.

•

Highly efficient bare wire heating
system.

•

Zero standing heat loss as no stored
water.

•

Instant hot water.

•

Provides a constant* supply of hot
water at exactly the temperature
selected.

•

Heating power adjusted electronically
to compensate for variable inlet
pressures and temperatures.

•

Required temperature can be set
using two touch sensitive keys within
the range 30°C to 55°C with digital
display.

•

Maintains precise temperature
control despite fluctuations in
voltage and water pressure.

•

Suitable for use with preheated water
from solar systems.

•

Power rating can be selected at time
of installation.

•

Optional wireless control (ZL016).

•

CEX-O for oversink CEX-U
for undersink installation.

Approvals

WRAS, VDE & CE endorsed.

Warranty

1 year on site parts and labour. For full
details visit: www.zipheaters.co.uk/warranty

Location

The appliance must be installed in a frost
free environment.
In order to minimise thermal losses the
distance between the appliance and the
outlet fitting should be as short as possible.

Plumbing

The appliance is intended for connection to
a mains potable water supply. The specific
water resistance of the supply must not
fall below the minimum specified on the
rating plate.
Minimum flow rate 2 litres/min.
Should be installed by a suitably qualified
installer of electric instantaneous water
heaters.

Electrics

The appliance must be earthed and to
connected to the supply by means of
permanent wiring through an isolation switch
having a contact separation of at least 3mm
on all poles and protected by a suitably
rated circuit breaker.

Ratings

The cross sectional area of the connection
cable must be in accordance with the power
rating of the appliance.

Heating System

The installation must be in accordance with
current IEE regulations.

6.6kW/8.8kW. Selected at installation.

Bare-wire system.

IP Rating

Oversink IP25 Undersink IP24
Suitable for Zone 1.

* Subject to a minimum water pressure of 2 bar and maximum of 10 bar

Hot water
CEX-U

CEX-O

Technical Data
Maximum temperature increase @230V and a flow rate of:

3.0 litres/min

31K- 42K

3.0 litres/min

24K- 31K

3.0 litres/min

19K- 25K

3.0 litres/min

16K- 21K

Switch on flow rate (l/min)

Product
Code

Power
rating
kW@230V

CEX-O

6.6 - 8.8

CEX-U

6.6 - 8.8

2.0

50OC Max
Flow rate
ltrs/min

38OC Max
Flow rate
ltrs/min

Temperature
setting
range
(oC)

Dimensions
W x D x H
(mm)

2.5 - 3.3

1.5

30 - 55

177 x 108 x 294

2.5 - 3.3

2.4

30 - 55

177 x 108 x 294

Hot water

Zip InLine DEX, DEX12 & DBX
Electronic Instantaneous Water
Heaters for Single or Multiple Outlets
®

Features and benefits
All models

IP Rating

•

The most energy efficient way
of directly heating water electrically.

Approvals

•

Highly efficient bare wire heating
system.

•

Zero standing heat loss as no stored
water.

•

Instant hot water.

•

Provides a constant* supply of hot
water at exactly the temperature
selected.

•

Heating power adjusted electronically
to compensate for variable inlet
pressures and temperatures.

•

Maintains precise temperature
control despite fluctuations in
voltage and water pressure.

•

Optional remote control temperature
selection (using ZL017).

DBX:

Outlet temperature set to 50°C adjustable
inside the appliance from 30°C to 60°C.

DEX:

If required, two temperature settings can
be set using the touch sensitive keys
within the range 20°C to 60°C. (20°C to
55°C for DEX12) with digital display of the
selected temperature.
Suitable for use with preheated water from
solar systems (not DEX12).
Power rating can be selected at time of
installation.

Ratings

DEX12 8.8-11kW (adjustable)
DEX 18-27kW (adjustable)
DBX 18kW, 21kW, 24kW & 27kW.

Heating System
Bare-wire system.

IP 25 - Suitable for Zone 1

WRAS, VDE & CE endorsed.

Warranty

1 year on site parts and labour. For full
details visit: www.zipheaters.co.uk/warranty

Location

The appliance must be installed in a frost
free environment.
In order to minimise distribution losses the
distance between the appliance and the
outlet fitting should be as short as possible
(less than 2m).

Plumbing

The appliance is intended for connection to
a mains potable water supply. The specific
water resistance of the supply must not
fall below the minimum specified on the
rating plate.
Minimum flow requirements:
2 litres/min.
Should be installed by a suitably qualified
person.

N.B. Not recommended for use with
thermostatic mixing valves or taps.
Electrical

The appliance must be earthed and
connected to the supply by means of
permanent wiring through an isolation
switch having a contact separation of at
least 3mm on all poles and protected by a
suitably rated circuit breaker.
The cross sectional area of the connection
cable must be in accordance with the power
rating of the appliance.
The installation must be in accordance with
current IEE regulations.

* Subject to a minimum water pressure of 2 bar and maximum of 10 bar

Hot water
DBX
DEX12

DEX

DEX
DBX18

DBX21

DBX24

DBX27

Temperature adjustment range
7.5ºC- 55ºC

30ºC- 60ºC

20ºC- 60ºC

Maximum inlet temperature
25ºC

30ºC

70ºC

Maximum flow rate (litres/min)
5.0

8.0

7.0

8.0

9.0

Pressure loss @ 2.5 l/min
0.2 bar

Pressure loss @ 9.0 l/min
1.3 bar

Product
Code

DEX12

Power rating kW

500C Max
Flow rate
ltrs/min

38OC Max
Flow rate
ltrs/min

Dimensions
W x D x H
(mm)

8.8 - 11.0*

3.3 - 4.1

4.8 - 6.1

231 x 97 x 466

18.0** - 27.0***

6.8

9.8 

231 x 97 x 466

DBX18

18.0**

6.8

9.8 

231 x 97 x 466

DBX21

21.0**

7.9

11.4 

231 x 97 x 466

DBX24

24.0**

9.0 

13.0 

231 x 97 x 466

DBX27

27.0***

10.2 

14.8 

231 x 97 x 466

DEX

* 1/N/PE 230V ** 3/PE 280-4150V *** 3/PE 400V
 mixed with cold water at the tap
79

Hot water

Zip InLine
Instantaneous water heating
Instantaneous flow and temperature rise chart

Single Phase
60
ES3
ES4
ES6
CEX (6.6kW)
CEX (8.8kW)
DEX12

Delivered Temp (˚C) with 12˚C ambient

55
50
45
40
35
30
25
0.0

1.0

2.0

3.0
4.0
Flow Rate (l/min)

5.0

6.0

7.0

Three Phase
65
DEX/DBX (18kW)
DEX/DBX (21kW)
DEX/DBX (24kW)
DEX/DBX (27kW)

Delivered Temp (˚C) with 12˚C ambient

60
55
50
45
40
35
30
5.0
6.0
7.0
Flow Rate (l/min)

8.0

9.0

10.0

11.0 12.0 13.0 14.0
mixed with cold water at the outlet

15.0

Hot water

Zip InLine
Accessories
Optimum performance
For the best results from the Zip InLine products the following tap
spray nozzles, handsets and remote control should be used.

Tap spray nozzle
Code
ZL002
ZL003

Type
22mm female thread
24mm male thread

Tap aerator
ZL008
ZL004
ZL005

nozzle
15mm insert
22mm female thread
24mm male thread

Flow rates
2.0 litres/min
2.0 litres/min
3.5 litres/min (ES6)
3.5 litres/min
3.5 litres/min

Shower hand set
ZL006
Fixed pattern

4.0 litres/min

Shower hand set
ZL007
4 mode adjustable

4.0 litres/min

Touch-free taps for use with Zip InLine
1 Long reach basin/sink tap
1

TF001—Mains powered
TF002—Battery powered
2 Standard reach basin/sink tap
TF003—Mains powered
TF004—Battery powered

3 Tubular wall mounted tap

TF005—Battery powered
TF006—Mains powered

4 Tubular deck mounted tap

TF007—Battery powered
TF008—Mains powered

5 Pillar tap
TF009—Dual powered

6 Remote control
7

TF100 for 3, 4 & 5

7 Remote control
ZL016 for CEX
ZL017 for DEX

8 Installation Frame
ZL020 for DEX & DBX
81

Hot water

Zip Aquapoint III
Unvented water heater
®

Single or multiple outlets
5, 10, 15 litre
Undersink and Oversink
Features and benefits

Glass lines steel inner container
tested to 12 bar

•

Sacrificial anode for protection
against corrosion.

Expansion relief valve (supplied) set at 6
bar.

•

Element ‘ON’ neon indicator.

•

External temperature control with
frost protection.

Sacrificial anode for added protection
for element and tank in aggressive water
conditions, requiring regular inspection and
replacement when necessary.

•

Oversink and Undersink versions
available. 5, 10 & 15 litre.

Capacities

Manually resettable over temperature safety
cutout.

Installation

Separate models available for oversink and
undersink installation.

5 litre, 10 litre, 15 litre.

All models can be wall mounted.

Rating

Undersink units can be installed
unsupported on the floor if required.

Heating element

All models can supply one outlet or multiple
outlets, subject to capacity, without the
need for special taps.

2.0 kW @ 230V.
Embedded rod type.

Thermostat

Capillary type adjustable from 7ºC to 75ºC.

Plumbing

Case

Water connections 1⁄2” BSP
Expansion relief valve (supplied) set at
6 bar. Should be installed only by a suitably
experienced installer of unvented electric
storage water heaters.

Insulation

Oversink and undersink models not
interchangeable.

Water tank

1.8 mm glass enamelled steel tested to
12 bar.
High impact resistant white plastic.
High density, CFC-free polyurethane foam.

IP rating

Electrical

WRAS, CE endorsed.

To be wired to a double pole switched
fused spur with a minimum break capacity
of 13 amps. Installation must comply with
current IEE regulations.

Warranty

Supplied with 1 metre of pre-wired cable.

24.

Approvals

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

Safety features

•

Hot water
Oversink

Product
Code

Power rating
kW@230V

Undersink

Capacity
Litres

Thermal
Loss
kWh/day

Dimensions
W x D x H
(mm)

Zip Aquapoint II Oversink
AP3/05/OB

2.0

5.0

0.35

256 x 260 x 376

AP3/10/OB

2.0

10.0

0.48

350 x 265 x 480

AP3/15/OB

2.0

15.0

0.62

350 x 310 x 480

Zip Aquapoint II Undersink
AP3/05

2.0

5.0

0.35

256 x 260 x 376

AP3/10

2.0

10.0

0.48

350 x 265 x 480

AP3/15

2.0

15.0

0.62

350 x 310 x 480

Hot water

Zip Varipoint II
Unvented water heater
®

Single or multiple outlets
10, 15 litre
Undersink & oversink
Features and benefits

Safety features

•

Pressure and temperature relief valve
supplied.

•

Heavy guage copper inner container
tested to 16 bar.
Five year warranty on inner
container, two years on controls.
Does not require an anode or regular
inspection.Supplied with temperature
and pressure relief valve.

•

Oversink and undersink versions
available 10 litre or 15 litre.

•

External temperature control with
frost protection setting.

•

Element ‘ON’ neon indicator.

•

Supplied complete with wall
mounting bracket.

Capacities
10 litre, 15 litre.

Rating

2.2 kW @ 230V.

Expansion relief valve supplied, set at 6 bar.
Frost protection setting.

Installation

Separate models available for oversink and
undersink installation.
All models can supply one or more outlets.
No special taps required.
Undersink is floor standing or wall hung on
bracket (supplied).
Oversink is wall hung, on bracket (supplied).

Plumbing

Water connections 1⁄2” BSP.
Pressure and temperature relief valve
(supplied) should be fitted to heater.

Heating element

Pressure relief valve (supplied) to be fitted in
cold water supply.

Thermostat

Should be installed only by a suitably
experienced installer of unvented electric
storage water heaters.

Water tank

Oversink and undersink models not
interchangeable.

Embedded rod type.

Capillary type adjustable up
to 75ºC.
Heavy gauge copper, pressure tested to
16 bar.

Case

Electrical

High density, CFC-free polyurethane foam.

To be wired to a double pole switched fused
spur with a minimum break capacity of 13
amps. Installation must comply with current
IEE regulations.

IP rating

Supplied with 1 metre of pre-wired cable.

High impact resistant white plastic.

Insulation

24.

Approvals

WRAS, CE endorsed.

Warranty

Five year on site parts and labour warranty
on inner container, two years on controls.
For full details of the Zip Warranty Scheme
visit: www.zipheaters.co.uk/warranty

Manually resettable over temperature
cut-out

Hot water
Underrsink

Product
Code

Power rating
kW@230V

Oversink

Capacity
Litres

Thermal
Loss
kWh/day

Dimensions
W x D x H
(mm)

Zip Varipoint II Oversink
VP103

2.2

10.0

0.36

300 x 285 x 452

VP153

2.2

15.0

0.50

300 x 285 x 452

Zip Varipoint II Undersink
VP103UB

2.2

10.0

0.41

300 x 285 x 452

VP153UB

2.2

15.0

0.58

300 x 285 x 452

Hot water

Zip Accessories
Unvented water heating
5, 10 & 15 litre capacity

AQ2

AQ3

Expansion vessel
and check valve
(3.5 bar)

Combined pressure
reducer (set at 3.5
bar) and line strainer

Varipoint & Aquapoint
Unvented Accessory Selection
Will the pipework accommodate expanded water without hot water entering any supply
pipe connected to a cold water draw-off? (See diagram A opposite and note minimum
pipe lengths). If expansion in the cold water main is restricted, e.g. by a valve or meter,
an expansion vessel and other relevant accessories MUST be fitted.

YES

NO
YES

Is reverse flow prevented, e.g. by a valve or meter?

Is the mains pressure 4.0 bar or less?

YES

Fit AQ2 + AQ3

Fit AQ2

Fit AQ2 + AQ3

NOT REQUIRED

Additional Accessories
AQ1
Pressure and temperature relief valve (7 bar/90ºC).
Provides additional levels of safety when fitted to water
heater as shown in Diagram D.
Note: Varipoint supplied complete with AQ1.
Order AQ1 separately for use with Aquapoint.
AQ1
AQ4 TMV2
Thermostatic blending valve complete with 2 check valves. (Set temp range
30º to 65ºC).
AQ4S TMV3
AQ4

NHS Approved Thermostatic Blending Valve complete with 2 check valves.
(Set temp range 30º to 50ºC).
These blending valves provide over temperature protection and are also
ideal for extending system capacity.

Hot water

Zip Accessories
Unvented water heating
5, 10 & 15 litre capacity
Diagram A

Inlet pressure less than 4 bar and expanded hot water can be accommodated in the pipe work.

Minimum length of pipe – Length ‘A’
Capacity
5 litres
10 litres
15 litres

15mm pipe
1.37m
2.7m
4.2m

22mm pipe
0.6m
1.2m
1.8m

Diagram B

Inlet pressure less than 4 bar but expanded hot water cannot be accommodated in the pipe
work. (Install AQ2 expansion vessel and check valve).

Diagram C

Inlet pressure greater than 4 bar. (Install AQ2 expansion vessel and check valve with AQ3
pressure reducer).

Diagram D

Temperature and pressure relief valve (AQ1)

Hot water

Zip Aquapoint III
Unvented water heater
®

Multiple outlet 30, 50, 80 & 100 litre
Features and benefits
•

Glass lined steel inner container
tested to 13 bar.

•

Sacrificial anode for protection
against corrosion.

•

Element ‘ON’ neon indicator.

•

External temperature control with
frost protection.

•

High performance foam insulation.

•

Factory fitted P&T valve.

•

Element replacement can be carried
out without draining.

WRAS, CE endorsed.

Safety features

Manually resettable safety cutout.
Heater protected against freezing while
power switched on.
Factory fitted pressure and temperature
relief valve designed to operate at 7 bar
and 90ºC.
Expansion relief valve set to operate at
6 bar.

Installation

Accessories (supplied)

For installation by a qualified installer in
accordance with all national and local
Building Regulations.

Expansion relief and single check valve set
to 6 bar.

Intended for wallmounting – please ensure
that the wall and fixings are strong enough
to take the weight of the water heater
when full.

Pressure reducing valve set to 3.5 bar and
line strainer.

Pressure and temperature relief valve set to
7 bar and 90ºC.
External expansion vessel pre-charged to
3.5 bar.

Tundish and wall brackets.
Capacities

30 litre, 50 litre, 80 litre, 100 litre.

Rating
3.0 kW @ 230V.
Heating element
Dry pocketed tubular.

Thermostat

Capillary type adjustable
20ºC to 75ºC.

Inner container

1.8mm glass enamelled steel tested to
13 bar.

Case

Corrosion resistant white enamelled steel.

Insulation

High density, CFC-free polyurethane foam.

Warranty

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

Approvals

Plumbing

Water connections 1⁄2” BSP.
Minimum recommended water pressure
1 bar.
Unit supplied with full installation kit
comprising: expansion vessel, pressure
reducing valve, balanced take off, expansion
relief valve (6 bar), line strainer, tundish and
wall brackets.
P&T and expansion relief valves require
plumbing to waste in accordance with water
authority bylaws.
Sacrificial anode for added protection for
element and inner container in aggressive
water conditions – requires regular
inspection and replacement when
necessary.

Electrical

To be wired to a double pole switched fused
spur with a minimum break capacity of 13
amps. Installation must comply with current
IEE regulations.
Element can be changed without draining
down.

Hot water
Product
Code

Capacity
Litres

Weight
Full (kg)

Thermal
Loss
kWh/day

Dimensions
W x D x H
(mm)

AP3/30

30.0

0.65

420 x 445 x 525

AP3/50

50.0

0.68

420 x 445 x 690

AP3/80

80.0

108

0.94

420 x 445 x 950

AP3/100

100.0

131

1.10

420 x 445 x 1125

Zip Aquapoint II

Hot water

Zip Varipoint III
Unvented water heater
®

Multiple outlets
30, 50, 80,100 litre
Features and benefits
Heavy gauge copper inner container, tested
to 12 bar.
Five year warranty on inner container, two
years on controls.

High density, CFC free polyurethane foam.

Warranty

Does not require an anode or regular
inspection.

Five-year on site parts and labour warranty
on inner container, two years on controls.
For full details of the Zip Warranty Scheme
visit: www.zipheaters.co.uk/warranty.

Supplied with factory fitted P&T valve and
full installation fitting kit.

Safety features
Manually resettable safety cutout.

External temperature control.

Heater protected against freezing while
power switched on.

Element ‘ON’ neon indicator.
High performance foam insulation.

Accessories (supplied)

Factory fitted pressure and temperature
relief valve designed to operate at 7 bar
and 90ºC.

Pressure reducing valve set to 3.5 bar and
line strainer.

Expansion relief valve set to operate at
6 bar.

Pressure relief valve set to 6 bar and single
check valve.

Installation

Pressure and temperature relief valve set to
7 bar and 90ºC.
External expansion vessel pre-charged to
3.5 bar.
Tundish and wall brackets.
Tee piece and drain valve.

Expansion vessel capacity
VP303/VP505 = 5 litre
VP803/VP953 = 8 litre

Capacities

30 litre, 50 litre, 80 litre, 100 litre.

Rating

2.7 kW @ 230V.

Heating element

Replaceable embedded rod type.

Thermostat

Capillary type adjustable
37ºC to 75ºC.

Inner container

Heavy gauge copper tested to 12 bar.

Case

Corrosion resistant white enamelled steel.

Insulation

For installation by a qualified installer in
accordance with all national and local
Building Regulations.
Intended for wallmounting – please ensure
that the wall and fixings are strong enough
to take the weight of the water heater
when full.

Plumbing

Electrical

To be wired to a double pole switched fused
spur with a minimum break capacity of 13
amps. Installation must comply with current
IEE regulations.

Hot water
Product
Code

Capacity
Litres

Weight
Full (kg)

Thermal
Loss
kWh/day

Dimensions
H x Diameter
(mm)

VP303

30.0

0.732

620 x 430

VP503

50.0

0.912

808 x 430

VP803

80.0

107

1.032

946 x 485

VP953

100.0

133

1.207

1091 x 485

Zip Varipoint III

Hot water

Zip AquaFlo II
Unvented water heater
®

Unvented stainless-steel cylinders
90 to 300 litre capacity
Features and benefits

Construction

•

Wide range of capacities from 90
litres up to 300 litres.

• Direct, indirect and solar compatible
unvented water heaters.

•

High grade Duplex Stainless Steel
Unvented Cylinder for long life.

• Corrosion resistant Duplex Stainless Steel
cylinder.

•

Incoloy immersion elements provide
excellent corrosion resistance.

• High performance, low profile coil-in-coil
heat exchanger.

•

Titanium replacement elements
available for high use applications.

• High performance CFC free injected
polyurethane foam insulation.

•

Compact coil-in-coil heat exchangers
provide fast heat up and recovery.

• White plastic coated steel case resistant
to scuffs and damage.

•

Multi-element options for faster heat
up.

• External expansion for reliability and ease
of maintenance.

•

High performance insulation ensures
minimum heat loss.

• Cylinder pressure tested to 15 bar.

•

External expansion for optimum
reliability, more usable space and
ease of maintenance.

•

No sacrificial anode. Avoids the need
for regular inspection.

•

22mm compression connections for
ease of installation.

Nominal Capacity

•

Cylinders tested to 15 bar.

Direct and Indirect units: 90, 120, 150,
180, 210, 250 and 300 litres.

•

25 year transferable cylinder warranty.

Installation
For installation by a qualified installer in
accordance with all national and local
Building Regulations.
Intended for floor standing only – refer to
Technical Data for weight when full.

Solar Twin Coil and Solar Direct units: 150,

• 2 year warranty on all other components.

180, 210, 250 and 300 litres.

• Fully approved to UK Water Regulations
and Buildings Regulations Part G3
and Part L.

Incoloy construction 1¾” thread. Length
14” Loading 3kW @ 240V.

Immersion Elements

Heat Exchanger

22mm low profile, high efficiency stainless
steel coil-in-coil.

Hot water
Controls

Thermostat – adjustable up to 65°C.
Over temperature safety cut-out –
Re-settable. Operates at 85°C.
Expansion relief valve – 6 bar.
Temperature and pressure relief valve –
90°C and 7 bar.
Tundish.
Two way valve with indirect models.
Pressure reducing valve – 3 bar.
Expansion vessel – Pre-charged to 3 bar.

Plumbing

For connection to 22mm mains potable
water supply.

Electrical

To be wired to a suitably rated double pole
fused spur.
Installation must comply with current IEE
regulations.

Approvals

KIWA approved to UK Water Regulations.
KIWA approved to UK Building Regulations
Part G3 and Part L.
Immersion element/thermostat BEAB
approved and CE endorsed.

Warranty

25 years on cylinder transferable
(conditions apply).
2 years on all other components.

Minimum water supply 1.5 bar, 20 l/min.
Maximum water supply pressure 12 bar.

Hot water

Zip AquaFlo II
Unvented water heater
®

Unvented stainless-steel cylinders
90 to 300 litre capacity
AquaFlo Direct
Product
Code

AF3090
AF3120
AF3150
AF3180
AF3210
AF3250
AF3300
AF3150S*
AF3180S*
AF3210S*
AF3250S*
AF3300S*

Nominal
Capacity
(L)

Height
(mm) x
545 Dia

Weight
Empty
(kg)

Weight
when Full
(kg)

Vol within
10ºC of set
temp (L)

Heat up
3kW
(mins)

90
120
150
180
210
250
300
150
180
210
250
300

727
915
1102
1290
1478
1728
2041
1102
1290
1478
1728
2041

21
26
33
38
41
46
55
33
38
41
46
55

111
146
183
218
251
296
355
183
218
251
296
355

73
102
133
163
194
236
288
133
163
194
236
288

76.0
103.0
134.0
164.0
203.0
248.0
323.0
134.0
164.0
203.0
248.0
323.0

* Supplied with 3 elements and 4 bosses - 3 at low level and 1 at high level.

AquaFlo Indirect
Product
Code

Nominal
Capacity
(L)

Height
(mm) x
545 Dia

Weight
Empty
(kg)

Weight
when Full
(kg)

Vol within
10ºC of set
temp (L)

AF4090
AF4120
AF4150
AF4180
AF4210
AF4250
AF4300

90
120
150
180
210
250
300

727
915
1102
1290
1478
1728
2041

23
30
38
42
45
51
60

111
148
186
220
253
299
357

74
105
132
160
188
232
285

AquaFlo Solar Compatible
Product
Code

Nominal
Capacity
(L)

Solar Twin Coil
AF5150
AF5180
AF5210
AF5250
AF5300
Solar Direct
AF6150
AF6180
AF6210
AF6250
AF6300

Height
(mm) x
545 Dia

Weight
Empty
(kg)

Weight
when Full
(kg)

Vol within
10ºC of set
temp (L)

Indirect Heat
Exchanger
(kW)

150
180
210
250
300

1102
1290
1478
1728
2041

40
45
48
53
63

187
222
255
300
359

132
160
188
232
285

18.55
18.55
22
22
22

150
180
210
250
300

1102
1290
1478
1728
2041

38
42
45
51
60

186
220
253
299
358

102
123
143
175
210

Actual performance when installed will vary considerably dependant
on the rate of solar or other renewable input, number of panels etc.

Hot water
Heat up
6kW
(mins)

Heat up
9kW
(mins)

Boost
re-heat
(mins)

Low level
immersion
elements

High level
immersion
elements

Standing
Loss
(kWh/day)

73
88
108
130
168

57
67
80
95
120

58.0
72.0
82.0
96.0
117.0
145.0
72.0#
82.0#
96.0#
117.0#
145.0#

1
1
1
1
1
1
1
3 or 2
3 or 2
3 or 2
3 or 2
3 or 2

0
1
1
1
1
1
1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1

1.07
1.23
1.41
1.53
1.80
2.15
2.28
1.41
1.53
1.80
2.15
2.28

Additional elements are available for installation in the 4th boss.

# If using high level element

Indirect Heat
Exchanger
(kW)

Recovery
Indirect
(mins)

Boost
re-heat
(mins)

Low level
immersion
elements

High level
immersion
elements

Standing
Loss
(kWh/day)

16.46
16.46
18.55
18.55
18.55
22.00
22.00

12.0
16.0
17.2
20.4
22.0
25.0
34.0

117.0
145.0

1
1
1
1
1
1
1

0
0
0
0
0
1
1

1.07
1.23
1.41
1.53
1.80
2.15
2.28

Solar
Heat
Exchanger

Dedicated
Solar
Capacity

Recovery
solar
(mins)

Boost
re-heat
(mins)

Low level
immersion
elements

High level
immersion
elements

Standing
Loss
(kWh/day)

16.46
18.55
18.55
22.00
22.00

77
95
101
107
121

25.0*
26.3*
31.2*
33.0*
41.0*

12.0#
14.8#
15.5#
20.0#
25.0#

0
0
0
0
0

1
1
1
1
1

1.41
1.53
1.80
2.15
2.28

16.46
18.55
18.55
22.00
22.00

80
100
116
137
160

25.0*
26.3*
31.2*
33.0*
41.0*

72.0
82.0
96.0
117.0
145.0

1
1
1
1
1

1.41
1.53
1.80
2.15
2.28

* Re-heat times based on BS12897 parameters with an 80°C primary flow at 15 l/min.
# Using Indirect heat exchanger

Hot water

Zip Tudor II
Over-sink or under-sink water heater
®

Open outlet for single point of use
5, 10 litre
Features and benefits
•
•
•
•
•
•
•
•
•
•
•

Open outlet heater, for single point
of use.
Externally adjustable temperature
control with frost protection.
Manually re-settable cut-out.
Oversink models supplied complete
with spout and valve.
Undersink models for connection to
Zip open-outlet tapware only - see
page 98.
Supplied with 1 metre of pre-wired
cable.
CFC-free insulation.
Impact resistant, easy clean, white
plastic casing.
Neon power-on indicator light.
Choice of 5 and 10 litre capacities.
Supplied complete with wall plugs
and screws.

Operation

Externally adjustable temperature control.
Neon light indicates when the power is ‘ON’.

Safety features

Open-outlet non-pressurised system.
Heater protected against freezing while
power switched on.
Manually re-settable over-temperature
safety cut-out.

Installation

Rating

2.0 kW @ 230V.

Supplies hot water to a single outlet using
spout or Zip vented taps. No need for
expansion vessel or pressure relief valve.

Heating element

Screws and wall fixings provided.

Embedded rod type.

Thermostat

Capillary type, adjustable
35˚C to 80˚C.

Inner container

Polypropylene tested to 1.5 bar.

Case

Impact resistant plastic.

Insulation

Moulded CFC-free polystyrene.

Approvals

WRAS, CE endorsed.

Warranty
One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

Plumbing

Can be connected to a rising main or to a
cistern with a minimum working head of
3 metres.
Over-sink models are supplied with a
300mm open outlet spout and control
valve.
Undersink models must only be connected
to Zip open-outlet taps, (see page 96).
Over-sink and under-sink models are NOT
interchangeable.

Electrical

To be wired to a double pole switched
fused spur with a minimum break capacity
of 13 amps. Installation must comply with
current IEE regulations.

Hot water
Product Code

Capacity
Litres

Thermal Loss
kWh/day

Dimensions
W x H x D (mm)

P4/52

5.0

0.32

255 x 215 x 390

P4/102

10.0

0.40

310 x 265 x 440

P4/52UB

5.0

0.32

255 x 215 x 390

P4/102UB

10.0

0.40

310 x 265 x 440

Zip Tudor II Oversinkk

Zip Tudor II Undersink

Hot water

Zip Contract II
Over-sink water heater
®

Open outlet for single point of use
5, 10 litre
Features and benefits

Insulation

Moulded, CFC free Polystyrene.

•

Open outlet oversink water heater for
single point of use.

•

External temperature control with
frost protection.

•

Over temperature safety thermal fuse
(C2/50 and C2/100).

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

•

Remotely resettable over
temperature protection (C3/50).

Safety features

•

Supplied with inlet control valve and
swivel outlet spout.

•

Impact resistant, easy clean, white
plastic casing.

•

CFC-free insulation.

All models should be wall mounted.

•

Choice of 5 or 10 litre capacity.

Screws and wall fixings provided.

Approvals

WRAS, CE endorsed.

Warranty

Safety cut out in the event of
a thermostat failure.
Heater protected against freezing while
power switched on.

Installation

Plumbing

Capacities

Can be connected to a rising main or to a
cistern with a minimum working head of
3 metres.

5 litre, 10 litre.

Rating

2.0 kW @ 230V.

Supplied with a 300mm open outlet spout and
water control valve.

Heating element
Embedded rod type.

Electrical

Thermostat

To be wired to a double pole switched fused
spur with a minimum break capacity of 13
amps. Installation must comply with current
IEE regulations.

Capillary type adjustable
35˚C – 80˚C.

Inner container

Polypropylene tested to 1.5 bar.

Case

Impact resistant white plastic.

Zip Accessories
Vented Point of Use

*UB1

*UB6

*UB7

TS1

Monobloc mixer

Single lever
basin tap

Single lever sink tap

Telescopic spout
350-600mm

*For use with Zip Tudor P4/52UB and P4/102UB

Hot water
C3/50 model

Product Code

C2/50 model

Capacity
Litres

Thermal Loss
kWh/day

Dimensions
W x H x D (mm)

Zip Contract
C2/50

5.0

0.32

255 x 215 x 390

C2/100

10.0

0.40

310 x 265 x 440

*C3/50

5.0

0.32

255 x 215 x 390

* Specialist product for temporary site applications with remotely resettable dry start
protection. For details contact Zip Technical support.

Hot water

Zip RCH
Cistern-type water heater
®

Single or multiple outlet
25, 50, 75, 100 litre

Features and benefits
•

Patented design ensures the
temperature of the water in the
cistern tank is maintained within
current regulatory limits.

Should be mounted on a wall at least one
metre above the highest draw-off point.
Wall and fixings should be adequate to
support the weight of the heater when full.

•
•

Simple to install and maintain.
Trouble free operation

Heater to be fixed using the integral wall
mounting bracket.

•

Choice of 4 capacities.

Top clearance of 150mm must be allowed
for access to the ball valve in the cistern
tank.

Capacities

25 litre, 50 litre, 75 litre, 100 litre.

Rating

Bottom clearance of 250mm must be
allowed for withdrawal of the heating
element.

Heating element

Cold inlet, left or right hand connection,
1⁄2” BSP.

Thermostat

Hot outlet, from base of heater, 22mm
compression fitting.

Water tank
Hot water tank and cold water feed cistern
are both manufactured from copper sheet
with brazed seams.

Drain connection, supplied
and fitted.

Case

Ball valve is for mains pressure operation,
brass body to BS1212-2.

2.8 kW @ 230V
(5.6 kW option on 100 litre).
Embedded rod.

Rod type, adjustable from 5ºC – 65ºC.

Corrosion resistant, white powder coated
steel.

Insulation
Fully fire-retardant foiled urethane core.
Safety features

Over temperature cut-out.

Approvals

Plumbing

Overflow, left or right hand connection,
22mm compression fitting.

Electrical

To be wired to a double pole switched
fused spur with a minimum break capacity
of 13 amps.
RCH 100/6 should be provided with its own
dedicated supply.

WRAS, approval pending.
CE endorsed.

Installation must comply with current IEE
regulations. Supplied with 1 metre of cable.

Warranty

The cross sectional area of the connection
cable must be in accordance with the power
rating of the appliance.

One-year on site parts and labour. For full
details of the Zip Warranty Scheme visit:
www.zipheaters.co.uk/warranty

100

Installation

Hot water
Product
Code

Capacity
Litres

Rating
kW @ 230V

Weight
Full (kg)

Dimensions
W x D x H
(mm)

RCH25

30.0

3.0

470 x 210 x 705

RCH50

50.0

3.0

106

600 x 320 x 750

RCH75

80.0

3.0

136

600 x 320 x 925

RCH100

100.0

3.0

164

600 x 320 x 1080

RCH100/6

100.0

2 x 3.0

164

600 x 320 x 1080

Zip RCH

101

General Data

Zip Hot Water
Typical applications

Application
(Up to)
Single hand wash
1 basin

1 sink

2 basins

3 basins
1 basin, 2 sinks
3 basins, heavy use or 2 sinks
1 shower
1 bath & shower

Bed-sit

1 bath & shower (1-2 beds)
1 bath & shower (3 beds)
1 bath & shower (4 beds)
2 bath & shower (5 beds)
3 bath & shower (6 beds)

Suggested
Zip Products
ES3*, ES4*, ES6*
CEX
AP3/05, AP3/05/OB
P4/52, P4/52UB
C2/50
CEX*
DEX12*
AP3/30
VP303
CEX*
DEX12*
AP3/10, AP3/10/OB
VP103, VP103UB
AP3/15, AP3/15/OB
VP153, VP153UB
RCH25
DEX/DBX*
DEX12*
DEX/DBX*
DEX/DBX*
AP3/80
VP803
RCH75
DEX/DBX*
AP3/100
VP953
AF3120, AF4090
RCH100
DEX/DBX*
AF3150, AF4120
AF3180, AF4150
AF3210, AF4180
AF3250, AF4210
AF3300, AF4250

Page
reference
70
74
80
94
96
74
76
86
88
74
76
80
82
80
82
98
76
76
76
76
86
88
98
76
86
88
90
98
76
90
90
90
90
90

N.B. These application suggestions are based upon the assumption that the incoming water
supply temperature is 12°C.
For advice on product selection, if the incoming water temperature is likely to be lower, call our
Technical Service Team on 0845 6 005 005.

102

General Data

Zip Hot Water
General Data

Useful
formulae

Time to heat stored water (mins)

Litres x Temp Rise (˚C)
kW rating x 14.3

Temperature rise with an

instantaneous water heater ( ˚C )
Temperature

14.3 x kW rating
Litres/min flow

Degrees Celsius

= ( ˚F-32 ) x 5⁄9

Degrees Fahrenheit

= ( ˚C x 9⁄5 ) + 32

Degrees Kelvin

= ( ˚C + 273.2 )

Conversion factors
Pressure
1 Bar

1 psi
Heat

=
=
=

14.5 psi
100 kiloNewtons/m
7 kPa

100 kPa

1 kiloCalorie (kCal) is the amount of energy required
to raise 1 kg of water through one degree Celsius

Zip Heaters (UK) Ltd reserves the right to modify the specification of its products without
notice and makes every effort to maintain the accuracy of information contained in this
publication.
The terms ‘Zip’, ‘HydroTap’, ‘Hydroboil’, ‘Econoboil’, ‘Duo’, ‘Chilltap’, ‘Chillmaster’, ‘Wall
Fountain’, ‘Chill Fountain’, ‘Aquapoint’, ‘Varipoint’, ‘AquaFlo’, ‘Inline ES’, ‘InLine’, ‘Tudor’,
‘Contract’ and ‘RCH’ are all registered trademarks.
The Zip Product Guide April 2015
©Copyright Zip Heaters (UK) Ltd

103

Tel: 0845 6 005 005 (for landline users)
Tel: 0345 6 005 005 (for mobile users)
Head Office:
Zip Heaters UK Ltd
Bertie Ward Way
Dereham
Norfolk
NR19 1TE

London Office:
Zip Heaters UK Ltd
Clover House
147-149 Farringdon Road
Clerkenwell
London
EC1R 3HN

Birmingham Office:
Zip Heaters UK Ltd
3A Orion Building
Navigation Street
Birmingham
B5 4AA

Manchester Office:
Zip Heaters UK Ltd
269-271 Deansgate
Manchester
M3 4EW

Brochure reference:
ZDL/010415/V2

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2015:03:25 14:12:40Z
Metadata Date                   : 2015:03:25 14:15:17Z
Modify Date                     : 2015:03:25 14:15:17Z
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:3b377988-2086-4a32-ac20-46f79bcdadf9
Original Document ID            : xmp.did:FDD45FED5120681195FED7F5BE38300B
Document ID                     : xmp.id:EBB2F7C0DCD2E411970EF2AF9B36F291
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:307E7D0951D1E4119389DDDD9922BF76
Derived From Document ID        : xmp.did:307E7D0951D1E4119389DDDD9922BF76
Derived From Original Document ID: xmp.did:FDD45FED5120681195FED7F5BE38300B
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:03:25 14:12:40Z
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 104
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools

Zip Water Product Guide April 2015

Navigation menu

Versions of this User Manual:

Views

Navigation