eInstruction MOBI 2.4 GHz module User Manual RF Hub Regulatory

Download:
Mirror Download [FCC.gov]
Document ID	1075541
Application ID	gqMrZsIzQM+nPCZEZMuEkw==
Document Description	User Manual RF Hub Regulatory
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.25kB (428179 bits)
Date Submitted	2009-03-03 00:00:00
Date Available	2009-03-03 00:00:00
Creation Date	2008-12-11 14:29:08
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2008-12-11 14:29:11
Document Title	User Manual RF Hub Regulatory
Document Creator	Adobe InDesign CS3 (5.0.2)

Declaration of Conformity
The “CE“ mark on these devices indicates compliance under the EMC
2004/108/EC Directive.
Declaration of conformity according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:		
Manufacturer’s Address:
declares, that these products
Product Names:		
Model Numbers:		
Product Options:		
conform to the following
EMC:
RoHS:
eInstruction Corp
308 N Carroll Blvd
Denton, TX 76201 U.S.A.
RFCOM, Workspace RF Hub, Interwrite® Mobi
B4, H4, IP500, IP501
All
product specifications:
EN55022:2006 Class B
EN55024:1998+A1;2001+A2:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 61000-4-2:1995+A1:1998+A2002
EN 61000-4-3:2002+A1:2002
EN 61000-4-4:1995+A1:2001+A2:2001
EN 61000-4-5:1994+A1:2001
EN 61000-4-6:1994+A1:2001
EN 61000-4-11:1994+A1:2001
EN 300-328 V1.7.1
EN 301 489-1
“-R” labelled products conform to DIRECTIVE 2002/95/EC.
These products are RoHS-compliant.
Supplementary Information
The products herewith comply with the requirements of the Low Voltage Directive 73/23/
EEC and the EMC Directive 89/336/EEC.
Scottsdale, Arizona, U.S.A.
Location
12-1-2008
Date		
Dana Doubrava
Engineering Mgr
Regulatory Statements
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
These devices may not cause harmful interference, and
These devices must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of
the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee the interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced Radio/TV technician for help.
These devices comply with Part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following
two conditions: (1) The device may not cause harmful interference, and (2) The device must accept any interference received,
including interference that may cause undesired operation.
The radiated output power is far below the FCC Radio Frequency exposure limits. Nevertheless, these devices should be used
in such a manner that the potential for human contact during normal operation is minimized. This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
Canada
Industry Canada Class A emission compliance
statement. This Class A digital apparatus complies
with Canadian ICES-003.
Avis de conformité á la réglementation d’Industrie
Canada. Cet appareil numérique de classe A est
conforme á la norme NMB-003 du Canada.
Safety Information
It is good practice to switch off your wireless devices before boarding an aircraft. Make
sure it cannot be switched on inadvertently. The operation of wireless devices in an aircraft is forbidden by many airlines to prevent interference with communications systems.
Applications that could result in use on aircraft should carry appropriate warnings.
European Union Emission Directive
These products are in conformity with the protection requirements of EU Council Directive 89/366/ECC on the approximation of the laws of the Member States relating
to electromagnetic compatibility.
These products have been tested and found to comply with the limits for Class B
Information Technology Equipment according to CISPR 22/European Standard
EN55022. The limits for Class B equipment were derived for typical industrial environments to provide reasonable protection against interference with licensed communication devices.
European Union WEEE Directive
The manufacture of this equipment required the extraction and use of natural
resources. It may contain hazardous substances that could impact health and the
environment.
•
•
•
•
In order to avoid the dissemination of the hazardous substances into the
environment and to diminish the pressure on our natural resources, we
encourage you to return this product to the appropriate take-back system
facility. These facilities reuse or recycle most of the materials in this equipment in
a responsible way.
The crossed-out wheeled bin symbol below invites you to use these take-back
systems.
If you need more information about the collection, reuse and recycling systems
in your area, please contact your local or regional waste authority.
Further information about the responsible end-of-life management of this and
other eInstruction products is available on our Web site at
www.einstruction.com.
European Contact:
Centre Education Europe
26/36 rue Alfred Nobel
93600 Aulnay Sous Bois
France
TEL: +33 1.58.31.10.60
FAX: +33 1.58.31.10.69
www.interwritelearning.fr
Limited Warranty for the WorkspaceTM RF Hub, RFCOM and Interwrite® Mobi
eInstruction warrants these products to be free from defects in material and workmanship under the following terms. Complete and return the enclosed warranty
registration card to ensure that your products are covered by this warranty.
Coverage
Parts and labor are warranted for one (1) year from the date of the first consumer purchase for the Workspace RF Hub, RFCOM, and/or Interwrite Mobi. This warranty
applies to the original consumer purchaser only.
Within the European Union, the warranty period is two (2) years. Contact your local dealer or distributor for additional warranty information.
Warranty is valid only if original consumer’s purchase or lease date is less than or equal to six months from the original eInstruction sale date.  This information will be
captured by the system serial number and confirmed by the reseller’s purchase order.
A nominal Warranty Handling Fee will be charged after the first 90 days of use and calculated from the date of original consumer purchase. This payment may be made
by Visa, MasterCard, or American Express. A copy of the sales receipt or invoice will be required for warranty verification.
Conditions
Except as specified below, this warranty covers all defects in material or workmanship in the products.  The following are not covered by the warranty:
1. Any product on which the serial number has been defaced, modified, or removed (if applicable).
2. Damage, deterioration, or malfunction resulting from:
a. Accident, misuse, abuse, neglect, fire, water, lightening, or other acts of nature, unauthorized product modification for any purpose, or failure to follow
instructions supplied with the product.
b. Repair, or attempted repair, by anyone not authorized by eInstruction.
c. Any damage in shipment of the product (claims must be presented to the carrier).
d. Any other cause which does not relate to a manufacturing defect.
3. Any product not sold or leased to a consumer within six months of eInstruction’s original sale date.
4. Consumable parts, e.g., batteries, dry-erase markers, eraser felt.
eInstruction will pay all labor and material expenses for covered items, but will not pay for the following:
1. Removal or installation charges.
2. Costs for initial technical adjustments (set up), including adjustments of user controls.
3. Certain shipping charges. (Payment of shipping charges is discussed in the next section of this warranty.)
4. Packaging costs.  (Customers should keep their boxes.)
Warranty Service Procedures
1.
2.
3.
4.
5.
To obtain service on your eInstruction product, contact the Technical Support Department to receive a Return Material Authorization Number (RMA#) and
shipping instructions by calling:
In United States: (480) 443-2214 (MST)
In Europe:
+33 1.58.31.10.60 (CET)
Ship the product to eInstruction with the RMA# marked clearly on the outside of the box. eInstruction reserves the right to refuse the shipment, if not properly
marked.
Although the consumer must pay any shipping charges to ship the product to eInstruction for warranty service, eInstruction will pay the return shipping charges
for ground shipment. Other shipping options are available at an additional fee.
Whenever warranty service is required, the original dated sales invoice (or a copy) must be presented as proof of warranty coverage, and should be included in
shipment of the product.  In addition, please include your name, address, telephone number, fax number, email address, and a description of the problem.
If eInstruction determines that the unit is not defective within the terms of the warranty, the consumer shall pay the cost of all freight charges, as well as any
repair charges.
Technical Support
Web-based Technical Support is available free of charge at: www.einstruction.com, where current driver releases, as well as comprehensive technical support,
troubleshooting, Technical Bulletins and FAQs can be found.
Telephone Technical Support is available free of charge to the original consumer for a period of 90 days from the date of purchase of the product. Please contact our
Technical Support Department:
In United States: (480) 443-2214 (MST)
In Europe:
+33 1.58.31.10.60 (CET)
You can also fax your request to:
In United States: (480) 948-5508 (MST)
In Europe:
+33 1.58.31.10.69 (CET)
Our toll-free number in the U.S. is:  800-856-0732 (MST)
Disclaimer of Unstated Warranties
The warranty printed above is the only warranty applicable to this purchase. ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. Assuming the warranty above stated is
otherwise applicable, it is expressly understood and agreed that eInstruction’s sole liability, whether in contract, tort, under any warranty, in negligence, or otherwise, shall
be for the repair or replacement of the defective parts, and under no circumstances shall eInstruction be liable for special, indirect, or consequential damages. The price
stated and paid for the equipment is a consideration in limiting eInstruction’s liability.
Notice
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you.  This warranty
gives you specific legal rights, and you may have other rights, which vary from state to state, or province to province.
To obtain service on your eInstruction product, call our Technical Support Department at (480) 443-2214 (MST), or fax us at
(480) 948-5508 (MST); in Europe call +33 1.58.31.10.60 (CET), or fax us at +33 1.58.31.10.69 (CET).
We can also be contacted through our Web site at www.einstruction.com (in US), at EUOffice@gtcocalcomp.com (in Germany), or at infos@calcomp.fr (in France).
Important! All products returned to eInstruction for service must have prior approval in the form of a Return Merchandise Authorization Number (RMA#), which can be
obtained by calling the Technical Support Department.
Corporate Headquarters
Western Office
308 N Carroll Blvd
Denton, TX 76201
8224 East Evans Road
Scottsdale, Arizona 85260
Tel:
Tel:
480.948.6540
Support:
480.443.2214
Fax:
480.948.5508
888.707.6819
Fax: 940.565.0959
European Headquarters
Centre Education Europe
26/36 rue Alfred Nobel
93600 Aulnay Sous Bois
France
TEL: +33 1.58.31.10.60
FAX: +33 1.58.31.10.69
www.interwritelearning.fr
www.einstruction.com/support
www.interwritelearning.com/support
Support: 480.443.2214
Copyright© 2008 eInstruction
Interwrite is a registered trademark and Workspace is a trademark of
eInstruction Corp.
All other products and company names are the trademarks or registered
trademarks of their respective owners.
The information contained in this document is subject to change without notice. eInstruction assumes
no responsibility for technical, or editorial errors, or omissions that may appear in this document, or
for the use of this material. Nor does eInstruction make any commitment to update the information
contained in this document. This document contains proprietary information which is protected by
copyright. All rights reserved. No part of this document can be photocopied or reproduced in any
form without the prior, written consent of eInstruction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c006 1.236519, Wed Jun 14 2006 08:31:24
Instance ID                     : uuid:1aaeec89-5d7f-4460-8ffa-a62a0e657ba0
Document ID                     : adobe:docid:indd:6fb2044f-9f9b-11dd-b710-e4711f4b5c2e
Rendition Class                 : proof:pdf
Derived From Instance ID        : 6fb2044e-9f9b-11dd-b710-e4711f4b5c2e
Derived From Document ID        : adobe:docid:indd:93b35506-9ed5-11dd-8a17-e84eaada4a58
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:5E95C140D19EDD11B72099DC140180BB, uuid:4A55D74C170CDD11A344820980608867, uuid:bc1073b6-0967-11dc-9494-ffd56190741e, uuid:4A55D74C170CDD11A344820980608867
Manifest Reference Document ID  : uuid:5D95C140D19EDD11B72099DC140180BB, uuid:4955D74C170CDD11A344820980608867, adobe:docid:photoshop:bc1073b4-0967-11dc-9494-ffd56190741e, uuid:4955D74C170CDD11A344820980608867
Create Date                     : 2008:12:11 14:29:08-07:00
Modify Date                     : 2008:12:11 14:29:11-07:00
Metadata Date                   : 2008:12:11 14:29:11-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0.2)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 12758 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 5
Creator                         : Adobe InDesign CS3 (5.0.2)

EXIF Metadata provided by EXIF.tools