Zoweetek Electronics P04 Remote Control User Manual
Shenzhen Zoweetek Electronics Limited Remote Control
User Manual
Shenzhen Zoweetek Electronics Limited
Remote Control
ZW-P04
User Manual
Function
Enlargement during Photography and
Photo-viewing
Adjust the Selfie Robot to Move Clockwise
Adjust the Selfie Robot to Move Anti-clockwise
Reduction during Photography and Photo-viewing
Switch Between Front and Back Carmera
Power Switch
180 /360 Panoramic Photography
Switch Between Automatic Face Tracking and
Manual Photography
Videography
Specifications
Modulation Type:
Transmission Mode: 2.4GHz, up to 10 meters
Conducted RF Output Power: 5 dBm
Supply: Built-in Lithium Battery
DC 4.2V by battery (250mAh)
Recharge Voltage: 5V , 0.4A
26 g
80*38*14 mm
Warning
er.
Maintenance
. The battery will discharge if it is stored for a long
time without operation.
environment, which will shorten the battery life.
Disposal
Always dispose the used appliance at a
recycling centre. Do not dispose the used
appliance together with household wastes.
GFSK
Notice:
Due to 2.4G wave technology adoption, the
connection can be subject to interference from
obstacles, like walls, metals, or other electronic devices.
Please keep the space between the remote control
and the selfie robot free of obstacle.
In line with the policy of continued development, the
manufacturer reserves the right to amend. The
specifications without prior notification. The
illustrations in the user manual are for reference only.
Please operate according to the real design.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.