dormakaba USA PG16 Wireless Access Management System Portal Gateway User Manual 12833A

Stanley Security Solutions, Inc. Wireless Access Management System Portal Gateway 12833A

manual

Download: dormakaba USA PG16 Wireless Access Management System Portal Gateway User Manual 12833A
Mirror Download [FCC.gov]dormakaba USA PG16 Wireless Access Management System Portal Gateway User Manual 12833A
Document ID669069
Application ID7Sa3hX213MLI3teuM33MNA==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.3kB (116221 bits)
Date Submitted2006-06-15 00:00:00
Date Available2006-06-15 00:00:00
Creation Date2006-05-23 13:54:19
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2006-05-23 13:54:59
Document TitleMicrosoft Word - 12833A.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Danny

SECURITY OMNILOCK®
DEVICES
ACCESS CONTROL SYSTEMS
INSTALLATION INSTRUCTIONS
FOR PORTAL GATEWAY PG-B SERIES
WARNING: THIS PRODUCT IS NOT WARRANTED FOR OUTDOOR USE!
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED
BY OSI SECURITY DEVICES COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ANTENNAS
MOUNTING
SCREW
PORTAL GATEWAY
SCREW MOUNTING
LOCATIONS
ACTIVITY
INDICATOR
LINK
INDICATOR
POWER
INDICATOR
USB
ETHERNET
POWER
SECTION 1: CHECK OPERATION
Verify proper operation of the Portal Gateway as specified in the Wireless Access Management System (WAMS)
Installation Guide.
SECTION 2: INSTALL THE PORTAL GATEWAY
a. Refer to the WAMS Installation Guide to determine the optimum location for mounting the Portal Gateway.
b. Insure that a 120VAC power outlet and an Ethernet connection are available.
c. Mount the Portal Gateway in the selected location using the mounting screws provided.
1. Wood Screw, pan head, #10- Recommended pilot hole 1/8 inch diameter.
2. Drywall Anchor- Recommended pilot hole 3/8 inch diameter.
3. Concrete Screw- Recommended pilot hole 5/32 inch diameter.
d. Connect the furnished 12VDC Power Supply to the 120VAC outlet and connect the 12VDC connector to
the Portal Gateway. Observe that the “Power” indicator is on.
e. Connect the Ethernet to the Portal Gateway. Observe that the “Link” indicator is on.
f. After approximately 30 seconds, observe that the “Activity” indicator is flashing.
Copyright ©2003 OSI Security Devices Inc. All Rights Reserved.
OMNILOCK is a Registered Trademark of OSI Security Devices Inc.
SECURITY
DEVICES
12833 Rev.A
(Website: WWW.OMNILOCK.COM)
1580 JAYKEN WAY
CHULA VISTA, CALIFORNIA 91911
(619) 628-1000
FAX (619) 628-1001

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2006:05:23 13:54:59-07:00
Create Date                     : 2006:05:23 13:54:19-07:00
Metadata Date                   : 2006:05:23 13:54:59-07:00
Format                          : application/pdf
Title                           : Microsoft Word - 12833A.doc
Creator                         : Danny
Document ID                     : uuid:4b758f97-5494-4ef8-8321-b256dd304d53
Instance ID                     : uuid:5af194d1-94f7-494a-88cf-7301af663020
Page Count                      : 2
Author                          : Danny
EXIF Metadata provided by EXIF.tools
FCC ID Filing: T8H-PG16

Navigation menu