Zyxel Communications Network Router Zld Users Manual Book

2015-01-23

• ZyWALL (ZLD) Series
  • Table of Contents
• Introduction
  • Command Line Interface
    • 1.1 Overview
      • 1.1.1 The Configuration File
    • 1.2 Accessing the CLI
      • 1.2.1 Console Port
      • 1.2.2 Web Configurator Console
      • 1.2.3 Telnet
      • 1.2.4 SSH (Secure SHell)
    • 1.3 How to Find Commands in this Guide
    • 1.4 How Commands Are Explained
      • 1.4.1 Background Information (Optional)
      • 1.4.2 Command Input Values (Optional)
      • 1.4.3 Command Summary
      • 1.4.4 Command Examples (Optional)
      • 1.4.5 Command Syntax
      • 1.4.6 Changing the Password
    • 1.5 CLI Modes
    • 1.6 Shortcuts and Help
      • 1.6.1 List of Available Commands
      • 1.6.2 List of Sub-commands or Required User Input
      • 1.6.3 Entering Partial Commands
      • 1.6.4 Entering a ? in a Command
      • 1.6.5 Command History
      • 1.6.6 Navigation
      • 1.6.7 Erase Current Command
      • 1.6.8 The no Commands
    • 1.7 Input Values
    • 1.8 Ethernet Interfaces
    • 1.9 Saving Configuration Changes
    • 1.10 Logging Out
  • User and Privilege Modes
    • 2.1 User And Privilege Modes
      • 2.1.1 Debug Commands
• Reference
  • Object Reference
    • 3.1 Object Reference Commands
      • 3.1.1 Object Reference Command Example
  • Status
  • Registration
    • 5.1 myZyXEL.com Overview
      • 5.1.1 Subscription Services Available on the ZyWALL
    • 5.2 Registration Commands
      • 5.2.1 Command Examples
    • 5.3 Country Code
  • Interfaces
    • 6.1 Interface Overview
      • 6.1.1 Types of Interfaces
      • 6.1.2 Relationships Between Interfaces
    • 6.2 Interface General Commands Summary
      • 6.2.1 Basic Interface Properties and IP Address Commands
      • 6.2.2 DHCP Setting Commands
      • 6.2.3 Interface Parameter Command Examples
      • 6.2.4 RIP Commands
      • 6.2.5 OSPF Commands
      • 6.2.6 Connectivity Check (Ping-check) Commands
    • 6.3 Ethernet Interface Specific Commands
      • 6.3.1 MAC Address Setting Commands
      • 6.3.2 Port Grouping Commands
    • 6.4 Virtual Interface Specific Commands
      • 6.4.1 Virtual Interface Command Examples
    • 6.5 PPPoE/PPTP Specific Commands
      • 6.5.1 PPPoE/PPTP Interface Command Examples
    • 6.6 Cellular Interface Specific Commands
      • 6.6.1 Cellular Status
      • 6.6.2 Cellular Interface Command Examples
    • 6.7 Tunnel Interface Specific Commands
      • 6.7.1 Tunnel Interface Command Examples
    • 6.8 USB Storage Specific Commands
      • 6.8.1 USB Storage General Commands Example
    • 6.9 WLAN Specific Commands
      • 6.9.1 WLAN General Commands
      • 6.9.2 WLAN Interface Commands
      • 6.9.3 WLAN MAC Filter Commands
    • 6.10 VLAN Interface Specific Commands
      • 6.10.1 VLAN Interface Command Examples
    • 6.11 Bridge Specific Commands
      • 6.11.1 Bridge Interface Command Examples
    • 6.12 Auxiliary Interface Specific Commands
      • 6.12.1 Auxiliary Interface Command Examples
  • Trunks
    • 7.1 Trunks Overview
    • 7.2 Trunk Scenario Examples
    • 7.3 Trunk Commands Input Values
    • 7.4 Trunk Commands Summary
    • 7.5 Trunk Command Examples
    • 7.6 Link Sticking
    • 7.7 Link Sticking Commands Summary
    • 7.8 Link Sticking Command Example
  • Route
    • 8.1 Policy Route
    • 8.2 Policy Route Commands
      • 8.2.1 Assured Forwarding (AF) PHB for DiffServ
      • 8.2.2 Policy Route Command Example
    • 8.3 IP Static Route
    • 8.4 Static Route Commands
      • 8.4.1 Static Route Commands Examples
  • Routing Protocol
    • 9.1 Routing Protocol Overview
    • 9.2 Routing Protocol Commands Summary
      • 9.2.1 RIP Commands
      • 9.2.2 General OSPF Commands
      • 9.2.3 OSPF Area Commands
      • 9.2.4 Virtual Link Commands
      • 9.2.5 Learned Routing Information Commands
      • 9.2.6 show ip route Command Example
  • Zones
    • 10.1 Zones Overview
    • 10.2 Zone Commands Summary
      • 10.2.1 Zone Command Examples
  • DDNS
    • 11.1 DDNS Overview
    • 11.2 DDNS Commands Summary
  • Virtual Servers
    • 12.1 Virtual Server Overview
      • 12.1.1 1:1 NAT and Many 1:1 NAT
    • 12.2 Virtual Server Commands Summary
      • 12.2.1 Virtual Server Command Examples
      • 12.2.2 Tutorial - How to Allow Public Access to a Server
  • HTTP Redirect
    • 13.1 HTTP Redirect Overview
      • 13.1.1 Web Proxy Server
    • 13.2 HTTP Redirect Commands
      • 13.2.1 HTTP Redirect Command Examples
  • ALG
    • 14.1 ALG Introduction
    • 14.2 ALG Commands
    • 14.3 ALG Commands Example
  • IP/MAC Binding
    • 15.1 IP/MAC Binding Overview
    • 15.2 IP/MAC Binding Commands
    • 15.3 IP/MAC Binding Commands Example
  • Firewall
    • 16.1 Firewall Overview
    • 16.2 Firewall Commands
      • 16.2.1 Firewall Sub-Commands
      • 16.2.2 Firewall Command Examples
    • 16.3 Session Limit Commands
  • IPSec VPN
    • 17.1 IPSec VPN Overview
    • 17.2 IPSec VPN Commands Summary
      • 17.2.1 IKE SA Commands
      • 17.2.2 IPSec SA Commands (except Manual Keys)
      • 17.2.3 IPSec SA Commands (for Manual Keys)
      • 17.2.4 VPN Concentrator Commands
      • 17.2.5 VPN Configuration Provisioning Commands
      • 17.2.6 SA Monitor Commands
  • SSL VPN
    • 18.1 SSL Access Policy
      • 18.1.1 SSL Application Objects
      • 18.1.2 SSL Access Policy Limitations
    • 18.2 SSL VPN Commands
      • 18.2.1 SSL VPN Commands
      • 18.2.2 Setting an SSL VPN Rule Tutorial
  • L2TP VPN
    • 19.1 L2TP VPN Overview
    • 19.2 IPSec Configuration
      • 19.2.1 Using the Default L2TP VPN Connection
    • 19.3 Policy Route
    • 19.4 L2TP VPN Commands
      • 19.4.1 L2TP VPN Commands
    • 19.5 L2TP VPN Example
      • 19.5.1 Configuring the Default L2TP VPN Gateway Example
      • 19.5.2 Configuring the Default L2TP VPN Connection Example
      • 19.5.3 Configuring the L2TP VPN Settings Example
      • 19.5.4 Configuring the Policy Route for L2TP Example
  • Application Patrol
    • 20.1 Application Patrol Overview
    • 20.2 Application Patrol Commands Summary
      • 20.2.1 Pre-defined Application Commands
      • 20.2.2 Rule Commands for Pre-defined Applications
      • 20.2.3 Exception Commands for Pre-defined Applications
      • 20.2.4 Other Application Commands
      • 20.2.5 Rule Commands for Other Applications
      • 20.2.6 General Commands for Application Patrol
  • Anti-Virus
    • 21.1 Anti-Virus Overview
    • 21.2 Anti-virus Commands
      • 21.2.1 General Anti-virus Commands
      • 21.2.2 Zone to Zone Anti-virus Rules
      • 21.2.3 White and Black Lists
      • 21.2.4 Signature Search Anti-virus Command
    • 21.3 Update Anti-virus Signatures
      • 21.3.1 Update Signature Examples
    • 21.4 Anti-virus Statistics
      • 21.4.1 Anti-virus Statistics Example
  • IDP Commands
    • 22.1 Overview
    • 22.2 General IDP Commands
      • 22.2.1 IDP Activation
    • 22.3 IDP Profile Commands
      • 22.3.1 Global Profile Commands
      • 22.3.2 IDP Zone to Zone Rules
      • 22.3.3 Editing/Creating IDP Signature Profiles
      • 22.3.4 Editing/Creating Anomaly Profiles
      • 22.3.5 Editing System Protect
      • 22.3.6 Signature Search
    • 22.4 IDP Custom Signatures
      • 22.4.1 Custom Signature Examples
    • 22.5 Update IDP Signatures
      • 22.5.1 Update Signature Examples
    • 22.6 IDP Statistics
      • 22.6.1 IDP Statistics Example
  • Content Filtering
    • 23.1 Content Filtering Overview
    • 23.2 Content Filtering Policies
    • 23.3 External Web Filtering Service
    • 23.4 Content Filtering Reports
    • 23.5 Content Filter Command Input Values
    • 23.6 General Content Filter Commands
    • 23.7 Content Filter Filtering Profile Commands
    • 23.8 Content Filter URL Cache Commands
    • 23.9 Content Filtering Statistics
      • 23.9.1 Content Filtering Statistics Example
    • 23.10 Content Filtering Commands Example
  • Anti-Spam
    • 24.1 Anti-Spam Overview
    • 24.2 Anti-Spam Commands
      • 24.2.1 General Anti-Spam Commands
      • 24.2.2 Zone to Zone Anti-spam Rules
      • 24.2.3 White and Black Lists
      • 24.2.4 DNSBL Anti-Spam Commands
    • 24.3 Anti-Spam Statistics
      • 24.3.1 Anti-Spam Statistics Example
  • Device HA
    • 25.1 Device HA Overview
      • 25.1.1 Before You Begin
    • 25.2 General Device HA Commands
    • 25.3 Active-Passive Mode Device HA
    • 25.4 Active-Passive Mode Device HA Commands
      • 25.4.1 Active-Passive Mode Device HA Commands
      • 25.4.2 Active-Passive Mode Device HA Command Example
    • 25.5 Legacy Mode (VRRP) Device HA
    • 25.6 Legacy Mode (VRRP) Device HA Commands
      • 25.6.1 VRRP Group Commands
      • 25.6.2 VRRP Synchronization Commands
      • 25.6.3 Link Monitoring Commands
  • User/Group
    • 26.1 User Account Overview
      • 26.1.1 User Types
    • 26.2 User/Group Commands Summary
      • 26.2.1 User Commands
      • 26.2.2 User Group Commands
      • 26.2.3 User Setting Commands
      • 26.2.4 Force User Authentication Commands
      • 26.2.5 Additional User Commands
  • Addresses
    • 27.1 Address Overview
    • 27.2 Address Commands Summary
      • 27.2.1 Address Object Commands
      • 27.2.2 Address Group Commands
  • Services
    • 28.1 Services Overview
    • 28.2 Services Commands Summary
      • 28.2.1 Service Object Commands
      • 28.2.2 Service Group Commands
  • Schedules
    • 29.1 Schedule Overview
    • 29.2 Schedule Commands Summary
      • 29.2.1 Schedule Command Examples
  • AAA Server
    • 30.1 AAA Server Overview
    • 30.2 Authentication Server Command Summary
      • 30.2.1 ad-server Commands
      • 30.2.2 ldap-server Commands
      • 30.2.3 radius-server Commands
      • 30.2.4 radius-server Command Example
      • 30.2.5 aaa group server ad Commands
      • 30.2.6 aaa group server ldap Commands
      • 30.2.7 aaa group server radius Commands
      • 30.2.8 aaa group server Command Example
  • Authentication Objects
    • 31.1 Authentication Objects Overview
    • 31.2 aaa authentication Commands
      • 31.2.1 aaa authentication Command Example
    • 31.3 test aaa Command
      • 31.3.1 Test a User Account Command Example
  • Certificates
    • 32.1 Certificates Overview
    • 32.2 Certificate Commands
    • 32.3 Certificates Commands Input Values
    • 32.4 Certificates Commands Summary
    • 32.5 Certificates Commands Examples
  • ISP Accounts
    • 33.1 ISP Accounts Overview
      • 33.1.1 PPPoE and PPTP Account Commands
      • 33.1.2 Cellular Account Commands
  • SSL Application
    • 34.1 SSL Application Overview
      • 34.1.1 SSL Application Object Commands
      • 34.1.2 SSL Application Command Examples
  • Endpoint Security
    • 35.1 Endpoint Security Overview
      • 35.1.1 Endpoint Security Commands Summary
      • 35.1.2 Endpoint Security Object Commands
      • 35.1.3 Endpoint Security Object Command Example
  • DHCPv6 Objects
    • 36.1 DHCPv6 Object Commands Summary
      • 36.1.1 DHCPv6 Object Commands
      • 36.1.2 DHCPv6 Object Command Examples
  • System
    • 37.1 System Overview
    • 37.2 Customizing the WWW Login Page
    • 37.3 Host Name Commands
    • 37.4 Time and Date
      • 37.4.1 Date/Time Commands
    • 37.5 Console Port Speed
    • 37.6 DNS Overview
      • 37.6.1 Domain Zone Forwarder
      • 37.6.2 DNS Commands
      • 37.6.3 DNS Command Example
  • System Remote Management
    • 38.1 Remote Management Overview
      • 38.1.1 Remote Management Limitations
      • 38.1.2 System Timeout
    • 38.2 Common System Command Input Values
    • 38.3 HTTP/HTTPS Commands
      • 38.3.1 HTTP/HTTPS Command Examples
    • 38.4 SSH
      • 38.4.1 SSH Implementation on the ZyWALL
      • 38.4.2 Requirements for Using SSH
      • 38.4.3 SSH Commands
      • 38.4.4 SSH Command Examples
    • 38.5 Telnet
    • 38.6 Telnet Commands
      • 38.6.1 Telnet Commands Examples
    • 38.7 Configuring FTP
      • 38.7.1 FTP Commands
      • 38.7.2 FTP Commands Examples
    • 38.8 SNMP
      • 38.8.1 Supported MIBs
      • 38.8.2 SNMP Traps
      • 38.8.3 SNMP Commands
      • 38.8.4 SNMP Commands Examples
    • 38.9 ICMP Filter
    • 38.10 Dial-in Management
      • 38.10.1 AT Command Strings
      • 38.10.2 DTR Signal
      • 38.10.3 Response Strings
      • 38.10.4 Dial-in Management Commands
    • 38.11 Vantage CNM
      • 38.11.1 Vantage CNM Commands
    • 38.12 Language Commands
    • 38.13 IPv6 Commands
  • File Manager
    • 39.1 File Directories
    • 39.2 Configuration Files and Shell Scripts Overview
      • 39.2.1 Comments in Configuration Files or Shell Scripts
      • 39.2.2 Errors in Configuration Files or Shell Scripts
      • 39.2.3 ZyWALL Configuration File Details
      • 39.2.4 Configuration File Flow at Restart
    • 39.3 File Manager Commands Input Values
    • 39.4 File Manager Commands Summary
    • 39.5 File Manager Command Examples
    • 39.6 FTP File Transfer
      • 39.6.1 Command Line FTP File Upload
      • 39.6.2 Command Line FTP Configuration File Upload Example
      • 39.6.3 Command Line FTP File Download
      • 39.6.4 Command Line FTP Configuration File Download Example
    • 39.7 ZyWALL File Usage at Startup
    • 39.8 Notification of a Damaged Recovery Image or Firmware
    • 39.9 Restoring the Recovery Image
    • 39.10 Restoring the Firmware
    • 39.11 Restoring the Default System Database
      • 39.11.1 Using the atkz -u Debug Command
  • Logs
    • 40.1 Log Commands Summary
      • 40.1.1 Log Entries Commands
      • 40.1.2 System Log Commands
      • 40.1.3 Debug Log Commands
      • 40.1.4 E-mail Profile Commands
      • 40.1.5 Console Port Logging Commands
  • Reports and Reboot
    • 41.1 Report Commands Summary
      • 41.1.1 Report Commands
      • 41.1.2 Report Command Examples
      • 41.1.3 Session Commands
      • 41.1.4 Packet Size Statistics Commands
    • 41.2 Email Daily Report Commands
      • 41.2.1 Email Daily Report Example
    • 41.3 Reboot
  • Session Timeout
  • Diagnostics
    • 43.1 Diagnostics
    • 43.2 Diagnosis Commands
    • 43.3 Diagnosis Commands Example
  • Packet Flow Explore
    • 44.1 Packet Flow Explore
    • 44.2 Packet Flow Explore Commands
    • 44.3 Packet Flow Explore Commands Example
  • Packet Flow Filter
    • 45.1 Packet Flow Filter
    • 45.2 Packet Flow Filter Commands
    • 45.3 Packet Flow Filter Commands Examples
  • Maintenance Tools
    • 46.1 Maintenance Command Examples
      • 46.1.1 Packet Capture Command Example
  • Watchdog Timer
    • 47.1 Hardware Watchdog Timer
    • 47.2 Software Watchdog Timer
    • 47.3 Application Watchdog
      • 47.3.1 Application Watchdog Commands Example
  • List of Commands (Alphabetical)