ZyXEL Communications VMG3925-B10A Dual-Band Wireless AC/N VDSL2 Combo WAN Gigabit Gateway with USB User Manual VMG3925 B10A

Download:
Mirror Download [FCC.gov]
Document ID	2791571
Application ID	3E8yt53vWR8RrDFAyl5z9w==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16kB (200031 bits)
Date Submitted	2015-10-23 00:00:00
Date Available	2015-10-27 00:00:00
Creation Date	2015-10-12 16:56:09
Producing Software	GPL Ghostscript 8.63
Document Lastmod	2015-10-12 16:56:09
Document Title	Microsoft Word - VMG3925-B10A_User manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	alicel

 5 GHz 11ac (3x3) for
smooth, optimized
HD IPTV services
everywhere

 2.4 GHz 11n (2x2) for
superior
performance and
coverage

 Extreme routing
performance for FTTx
applications

 VDSL2 vectoring for
maximized service
coverage

 Combo WAN-in-a-box
for optimized CAPEX
in FTTH/VDSL2
deployments

 3G dongle support

 Intelligent CoC saves
energy with rich
green features
VMG3925-B10A
Dual-Band Wireless AC/N VDSL2 Combo WAN
Gigabit Gateway with USB
Benefits
G.vector to optimize performance and CAPEX
The VMG3925-B10A supports Vectoring technology that
eliminates cross-talk or interference among different
VDSL lines. With the mechanism, Vectoring significantly
increases the bit rates to compete with cable/fiber
technology as well as to enlarge the service coverage
without changing the current infrastructure—a way to
save cost significantly comparing to fiber-to-the-home
(FTTH) deployments and CAPEX can also be optimized
by the improved data rates and coverage without
upgrading the equipment.
Combo WAN for simplified ISP logistics and optimized
CAPEX
With the VMG3925-B10A, there’s no need for service
providers to invest on and replace new CPEs at
customer sites when customers migrate from ADSL2+ or
VDSL2 to PON or LTE; all they need to do is to unplug
the DSL line, and then plug the Ethernet cable to the
Ethernet WAN port as the existing CPE. VMG3925-B10A
will be used to terminate the IP connections via the
WAN interface. In most cases, users can still connect
with the original CPE to avoid replacing the unit due to
the difference of physical connections.
802.11ac technology for extreme performance and coverage
The VMG3925-B10A features 802.11ac technology to provide the ultimate solution for
both speed and coverage. With 802.11ac wireless data rates of up to 1.3 Gbps, the
VMG3925-B10A provides stable, reliable wireless connections for high-speed data and
multimedia usages. The 802.11ac technology empowered the device to eliminate dead
zones and extend coverage while retaining backward compatibility with any Wi-Fi
certified device.
Quality of Service (QoS) support
With QoS features, service providers can freely design their QoS policies and prioritize
the mission- critical services such as IPTV based on their service plan offerings. This
increases network efficiency and productivity that enable service providers to offer a
real multi-play solution meeting the needs of residential users.
TR-069 remote management
The VMG3925-B10A incorporates the TR-069 standard management specifications for
service providers to manage and configure client devices remotely without any end
user intervention. This feature offers a true “plug-and-play” experience while reducing
deployment complexity to help saving the operating and maintenance costs for service
providers.
Specifications
•
•
System Specifications
Wireless
•
•
•
IEEE 802.11ac 5 GHz
with up to 1.3 Gbps
data rate
IEEE 802.11n 2.4 GHz
with up to 300 Mbps
data rate
Wireless Protected
Setup (WPS)
•
•
WEP data encryption
(64/128 bit)
WPA/WPA2,
WPA-PSK/WPA2-PSK
Wi-Fi scheduling
Multiple SSID (up to 4)
•
•
•
•
VDSL and ADSL
•
VDSL/ADSL2+
compliance
•
VDSL2 (G.993.2), band
plan Annex A, Annex B
(over POTS)
•
Support profile 8a, 8b,
8c, 8d, 12a,12b, 17a
•
•
•
VDSL1 (G.993.1)
ADSL2+ (G.992.5)
support Annex A, I, M
ADSL2 (G.992.3)
support Annex A, I, L,
ADSL (G.992.1) Annex
ANSI T1.413 issue 2
G.INP (G.998.4)
G.vector (G.993.5)
VLAN/QoS
•
Support flexible traffic
classification
•
•
•
6-bit DiffServ Code
Point (DSCP, RFC 2474)
802.1P 3-bit Class of
Service (CoS)
802.1Q 12-bit VLAN ID
•
Management
•
Router/Bridge Features
•
•
IEEE 802.1d
transparent bridge
PPP over Ethernet (RFC
2516)
•
MAC encapsulation
routing/IPoE
Network Address
•
Translation
(NAT)/Network
Address Port
Translation (NAPT )
NAT server (Port
•
•
•
•
•
•
•
forwarding)
DHCP
client/server/relay
DNS proxy/dynamic
DNS
Static route/policy
routing
IGMP v1, v2
IP protocol v6 (IPv6)
•
•
WAN
•
•
•
•
•
DoS attack prevention
Parental control
File sharing
one RJ45 connector for
Giga Ethernet WAN port
Power Specifications
•
External power supply:
110~240VAC/12V DC
1.5A Adaptor
•
Power consumption at
peak: 18 W
Physical Specifications
•
•
•
•
•
Wireless
•
Two internal 3dBi 2.4GHz
antennas
•
Three internal 3dBi 5GHz
antennas
Buttons
•
One reset
•
One WPS on/off
•
One WLAN on/off
One USB host port
Status LED: Power, DSL,
Ethernet, WAN, WLAN 2.4G,
Dimension: 215(H) x
142(W) x 42(D) mm
Weight: TBD
Environment
Specifications
•
Firewall
Generic packet filter
USB
one RJ11 interface for
VDSL(over POTS)
LAN: Four 10/100/1000
MDI/MDIX RJ45 ports
•
Firmware upgrade via
HTTP/FTP/TR-069
DSL forum
TR-069/TR-098/TR-111
Hardware Specifications
Security
•
Web GUI
(HTTP/HTTPS)
Command Line
Interface (CLI)
/TR-064 • 802.1ag
Connectivity Fault
Management (CFM)
WLAN 5G, WPS, Internet,
USB
3G backup
Operation
Temperature: 0°C ~
45°C
Operation Humidity:
10% ~ 95%
Storage Temperature:
-30°C ~ 60°C
Storage Humidity: 10%
~ 95%
Regulations
•
RoHS, WEEE, HSF
Application Diagram
Certifications
Federal Communications Commission (FCC) Interference Statement
The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operations.
This device has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this device does cause harmful interference to radio/television reception, which can be determined
by turning the device off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
•
•
•
•
This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
IEEE 802.11b, 802.11g or 802.11n (20MHz) operation of this product in the U.S.A. is
firmware-limited to channel 1 through 11. IEEE 802.11n (40MHz) operation of this product in the
U.S.A. is firmware-limited to channel 3 through 9.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Notices
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
The device complies with the essential requirements of the R&TTE Directive 1995/5/EC.
Radiation Exposure Statement
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator
and your body.
National Communications Commission (NCC)
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the power, or
change the characteristics and functions of the original design of the certified lower power frequency
electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the navigation safety nor
interfere a legal communication, if an interference is found, the service will be suspended until
improvement is made and the interference no longer exists.
Industry Canada (IC)
CAN ICES-3 (B)/NMB-3(B)
This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Ce dispositif est conforme à la norme CNR-192 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer
un fonctionnement indésirable.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator
and your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm
de distance entre la source de rayonnement et votre corps.
Safety Warnings
. Do NOT use this product near water, for example, in a wet basement or near a swimming pool.
. Do NOT expose your device to dampness, dust or corrosive liquids.
. Do NOT store things on the device.
. Caution! Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
. Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric
shock from lightning.
. Connect ONLY suitable accessories to the device.
. Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high
voltage points or other risks. ONLY qualified service personnel should service or disassemble this
device. Please contact your vendor for further information.
. Make sure to connect the cables to the correct ports.
. Place connecting cables carefully so that no one will step on them or stumble over them.
. Always disconnect all cables from this device before servicing or disassembling.
. Use ONLY an appropriate power adaptor or cord for your device.
. Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North
America or 230V AC in Europe).
. Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where
anyone can walk on the power adaptor or cord.
. Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution.
. If the power adaptor or cord is damaged, remove it from the device and the power source.
. Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.
. Do not use the device outside, and make sure all the connections are indoors. There is a remote risk
of electric shock from lightning.
. Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.
. Use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord.
. Antenna Warning! This device meets ETSI and FCC certification requirements when using the
included antenna(s). Only use the included antenna(s).
. If you wall mount your device, make sure that no electrical lines, gas or water pipes will be
damaged.
. -Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry
tub, in a wet basement or near a swimming pool.
-Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a
remote risk of electric shock from lightning.
-Do not use the telephone to report a gas leak in the vicinity of the leak.
-Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire.
They may explode. Check with local codes for possible special disposal instructions.
- the screen of the coaxial cable is intended to be connected to earth in the building installation
Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste
Electronics and Electrical Equipment. It means that used electrical and electronic products should not
be mixed with general waste. Used electrical and electronic equipment should be treated
separately

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 7
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 946ea441-731a-11e5-0000-0a7a9925bb3b
Producer                        : GPL Ghostscript 8.63
Modify Date                     : 2015:10:12 16:56:09+08:00
Create Date                     : 2015:10:12 16:56:09+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : 946ea441-731a-11e5-0000-0a7a9925bb3b
Format                          : application/pdf
Title                           : Microsoft Word - VMG3925-B10A_User manual.doc
Creator                         : alicel
Author                          : alicel

EXIF Metadata provided by EXIF.tools