Zoweetek Electronics P04 Remote Control User Manual

Shenzhen Zoweetek Electronics Limited Remote Control

User Manual

Shenzhen Zoweetek Electronics Limited Remote Control ZW-P04 User Manual
Function Enlargement during Photography and Photo-viewing Adjust the Selfie Robot to Move Clockwise Adjust the Selfie Robot to Move Anti-clockwise Reduction during Photography and Photo-viewing Switch Between Front and Back Carmera Power Switch 180 /360 Panoramic Photography Switch Between Automatic Face Tracking and Manual Photography Videography
Specifications Modulation Type: Transmission Mode: 2.4GHz, up to 10 meters Conducted RF Output Power: 5 dBm Supply: Built-in Lithium Battery DC 4.2V by battery (250mAh) Recharge Voltage: 5V , 0.4A 26 g 80*38*14 mm Warning er. Maintenance . The battery will discharge if it is stored for a long time without operation. environment, which will shorten the battery life. Disposal Always dispose the used appliance at a recycling centre. Do not dispose the used appliance together with household wastes. GFSK
Notice: Due to 2.4G wave technology adoption, the connection can be subject to interference from obstacles, like walls, metals, or other electronic devices. Please keep the space between the remote control and the selfie robot free of obstacle. In line with the policy of continued development, the manufacturer reserves the right to amend. The specifications without prior notification. The illustrations in the user manual are for reference only. Please operate according to the real design.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu