ZyXEL Communications G162 802.11g Wireless CardBus Card User Manual

Download:
Mirror Download [FCC.gov]
Document ID	464632
Application ID	YRxug/GSDTulOpzh6Y90Ww==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.23kB (240405 bits)
Date Submitted	2004-09-01 00:00:00
Date Available	2004-09-01 00:00:00
Creation Date	2004-07-27 11:11:44
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-08-30 17:55:56
Document Title	Microsoft Word - ZyXEL G-162_QSG_v1_2004-7-27-English
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

ZyXEL
G-162
802.11g Wireless CardBus Card
Quick Start Guide
ZyXEL G-162 Quick Start Guide
Important Note
Federal Communications Commission (FCC) Interference Statement
The 802.11g Wireless LAN Adapter has been tested to the FCC exposure
requirements (Specific Absorption Rate).
The equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment, under 47 CFR 2.1093 paragraph (d) (2).
This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Refer to the User’s Guide for general FCC statements.
Procedure to View a Product’s Certification(s)
1. Go to www.zyxel.com
2. Select your product from the drop-down list box on the ZyXEL home page to go
to that product's page.
3. Select the certification you wish to view from this page.
About Your ZyXEL G-162
The ZyXEL G-162 is an IEEE 802.11g compliant wireless LAN PC card that fits
into any CardBus slot. With the ZyXEL G-162, you can enjoy the wireless mobility
within the coverage area. The IEEE 802.11g technology provides greater range and
offers transmission rate at up to 54 Mbps. Your ZyXEL G-162 can transmit at the
proprietary transmission rate of 125 Mbps if you are connecting to the ZyXEL G162 and G-560 (at the time of writing).
ZyXEL G-162 Quick Start Guide
1. Installation Requirements
Before installation, make sure you have a computer with the following:
•
Pentium II 300MHz or above
•
A minimum of 6 MB available hard disk space
•
A minimum of 32 MB RAM
•
A CD-ROM drive
•
A CardBus slot
•
Windows 98 SE/Me/2000/XP
•
Windows 98 SE users may need the Windows 98 SE CD
If you install the Funk Odyssey Client software on the
computer, uninstall (remove) it.
2. ZyXEL Utility and Hardware Installation
The installation procedures are similar for all supported Windows versions.
Windows 2000 screen shots are shown unless otherwise specified.
DO NOT insert the ZyXEL G-162 at this point.
1. Insert the support CD into the CD-ROM drive on your computer. The CD
automatically runs. Otherwise, locate and double-click setup.exe.
ZyXEL G-162 Quick Start Guide
2. Select your language and click
OK.
3. Click Install Utility to start
installation.
4. A welcome screen displays. Click Next.
5. Click Next to accept the default
file location or click Browse to
select an alternate folder.
6. Click Finish to restart the computer.
ZyXEL G-162 Quick Start Guide
7. Locate an available CardBus slot on the
computer.
8. With the pin connectors facing the slot and
the LED side facing up, slide the ZyXEL
G-162 into the slot. The LEDs turn on if
the ZyXEL G-162 is properly inserted.
Never bend, force or twist the ZyXEL G-162 into the slot.
After you install the ZyXEL Utility and insert the ZyXEL G-162, an icon
appears in the system tray.
If the ZyXEL Utility icon displays, the ZyXEL G-162 is
installed properly. Refer to the User’s Guide to configure the
ZyXEL G-162.
LED Display
PWR
LINK
The following table describes the LEDs on the ZyXEL G-162.
ZyXEL G-162 Quick Start Guide
LED
COLOR
PWR
Green
LINK
Green
STATUS
DESCRIPTION
On
The ZyXEL G-162 is receiving power.
Off
The ZyXEL G-162 is not receiving power.
Blinking
The ZyXEL G-162 is receiving or sending data.
Off
The ZyXEL G-162 is not receiving or sending data.
Troubleshooting
PROBLEM
Windows does not
auto-detect the
ZyXEL G-162.
CORRECTIVE ACTION
Make sure the ZyXEL G-162 is inserted into the computer
CardBus slot properly and then restart your computer. Check
the LEDs on the ZyXEL G-162.
Perform a hardware scan by clicking Start, Settings, Control
Panel and double-clicking Add/Remove Hardware. (Steps
may vary depending on the version of Windows).
Follow the on-screen instructions to search for the ZyXEL G162 and install the driver.
Check for possible hardware conflicts. In Windows, click Start,
Settings, Control Panel, System, Hardware and then click
Device Manager. Verify the status of the ZyXEL G-162 under
Network Adapter. (Steps may vary depending on the version
of Windows).
Install the ZyXEL G-162 in another computer. If the error
persists, you may have a hardware problem. In this case, you
should contact your local vendor.
or
C ertifica tions . F or more informa tion a bout your devices Decla ra tion of C onformity (DO C ) plea s e refer to www. z yxel. com
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The equipment version marketed in USA is restricted to usage of the channels 1-11 only.
This equipment has been SAR-evaluated for use in laptops (notebooks) with side.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:07:27 11:11:44+08:00
Modify Date                     : 2004:08:30 17:55:56+08:00
Page Count                      : 7
Creation Date                   : 2004:07:27 11:11:44+08:00
Mod Date                        : 2004:08:30 17:55:56+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Administrator
Metadata Date                   : 2004:08:30 17:55:56+08:00
Creator                         : Administrator
Title                           : Microsoft Word - ZyXEL G-162_QSG_v1_2004-7-27-English
Page Mode                       : UseNone
Has XFA                         : No

EXIF Metadata provided by EXIF.tools