Zykronix Branch UWBM07 WifiBT Module User Manual
Zykronix Inc. Taiwan Branch WifiBT Module Users Manual
Users Manual
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 1
UWBM07: IEEE 802.11b/g/n + BT 4.0 Module
Rev 1.0
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 2
Revision History
Date Revision
Description
2017 May 1.0 First Draft
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 3
1 Contents
1 Contents ....................................................................................................................... 3
2 Overview ...................................................................................................................... 4
3 Specifications ............................................................................................................... 5
Feature specifications ...................................................................................................... 5
Electrical specifications .................................................................................................... 5
RADIO SPECIFICATIONS 802.11/B/G/N ........................................................................ 5
Standards Compliance .................................................................................................... 8
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 4
2 Overview
This document describes the UWBM07.
The 802.11a/b/g/n + BT 4.0 + FM RX Wireless Sip module UWBM07.
The module is based on Broadcom 4334 chipset which is a Wi-Fi + BT SoC. The Radio
architecture & high integration MAC/BB chip provide excellent sensitivity. The module is
designed as single antenna for Wi-Fi and Bluetooth for the application of small size hand held
device.
In addition to WPA, WPA2 and TKIP, AES, CCX is supported to provide the latest security
requirement on your network.
Features
Lead Free design which supporting Green design requirement, RoHS
Compliance, and halogen-free
Support single antenna for Wi-Fi and Bluetooth.
Small size suitable for low volume system integration. Low power consumption &
excellent power management performance extend battery life.
Easy for integration into mobile and handheld device with flexible system
configuration and antenna design.
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 5
3 Specifications
Feature specifications
Features
Description
WLAN Standards
IEEE 802 Part 11 b/g/n (802.11 b/g/n)
Bluetooth
BluetoothTM 4,0+HS compliance
Antenna Port
Support Single Antenna for both WiFi and BT
Frequency Band
2.4 to 2.497GHz (1 to 14 channels)
Items Specifications Units Remarks
Operating
Temperature -20° to 70° ℃ Ambient temperature
Operating humidity 60 %RH Non condensing
Storage temperature -40 ~ 135 ℃
Electrical specifications
Voltage
Items Specifications Units
Remarks
Min. Typ. Max.
VBAT 3.6 3.9 4.0 V Voltage Supply
VDD_FEM 3.2 3.3 3.6 V
VDDIO 1.71 1.8/3.3
3.63 V
RADIO SPECIFICATIONS 802.11/B/G/N
802.11G TRANSMIT
Item Condition Min.
*d
Typ.
*c
Max.
*d
Unit
Target Output Power
6~54Mbps - 14 - dBm
Level
*b
Transmit center
-25 - 25 ppm
frequency tolerance
*a
Transmit Modulation 54Mbps -28
-25
*a
dB
Accuracy (EVM) 6Mbps -28
-5
*a
dB
Transmit Spectral @ +/-11MHz -
-20
*a
dBr
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 6
@ +/
-
20MHz
-
-28
*a
dBr
Mask
@ +/-30MHz
-
-40
*a
dBr
Note: a. Refer to IEEE802.11 specification.
Output power tolerance is +/- 2dB
Based on the test result at room temperature and typical voltage.
Based on the test result at the corner temperature and voltage operating.
802.11B TRANSMIT
Item Condition Min.
*d
Typ.
*c
Max.
*d
Unit
Target Output Power
1~11M bps - 17 - dBm
Level
*b
Transmit center
-25 - 25 ppm
frequency tolerance
*a
Transmit spectral @+/-11MHz - - -30
*a
dBr
mask
@+/-22MHz - - *a dBr
-
50
* Note: a. Refer to IEEE802.11 specification.
b. Output power tolerance is +/- 2dB
c. Based on the test result at room temperature and typical voltage.
d. Based on the test result at the corner temperature and voltage operating.
2.4GHZ 802.11N TRANSMITTING – HT20
Item Condition Min.
*d
Typ.
*c
Max.
*d
Unit
Target Output Power
MCS0 ~ MCS7
-
13 - dBm Level
*b
Transmit Center
-25 - 25
ppm
Frequency Tolerance
*a
Transmit Modulation MCS7
-
-29
-28
*a
dB
Accuracy (EVM)
MCS0
-
-29
-5
*a
dB
@ +/-11MHz
-
-
-20
*a
dBr
Transmit Spectral Mask @ +/-20MHz
-
-
-28
*a
dBr
@ +/-30MHz
-
-
-45
*a
dBr
* Note: a. Refer to IEEE802.11 specification.
b. Output power tolerance is +/- 2dB.
c. Based on the test result at room temperature and typical voltage.
d. Based on the test result at the corner temperature and voltage operating.
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 7
The Radio specification is compliant with the BluetoothTM 2.1 + EDR specification
Features
Description
Frequency Band
2400 MHz ~ 2483.5 MHz
Number of Channels
79 channels
Modulation
FHSS (Frequency Hopping Spread Spectrum) ,
GFSK, DPSK
Antenna Port
Single Antenna for WiFi and BT
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 8
Standards Compliance
Part Number: 6A0-1010
Model: UWBM07
FCC ID: 2AGRR-UWBM07
IC : 8110A-UWBM07
Modular certification for US, Canada, Europe,
List of All Suitable Antennas:
ARISTOTLE ENTERPRISES INC. : RFA-25-G158-70B-50-1
ARISTOTLE ENTERPRISES INC. : RFA-25-AP531-70-155
Mechanical Specifications
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 9
The final end product must be labeled in a visible area with the following: “Contains FCC ID:
2AGRR-UWBM07 and IC: 8110A-UWBM07
This module has been granted modular approval for mobile applications. OEM integrators for
host products may use the module in their final products without additional FCC / IC (Industry
Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC
approvals must be obtained.
• The host product with the module installed must be evaluated for simultaneous
transmission requirements.
• The users manual for the host product must clearly indicate the operating requirements
and conditions that must be observed to ensure compliance with current FCC / IC RF
exposure guidelines.
• To comply with FCC / IC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only
exposure condition must not exceed {Insert Reference to Your Antenna Information Here.
(WIFI) For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference, and
UWBM07 Datasheet
UWBM07 Rev 1.0 Page 10
2) this device must accept any interference received, including interference that may cause
undesired operation of the device.
RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the
Le present appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio
exempts de licence.L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Caution: Exposure to Radio Frequency Radiation.
To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least
20 cm must be maintained between the antenna of this device and all persons.
Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de
séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les
personnes