Zylux Acoustic SIRTTR1 Sirius TTR1 Radio User Manual

Zylux Acoustic Corporation Sirius TTR1 Radio

User Manual

Need TTR1 LogoUser Guide
3Table of ContentsIntroduction....................5Features ............................6Safety and Care Information . . . . . . . . . . .7What’s in the Box? . . . . . . . . . . . . . . . . . . .9SIRIUS TTR1 Radio Functions . . . . . . . . . 10Remote Control.....................12Display Screen......................13Installation ...................15Introduction........................16Step 1: Connect to a Network . . . . . . . . . 17Step 2: Enter Your SIRIUS Account Information...................... 30Using your SIRIUS TTR1 Radio . . 33Navigation Basics . . . . . . . . . . . . . . . . . . 34Direct Tune........................ 38Favorite Channels . . . . . . . . . . . . . . . . . . 39Alarm Clock .......................40Snooze ........................... 42Sleep Timer ....................... 43Parental Control . . . . . . . . . . . . . . . . . . . 44Equalization (EQ). . . . . . . . . . . . . . . . . . . 50Configuring your SIRIUS TTR1 Radio...................... 53SIRIUS setup ...................... 54System Setup...................... 58Troubleshooting. . . . . . . . . . . . . . . .73Product Specifications . . . . . . . . . .77Patent Information . . . . . . . . . . . . . . . . . .79Environmental Information . . . . . . . . . . .79Owner’s Record . . . . . . . . . . . . . . . . . . . 82
4
5Introduction
6FeaturesCongratulations, on your purchase of the SIRIUS TTR1 Radio!Your new SIRIUS TTR1 Radio comes with everything you need to enjoy SIRIUS radio in your home.Use this manual to familiarize yourself with all of your SIRIUS TTR1 Radio features and capabilities. For the latest information about your SIRIUS TTR1 Radio and other SIRIUS products and accessories, visit http://www.sirius.com.Please read the entire User Guide before using your SIRIUS TTR1 Radio!Introduction
7Safety and Care Information IMPORTANT! Always read and understand all the instructions to avoid injury to yourself and/or damage to your device. SIRIUS XM Radio Inc. disclaims all responsibility for damage from data loss due to breakdown, repair, or other causes. • Do not expose to extreme temperatures (above 140ûF or below -4ûF, or above 60ûC or below -20ûC).• Do not expose to moisture. Do not use device near or in water. • Do not let any foreign matter spill into device.• Do not store in dusty areas.• Do not expose to chemicals such as benzene and thinners. Do not use liquid or aerosol cleaners. Clean with a soft damp cloth only.• Do not expose to direct sunlight, fire, flame or other heat sources for a prolonged period.• Do not try to disassemble and/or repair device yourself.• Do not drop your device or subject it to severe impact.• Do not place heavy objects on device.• Do not subject device to excessive pressure.• If the screen is damaged, do not touch the liquid crystal fluid.
8WARNING!• Opening the case may result in electric shock.• Make sure that you insert the plug all the way into the outlet.• Do not touch the device with wet hands.• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.• Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.Introduction
9What’s in the Box?SIRIUS TTR1 Radio1 2 3 5 6 7 8 9 0 BACK MENUTUNE VOLALARM 1 ALARM 24Remote ControlMENUMUTEBACK OKALARM1ALARM22 3 416 7 8509
10SIRIUS TTR1 Radio FunctionsIntroduction1 2 3 5 6 7 8 9 0 BACK MENUTUNE VOLALARM 1 ALARM 24Power ButtonTurn radio on and off.Back ButtonPress to return back to the previous display screen. TUNE Knob (Multifunction)Turning the knob at the default display screen displays the category tune screen; pressing the knob at the default display screen displays the direct tune screen; turning the knob in a menu or user input screen scrolls through menus and choices; pressing the knob in a menu or user input screen selects a highlighted item; pressing and holding displays the Parental control menu.Volume KnobIncreases or decreases volume; also mutes the audio.0-9 Number ButtonsSet and select and select channels.Menu ButtonPress to access or exit category and channel tuning, advanced features, and configuration options.Alarm 1 / Alarm 2 ButtonsTurns the alarm clocks On or Off; pressing and holding displays the alarm settings.
11Snooze/Sleep Timer ButtonMutes the alarm for, or sets the sleep timer for, 5, 10, 15, 30, 45, or 60 minutes.Rear CompartmentWired Ethernet ConnectorLine Out ConnectorAux In ConnectorHeadphone Connector
12Remote ControlIntroductionMENUMUTEBACK OKALARM1ALARM22 3 416 7 8509Power ButtonTurn radio on and off.OK Button Press to confirm selection for channel and menu items.Back Button Press to return back to the previous display screen.Menu Button Press to access or exit advanced features and configuration options.0-9 Number Buttons Set and select channels.Arrow ButtonsPress to scroll through lists; also highlight menu options.+/— ButtonsPress to increase or decrease the audio volume.MutePress to silence the audio.Alarm 1 / Alarm 2Press to turn the respective alarm clock On or Off; pressing and holding displays the alarm settings.
13Display ScreenWhen using the SIRIUS TTR1 Radio, information about songs and artists, and radio functions are displayed.Category or ChannelList ScreenPhishFirst TubeJam_ONSIRIUS 017 5:23PMMain Display ScreenMenu Options ScreenChannel NameArtist Name orTalk Show HostSong Title orTalk Show ScheduleAlarm 1/2 On IndicatorPresetNumber(Favorites)Audio isMutedAlarmSnoozeCountdownCurrent TimeChannel NumberNetwork ConnectionType (wired)Network ConnectionType (wireless)Signal Strength(wireless)1 2P 1
14
15Installation
16IntroductionThe SIRIUS TTR1 Radio allows you to listen to all of the channels on the Sirius Internet Radio service using either a wireless Internet connection (Wi-Fi), or using a wired Ethernet connection.You must be subscribed to the SIRIUS Internet Radio service to use the SIRIUS TTR1 Radio. Go to www.sirius.com/siriusinternetradio or call 888-539-7474 to subscribe and get your user name and password. You can add this service to your SIRIUS subscription, or subscribe only to the SIRIUS Internet Radio service. To verify that you are subscribed to service, go to www.sirius.com, click on the LISTEN ONLINE link, and then click the LAUNCH PLAYER link. Enter your username and password. Select a channel to listen to and then click on the PREMIUM link. If you can listen in the Premium mode, then you are subscribed to the SIRIUS Internet Radio service.The SIRIUS TTR1 Radio supports a wireless Internet connection through any standard 802.11b/g access point. This includes wireless networks which are WEP/WPA/WPA2 protected and require a password, and wireless networks where the network name (SSID) is hidden. Once you have connected to a wireless network, the radio will remember your network settings so you will not have to enter the information again, unless you perform a reset of the radio to the factory defaults.Installation
17Step 1: Connect to a NetworkWhen you turn your SIRIUS TTR1 Radio On for the first time, the Network settings screen is displayed while the radio searches for wireless networks. When complete, the SSID screen is displayed with a list of the wireless networks found, along with several other menu options.Decide whether you will be using a wired Ethernet connection, or a wireless connection. Then complete the instructions in the appropriate following section.To Connect to a Network Using the Network WizardTo connect to a wireless network using the Network Wizard:The Network Wizard feature is the easiest way to connect to a wireless network. It searches for available wireless networks and displays a list of wireless networks found, for you to select. However, if your wireless network name (SSID) is hidden, or if your network is DHCP disabled, you’ll have to manually enter the network settings using the Manual Settings or [Manual config] menu option rather than using the Network Wizard.If the wireless network is secured, you’ll need to enter the password for the wireless network during the connection procedure. If you don’t know the password, contact your network administrator of the person who setup the wireless network.a. If you have just turned your SIRIUS TTR1 Radio on for the first time, the SSID screen will already be displayed. Skip ahead to step 5.Network wizardScanning.../Network settings
18b. Press MENU and turn the TUNE knob to highlight System Setup. Press the TUNE Knob.c. Turn the TUNE knob to highlight Network. Press the TUNE Knob.d. Press the TUNE Knob to select Network Wizard.e. The radio will scan for wireless networks and return with a list of wireless networks which were found. Turn the TUNE knob to highlight your wireless network and press the TUNE knob. If you don’t know the network name, contact your network administrator of the person who setup the wireless network.f. If you choose an unsecured network, and the radio is able to connect to the wireless network, the Connected screen will be displayed and the radio will connect to the wireless network. Skip to step h. If you choose a network that is secured, you will be prompted to enter the key (password). If you don’t know the password, contact your network administrator of the person who setup the wireless network. Turn the TUNE knob to scroll through the list of characters and highlight each character. Press the TUNE knob to select the highlighted character and move to the next character. If you make a mistake, turn the InstallationConnectedConnectedKey:BKSPOKCANCEL0123456789., abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUYour_Network_NameOther_Network_Name [Rescan][Wired][Manual config] SSID
19TUNE knob to highlight BKSP and press the TUNE knob to erase the character. Remember that the key is case sensitive.g. When the key has been entered, turn the TUNE knob to scroll to highlight OK and press the TUNE knob. If you have entered the correct key, and the radio is able to connect to your wireless network, the Connected screen will be displayed. If you have entered the wrong key, the Incorrect key screen is displayed, and you will be prompted to enter the key again.h. If you are installing your SIRIUS TTR1 Radio for the first time, continue with “Step 2: Enter Your SIRIUS Account Information” on page 30. If you have previously entered your SIRIUS user name and key into the radio, and had tuned to a channel, the screen will show Connecting. When successfully connected, the Buffering... screen will be displayed as the channel information is streamed to the radio. When complete, you are returned to the main display screen and you should hear the audio playing. Otherwise, the SIRIUS screen is displayed.Connecting./SIRIUS Hits 1SIRIUS3:13PMBuffering.../SIRIUS Hits 1SIRIUS 001 3:14PMIncorrectkey
20To connect to a wired network using the Network Wizard:a. At the rear of the radio, remove the compartment cover and connect an Ethernet cable to the Ethernet connector on the inside left of the compartment. Refer to “Wired Ethernet Connector” on page 11 for the location of the Ethernet connector. Replace the compartment cover.b. Connect the other end of the Ethernet cable to your home’s wired network.c. If you have turned your SIRIUS TTR1 Radio on for the first time, the SSID screen will already be displayed. Skip ahead to step g.d. Press MENU and turn the TUNE knob to highlight System Setup. Press the TUNE Knob.e. Turn the TUNE knob to highlight Network. Press the TUNE Knob.f. Press the TUNE Knob to select Network Wizard.g. The radio will scan for networks. When the scan is complete, turn the TUNE knob to highlight [Wired] and press the TUNE knob.h. If the radio is able to connect to your network, the Connected screen InstallationConnectedConnectedNetwork wizardScanning.../Network settingsSome Network NameOther Network Name [Rescan][Wired][Manual config] SSID
21will be displayed. If Waiting for Ethernet is displayed, check the Ethernet cable connections.i. If you are installing your SIRIUS TTR1 Radio for the first time, continue with “Step 2: Enter Your SIRIUS Account Information” on page 30. If you have previously entered your SIRIUS user name and key into the radio, and had tuned to a channel, the screen will show Connecting. When successfully connected, the Buffering... screen will be displayed as the channel information is streamed to the radio. When complete, you are returned to the main display screen and you should hear the audio playing. Otherwise, the SIRIUS screen is displayed.Buffering.../SIRIUS Hits 1SIRIUS 001 3:14PMConnecting./SIRIUS Hits 1SIRIUS3:13PMWaiting forEthernetNetwork settings
22To Connect to a Network Using Manual SettingsConnecting to a network using the Manual settings requires some knowledge of your network. You’ll need to manually configure your network connection using the Manual Settings or [Manual config] option if your wireless network name (SSID) is hidden, or if your network is DHCP disabled.Decide whether you will be using a wireless network connection, or a wired Ethernet connection. Then follow the instructions in the appropriate following section.To connect to a wireless network using the Manual Settings:In order to connect to a wireless network, you will need to have the following information to enter during the procedure:Is DHCP enabled or disabled? If disabled, the IP address to use for the radio? If disabled, the Subnet Mask IP address? If disabled, the Gateway IP address? If disabled, the Primary DNS IP address? If disabled, the Secondary IP address?The name of your wireless network (SSID)?Is the wireless network password protected? If so, the type of authentication? If Pre-Shared Key, whether WEP is enabled? If WPA or WPA2, whether it’s TKIP or AES?The wireless network key (password)?Installation
23a. If you have just turned your SIRIUS TTR1 Radio on for the first time, the SSID screen will already be displayed. Skip ahead to step 4.b. Press MENU and turn the TUNE knob to highlight System Setup. Press the TUNE Knob.c. Turn the TUNE knob to highlight Network. Press the TUNE Knob.d. Turn the TUNE Knob to highlight Manual Settings or [Manual config]. Press the TUNE Knob. e. Turn the TUNE Knob to highlight Wireless. Press the TUNE Knob.f. Will you be using DHCP? Turn the TUNE Knob to highlight DHCP enable or DHCP disable and press the TUNE Knob.g. If you have selected DHCP disable, enter the following information. Otherwise, continue with step h. For each entry, Turn the TUNE knob to select the numbers, and press the TUNE knob to confirm and move to the next number. Press BACK if you entered an incorrect number.TIP! You can use the Remote Control to increment the numbers ( ), and move forward or backward through the number fields ( + and —).i. Enter the IP address to use for the radio.ii. Enter the Subnet Mask IP address for the network.WiredWireless>>Connection type 1/9
24Installationiii. Enter the Gateway IP address for the network.iv. Enter the Primary DNS IP address for the network.v. Enter the Secondary DNS IP address for the network.h. Enter your wireless network name (SSID). Turn the TUNE knob to scroll through the list of characters and highlight each character. Press the TUNE knob to select the highlighted character and move to the next character. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob to erase the character. When done, turn the TUNE knob to highlight OK and press the TUNE knob. i. Select the authentication type, Open (no key (password)), Pre-Shared key, WPA, or WPA2. Turn the TUNE Knob to highlight your selection and press the TUNE knob. If you have selected Open, skip ahead to step 10.j. Depending upon your selection, complete these additional steps:•Pre-Shared Key:i. Select whether the Pre-Shared Key has WEP encryption disabled or Key: 9/9BKSPOKCANCEL0123456789., abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUOpenPre-Shared KeyWPAWPA2>Authentication 7/9IP settings 3/9IP address.0.0.0Subnet mask.255 255 .255 .00
25disabled. Turn the TUNE Knob to highlight your selection and press the TUNE knob.ii. Enter your key (password). Turn the TUNE knob to scroll through the list of characters and highlight each character. Press the TUNE knob to select the highlighted character and move to the next character. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob erase the character.•WPA or WPA2:i. Select whether WPA or WPA2 has TKIP or AES encryption. Turn the TUNE Knob to highlight your selection and press the TUNE knob.ii. Enter your key (password). Turn the TUNE knob to scroll through the list of characters and highlight each character. Press the TUNE knob to select the highlighted character and move to the next character. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob to erase the character. When done, turn the TUNE knob to highlight OK and press the TUNE knob. k. If you have entered the correct information, and the radio is able to connect to your wireless network, the ConnectedConnectedFailed to connect
26Connected screen will be displayed. If not, the Failed to connect screen is displayed. This means that one or more of the settings you entered is incorrect.l. If you are installing your SIRIUS TTR1 Radio for the first time, continue with “Step 2: Enter Your SIRIUS Account Information” on page 30. If you have previously entered your SIRIUS user name and key into the radio, and had tuned to a channel, the screen will show Connecting. When successfully connected, the Buffering... screen will be displayed as the channel information is streamed to the radio. When complete, you are returned to the main display screen and you should hear the audio playing. Otherwise, the SIRIUS screen is displayed.InstallationConnecting./SIRIUS Hits 1SIRIUS3:13PMBuffering.../SIRIUS Hits 1SIRIUS 0013:14PM
27To connect to a wired network using the Manual Settings:In order to connect to a wired network, you will need to have the following information to enter during the procedure:Is DHCP enabled or disabled? If disabled, the IP address to use for the radio? If disabled, the Subnet Mask IP address? If disabled, the Gateway IP address? If disabled, the Primary DNS IP address? If disabled, the Secondary IP address?a. At the rear of the radio, remove the compartment cover and connect an Ethernet cable to the Ethernet connector on the inside left of the compartment. Refer to “Wired Ethernet Connector” on page 11 for the location of the Ethernet connector. Replace the compartment cover.b. Connect the other end of the Ethernet cable to your home’s wired network.c. If you have just turned your SIRIUS TTR1 Radio on for the first time, the SSID screen will already be displayed. Skip ahead to step f. d. Press MENU and turn the TUNE knob to highlight System Setup. Press the TUNE Knob.e. Turn the TUNE knob to highlight Network. Press the TUNE Knob.f. Turn the TUNE Knob to highlight Manual Settings [Manual config]. Press the TUNE Knob.
28g. Turn the TUNE Knob to highlight Wired. Press the TUNE Knob.h. Will you be using DHCP? Turn the TUNE Knob to highlight DHCP enable or DHCP disable and press the TUNE Knob.i. If you have selected DHCP disable, enter the following information. Otherwise, continue with step 7. For each entry, Turn the TUNE knob to select the numbers, and press the TUNE knob to confirm and move to the next number. Press BACK if you entered an incorrect number.TIP! You can use the Remote Control to increment the numbers ( ), and move forward or backward through the number fields ( + and —).i. Enter the IP address to use for the radio.ii. Enter the Subnet Mask IP address for the network.iii. Enter the Gateway IP address for the network.iv. Enter the Primary DNS IP address for the network.v. Enter the Secondary DNS IP address for the network.j. If you have entered the correct information, and the radio is able to connect to your network, the Connected screen will be displayed. If not, the Failed to connect screen is displayed. This means that one or more of the settings you entered IP settings 3/9IP address.0.0.0Subnet mask.255 255 .255 .00InstallationWiredWireless>>Connection type 1/9
29is incorrect. If Waiting for Ethernet is displayed, check the Ethernet cable connections.k. If you are installing your SIRIUS TTR1 Radio for the first time, continue with “Step 2: Enter Your SIRIUS Account Information” on page 30. If you have previously entered your SIRIUS user name and key into the radio, and had tuned to a channel, the screen will show Connecting. When successfully connected, the Buffering... screen will be displayed as the channel information is streamed to the radio. When complete, you are returned to the main display screen and you should hear the audio playing. Otherwise, the SIRIUS screen is displayed.Waiting forEthernetNetwork settingsBuffering.../SIRIUS Hits 1SIRIUS 001 3:14PMConnecting./SIRIUS Hits 1SIRIUS3:13PMConnectedConnectedFailed to connect
30Step 2: Enter Your SIRIUS Account InformationThe SIRIUS TTR1 Radio needs your account user name and password to connect to Sirius Internet Radio service. If are not yet subscribed to the Sirius Internet Radio service, go to www.sirius.com/siriusinternetradio or call 888-539-7474 to subscribe, and get your user name and password.To enter your account information:a. Turn on the radio by pressing the Power button.b. Press MENU and turn the TUNE knob to highlight SIRIUS Setup. Press the TUNE knob.c. Turn the TUNE knob to highlight User name. Press the TUNE knob.d. Turn the TUNE knob to scroll through the list of characters and highlight each character for your user name. Press the TUNE knob to select the highlighted character and move to the next character. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob to erase the character.e. When you have entered your user name, turn the TUNE knob to scroll to highlight OK and press the TUNE knob.User nameBKSPOKCANCEL0123456789 abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWCategory TuneSIRIUS SetupEQParental controlSystem Setup>>>SIRIUSInstallation
31f. You will then be prompted to enter your password. Enter your password in the same way as you entered your user name and then select OK.g. The radio will attempt to connect to the Sirius Internet Radio service. If the user name and password you entered is incorrect, the Login failed screen will be displayed. You’ll have to re-enter the correct user name and password. If you have previously connected to a network, and had tuned to a channel, the screen will show Connecting. When successfully connected, the Buffering... screen will be displayed as the channel information is streamed to the radio. When complete, you are returned to the main display screen and you should hear the audio playing. Otherwise, the SIRIUS screen is displayed. Login failedGo to SIRIUS setupSIRIUSBuffering.../SIRIUS Hits 1SIRIUS 001 3:14PMConnecting./SIRIUS Hits 1SIRIUS 3:13PM
32
33Using your SIRIUS TTR1 Radio
34Using your SIRIUS TTR1 RadioNavigation BasicsPower ButtonThe Power button turns the SIRIUS TTR1 Radio On or Off.Tune KnobThe TUNE knob is multifunction— you can turn it clockwise or counter-clockwise, and press it.• Turn: Turning the TUNE knob when at the main display screen displays the Category tune screen. When in menus or user input screens, turning the TUNE knob scrolls forwards or backwards through menus and user choices.• Press and Release: Pressing the TUNE knob at the default display screen displays the Direct tune screen. When in menus or user input screens, pressing the TUNE knob selects a highlighted item.• Press and Hold: pressing and holding the TUNE knob displays the Parental control menu options.Vol KnobTurning the VOL knob clockwise or counter-clockwise increases or decreases the volume of the audio. When turned counter-clockwise it will mute the audio when zero is reached.Number Buttons 0-9The number buttons are used to store favorite channels in a button location so you can tune a channel just by pressing the button. They can also be used to enter the channel number when at the Direct tune screen.TUNEVOL1 0...
35Back ButtonThe BACK button returns back to the previously displayed screen.Menu ButtonPressing the MENU button from the main display screen accesses the advanced features and configuration options menu, where you can browse the channel categories and channels, and change the radio settings. Pressing it when in the configuration options menu returns the radio to the main display screen.Alarm 1 / Alarm 2 ButtonsPressing the ALARM button turns the respective alarm clock function On or Off. Pressing and holding the ALARM button displays the respective alarm setup screen where you can configure the options for each alarm.Snooze / Sleep ButtonWhen the alarm clock is sounding, pressing the Snooze /Sleep button will silence the alarm for 5 minutes. Each additional press of the Snooze / Sleep button silences the alarm for 10, 15, 30, 45 or 60 minutes. While snoozing, the snooze countdown time is displayed on the display screen.While the radio is playing, pressing the Snooze /Sleep button enters the sleep mode. The first press displays Sleep OFF, and each additional press increses the sleep time for 5, 10, 15, 30, 45 or 60 minutes. While in sleep mode, the sleep countdown time is displayed at the bottom of the display screen.ALARM 1 ALARM 2BACKMENU
36Listening to Sirius Internet RadioTune a Channel:1. Press MENU.2. Press the TUNE knob to select Category Tune.3. Press the TUNE knob to select All Channels to browse through all the channels, or turn the TUNE knob to highlight a category. Press the TUNE knob to select the category.4. Turn the TUNE knob browse through the channels, and highlight a channel to tune. Press the TUNE knob to tune the channel. The radio will momentarily tune the channel.View a Category:Channels are organized into categories to make it easier for you to find the ones that suit your taste.1. To view the categories press MENU.2. Press the TUNE knob to select Category Tune.3. Turn the TUNE knob to browse through 001-SIRIUS Hits 002-The Blend003-SIRIUS XM Love004-40s on 4005-50s on 5All channelsAll Channels PopRockElectronic/DanceHip-Hop/R&B>>>>>Category TuneUsing your SIRIUS TTR1 Radio
37and highlight a category.4. Press the TUNE knob to select the category and view the channels in the category.Returning to Main Display ScreenWhen in the advanced features and configuration options menu, pressing MENU will return you to the main display screen.039-Backspin 040-Hip-Hop Nation045-Shade 45050-The Heat051-Heart & SoulHip-Hop/R&B
38Using your SIRIUS TTR1 RadioDirect TuneA channel can be tuned directly by entering the channel number.1. From the main display screen, press the TUNE button.2. You can use the 0-9 number buttons to enter the channel number. You can also turn the TUNE knob to scroll the list of numbers and highlight each number. Press the TUNE knob to select the highlighted number and move to the next character. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob erase the character.3. When the channel number is entered, turn the TUNE knob to highlight OK. Press the TUNE knob to tune the channel.Direct TuneBKSPOKCANCEL0123456789
39Favorite ChannelsYou can assign up to 10 of your favorite channels to a number button (0-9) so you can easily tune them.To assign a favorite channel to a number button:1. Tune to the channel you want as a favorite.2. Press and hold a number button (0-9) for one second to assign the channel as a favorite (preset) to that button.IMPORTANT! If the button you choose already has a favorite channel assigned to it, it will be replaced with the new favorite channel.To tune a favorite channel: 1. Press the number button 0-9 that is assigned to the favorite channel. The channel will momentarily be tuned.Preset stored
40Alarm ClockYour SIRIUS TTR1 Radio has two alarm clocks which can be configured according to your liking. When the radio is off, and the alarm(s) are on, the times of each alarm are displayed on the screen.To turn the alarm clocks On or Off:1. Press the Alarm 1 or Alarm 2 button to toggle the alarms On or Off. If the alarm(s) are On, the alarm icon(s) 1 2 will be displayed in the lower left of the main display screen.To configure the alarm clock:1. Press MENU. You can also press and hold the alarm button that you want to configure to go directly to the alarm configuration (go to step 4).2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Alarms. Press the TUNE knob.4. The Alarms screen summarizes each alarm clock setting. To configure an alarm, turn the TUNE knob to scroll to and highlight Michael BoltonThat’s What Love Is All ASIRIUS XM LoveSIRIUS 0076:49PM1 2Alarm 1: On [6:30AM]Alarm 2: Off [8:00AM]AlarmsUsing your SIRIUS TTR1 RadioAM4:541 2
41Alarm 1 or Alarm 2. Press the TUNE knob.5. Each alarm has 5 configuration options which are summarized in the following table at the beginning of this section. To change an option, turn the TUNE knob to scroll to and highlight the option. Press the TUNE knob to configure the option.Enable Off Daily Once Weekends WeekdaysTime 12:00 AM - 11:59 PMWake to SIRIUS BuzzerPreset Last listened (last channel tuned) Any favorite channel (1 - 10)Volume 1 - 206. Turn the TUNE knob to scroll to and highlight a setting for each option. Press the TUNE knob to select the setting. Continue until you have configured all the options for the alarm.7. When you are done, press MENU. The alarm settings will be saved.AlarmSavedEnable: DailyTime: 6:30AMWake to: SIRIUSPreset: Last ListenedVolume: 5Alarm 1
42Using your SIRIUS TTR1 RadioSnoozeWhen the alarm sounds, pressing the Snooze button will silence the alarm for a period of time. After the snooze time elapses, the alarm will sound again.To snooze:1. Press the Snooze/Sleep button on the top of the radio. The radio will display a snooze time of 05 minutes.2. Each subsequent press of the Snooze/Sleep button increases the snooze time to 10, 15, 30, 45, or 60 minutes.3. For the snoozing alarm, a countdown timer is displayed showing how many minutes are remaining before the alarm sounds again. The alarm icon will also blink for the snoozing alarm.05 minutesSet snooze timeAM5:3021
43Sleep TimerThe sleep timer turns the radio off after a period of time as you fall asleep. The time can be set to turn the radio off after 5, 10, 15, 30, 45, or 60 minutes. To turn the sleep timer On:1. Press the Snooze/Sleep button on the top of the radio. The radio will display a sleep time of 05 minutes.2. Each subsequent press of the Snooze/Sleep button increases the sleep time to 10, 15, 30, 45, or 60 minutes.3. A countdown timer is displayed at the bottom of the screen showing how many minutes are remaining before the radio turns off.To turn the sleep timer Off:1. Repeatedly press the Snooze/Sleep button on the top of the radio until Off is displayed.05 minutesSet sleep timeEric Clapton & B.B. KingKey to the HighwayDeep TracksSIRIUS 0163:21PMSleep OFFSet sleep time
44Using your SIRIUS TTR1 RadioParental ControlYour SIRIUS TTR1 Radio has a parental control feature which will allow you to lock access to channels. A 4-digit code controls access to the locked channel or locked category.When you browse a category, the locked channel will have an L displayed to the right of the channel name.If you attempt to tune to a locked channel, either by using direct tune or through the category list, you’ll be prompted to enter your 4-digit code. When the correct code is entered, you’ll be able to tune to the channel. All locked channels become unlocked and will remain unlocked until you turn the radio Off, and back On.If the radio is turned off while listening to a locked channel, the next time you turn the radio on, you will be prompted to enter your lock code. If you cancel, and do not enter your lock code, the channel will display Parental locked.To change the parental lock code:The SIRIUS TTR1 Radio has a default lock code of 1111. The first time you change the lock code, you’ll need to enter this code during the procedure.1. Press MENU. You can also press and hold the TUNE knob to go directly to parental control (go to step 3).2. Turn the TUNE knob to scroll to and highlight Parental control. Press the TUNE knob.100-Howard 100 101-Howard 101102-SIRIUS XM Stars103-Blue Collar Radio104-Raw Dog ComedyL LLLock channelsParental lockedHoward 101SIRIUS 10111:14AM1
453. Turn the TUNE knob to highlight Change lock code. Press the TUNE knob.4. You will be prompted to enter the original lock code. If this is the first time you are changing the lock code, enter 1111, otherwise enter your existing lock code. Turn the TUNE knob to scroll through the list of numbers and highlight each a number. Press the TUNE knob to select the highlighted character and move to the next character. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob to erase the character. When you have selected all 4 digits of your code, turn the TUNE knob to highlight OK and press the TUNE knob.5. You will be prompted to enter the new code. Enter the new code you desire in the same way. When you have selected all 4 digits of your code, turn the TUNE knob to highlight OK and press the TUNE knob.6. You will be prompted to enter the new code again. Enter the new code again in the same way. When you have selected all 4 digits of your code, turn the TUNE knob to highlight OK and press the TUNE knob.7. If you have entered your new code correctly, New Code Saved will be displayed.Enter orginal codeBKSPOKCANCEL0123456789New code savedCategory Tune
46Using your SIRIUS TTR1 Radio8. Press MENU to exit.To turn Parental control Off:1. Press and hold the TUNE knob.2. Lock/Unlock will be highlighted. Press the TUNE knob.3. You will be prompted to enter your 4-digit lock code. Turn the TUNE knob to scroll through the list of numbers and highlight a number. Press the TUNE knob to select the highlighted number and move to the next number. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob to erase the character. When you have selected all 4 digits of your code, turn the TUNE knob to highlight OK and press the TUNE knob.4. If you have entered the correct code, the parental lock is turned off. If you entered an incorrect code, Parental lock code mismatch message will be displayed, and the channels will remain locked.Enter lock codeBKSPOKCANCEL0123456789Parental lock is offParental lock codemismatchCategory TuneSIRIUS
47To lock or unlock channels:1. Press and hold the TUNE knob.2. Turn the TUNE knob to scroll through the list and highlight Lock channels. Press the TUNE knob.3. If parental control is On (locked), you will be prompted to enter your 4-digit code, otherwise skip to step 4. Turn the TUNE knob to scroll through the list of numbers and highlight a number. Press the TUNE knob to select the highlighted number and move to the next number. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob to erase the character. When you have selected all 4 digits of your code, turn the TUNE knob to highlight OK and press the TUNE knob.4. When you have successfully unlocked parental control, a list of all the channels will be displayed. Turn the TUNE knob to scroll through the list and highlight a channel that you wish to lock. Press the TUNE knob to lock the channel. An L will be displayed to the right of the channel name indicating that the channel is locked.Enter lock codeBKSPOKCANCEL0123456789100-Howard 100 101-Howard 101102-SIRIUS XM Stars103-Blue Collar Radio104-Raw Dog ComedyL LLLock channels
48 To unlock a channel, highlight a locked channel and press the TUNE knob. The L lock indicator will be removed indicating that the channel is unlocked.5. Continue to lock or unlock channels until you are done. When complete, press MENU. You will be prompted to save the parental lock list. Turn the TUNE knob to highlight YES and press the TUNE knob.6. A confirmation screen will be displayed. Press MENU to exit.To listen to a locked channel:When you tune to a locked channel, the channel will display Parental locked and no audio will play until you have unlocked the channel.1. Select the locked channel which will display Parental locked.2. Press the TUNE knob.3. Turn the TUNE knob to scroll through the list of numbers and highlight a number. Press the TUNE knob to select the highlighted number and move to the next number. If you make a mistake, turn the YES No*Parental lockSave parentallock list?Locked channelssavedCategory TuneEnter lock codeBKSPOKCANCEL0123456789Using your SIRIUS TTR1 Radio
49TUNE knob to highlight BKSP and press the TUNE knob to erase the character. When you have selected all 4 digits of your code, turn the TUNE knob to highlight OK and press the TUNE knob.4. If you have entered the correct lock code, the channel will begin playing.Once you have unlocked one channel, all locked channels become unlocked and will remain unlocked until you turn the radio Off. The next time you turn the radio On, all channels will be locked.Parental lock is offCategory Tune
50Using your SIRIUS TTR1 RadioEqualization (EQ)You can adjust the equalization profile of the radio to adjust for room acoustics and your listening pleasure. The profiles for equalization are Flat, Loudness, Bass Boost, Bright, and Vocal Boost.Another adjustment option is spatialization. Spatialization makes the radio sound like it is in a three-dimensional environment. By default, spatialization is on, but can be turned off.To change the equalization profile:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight EQ. Press the TUNE knob.3. Press the TUNE knob to select EQ Profiles.4. The currently selected profile will be denoted with an asterisk. Turn the TUNE knob to scroll to and highlight the equalization profile desired, and press the TUNE knob. The radio will change to the new equalization profile.5. Press MENU to exit.EQ ProfilesSpatialization>EQFlatLoudnessBass BoostBrightVocal Boost*EQ
51To turn spatialization on or off:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight Spatialization. Press the TUNE knob.3. Turn the TUNE knob to highlight ON or OFF and press the TUNE knob.4. Press MENU to exit.OFFSpatializationSpatializationON*
52
53Configuring your SIRIUS TTR1 Radio
54SIRIUS setupThe SIRIUS setup menu option allows you to configure your user name and password for the Sirius Internet Radio service. You can also check the status of your connection.If are not yet subscribed to the Sirius Internet Radio service, go to www.sirius.com/siriusinternetradio or call 888-539-7474 to subscribe, and get your user name and password. To test whether you are subscribed to service, go to www.sirius.com, click on the LISTEN ONLINE link, and then click the LAUNCH PLAYER link. Enter your username and password. Select a channel to listen to and then click on the PREMIUM link. If you can listen in the Premium mode, then you are subscribed to the SIRIUS Internet Radio service.User name and PasswordThis option allows you to enter your user name and password for the Sirius Internet Radio service.To enter your user name:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight SIRIUS setup. Press the TUNE knob.User namePasswordStatusSIRIUS setupConfiguring your SIRIUS TTR1 Radio
553. User name will be highlighted. Press the TUNE knob.4. Turn the TUNE knob to scroll through the list of characters and highlight each character for your user name. Press the TUNE knob to select the highlighted character and move to the next character. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob erase the character.5. When you have entered your user name, turn the TUNE knob to scroll to highlight OK and press the TUNE knob.6. You’ll now be prompted to enter your password. Continue with the step 4 in next section, and enter your password.To enter your password:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight SIRIUS setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Password. Press the TUNE knob.4. Turn the TUNE knob to scroll through the list of characters and highlight each character for your password. PasswordBKSPOKCANCEL0123456789 abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWSIRIUS setupThe SIRIUS setup menu option allows you to configure your user name and password for the Sirius Internet Radio service. You can also check the status of your connection.If are not yet subscribed to the Sirius Internet Radio service, go to www.sirius.com/siriusinternetradio or call 888-539-7474 to subscribe, and get your user name and password. To test whether you are subscribed to service, go to www.sirius.com, click on the LISTEN ONLINE link, and then click the LAUNCH PLAYER link. Enter your username and password. Select a channel to listen to and then click on the PREMIUM link. If you can listen in the Premium mode, then you are subscribed to the SIRIUS Internet Radio service.User name and PasswordThis option allows you to enter your user name and password for the Sirius Internet Radio service.To enter your user name:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight SIRIUS setup. Press the TUNE knob.User nameBKSPOKCANCEL0123456789 abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVW
56Press the TUNE knob to select the highlighted character and move to the next character. If you make a mistake, turn the TUNE knob to highlight BKSP and press the TUNE knob erase the character.5. When you have entered your user name, turn the TUNE knob to scroll to highlight OK and press the TUNE knob.6. The Saved screen will be displayed. If you have correctly entered the information, the radio will display the Connecting... and then the Loading... screens. If your user name or password is incorrect, the Login failed screen will be displayed. Login failedGo to SIRIUS setupSIRIUSBuffering.../SIRIUS Hits 1SIRIUS 0013:14PMConfiguring your SIRIUS TTR1 Radio
57Configuring your SIRIUS TTR1 RadioStatusThe Status screen shows the current status of your Sirius Internet Radio service, the user name you are using, and the bit rate of your connection.To display the status:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight SIRIUS setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Status. Press the TUNE knob.4. The Status screen will be displayed. Press MENU to exit.ActiveUser name:your_user_nameBit rate:HIGHStatus
58System SetupThe System Setup menu option offers the following menu items:SIRIUS page 59AUX in page 59Alarms page 60 Alarm 1: page 60 Alarm 2: page 60Brightness page 60Clock Setup page 61 Set Time/Date page 61 Auto Update page 62 Time Zone page 62 Daylight savings page 63Network page 64 Network wizard page 64 View Settings page 65 Manual Settings page 66 Network profile page 66Factory reset page 68Software update page 69 Auto-check setting page 69 Check now page 70Info page 72Refer to the sections following for each menu option.SIRIUSAUX inAlarmsBrightnessClock Setup >System SetupConfiguring your SIRIUS TTR1 Radio
59SIRIUS and AUX inThese two menu options select what the radio will play— SIRIUS selects the Sirius Internet Radio service to be played, and AUX in selects the auxiliary input to be played. You can connect a CD or MP3 player to the AUX In connector, and listen to it.To select auxiliary in to be played:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight AUX in. Press the TUNE knob.4. The Auxiliary input screen will be displayed, and the radio will play the input from the AUX In connector.To switch from AUX in to SIRIUS:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. SIRIUS will be highlighted. Press the TUNE knob.4. The radio will switch back to SIRIUS and connect to the Sirius Internet Radio service. Audio InAuxiliary input7:14PMEQSystem Setup >AUX inConfiguring your SIRIUS TTR1 Radio
60AlarmsRefer to “Alarm Clock” on page 40 for information about the alarm clocks. Refer to “Snooze” on page 42 for more information about the snooze function.BrightnessBrightness has four settings to set the brightness of the display screen, Automatic, High, Medium, and Low. The Automatic setting adjusts the brightness of the display screen according to the background light in the room, automatically dimming the display screen the darker the room.To change the display screen brightness:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Brightness. Press the TUNE knob.4. Turn the TUNE knob to display your desired setting, Automatic, High, Medium, or Low. Press the TUNE knob to select your setting.5. Press MENU to exit.AutomaticBrightnessConfiguring your SIRIUS TTR1 Radio
61Configuring your SIRIUS TTR1 RadioClock SetupClock Setup allows you to change the clock settings:• Set Time/Date - Change the time and/or date.• Auto Update - Synchronize the clock via the Internet Yes or No.• Time Zone - Select the time zone you are in.• Daylight savings - Turn daylight savings time On or Off.To set the time and date:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Clock Setup. Press the TUNE knob.4. Set Time/Date will be highlighted. Press the TUNE knob.5. Turn the TUNE knob to select the desired hour, and press the TUNE knob to advance to the next field. Continue doing this until you have finished.Set Time/DateAuto UpdateTime ZoneDaylight savings>Clock Setup07-20-200911:39 AMSet Time/Date
62To set Auto Update:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Clock Setup. Press the TUNE knob.4. Turn the TUNE knob to scroll to and highlight Auto Update. Press the TUNE knob.5. Turn the TUNE knob to select either YES or NO, and press the TUNE knob.6. Press MENU to exit.To set your time zone:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Clock Setup. Press the TUNE knob.4. Turn the TUNE knob to scroll to and highlight Time Zone. Press the TUNE knob.YES* NOAuto UpdateSync. TimeVia Internet?Configuring your SIRIUS TTR1 Radio
63Configuring your SIRIUS TTR1 Radio5. Turn the TUNE knob to scroll to and highlight the time zone you are in. Press the TUNE knob.6. Press MENU to exit.To set daylight savings time:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Clock Setup. Press the TUNE knob.4. Turn the TUNE knob to scroll to and highlight Daylight savings. Press the TUNE knob.5. Turn the TUNE knob to select either ON or OFF, and press the TUNE knob.6. Press MENU to exit.EasternCentralMountainPacificAlaska>Time ZoneON OFF*Daylight savingsDaylight savings
64NetworkNetwork allows you to view and change the network settings:• Network wizard - Helps you to easily connect to a network• View settings - Displays information about your network connection• Manual Settings - Allows you to manually setup your connection to a network• Network profile - Displays the wireless network connections saved in the radioEach Network menu option is discussed in the sections which follow.Network Wizard:IMPORTANT! To connect to a wireless network which restricts access by MAC address, the MAC address of the SIRIUS TTR1 Radio must be added to the allowed list of MAC addresses in the access point before connecting. You can find the MAC address of your radio by pressing MENU, then turning and pressing the TUNE knob to highlight and select: System Setup Network View settings. The MAC address of the SIRIUS TTR1 Radio will be displayed.Refer to one the following sections for detailed instructions on using the Network Wizard to connect to a network:Network wizardView settingsManual SettingsNetwork profile >Network settingsConfiguring your SIRIUS TTR1 Radio
65Configuring your SIRIUS TTR1 Radio• For connecting to a wireless network, refer to “To connect to a wireless network using the Network Wizard:” on page 17.• For connecting to a wired network, refer to “To connect to a wired network using the Network Wizard:” on page 20.View settings:View Settings displays information about your network connection, including the type of connection, the status, the radio’s MAC address, and other network connection details such as IP addresses.To view the network settings:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Network. Press the TUNE knob.4. Turn the TUNE knob to scroll to and highlight View settings. Press the TUNE knob.5. Turn the TUNE knob to scroll through the network settings.6. Press MENU to exit.Active connection:WLAN is activeMAC address:00:00:00:00:00:00Wlan region:View settings
66Manual Settings:Refer to one the following sections for detailed instructions on using the Manual Settings to connect to a network:• For connecting to a wireless network, refer to “To connect to a wireless network using the Manual Settings:” on page 22.• For connecting to a wired network, refer to “To connect to a wired network using the Manual Settings:” on page 27.Network profile:Network profile displays the wireless network connections which are stored in the radio when you connect to a wireless network. You can delete the profiles if desired.To view and delete the network profiles:Note that you cannot delete the active wireless network profile.1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Network. Press the TUNE Your_Network_NameSome_Other_Network*Network profileConfiguring your SIRIUS TTR1 Radio
67knob.4. Turn the TUNE knob to scroll to and highlight Network profile. Press the TUNE knob.5. The saved wireless network names will be displayed. If you wish to delete a profile, turn the TUNE knob to scroll to and highlight a profile name. Press the TUNE knob.6. Confirm that you really want to delete the profile. Turn the TUNE knob to highlight YES or NO and press the TUNE knob.7. Press MENU to exit.YES NO*Confirm deleteConfirm deleteConfiguring your SIRIUS TTR1 Radio
68Factory resetFactory reset restores the SIRIUS TTR1 Radio to the factory settings. It will erase all the stored network settings, account user name and password, favorite channels, alarm clock settings, lock code, and set all other options back to the factory settings.To restore the radio to the factory settings:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Factory reset. Press the TUNE knob.4. Confirm that you really want to proceed with the factory reset. Turn the TUNE knob to highlight YES or NO and press the TUNE knob.5. The screen will display Restarting and the radio turn off.YES NO*Factory resetProceed?Configuring your SIRIUS TTR1 Radio
69Software updateSoftware update allows you to set the radio to automatically check for any available software updates, and also to manually force the radio to check if an update is available. SIRIUS occasionally updates the software for their radios.By default, the SIRIUS TTR1 Radio is set to automatically check for updates. If it finds a software update, you’ll be prompted that a new software is available. You can change this setting so the radio will not automatically check for updates.To change automatic software updates:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Software Update. Press the TUNE knob.4. Turn the TUNE knob to scroll to and highlight Auto-check setting. Press the TUNE knob.5. Select whether you periodically want the radio to check for software updates. Turn the TUNE knob to Auto-check settingCheck nowSoftware updateYES* NOSoftware updateCheck periodically fornew versions?Configuring your SIRIUS TTR1 Radio
70highlight YES or NO and press the TUNE knob.6. Press MENU to exit.To force the radio to check for a software update:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Software Update. Press the TUNE knob.4. Turn the TUNE knob to scroll to and highlight Check now. Press the TUNE knob.5. The radio will check for a software update. If an update is available, the radio will download and install the update. If no update is available, Software up to date will be displayed. If a software update is available, Software update is displayed.6. Press MENU to exit.Software updateChecking fornew versions.../Software up to dateSoftware updateConfiguring your SIRIUS TTR1 Radio
71Configuring your SIRIUS TTR1 RadioUpdating the software:If you manually force the radio to check for a software update, or the radio automatically finds a software update, and you want to update the software, follow these steps.1. The Software update screen is displayed. Turn the TUNE knob to highlight YES and press the TUNE knob.2. The radio will download the software update. Allow the download to finish.3. When the download is complete, you will be prompted to proceed with the installation of the software. The default answer is YES. Press the TUNE knob to proceed.4. You will be warned not to power off the radio, and the radio will be updated with the new software.Software updateNew version available. Update Software?YES NO*Software update1.5.6.21635-1A17Downloading/YES* NO*Software updateProceed?Software update1.5.6.21635-1A17Updating.../
725. When the update is complete, you’ll be prompted to Press ‘SELECT’ to start. Press the TUNE knob.6. The radio will start with the new software.InfoInfo displays the software version number, and the Radio ID number.To display the information:1. Press MENU.2. Turn the TUNE knob to scroll to and highlight System Setup. Press the TUNE knob.3. Turn the TUNE knob to scroll to and highlight Info. Press the TUNE knob.4. The software version number, and the Radio ID number will be displayed.5. Press MENU to exit.Software update Update CompletedPress ‘SELECT’ to startSW version:v1.5.6.21635-1A13Radio ID:0013E09BD52FB6:1EInfoConfiguring your SIRIUS TTR1 Radio
73TroubleshootingConfiguring your SIRIUS TTR1 Radio
74Your SIRIUS TTR1 Radio has been designed and built to be trouble-free but if you experience a problem, here’s some troubleshooting hints.You can also call SIRIUS Customer Care at XXX-XXXX-XXXX.If you see this on the screen: Try this:Connecting •The radio is attempting to connect to the Sirius Internet Radio service. If this message is displayed more than one minute, make sure your network is connected to the Internet. To verify that you have an Internet connection, refer to “To force the radio to check for a software update:” on page 70 and follow the procedure. If you get the message Software up to date, or New version available, then the radio is connected to the Internet. If you get the message, Login failed, then you don’t have an Internet connection. Check with your network administrator for Internet connectivity on your network.•Turn your radio Off and On again.Loading •The radio is loading the channel information. If this message is displayed for more than one minute, make sure your connection to the Internet has not been interrupted. See Connecting (previous troubleshooting item) for verifying your Internet connection.•Turn your radio Off and On again.Updating •Your radio is installing a software update. Do not turn the radio off. Allow the software update complete.Troubleshooting
75TroubleshootingIf you see this on the screen: Try this:Waiting for Ethernet •The radio is expecting a wired Ethernet connection. Plug an Ethernet wire into your home network, then plug the other end into the Ethernet connection inside the compartment at the rear of the radio.•Change to a wireless network connection if a wired Ethernet connection is not available.Login failed •Your SIRIUS user name and/or password is incorrect, you don’t have a subscription to the Sirius Internet Radio service, or your subscription is no longer valid. To verify that you are subscribed to service, go to www.sirius.com, click on the LISTEN ONLINE link, and then click the LAUNCH PLAYER link. Enter your username and password. Select a channel to listen to and then click on the PREMIUM link. If you can listen in the Premium mode, then you are subscribed to the SIRIUS Internet Radio service.Failed to connect •The network information you entered is incorrect. Verify and re-enter the information.•You have entered an incorrect password for a secure wireless network. Verify and re-enter the information.•If you have manually configured a network connection, you have entered one or more incorrect settings. Verify and re-enter the information.
76If you see this on the screen: Try this:Stream Closed •Your account username and password has been used at another location to connect to the Sirius Internet Radio service, and your radio has been disconnected from the service. Turn your radio Off and On again.If this happens: Try this:You do not receive all the SIRIUS channels to which you subscribed•The Sirius Internet Radio service does not have not of the same channels as the SIRIUS satellite service. Check www.sirius.com/siriusinternetradio and click the view channel lineup link for the latest channel lineup.The Network Wizard does not find your wireless network•Your wireless network has a hidden name (SSID). If so, you will have to manually configure your network connection, or used a wired network connection.•The wireless signal from your access point is too low. Try moving the radio closer to your access point and see if the Network Wizard finds your wireless network. The Network Wizard fails before the radio connects to your network•Your network has DHCP disabled. You’ll have to manually configure your network connection. Troubleshooting
77Product SpecificationsTroubleshooting
78Product SpecificationsDimensions SIRIUS TTR1 Radio 283 mm (W) x 185 mm (H) x 95 mm (D) 11 in (W) X 7.25 in (H) X 3.75 in (D) Remote 52 mm (W) x 85 mm (H) x 5 mm (D) 2 in (W) x 3.3 in (H) x .25 in (D)Weight SIRIUS TTR1 Radio 2.85 kg (6.3 lbs)Audio Outputs Headphone 3.5 mm diameter mini stereo jack Line Out 3.5 mm diameter mini stereo jackAudio Input Aux In 3.5 mm diameter mini stereo jack
79Patent and Environmental InformationPatent Information It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/or make available any technology incorporated in this product. Furthermore, the AMBEª voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The software is licensed solely for use within this product. The music, talk, news, entertainment, data, and other content on the Services are protected by copyright and other intellectual property laws and all ownership rights remain with the respective content and data service providers. You are prohibited from any export of the content and/or data (or derivative thereof ) except in compliance with applicable export laws, rules and regulations. The user of this or any other software contained in a SIRIUS | XM radio is explicitly prohibited from attempting to copy, decompile, reverse engineer, hack, manipulate or disassemble the object code, or in any other way convert the object code into human-readable form.Environmental Information Follow local guidelines for waste disposal when discarding packaging and electronic appliances.Your radio is packaged with cardboard, polyethylene, etc., and does not contain any unnecessary materials.
81©2009 SIRIUS XM Radio Inc. “SIRIUS”, “XM” and all related marks and logos are trademarks of SIRIUS XM Radio Inc. and its subsidiaries. “BBC” and “Radio One” are trademarks of the British Broadcasting Corporation and are used under license. BBC logo © BBC 1996. Radio 1 logo © BBC 2001. Cosmopolitanª is a registered trademark of Hearst Communications, Inc. Elvis Radio logo © EPE Reg. U.S. Pat & TM off. IndyCar (and Design) are registered trademarks of Brickyard Trademarks, Inc., used with permission. Major League Baseball trademarks and copyrights are used with permission of Major League Baseball Properties, Inc. Visit the official website at MLB.com. Games subject to availability and change and may not include all spring training games. All rights reserved. NASCARª is a registered trademark of the National Association for Stock Car Auto Racing, Inc. The NBA identifications are the intellectual property of NBA Properties, Inc. and the respective NBA member teams. © 2009 NBA Properties, Inc. © 2009 NFL Properties LLC. All NFL-related trademarks are trademarks of the National Football League. NHL and the NHL Shield are registered trademarks of the National Hockey League. © NHL 2009. All NHL logos and marks and NHL team logos and marks depicted herein are the property of the NHL and the respective teams and may not be reproduced without the prior written consent of NHL Enterprises, L.P. The Home Ice® channel is a registered trademark of XM Satellite Radio Inc. The Swinger Golfer logo is a registered trademark of PGA TOUR, Inc. Visit xmradio.com/xmlineup for updates. All programming/channel lineup/XM service subject to change or preemption. All other marks and logos are the property of their respective owners. All rights reserved. Hardware, subscription and activation fee required. Other fees and taxes may apply. Month-to-month subscriptions must be activated via telephone. Hardware and subscription sold separately. Subscription governed by XM Customer Agreement, which can be found at xmradio.com/serviceterms. Prices and programming are subject to change. SIRIUS Radio U.S. service only available in the 48 contiguous United States and the District of Columbia. Copyrights and Trademarks
82Owner’s Record The model number is located below and the Radio ID is located on the label on the SIRIUS TTR1 RadioRecord the Radio ID in the space provided below. Refer to these numbers whenever you call your dealer regarding this product.Model Number: TTR1Radio ID:___________________________Owners Record
sirius.comSIRIUS XM Radio Inc.1221 Avenue of the AmericasNew York, NY 100201.866.746.6796© 2009 SIRIUS XM Radio Inc.SIRIUS TTR1 Radio 080409a

Navigation menu