Zykronix Branch UWBM07 WifiBT Module User Manual
Zykronix Inc. Taiwan Branch WifiBT Module Users Manual
Users Manual
UWBM07 Datasheet UWBM07: IEEE 802.11b/g/n + BT 4.0 Module Rev 1.0 UWBM07 Rev 1.0 Page 1 UWBM07 Datasheet Revision History Date 2017 May Revision 1.0 UWBM07 Rev 1.0 Description First Draft Page 2 UWBM07 Datasheet 1 Contents 1 Contents ....................................................................................................................... 3 2 Overview ...................................................................................................................... 4 3 Specifications ............................................................................................................... 5 Feature specifications ...................................................................................................... 5 Electrical specifications .................................................................................................... 5 RADIO SPECIFICATIONS 802.11/B/G/N ........................................................................ 5 Standards Compliance .................................................................................................... 8 UWBM07 Rev 1.0 Page 3 UWBM07 Datasheet 2 Overview This document describes the UWBM07. The 802.11a/b/g/n + BT 4.0 + FM RX Wireless Sip module UWBM07. The module is based on Broadcom 4334 chipset which is a Wi-Fi + BT SoC. The Radio architecture & high integration MAC/BB chip provide excellent sensitivity. The module is designed as single antenna for Wi-Fi and Bluetooth for the application of small size hand held device. In addition to WPA, WPA2 and TKIP, AES, CCX is supported to provide the latest security requirement on your network. Features Lead Free design which supporting Green design requirement, RoHS Compliance, and halogen-free Support single antenna for Wi-Fi and Bluetooth. Small size suitable for low volume system integration. Low power consumption & excellent power management performance extend battery life. Easy for integration into mobile and handheld device with flexible system configuration and antenna design. UWBM07 Rev 1.0 Page 4 UWBM07 Datasheet 3 Specifications Feature specifications Features WLAN Standards Bluetooth Antenna Port Frequency Band Description IEEE 802 Part 11 b/g/n (802.11 b/g/n) BluetoothTM 4,0+HS compliance Support Single Antenna for both WiFi and BT 2.4 to 2.497GHz (1 to 14 channels) Items Operating Temperature Operating humidity Storage temperature Specifications Units -20° to 70° ℃ 60 -40 ~ 135 %RH ℃ Remarks Ambient temperature Non condensing Electrical specifications Voltage Items VBAT VDD_FEM VDDIO Specifications Min. Typ. Max. 3.6 3.9 4.0 3.2 3.3 3.6 1.71 1.8/3.3 3.63 Units Remarks Voltage Supply RADIO SPECIFICATIONS 802.11/B/G/N 802.11G TRANSMIT Item Target Output Power Level*b Transmit center frequency tolerance*a 6~54Mbps Transmit Modulation 54Mbps Accuracy (EVM) Transmit Spectral UWBM07 Rev 1.0 Condition 6Mbps @ +/-11MHz Min.*d Typ.*c 14 -25 -28 -28 Max.*d 25 -25*a *a -5 -20*a Unit dBm ppm dB dB dBr Page 5 UWBM07 Datasheet Mask @ +/-20MHz -28*a dBr *a dBr -40 @ +/-30MHz Note: a. Refer to IEEE802.11 specification. Output power tolerance is +/- 2dB Based on the test result at room temperature and typical voltage. Based on the test result at the corner temperature and voltage operating. 802.11B TRANSMIT Item Target Output Power Level*b Transmit center frequency tolerance*a Transmit spectral mask Condition Min.*d Typ.*c 17 dBm -25 25 ppm 1~11M bps @+/-11MHz Max.*d -30 *a *a @+/-22MHz -50 * Note: a. Refer to IEEE802.11 specification. b. Output power tolerance is +/- 2dB c. Based on the test result at room temperature and typical voltage. d. Based on the test result at the corner temperature and voltage operating. Unit dBr dBr 2.4GHZ 802.11N TRANSMITTING – HT20 Item Target Output Power Level*b Transmit Center Frequency Tolerance*a Transmit Modulation Accuracy (EVM) Condition MCS0 ~ MCS7 Min.*d Typ.*c 13 -25 -29 -29 Max. *d 25 -28*a -5*a -20*a -28*a -45*a MCS7 MCS0 @ +/-11MHz Transmit Spectral Mask @ +/-20MHz @ +/-30MHz * Note: a. Refer to IEEE802.11 specification. b. Output power tolerance is +/- 2dB. c. Based on the test result at room temperature and typical voltage. d. Based on the test result at the corner temperature and voltage operating. UWBM07 Rev 1.0 Unit dBm ppm dB dB dBr dBr dBr Page 6 UWBM07 Datasheet The Radio specification is compliant with the BluetoothTM 2.1 + EDR specification Features Description 2400 MHz ~ 2483.5 MHz Frequency Band Number of Channels 79 channels Modulation FHSS (Frequency Hopping Spread Spectrum) , GFSK, DPSK Antenna Port Single Antenna for WiFi and BT UWBM07 Rev 1.0 Page 7 UWBM07 Datasheet Standards Compliance Part Number: 6A0-1010 Model: UWBM07 FCC ID: 2AGRR-UWBM07 IC : 8110A-UWBM07 Modular certification for US, Canada, Europe, List of All Suitable Antennas: ARISTOTLE ENTERPRISES INC. : RFA-25-G158-70B-50-1 ARISTOTLE ENTERPRISES INC. : RFA-25-AP531-70-155 Mechanical Specifications UWBM07 Rev 1.0 Page 8 UWBM07 Datasheet The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2AGRR-UWBM07 and IC: 8110A-UWBM07 This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained. • • • The host product with the module installed must be evaluated for simultaneous transmission requirements. The users manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / IC RF exposure guidelines. To comply with FCC / IC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed {Insert Reference to Your Antenna Information Here. (WIFI) For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and UWBM07 Rev 1.0 Page 9 UWBM07 Datasheet 2) this device must accept any interference received, including interference that may cause undesired operation of the device. RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Canada, Industry Canada (IC) Notices This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the Le present appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Caution: Exposure to Radio Frequency Radiation. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes UWBM07 Rev 1.0 Page 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Warning : Info object (109 0 obj) not found at 879085EXIF Metadata provided by EXIF.tools