dormakaba Canada CONFIDANT-RFID RFID OPERATED DOOR LOCK USED TO CONTROL ACCESS TO SECURED AREAS User Manual USERS MANUAL

Kaba Ilco Inc. RFID OPERATED DOOR LOCK USED TO CONTROL ACCESS TO SECURED AREAS USERS MANUAL

USERS MANUAL

INSTALLATION GUIDEConfidant RFID Kit 13rd party Rose Mount & Back PlatePK3616
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE2IMPORTANT: Wear Safety glasses before starting the replacement of parts.Confidant RFIDTM Installation Instructions (Kit 1)Installation Steps:1. Tools Needed ................................................................32. Check for Correct Inventory Kit .................................................4 3rd Party Rose Mount (Key Override) .................................................4 3rd Party Rose Mount (No Key Override) ...............................................5 3rd Party Back Plate Mount (Key Override) .............................................6 3rd Party Back Plate Mount (No Key Override) ..........................................73. Remove Battery Holder ........................................................84. Align Posts with Mortise .......................................................85. Spindle Selection & Installation ..................................................96. Install Outside Lever ..........................................................107. Install Lock on Door (Options) ..................................................11 Back Plate Mount (Key Override) ...................................................11 Rose Mount (Key Override) ........................................................11 Back Plate Mount (No Key Override) ................................................12 Rose Mount (No Key Override) .....................................................128. Plug Battery Holder ..........................................................139. Test Lock Functionality .......................................................1310. Program Lock - With Jack Cable ................................................1411. Install Battery Door ..........................................................14Model: Confidant RFIDIC: 4652A-CRFIDFCCID: Q8SCONFIDANT-RFIDRegulatory Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications of this product, not approved by manufacturer will void the user’s authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélec-trique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Made in Canada©2012 Kaba Lodging Systems. All trademarks and registered trademarks are the property of their respective owners.
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE31- ToolsA - Screw Driver Small FlatB - Screw Driver Phillips #2C - Screw Driver Torx T-20D - Hexagonal Key 3 mmE - 25mm / 19mm / 12mm / 10mm Drill BitA B C DE
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE43rd Party2- INVENTORY - 3rd Party Rose Mount (Key Override)Inventory Kit3rd Party
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE5PK36XX_07_12 • CONFIDENT INSTALLATION GUIDE52- INVENTORY - 3rd Party Rose Mount (No Key Override)3rd Party Inventory Kit3rd Party
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE62- INVENTORY - 3rd Party Back Plate Mount (Key Override)3rd Party Inventory Kit3rd Party
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE72- INVENTORY - 3rd Party Back Plate Mount (No Key Override)3rd Party Inventory Kit3rd Party
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE83- REMOVE BATTERY HOLDER4- ALIGN POSTS WITH MORTISEACBDUnscrewUnclip Battery HolderRemove DoorRemove Battery Holder
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE95- SPINDLE - Selection & Installation1- Choose Correct Spindle 2- Check Handing: Adjust for Right Hand (RH) or Left Hand (LH)3- Insert Spindle: Check groove is in line with the inside lever set screw position.RH LHA) Set Screw On Top B) Set Screw On Side1X 70mm1X 82mm
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE106- INSTALL OUTSIDE LEVERLeft HandRight Hand
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE117- INSTALL LOCK ON DOOR - Back Plate Mount (Key Override)7- INSTALL LOCK ON DOOR - Rose Mount (Key Override)OptionalOptionalOptionalOptional
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE127- INSTALLATION ON DOOR - Back Plate Mount (No Key Override)7- INSTALLATION ON DOOR - Rose Mount (No Key Override)
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE138- PLUG BATTERY HOLDER✗✓9- TEST LOCK FUNCTIONALITYA - Present Test Keycard B - Check Green & Red Lights Flash C - Rotate Outside Lever to Check Bolt Retraction D - Release Outside Lever, Should Move Freely E - Rotate Inside Lever to Check Bolt Retraction F - Check Bolt Projection from Thumbturn & Key
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE1411- INSTALL BATTERY DOORACBD10- PROGRAM LOCK - With Jack Cable
Printed in Canada PK3616-T_08_12Kaba Ilco Inc.7301 Boul. Décarie Montréal (QC) H4P 2G7Technical Support: 1.800.906.4526 Customer Service: T: 1.877.468.3555 F: 514.735.6589General Information: www.ilcolodging.comOnline Consumable Orders: www.keycard.comTo access all of our easy steps, please visit our Support Website: http://connect.kabalodging.com

Navigation menu