Zylux Acoustic SB3820-C6 38 inch Sound Bar 2.0 System User Manual

Zylux Acoustic Corporation 38 inch Sound Bar 2.0 System

UserManual.wiki >

Zylux Acoustic >

SB3820 C6 User Manual

User manual

QUICK START GUIDE1202-0001161

• Do not overload power strips and extension cords. Overloading can result in ﬁre or electric shock.• The wall socket should be located near your Unit and be easily accessible• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in this case may result in ﬁre or electric shock.• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Unit yourself.• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause ﬁre or electric shock.• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause ﬁre or electric shock.• Ensure that the power cord and any other cables are unplugged before moving your Unit.• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause ﬁre or electric shock. When your Unit will not be used for an extended period of time, unplug the power cord.• To reduce risk of electric shock, do not touch the connector with wet hands.• Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator.• See the important note and rating located on the back of the unit.• WARNING - This equipment is not waterproof. To prevent a ﬁre or shock hazard, do not place any container ﬁlled with liquid near the equipment (such as a vase or ﬂower pot) or expose it to dripping, splashing, rain, or moisture.• CAUTION - Danger of explosion or ﬁre if batteries are mistreated. Replace only with the same or speciﬁed type.• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in ﬁre.WARNING: To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.Explanation of WARNING symbols:The lighting ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the product that may be sufﬁcient magnitude to constitute a risk of shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.Your Unit is designed and manufactured to operate within deﬁned design limits, and misuse may result in electric shock or ﬁre. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference.• Read these instructions.• Keep these instructions.• Heed all warnings.• Follow all instructions.• Do not use this apparatus near water.• Clean only with a dry cloth.• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.• Only use attachments/accessories speciﬁed by the manufacturer.• Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.• Unplug this apparatus during lightning storms or when unused for long periods of time.• Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit.• Unplug the power cord before cleaning your Unit. A damp cloth is sufﬁcient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.• Always use the accessories recommended by the manufacturer to insure compatibility.• When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Unit to avoid causing ﬁre, electric shock, or component damage.• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided.• Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a ﬁre or electric shock. Never spill liquids on your Unit.• When connected to a power outlet, power is always ﬂowing into your Unit. To totally disconnect power, unplug the power cord. IMPORTANT SAFETY INSTRUCTIONSCAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN

PACKAGE CONTENTSThis Quick Start GuideRemote Control with BatteriesHigh Deﬁnition Sound BarDigital Optical CableStereo RCA to 3.5mm Audio CablePower Cable2 x Sound Bar Wall Mount BracketsWall Mount Template2 x Wall Mount Screws(Size: M4 x 10mm)

CONTROLS & CONNECTIONSDIGITAL (3)AUX (1)AC IN120V~∕60Hz60WOPTICAL (4)AUX (2)SUB OUTSERVICEUSB (6)LRBack of Sound BarPower Port SUB OUTSubwoofer OutOPTICAL (4)Digital Optical Audio InDIGITAL (3)Coaxial InAUX (1)Analog Audio In(Stereo RCA)DIGITAL (3)AUX (1)AC IN120V~∕60Hz60WOPTICAL (4)AUX (2)SUB OUTSERVICEUSB (6)LRAUX (2)Analog Audio In(Stereo 3.5mm)Service PortFor use by service technicians only.USB* (6)USB In*Supports .WAV ﬁle format playback only

DIGITAL (3)AUX (1)AC IN120V~∕60Hz60WOPTICAL (4)AUX (2)SUB OUTSERVICEUSB (6)LRControl Buttons are located here:Back of Sound BarInput Press to change the audio source.Power Press to turn soundbar on or off.Volume Increase or decrease the loudness of the audio.+ -Bluetooth Input Hold to pair.(See ‘Bluetooth Pairing’ for more information.)

FIRST-TIME SETUP* Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc.) see your device’s user manual.1AND CONNECT IT TO YOUR TVCHOOSE ONE CABLE:BETTERGOODGOOD GOOD BETTERBETTER3.5MM TO RCA CABLE3.5MM TO RCA CABLEDIGITAL COAXIAL CABLE†‡DIGITAL OPTICAL CABLE†Back of Sound Bar† When using either of the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.‡ Cable not included.

DIGITAL (3)AUX (1)AC IN120V~∕60Hz60WOPTICAL (4)AUX (2)SUB OUTSERVICEUSB (6)LRDIGITAL OPTICAL CABLE†DIGITAL (3)AUX (1)AC IN120V~∕60Hz60WOPTICAL (4)AUX (2)SUB OUTSERVICEUSB (6)LR3Connect the Power Cable to the Sound Bar. Plug the Power Cable into a power outlet.DIGITAL (3)AUX (1)AC IN120V~∕60Hz60WOPTICAL (4)AUX (2)SUB OUTSERVICEUSB (6)LR2

For the best surround sound experience, position the Sound Bar as shown. The Sound Bar should be close to ear level.Sound Bar is centered below the TV.4

5Remove the battery cover by gently sliding it away from the remote.6Insert the included batteries and gently slide the battery cover back into place.7Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. Press the Input button to switch between audio sources. For example, if you connected your TV to Input 1, set the Sound Bar to Input 1.Hardware setup is complete.PowerInputTop Top

Volume + Press to increase volume.Volume – Press to decrease volume.USING THE REMOTEPrevious Press to return to previous track.(Changes Treble and Bass levels)PowerPress to turn on or off.Mute Press to mute/unmute.Input Press to change input source.Enter/Play/Pause Press to select an option.Press to play or pause.Next Press to skip to the next track.(Changes Treble and Bass levels)Treble Press to enter treble adjustment mode.Bass Press to enter bass adjustment mode.TruVolume Press to enable/disable TruVolume.TruSurround HD Press to enable/disable TruSurround HD.BluetoothPress to enter Bluetooth input. (To enter force pair mode, press and hold for 5 seconds)

BLUETOOTH PAIRINGTo pair the Sound Bar with a Bluetooth device: 1. Press and hold the Bluetooth button on the Sound Bar or the Bluetooth button on the remote for ﬁve (5) seconds. When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from left to right and back again. Once the device is paired, the LED Indicators will stop ﬂashing.2. You can now search for the Sound Bar (VIZIO S3820w) using your Bluetooth device. For more information, see the documentation that came with your device.3. Play audio from your Bluetooth device. Volume can be controlled on your source device and the Sound Bar.Back of Sound Bar

USING BLUETOOTH MODEYour Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired, even if you change the input on the Sound Bar.Maximizing SignalA Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection.Try the following if your sound quality is less than optimal:• If you hear any break-up or disconnect while streaming music from your device, move the source device closer to the Sound Bar. • Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source device. • Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve Bluetooth range.Your Sound Bar is not equipped with a microphone, so it cannot operate as a hands-free device for a smartphone. Reduce the volume levels on your device and on the Sound Bar before pressing Play. High volume levels can damage your hearing.

ADVANCED SETUPConnect up to four (4) different devices to the Sound Bar (devices shown are examples; you can use any device). To listen to a device, change the input source on the Sound Bar.Optical, Coaxial, and 3.5mm cables transmit audio only. Connecting a video device requires a separate video connection from the device to your TV.Game Console Network Media Player Tablet/MP3 Player/LaptopBack of Sound BarRCA AUDIO CABLEDIGITAL OPTICAL CABLE†3.5mm AUDIO CABLEDIGITAL COAXIAL CABLE† Cable not included.* Supports .WAV ﬁle format playback only.USB THUMB DRIVE*

CONNECTING A SUBWOOFER DIGITAL (3)AUX (1)AC IN120V~∕60Hz60WOPTICAL (4)AUX (2)SUB OUTSERVICE USB (6)LRBack of Sound BarTo connect a subwoofer:1. Press the BASS button on the remote control to enter bass adjustment mode.2. Use the Previous/Next buttons to adjust the bass level to the center position.3. Power Off the Sound Bar and Subwoofer. Connect an RCA cable from the Sound Bar to the Subwoofer.4. Power On the Sound Bar and Subwoofer.5. Manually adjust the SUB gain (Volume) and phase to your preference. See your subwoofer’s user manual for more information.6. Use the BASS button on the remote control to adjust the subwoofer’s output. Optional Subwoofer*RCA Subwoofer Cable**RCA subwoofer cable and subwoofer not included.

WALL MOUNTING THE SOUND BARDIGITAL (3)AUX (1)AC IN120V~∕60Hz60WOPTICAL (4)AUX (2)SUB OUTSERVICEUSB (6)LRBack of Sound Bar Wall-Mount Screw Holes Insert the two wall-mount screws into the wall-mount screw holes, and then tighten them with a Phillips screwdriver. 12Place the included wall mounting template against the wall under your TV. Mark the four bracket holes using a pencil.

Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for brick/concrete walls).Screws for attaching the brackets to the wall are not included. Choose the screw type and length appropriate to your home’s construction. If in doubt, consult a professional installer.If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer.22.5 in (571.5 mm)Wall Mount ScrewScrew Size: M4 x 103

USING BUTTON COMBINATIONSThere are 3 functions that are triggered by 3 different button combinations on the Sound Bar.InputPowerVolume+ -Bluetooth InputBack of Sound BarFunction LED Behavior DescriptionFactory Reset All 12 LEDs will ﬂash 3 times:Reset the Sound Bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds. Note: This will erase all settings and preferences that you have set.VIZIO TV Remote ControlEnable VIZIO TV Remote:Disable VIZIO TV Remote:Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume of the sound bar. To enable/disable this function, Press and Hold the Power ( ) and Volume Up ( + )buttons for 5 seconds.Energy StarEnable Energy Star:Disable Energy Star:When the Energy Star setting is enabled, the sound bar will automatically power down after a period of inactivity. When disabled, the sound bar will remain powered on until you turn it off. To enable/disable this function, Press and Hold the Power ( ) and Volume Down (—)buttons for 5 seconds.Note: Energy Star setting is enabled by default.

There is no power.• Press the POWER button on the remote control or on the top of your Sound Bar.• Ensure the power cord is securely connected.• Plug a different device into the electrical outlet to verify that the outlet is working correctly.There is no sound.• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.• Press MUTE on the remote to ensure the Sound Bar is not muted.• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio. • On digital inputs, the input LEDs will ﬂash rapidly if an unsupported format is present. Set the source to output PCM.• Your TV may be set to variable audio output. Conﬁrm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.I hear buzzing or humming.• Ensure all cables and wires are securely connected.• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be with the original device.• Connect your device to a different input on the Sound Bar.The remoteisn’t working.• Replace the remote batteries with new ones.• Point the remote directly at the center of the Sound Bar when pressing a button.• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application. (e.g., Pandora doesn’t support the Back button.)HELP & TROUBLESHOOTINGThere are 3 functions that are triggered by 3 different button combinations on the Sound Bar.

Do You Have Questions? Find Answers AtFind help with:• New Product Setup• Connecting Your Devices• Technical Problems• Product Updates• And MoreSUPPORT.VIZIO.COMYou can also contact our award-winning support team at:Phone:Email:(877) 878-4946 (TOLL-FREE)techsupport@VIZIO.comHours Of Operation: Monday - Friday: 7 am TO 11 pm (CST) Saturday - Sunday: 9 am TO 6 pm (CST)Live Chat Support AvailableTake A Moment To Register Your Product AtVIZIO.COM/PRODUCT-REGISTRATIONREGISTER YOUR VIZIO PRODUCT NOWCustomized SupportGet assistance quickly with your information on-hand.News & OffersTake advantage of the latest news and special offers from VIZIO.Safety & SatisfactionStay up to date with important product updates and notifications.Why Register?

Do You Have Questions? Find Answers AtFind help with:• New Product Setup• Connecting Your Devices• Technical Problems• Product Updates• And MoreSUPPORT.VIZIO.COMYou can also contact our award-winning support team at:Phone:Email:(877) 878-4946 (TOLL-FREE)techsupport@VIZIO.comHours Of Operation: Monday - Friday: 7 am TO 11 pm (CST) Saturday - Sunday: 9 am TO 6 pm (CST)Live Chat Support Available

ON PARTS AND LABORCovers units purchased as new in United States and Puerto Rico OnlyVIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM Saturday and Sunday, Paciﬁc Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.Parts and LaborThere will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertiﬁed at VIZIO’s option and sole discretion. Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.Type of ServiceDefective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center.Limitations and ExclusionsVIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modiﬁcations or adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABIL-ITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION.ONE-YEAR LIMITED WARRANTYSound Bar: Two 3” High-Efﬁciency Full-Range Transducers Two 2” x 4” Bass Radiators Inputs: One 3.5mm Stereo Audio One RCA Stereo Audio One Optical (Toslink) One Digital Coaxial Audio Bluetooth (Wireless)Sound Pressure Level (System): 98 dBFrequency Response (System): 70 Hz - 19 KHzVoltage: 120 VAC, 60 HzCompliances: UL, C-UL, FCCSPECIFICATIONSFCC Class B Radio Interference StatementNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Notice:1. The changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modiﬁcation to this equipment. It is the responsibilities of the user to correct such interference.RF Exposure InformationThis device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.IC StatementOperation is subject to the following two conditions: 1. This device may not cause interference, and2. This device must accept any interference, including interference that may cause undesired operation of the device.IC Radiation Exposure StatementThis equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Disposal and RecyclingYou must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options.Other:Image(s) used under license from Shutterstock.comLEGAL & COMPLIANCE

environment. FCC Class B Radio Interference StatementNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer-ence received, including interference that may cause undesired operation.Notice:1. The changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modication to this equipment. It is the responsibilities of the user to correct such interference.RF Exposure InformationThis device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.IC Statement 2. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IC Radiation Exposure StatementThis equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled Disposal and RecyclingYou must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options.Other:Image(s) used under license from Shutterstock.comFor DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. DTS, Inc. All Rights Reserved.For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruVolume is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.This product qualies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating.We want to help you save energy.LEGAL & COMPLIANCEThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. ( 1 ) Ce dispositif ne peut causer d'interférences ; etCet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes :( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.

© 2014 VIZIO INC. ALL RIGHTS RESERVED. 140729OC-US-NC

Navigation menu