eInstruction MOBI 2.4 GHz module User Manual RF Hub Regulatory

eInstruction Corporation 2.4 GHz module RF Hub Regulatory

Contents

User Manual RF Hub Regulatory

Declaration of ConformityThe “CE“ mark on these devices indicates compliance under the EMC 2004/108/EC Directive. Declaration of conformity according to ISO/IEC Guide 22 and EN 45014Manufacturer’s Name:    eInstruction CorpManufacturer’s Address:  308 N Carroll Blvd           Denton, TX 76201 U.S.A.declares, that these productsProduct Names:    RFCOM, Workspace RF Hub, Interwrite® Mobi Model Numbers:    B4, H4, IP500, IP501 Product Options:   Allconform to the following product specications:EMC:    EN55022:2006 Class B    EN55024:1998+A1;2001+A2:2003    EN 61000-3-2:2000    EN 61000-3-3:1995+A1:2001    EN 61000-4-2:1995+A1:1998+A2002    EN 61000-4-3:2002+A1:2002    EN 61000-4-4:1995+A1:2001+A2:2001    EN 61000-4-5:1994+A1:2001    EN 61000-4-6:1994+A1:2001    EN 61000-4-11:1994+A1:2001    EN 300-328 V1.7.1    EN 301 489-1  RoHS:    “-R” labelled products conform to DIRECTIVE 2002/95/EC.     These products are RoHS-compliant.Supplementary InformationThe products herewith comply with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC.Scottsdale, Arizona, U.S.A.         12-1-2008          Dana Doubrava Location                    Date              Engineering Mgr
Note:  This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee the interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.• ConsultthedealeroranexperiencedRadio/TVtechnicianforhelp.CanadaIndustry Canada Class A emission compliance statement. This Class A digital apparatus complies with Canadian ICES-003.Avis de conformité á la réglementation d’Industrie Canada. Cet appareil numérique de classe A est conforme á la norme NMB-003 du Canada.These devices comply with Part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) The device may not cause harmful interference, and (2) The device must accept any interference received, including interference that may cause undesired operation.TheradiatedoutputpowerisfarbelowtheFCCRadioFrequencyexposurelimits.Nevertheless,thesedevicesshouldbeusedin such a manner that the potential for human contact during normal operation is minimized. This equipment complies with FCCradiationexposurelimitssetforthforanuncontrolledenvironment.Endusersmustfollowthespecificoperatinginstruc-tionsforsatisfyingRFexposurecompliance.Thistransmittermustnotbeco-locatedoroperatedinconjunctionwithanyotherantenna or transmitter.Regulatory StatementsThese devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:1  These devices may not cause harmful interference, and 2  These devices must accept any interference received, including interference that may cause undesired operation.Safety InformationIt is good practice to switch off your wireless devices before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless devices in an air-craft is forbidden by many airlines to prevent interference with communications systems. Applications that could result in use on aircraft should carry appropriate warnings.
European Contact:Centre Education Europe26/36 rue Alfred Nobel93600 Aulnay Sous BoisFranceTEL:  +33 1.58.31.10.60FAX:  +33 1.58.31.10.69www.interwritelearning.frEuropean Union Emission DirectiveThese products are in conformity with the protection requirements of EU Council Di-rective89/366/ECContheapproximationofthelawsoftheMemberStatesrelatingto electromagnetic compatibility.These products have been tested and found to comply with the limits for Class B InformationTechnologyEquipmentaccordingtoCISPR22/EuropeanStandardEN55022. The limits for Class B equipment were derived for typical industrial envi-ronments to provide reasonable protection against interference with licensed com-munication devices.European Union WEEE DirectiveThemanufactureofthisequipmentrequiredtheextractionanduseofnaturalresources. It may contain hazardous substances that could impact health and the environment.• In order to avoid the dissemination of the hazardous substances into the environment and to diminish the pressure on our natural resources, we encourage you to return this product to the appropriate take-back system facility. These facilities reuse or recycle most of the materials in this equipment in a responsible way.• The crossed-out wheeled bin symbol below invites you to use these take-back systems.• If you need more information about the collection, reuse and recycling systems in your area, please contact your local or regional waste authority.• Further information about the responsible end-of-life management of this and other eInstruction products is available on our Web site at                     www.einstruction.com.
    Limited Warranty for the WorkspaceTM RF Hub, RFCOM and Interwrite® MobieInstruction warrants these products to be free from defects in material and workmanship under the following terms.  Complete and return the enclosed warranty registration card to ensure that your products are covered by this warranty.CoveragePartsandlaborarewarrantedforone(1)yearfromthedateofthefirstconsumerpurchasefortheWorkspaceRFHub,RFCOM,and/orInterwriteMobi.Thiswarrantyapplies to the original consumer purchaser only. Within the European Union, the warranty period is two (2) years. Contact your local dealer or distributor for additional warranty information.Warrantyisvalidonlyiforiginalconsumer’spurchaseorleasedateislessthanorequaltosixmonthsfromtheoriginaleInstructionsaledate.Thisinformationwillbecaptured by the system serial number and confirmed by the reseller’s purchase order.A nominal Warranty Handling Fee will be charged after the first 90 days of use and calculated from the date of original consumer purchase. This payment may be made byVisa,MasterCard,orAmericanExpress.Acopyofthesalesreceiptorinvoicewillberequiredforwarrantyverification.ConditionsExceptasspecifiedbelow,thiswarrantycoversalldefectsinmaterialorworkmanshipintheproducts.Thefollowingarenotcoveredbythewarranty:  1.  Any product on which the serial number has been defaced, modified, or removed (if applicable).  2.  Damage, deterioration, or malfunction resulting from:  a.  Accident, misuse, abuse, neglect, fire, water, lightening, or other acts of nature, unauthorized product modification for any purpose, or failure to follow instructions supplied with the product.  b.  Repair, or attempted repair, by anyone not authorized by eInstruction.  c.  Any damage in shipment of the product (claims must be presented to the carrier).  d.  Any other cause which does not relate to a manufacturing defect. 3. AnyproductnotsoldorleasedtoaconsumerwithinsixmonthsofeInstruction’soriginalsaledate.  4.  Consumable parts, e.g., batteries, dry-erase markers, eraser felt.eInstructionwillpayalllaborandmaterialexpensesforcovereditems,butwillnotpayforthefollowing:  1.  Removal or installation charges.  2.  Costs for initial technical adjustments (set up), including adjustments of user controls. 3. Certainshippingcharges.(Paymentofshippingchargesisdiscussedinthenextsectionofthiswarranty.) 4. Packagingcosts.(Customersshouldkeeptheirboxes.)Warranty Service Procedures  1.  To obtain service on your eInstruction product, contact the Technical Support Department to receive a Return Material Authorization Number (RMA#) and shipping instructions by calling:    In United States:  (480) 443-2214 (MST)  InEurope: +331.58.31.10.60(CET) 2. ShiptheproducttoeInstructionwiththeRMA#markedclearlyontheoutsideofthebox.eInstructionreservestherighttorefusetheshipment,ifnotproperlymarked.  3.  Although the consumer must pay any shipping charges to ship the product to eInstruction for warranty service, eInstruction will pay the return shipping charges for ground shipment.  Other shipping options are available at an additional fee.  4.  Whenever warranty service is required, the original dated sales invoice (or a copy) must be presented as proof of warranty coverage, and should be included in shipmentoftheproduct.Inaddition,pleaseincludeyourname,address,telephonenumber,faxnumber,emailaddress,andadescriptionoftheproblem.  5.  If eInstruction determines that the unit is not defective within the terms of the warranty, the consumer shall pay the cost of all freight charges, as well as any repair charges.Technical SupportWeb-based Technical Support is available free of charge at: www.einstruction.com, where current driver releases, as well as comprehensive technical support, troubleshooting, Technical Bulletins and FAQs can be found.Telephone Technical Support is available free of charge to the original consumer for a period of 90 days from the date of purchase of the product. Please contact our Technical Support Department:   In United States:  (480) 443-2214 (MST)  InEurope: +331.58.31.10.60(CET) Youcanalsofaxyourrequestto:   In United States:  (480) 948-5508 (MST)  InEurope: +331.58.31.10.69(CET) Ourtoll-freenumberintheU.S.is:800-856-0732(MST)Disclaimer of Unstated WarrantiesThe warranty printed above is the only warranty applicable to this purchase.  ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  Assuming the warranty above stated is otherwiseapplicable,itisexpresslyunderstoodandagreedthateInstruction’ssoleliability,whetherincontract,tort,underanywarranty,innegligence,orotherwise,shallbe for the repair or replacement of the defective parts, and under no circumstances shall eInstruction be liable for special, indirect, or consequential damages.  The price stated and paid for the equipment is a consideration in limiting eInstruction’s liability.NoticeSomestatesandprovincesdonotallowtheexclusionorlimitationofincidentalorconsequentialdamages,sotheaboveexclusionmaynotapplytoyou.Thiswarrantygives you specific legal rights, and you may have other rights, which vary from state to state, or province to province.ToobtainserviceonyoureInstructionproduct,callourTechnicalSupportDepartmentat(480)443-2214(MST),orfaxusat (480) 948-5508 (MST); in Europe call +331.58.31.10.60(CET),orfaxusat+331.58.31.10.69 (CET). We can also be contacted through our Web site at www.einstruction.com (in US), at EUOffice@gtcocalcomp.com (in Germany), or at infos@calcomp.fr (in France).Important!  All products returned to eInstruction for service must have prior approval in the form of a Return Merchandise Authorization Number (RMA#), which can be obtained by calling the Technical Support Department.
www.einstruction.com/supportEuropean HeadquartersCentre Education Europe26/36 rue Alfred Nobel93600 Aulnay Sous BoisFranceTEL:  +33 1.58.31.10.60FAX:  +33 1.58.31.10.69www.interwritelearning.frSupport:  480.443.2214www.interwritelearning.com/supportCopyright© 2008 eInstructionInterwrite is a registered trademark and Workspace is a trademark of eInstruction Corp.All other products and company names are the trademarks or registered trademarks of their respective owners.The information contained in this document is subject to change without notice. eInstruction assumes no responsibility for technical, or editorial errors, or omissions that may appear in this document, or for the use of this material. Nor does eInstruction make any commitment to update the information contained in this document. This document contains proprietary information which is protected by copyright. All rights reserved. No part of this document can be photocopied or reproduced in any form without the prior, written consent of eInstruction.www.einstruction.com/supportCorporate Headquarters308 N Carroll Blvd Denton, TX  76201Tel:  888.707.6819Fax:  940.565.0959Western Office8224 East Evans Road Scottsdale, Arizona  85260Tel:  480.948.6540Support:  480.443.2214Fax:  480.948.5508

Navigation menu