dormakaba Canada CONFIDANT-RFID RFID OPERATED DOOR LOCK USED TO CONTROL ACCESS TO SECURED AREAS User Manual USERS MANUAL
Kaba Ilco Inc. RFID OPERATED DOOR LOCK USED TO CONTROL ACCESS TO SECURED AREAS USERS MANUAL
USERS MANUAL
INSTALLATION GUIDE
Confidant RFID Kit 1
3rd party Rose Mount & Back Plate
PK3616
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
2
IMPORTANT: Wear Safety glasses before starting the replacement of parts.
Confidant RFIDTM Installation Instructions (Kit 1)
Installation Steps:
1. Tools Needed ................................................................3
2. Check for Correct Inventory Kit .................................................4
3rd Party Rose Mount (Key Override) .................................................4
3rd Party Rose Mount (No Key Override) ...............................................5
3rd Party Back Plate Mount (Key Override) .............................................6
3rd Party Back Plate Mount (No Key Override) ..........................................7
3. Remove Battery Holder ........................................................8
4. Align Posts with Mortise .......................................................8
5. Spindle Selection & Installation ..................................................9
6. Install Outside Lever ..........................................................10
7. Install Lock on Door (Options) ..................................................11
Back Plate Mount (Key Override) ...................................................11
Rose Mount (Key Override) ........................................................11
Back Plate Mount (No Key Override) ................................................12
Rose Mount (No Key Override) .....................................................12
8. Plug Battery Holder ..........................................................13
9. Test Lock Functionality .......................................................13
10. Program Lock - With Jack Cable ................................................14
11. Install Battery Door ..........................................................14
Model: Confidant RFID
IC: 4652A-CRFID
FCCID: Q8SCONFIDANT-RFID
Regulatory Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications of this product, not approved by manufacturer will void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélec-
trique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Made in Canada
©2012 Kaba Lodging Systems. All trademarks and registered trademarks are the property of their respective owners.
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
3
1- Tools
A - Screw Driver Small Flat
B - Screw Driver Phillips #2
C - Screw Driver Torx T-20
D - Hexagonal Key 3 mm
E - 25mm / 19mm / 12mm / 10mm Drill Bit
A B C D
E
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
4
3rd Party
2- INVENTORY - 3rd Party Rose Mount (Key Override)
Inventory Kit
3rd Party
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
5
PK36XX_07_12 • CONFIDENT INSTALLATION GUIDE
5
2- INVENTORY - 3rd Party Rose Mount (No Key Override)
3rd Party Inventory Kit
3rd Party
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
6
2- INVENTORY - 3rd Party Back Plate Mount (Key Override)
3rd Party Inventory Kit
3rd Party
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
7
2- INVENTORY - 3rd Party Back Plate Mount (No Key Override)
3rd Party Inventory Kit
3rd Party
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
8
3- REMOVE BATTERY HOLDER
4- ALIGN POSTS WITH MORTISE
A
C
B
D
Unscrew
Unclip Battery Holder
Remove Door
Remove Battery Holder
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
9
5- SPINDLE - Selection & Installation
1- Choose Correct Spindle 2- Check Handing: Adjust for Right Hand (RH) or Left Hand (LH)
3- Insert Spindle: Check groove is in line with the inside lever set screw position.
RH LH
A) Set Screw On Top B) Set Screw On Side
1X 70mm
1X 82mm
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
10
6- INSTALL OUTSIDE LEVER
Left Hand
Right Hand
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
11
7- INSTALL LOCK ON DOOR -
Back Plate Mount (Key Override)
7- INSTALL LOCK ON DOOR - Rose Mount (Key Override)
Optional
Optional
Optional
Optional
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
12
7- INSTALLATION ON DOOR -
Back Plate Mount (No Key Override)
7- INSTALLATION ON DOOR - Rose Mount (No Key Override)
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
13
8- PLUG BATTERY HOLDER
✗
✓
9- TEST LOCK FUNCTIONALITY
A - Present Test Keycard
B - Check Green & Red Lights Flash
C - Rotate Outside Lever to Check Bolt Retraction
D - Release Outside Lever, Should Move Freely
E - Rotate Inside Lever to Check Bolt Retraction
F - Check Bolt Projection from Thumbturn & Key
PK3616_08_12 • CONFIDANT INSTALLATION GUIDE
14
11- INSTALL BATTERY DOOR
A
C
B
D
10- PROGRAM LOCK - With Jack Cable
Printed in Canada PK3616-T_08_12
Kaba Ilco Inc.
7301 Boul. Décarie Montréal (QC) H4P 2G7
Technical Support:
1.800.906.4526
Customer Service:
T: 1.877.468.3555
F: 514.735.6589
General Information:
www.ilcolodging.com
Online Consumable Orders:
www.keycard.com
To access all of our easy steps, please visit our Support Website:
http://connect.kabalodging.com