dormakaba USA PG16 Wireless Access Management System Portal Gateway User Manual 12833A

Stanley Security Solutions, Inc. Wireless Access Management System Portal Gateway 12833A

manual

POWER INDICATORLINK INDICATORACTIVITY INDICATOR POWER ETHERNET USB SCREW MOUNTING LOCATIONS ANTENNAS PORTAL GATEWAY WARNING: THIS PRODUCT IS NOT WARRANTED FOR OUTDOOR USE! WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY OSI SECURITY DEVICES COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. SECURITY DEVICES OMNILOCK® ACCESS CONTROL SYSTEMS INSTALLATION INSTRUCTIONS FOR PORTAL GATEWAY PG-B SERIES a. Refer to the WAMS Installation Guide to determine the optimum location for mounting the Portal Gateway. b. Insure that a 120VAC power outlet and an Ethernet connection are available. c. Mount the Portal Gateway in the selected location using the mounting screws provided. 1. Wood Screw, pan head, #10- Recommended pilot hole 1/8 inch diameter. 2. Drywall Anchor- Recommended pilot hole 3/8 inch diameter. 3. Concrete Screw- Recommended pilot hole 5/32 inch diameter. d. Connect the furnished 12VDC Power Supply to the 120VAC outlet and connect the 12VDC connector to the Portal Gateway. Observe that the “Power” indicator is on. e. Connect the Ethernet to the Portal Gateway. Observe that the “Link” indicator is on. f. After approximately 30 seconds, observe that the “Activity” indicator is flashing. SECTION 1: CHECK OPERATIONVerify proper operation of the Portal Gateway as specified in the Wireless Access Management System (WAMS) Installation Guide. SECTION 2: INSTALL THE PORTAL GATEWAYMOUNTING SCREW
SECURITY DEVICES 1580 JAYKEN WAY CHULA VISTA, CALIFORNIA 91911(619) 628-1000 FAX (619) 628-1001(Website: WWW.OMNILOCK.COM) Copyright ©2003 OSI Security Devices Inc. All Rights Reserved. OMNILOCK is a Registered Trademark of OSI Security Devices Inc. 12833 Rev.A

Navigation menu