Zylux Acoustic SB3830C6M 38 inch Sound Bar 3.0 System User Manual
Zylux Acoustic Corporation 38 inch Sound Bar 3.0 System
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2526718 |
| Application ID | F4Prv5j0QLEBj4O5tfrs1g== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 186.67kB (2333378 bits) |
| Date Submitted | 2015-02-07 00:00:00 |
| Date Available | 2015-02-07 00:00:00 |
| Creation Date | 2015-02-06 13:33:44 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-02-06 13:33:44 |
| Document Title | User manual.pdf |
| Document Creator | Adobe InDesign CC 2014 (Macintosh) |
| Document Author: | Daria |
VIZIO
QUICK START GUIDE
Model: SB3830-C6M
IMPORTANT SAFETY INSTRUCTIONS
5
(
% (
be observed for its installation, use, and maintenance. Please read the following safety instructions
before operating your Unit. Keep these instructions in a safe place for future reference.
⢠Read these instructions.
⢠Keep these instructions.
⢠Heed all warnings.
⢠Follow all instructions.
⢠Do not use this apparatus near water.
⢠Clean only with a dry cloth.
⢠Do not block any ventilation openings. Install in accordance with the manufacturerâs
instructions.
⢠Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
) +
⢠2 ' $ '
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
(
⢠Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
⢠1 7
⢠(( ( (
(
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
⢠Unplug this apparatus during lightning storms or when unused for long periods of time.
⢠& ; &
been damaged in any way, such as when the power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
⢠% (<
connecting other components to your Unit.
⢠= 2
use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.
⢠Always use the accessories recommended by the manufacturer to insure compatibility.
⢠When moving your Unit from an area of low temperature to an area of high temperature,
(
electric shock, or component damage.
⢠Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of your Unit and to protect it from overheating, be sure these openings
are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper
ventilation is provided.
⢠Never push any object into the slots and openings on your Unit enclosure. Do not place any
> 2
Never spill liquids on your Unit.
⢠( * %
power, unplug the power cord.
⢠2 / 1
electric shock.
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
The wall socket should be located near your Unit and be easily accessible
Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water
penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in
Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent,
unplug the power cord and contact your dealer immediately. Do not try to repair your
unit yourself.
Avoid using dropped or damaged appliances. If your Unit is dropped and the housing
is damaged, the internal components may function abnormally. Unplug the power cord
electric shock.
Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in
Ensure that the power cord and any other cables are unplugged before moving your Unit.
When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may
used for an extended period of time, unplug the power cord.
To reduce risk of electric shock, do not touch the connector with wet hands.
Insert the remote control batteries in accordance with instructions. Incorrect polarity may
cause the battery to leak which can damage the remote control or injure the operator.
See the important note and rating located on the back of the unit.
!"!#$% & % ' (
& & ) * + /
to dripping, splashing, rain, or moisture.
%"1!$2 /
Do not leave the batteries exposed to direct sunlight for a long period of time with doors and
2
Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
!"!#4% ( /
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
Explanation
of WARNING
symbols:
% *
&
alert the user to the presence of not isolated dangerous voltage within the product
=
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and servicing instructions in the literature
accompanying the appliance.
Warning: This equipment is a Class II or double insulated electrical appliance. It
has been designed in such a way that it does not require a safety connection
to electrical earth.
TABLE OF CONTENTS
Package Contents ...................................................................
Controls & Connections .........................................................
First-Time Setup......................................................................
Using the Remote ...................................................................
LED Indicators .........................................................................
Bluetooth Pairing....................................................................
Using Bluetooth Mode ...........................................................
Advanced Setup ......................................................................
Connecting a Subwoofer ......................................................
Using Button Combinations ..................................................
Wall-Mounting the Sound Bar ...............................................
One-Year Limited Warranty ...................................................
; ..........................................................................
Legal & Compliance ................................................................
11
12
14
15
16
17
18
19
26
26
27
PACKAGE CONTENTS
\2 ; ]
Power Cable
2 x Sound Bar
Wall Mount
Brackets
Remote Control with
2 x AAA Batteries
Coaxial Audio
Cable
Stereo RCA
to 3.5mm
Audio Cable
2 x Wall
Mount Screws
(Size: M4 x 10mm)
This Quick
Start Guide
Digital Optical
Cable
Wall Mount
Template
CONTROLS & CONNECTIONS
Back of Sound Bar
USB* (6)
USB In
Power Port
OPTICAL (4)
Digital Optical
Audio In
DIGITAL (3)
Coaxial In
SUB OUT
Subwoofer Out
` ; {
AUX (1)
Analog Audio In
(Stereo RCA)
AUX (2)
Analog Audio In
(Stereo 3.5mm)
Bluetooth Input Hold to pair.
(See âBluetooth Pairingâ for more information.)
Volume Increase or decrease the loudness
of the audio.
Input Press to change the audio source.
Power|
Top of Sound Bar
<
FIRST-TIME SETUP
CHOOSE ONE CABLE
GOOD
OR
BETTER
Back of Sound Bar
DIGITAL OPTICAL
CABLEâ
DIGITAL COAXIAL
CABLEâ
3.5MM TO
RCA CABLE
3.5MM TO
RCA CABLE
BETTER
BETTER
GOOD
GOOD
AND CONNECT
IT TO YOUR TV
* Not all TVs have the audio outputs shown above. To connect the
Sound Bar directly to your other devices (Blu-Ray player, game
system, etc.) see your deviceâs user manual.
â When using either of the Digital Inputs, if there is no audio: (A)
try setting the TV output to PCM or (B) Connect directly to your
Blu-ray/other source, some TVs do not pass through digital audio.
2
Connect the power cable to the
Sound Bar AC IN as shown.
Plug the power cable into an
electrical outlet.
3
For the best surround sound experience, position the Sound Bar as shown.
The Sound Bar should be close to ear level.
Sound Bar is centered
below the TV.
4
Top
Remove the battery cover
by gently sliding it away
from the remote.
Turn your TV on, the Sound Bar will automatically
turn on and begin searching for an active input.
Top
Insert the included batteries
and gently slide the battery
cover back into place.
Input
The LED indicators on the front of the Sound Bar will
begin cycling in pairs through inputs until an audio
source is detected.*
Tip: Pressing the INPUT button will
stop the auto detect function.
You can press the INPUT button to switch between
audio sources. For example, if you connected your
TV to Input 1, set the Sound Bar to Input 1.
` ; ]
%
(
Reset (see the Using Button Combinations section for more information) or press and hold the INPUT button for 3 seconds.
10
Power
USING THE REMOTE
Bluetooth
Press to enter Bluetooth input.
(To enter force pair mode, press and hold for 5 seconds)
Input
Press to change input source.
Power
Press and hold for 3 seconds to enable
| <
Auto Input detect mode.
Enter/Play/Pause
Volume +/Press to select an option.
Press to increase and decrease volume.
Press to play or pause.
Previous
Next
Press to return to previous track.
Press to skip to the next track.
(Changes Treble, Bass, and Center levels)
(Changes Treble, Bass, and Center levels)
TruVolume
Press to enable/disable TruVolume.
Treble
Press to enter treble adjustment mode.
TruSurround HD
Press to enable/disable TruSurround HD.
Bass
Press to enter bass adjustment mode.
Center
Press to enter center adjustment mode.
Mute
Press to mute/unmute.
11
LED INDICATORS
% ÂÂ2" <
Bluetooth
Pairing
LED Indicators are located here.
Description
USB In - USB (6)
Bluetooth
Digital Optical Audio In
Optical (4)
Coaxial In - Digital (3)
Analog Audio In - AUX (2)
Input
LED Behavior
Analog Audio In - AUX (1)
Function
(When searching for device)
Flash from the bottom to
top and back continuously.
Press the INPUT button on the remote to cycle through the available inputs:
⢠Analog Audio In - AUX Stereo RCA (1)
⢠Analog Audio In - AUX Stereo 3.5mm (2)
⢠Coaxial In - Digital (3)
⢠Digital Optical Audio In - Optical (4)
⢠Bluetooth
⢠USB In - USB (6)
Press and hold the button on the remote. The Sound Bar will be discoverable for 15
minutes. You can now search for the Sound Bar (VIZIO SB3830) using your Bluetooth
Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
DTS
TruVolume
TruVolume On
Press the TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and comfortable volume level
for a more enjoyable listening experience.
{
1<
12
Function
LED Behavior
DTS
TruSurround
TruSurround On
1<
Description
Press the TSHD button to enable/disable DTS TruSurround. When enabled (On),
)1<+(
playback in stereo.
Levels
Two center LEDs indicate
Treble level 0.
Press the TREBLE button then press the Next/Previous button to increase/decrease
the treble level. The LED indicators will move to the top with increasing levels and to
the bottom with decreasing levels.
Bass
Levels
Two center LEDs indicate
Bass level 0.
Press the BASS button then press the Next/Previous button to increase/decrease the
bass level. The LED indicators will move to the top with increasing levels and to the
bottom with decreasing levels.
Center
Levels
Two center LEDs indicate
Center level 0.
Press the CENTER button then press the Next/Previous button to increase/decrease
the center level. The LED indicators will move to the top with increasing levels and to
the bottom with decreasing levels.
Treble
When a Dolby
Digital / DTS signal
is detected.
Dolby Digital / DTS
Indicator LED
Dolby Digital and DTS are only available on either the Coaxial In or Digital Optical
Audio In inputs.
When a Dolby Digital or DTS signal is detected, the Dolby Digital (White) / DTS (Orange)
indicator LED will light up for 3 seconds before fading.
13
BLUETOOTH PAIRING
To pair the Sound Bar with a Bluetooth device:
1. Press and hold the Bluetooth button
on the Sound
on the remote for
Bar or the Bluetooth button
)Â+ ; ] ]
Pairing Mode, the LED Indicators on the Display Panel
on the front of the Sound Bar will light sequentially
from bottom to top and back again.
Once the device is paired, the LED Indicators will stop
*
2.
You can now search for the Sound Bar (VIZIO SB3830)
using your Bluetooth device. For more information, refer
to the user documentation that came with the device.
3.
Play audio from your Bluetooth device. Volume can be
controlled on your source device and the Sound Bar.
Top of Sound Bar
Bluetooth Device
14
USING BLUETOOTH MODE
Your Sound Bar supports music streaming from
smartphones, tablets, and computers with Bluetooth
capability. Device compatibility will vary, see your
deviceâs documentation for more information. Once
you have paired your source device to the Sound Bar,
as long as you stay within range of the Sound Bar, your
device should remain paired, even if you change the
input on the Sound Bar.
Maximizing Signal
A Bluetooth signal has a range of up to 30 feet. Keep
in mind that Bluetooth is a compressed audio format,
so streamed music may lose some integrity when
compared to a wired connection.
Try the following if your sound quality is less than
optimal:
⢠If you hear any break-up or disconnect while streaming music from
your device, move the source device closer to the Sound Bar.
⢠Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source device.
⢠1 < ] (
security cameras, wireless video baby monitors, cordless phones, and
% <
Bluetooth range.
Your Sound Bar is not equipped with a
microphone, so it cannot operate as a
hands-free device for a smartphone.
Reduce the volume levels on your device
and on the Sound Bar before pressing
Play. High volume levels can damage your
hearing.
15
ADVANCED SETUP
Back of Sound Bar
DIGITAL OPTICAL
CABLE
USB Thumb
Drive*
Game Console
DIGITAL COAXIAL
CABLE
Network Media
Player
16
3.5MM TO
RCA CABLE
3.5MM TO
RCA CABLE
Tablet/MP3 Player/Laptop
` ; {
CONNECTING A SUBWOOFER
Back of Sound Bar
RCA Subwoofer Cable*
To connect a subwoofer:
1.
Press the BASS button on the remote control to enter bass
adjustment mode.
2.
Use the Previous/Next buttons to adjust the bass level to the
center position.
3.
Power the Sound Bar and Subwoofer. Connect an RCA cable
from the Sound Bar to the Subwoofer.
4.
Power On the Sound Bar and Subwoofer.
5.
Manually adjust the SUB gain (Volume) and phase to your
preference. See your subwooferâs user manual for more
information.
6.
Use the BASS button on the remote control to adjust the
subwooferâs output.
Optional Subwoofer*
17
* RCA subwoofer cable and subwoofer not included.
USING BUTTON COMBINATIONS
Buttons are located here.
%
Â
Function
Factory
Reset
Â<
; ]
LED Behavior
All 12 LEDs will
*Â
Description
Reset the Sound Bar to the factory default settings. To perform a Factory
Reset, Press and Hold the Bluetooth( ) and Volume Down (â) buttons for
5 seconds.
Note: This will erase all settings and preferences that you have set.
VIZIO TV
Remote
Control
Energy
Star
VIZIO TV
Remote Enabled
VIZIO TV
Remote Disable
Energy Star
Enabled
Energy Star
Disabled
Enable/disable the use of a VIZIO TV remote control to power on and
adjust the volume of the sound bar. To enable/disable this function,
Press and Hold the Power ( ) and Volume Up ( + ) buttons for 5 seconds.
Note: This function is enabled by default.
When the Energy Star setting is enabled, the sound bar will automatically
power down after a period of inactivity. When disabled, the sound bar
<% 7
function, Press and Hold the Power ( ) and Volume Down (â) buttons
for 5 seconds.
Note: Energy Star setting is enabled by default.
18
WALL-MOUNTING THE SOUND BAR
Back of Sound Bar
Wall-Mount Screw Holes
Insert the two wall-mount screws into the wall-mount screw
holes, and then tighten them with a Phillips screwdriver.
Place the included wall mounting template against the wall
under your TV. Mark the four bracket holes using a pencil.
19
3
Be sure your screws are attached
to wood studs, drywall anchors
(for drywall), or concrete anchors
(for brick/concrete walls).
Screws for attaching the brackets to the wall are not included.
Choose the screw type and length
appropriate to your homeâs
construction. If in doubt, consult a
professional installer.
30.9
5 in
If you are unfamiliar with power tools or the
layout of electrical wiring in the walls of your
home, consult a professional installer.
20
(78.
60 c
m)
Wall Mount Screw
Screw Size: M4 x 10
VIZIO RECOMMENDS
Picture Perfect. Simply Smart.
All-new for 2015, the E-Series is packaged in a sleek new design. Experience more vibrant colors, more
pronounced darks, more premium apps, and truly epic entertainment at an unbeatable value on the
all-new, beautifully redesigned E-Series.
Available at VIZIO.com
21
Product sold separately
VIZIO RECOMMENDS
VIZIO High-Speed HDMIÂŽ Cable
This high-speed HDMIÂŽ \2%{ ; ÂÂÂÂ Â / Â \ 2
resolutions, the E-Series HDMI cable provides picture-perfect HD video, 3D, and superior audio, all at up
to 18 Gbps. This all-in-one cable also supports advanced 7.1 surround sound and Audio Return Channel,
eliminating the need for additional cables.
Available at VIZIO.com
22
Product sold separately
HELP & TROUBLESHOOTING
There is no power.
⢠Press the POWER button on the remote control or on the top of your Sound Bar.
⢠Ensure the power cord is securely connected.
⢠| <
â˘
â˘
â˘
â˘
There is no sound.
"
| Volume Up on the remote control or on the top of your Sound Bar.
Press MUTE on the remote to ensure the Sound Bar is not muted.
Press INPUT
; ] <
When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source, some TVs do not pass through digital audio.
⢠1 ( ÂÂ2* ; |Â
⢠5 %{ FIXED or STANDARD, not
VARIABLE. Consult your TVâs user manual for more detailed information.
⢠" ] (
I hear buzzing or
humming.
⢠Ensure all cables and wires are securely connected.
⢠<
)%{(] $ ( +
⢠<
; ]
The remote
Â
⢠Replace the remote batteries with new ones.
⢠Point the remote directly at the center of the Sound Bar when pressing a button.
⢠If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application.
) (| Â ] +
23
'' " (
Take A Moment To Register Your Product At
VIZIO.COM/PRODUCT-REGISTRATION
Why Register?
Customized Support
Get assistance quickly with your information on-hand.
News & Offers
Take advantage of the latest news and special offers from VIZIO.
Safety & Satisfaction
Stay up to date with important product updates and notifications.
REGISTER YOUR VIZIO PRODUCT NOW
Do You Have Questions? Find Answers At
SUPPORT.VIZIO.COM
Find help with:
⢠New Product Setup
⢠Connecting Your Devices
⢠Technical Problems
⢠Product Updates
⢠And More
Live Chat
Support Available
You can also contact our
award-winning support team at:
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Hours Of Operation:
Monday - Friday: 7 AM TO 11 PM (CST)
Saturday - Sunday: 9 AM TO 6 PM (CST)
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of
commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 7:00AM to 11:00PM Monday through Friday
and 9:00AM to 6:00PM Saturday and Sunday, Central Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER.
Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
%
| {"Â"1Â
Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping
to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
| {"Â"1Â
' / < &
{"Â"1% ;
provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIOâs one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation,
( ( (#(
( > ( $
issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not
covered. This one year limited warranty does not cover Products sold âAS ISâ, âFACTORY RECERTIFIEDâ, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIOâS TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES
RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIOâS NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL
IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE
OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION.
SPECIFICATIONS
Sound Bar:
Inputs:
Two 2.75â Full-Range Drivers (Left & Right)
One 1.6â x 3.5â Full-Range Driver (Center)
Two Passive Radiators
One 3.5mm Stereo Audio
One RCA Stereo Audio
One Optical (Toslink)
One Digital Coaxial Audio
Bluetooth (Wireless)
One USB
Sound Pressure Level (System):
100 dB
Frequency Response (System):
60 Hz to 19 KHz
Voltage:
100~120 VAC, 50/60 Hz
Compliances:
UL, FCC, cUL, NRCAN, NOM
26
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
(
& <(
measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
Â
& <
4.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice:
Â
% / Â &
2.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
Â
%
%{
' & "
RF Exposure Information
This device meets the governmentâs requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
IC Statement
This device complies with Industry Canadaâs licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
 /  &
Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada .
Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interfĂŠrences ; et
( 2 ) Ce dispositif doit accepter toute interfĂŠrence ,
y compris les interfĂŠrences qui peuvent causer un mauvais fonctionnement de l'appareil.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this
product contains electronic components and a battery, it must be disposed of separately from
household waste. Contact local authorities to learn about disposal and recycling options.
Other:
Image(s) used under license from Shutterstock.com
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks,
and DTS TruSurround is a trademark of DTS, Inc. DTS, Inc.
All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks,
and DTS TruVolume is a trademark of DTS, Inc. Š DTS, Inc.
All Rights Reserved.
% & Â! #5 ;% Â
defaultâ setting and this is the setting in which power savings
will be achieved. Changing the factory default settings or
enabling other features will increase power consumption
that could exceed the limits necessary to qualify for ENERGY
STAR rating.
We want to help you save energy.
Š 2015 VIZIO INC. ALL RIGHTS RESERVED.
150126OC-US-NC
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Daria Create Date : 2015:02:06 13:33:44+08:00 Modify Date : 2015:02:06 13:33:44+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2015:01:27 17:48:20+08:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:df622cb8-d852-4523-8247-6f9ec93c80a9 Original Document ID : xmp.did:419ABB10362268118C1495D09F68B44B Document ID : xmp.id:04525af3-02d1-4bed-a77c-ac0d083bab9b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:63d8e876-f3a0-44db-9f3c-40d5f8a08647 Derived From Document ID : xmp.did:472f1d53-1945-4a51-9112-e67dd1304321 Derived From Original Document ID: xmp.did:419ABB10362268118C1495D09F68B44B Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2015:01:26 14:02:40-08:00 Format : application/pdf Creator : Daria Title : User manual.pdf Producer : Acrobat Distiller 9.0.0 (Windows) Trapped : False Page Count : 28EXIF Metadata provided by EXIF.tools