eMeet technology M1 Business Smart Assistant User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3337873
Application ID	5ns8crRkqw3LjdHoGrXHKQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	89.16kB (1114558 bits)
Date Submitted	2017-03-29 00:00:00
Date Available	2017-03-30 00:00:00
Creation Date	2017-03-25 13:15:46
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2017-03-25 13:15:50
Document Title	User Manual
Document Creator	Adobe InDesign CC 2014 (Windows)

Packaging Contents
Overview
Using Guide
• Connecting via Bluetooth
Bluetooth
Pairing
Mode
• Power ON/OFF
②
OfficeCore M1
User Manual
Pairing with Enable Bluetooth of your device and search
Bluetooth: Bluetooth devices available. Select “eMeet M1” from
the list and start the pairing. If a PIN is requested,
enter “0000”. Bluetooth light is solid blue when the
connection is completed successfully.
ON
①
Guarantee
User Manual
④
③
Features
≤ 10m
⑤
⑥
Thank you for purchasing eMeet product. OfficeCore M1 is
the perfect solution for conference calls with its compact
design and outstanding sound quality.
⑦
⑨
360º omni-directional audio pick up and
8M(26ft) Far-field voice recognition
⑧
Built-in VoiceIA™ algorithm to ensure high quality
sound
① Bluetooth
② Bluetooth / USB light
⑤ Mic mute/ unmute
⑥ Answer/ drop call
③ Volume down
Plug and play via Bluetooth or USB
12 hours talk time, 20 hours music playback and 1
month standby time, fully charge 2-3 iphone 7
⑦ LED indication
⑨ USB output
Compact and portable design, take your business
trip anywhere at any time
⑩
Power on:
Press and hold the power button for 2
seconds until the LED indication turns blue.
Power off:
Press and hold the power button for 2
seconds until the LED indication turns blue.
M1 enters Bluetooth pairing mode
automatically for the first use. Press and hold
Bluetooth button for 3 seconds to switch
Bluetooth device. Bluetooth light flashes fast.
Phone and
music via
Bluetooth:
eMeet
M1
Make phone calls and play music via Bluetooth
once connected.
• Connecting via USB
Checking
Press the power button and the LED
battery level: indication turns green to show the current
battery level.
④ Volume up
⑧ Power on/ off
⑩ Micro USB input
Supports internet calls, such as Skype, Google
Hangout, Microsoft Lync, Cisco, Avaya, etc
Entering USB
mode:
Connect M1 to your device by using a USB
cable and USB light turns solid orange.
Troubleshooting
Speaker Rated Output 3W RMS
Power
Phone and
Make phone calls and play music once
music via USB: connected via USB cable.
• Charging and Recharging
Notice: Power adapter is not provided,
customer need to buy separately.
Recharging M1: Recharge M1 by using a USB charger with
DC 5V output or by connecting a laptop.
While recharging by a laptop, you can
make a call via M1 at the same time.
Power light is solid red while recharging
M1 .
Charging your
smartphone:
Technical Data
Symptom
Possible Causes
Solution
Fail to turn on
Low battery or
empty power
Recharge
No sound
Disconnected or
low volume
Check the
connection or
adjust volume of
connected device
100Hz-10KHz
Distorted or
unclear sound
Volume level too
high or too low
Adjust volume of
connected device
Mic Direction:
360° omni-directional
Fail to talk
Wrong USB cable
Use original USB
cable
Battery:
3.7V/5200mAh
Charging Time:
3-4 hours
Play Time:
12 hours (call); 20 hours (music,
varies by content and volume level)
Malfunction of
Fail to recharge
charger or fully
M1
recharged
Recharging Input:
5V/2A
Dimension:
110x110x29mm
Weight:
273 g (main unit)
Frequency Response:
20Hz~20KHz
Signal/Noise Ratio:
≥80dB
Bluetooth® Version
V4.1
Bluetooth® Range
10m
Mic Sensibility:
26dBFS
Mic Frequency
Response:
Warning
FCC
① Do not disassemble or repair the product yourself.
Always as for help from local dealer if necessary.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
② To preserve battery lifespan, fully recharge the
product when not in use for a long period of time or at
low battery level.
③ Never place the product near naked flames or other
heat sources, including direct sunlight.
④ Danger of explosion if batteries are incorrectly
replaced. Replace only with the same or equivalent
type.
⑤ The product should be placed in a dry, ventilated
place indoor. Never expose the product and
accessories to rain or water. Never cover the
ventilation slots or other openings on the product.
Use a proper
charger
⑥ To protect environment, exhausted batteries should
be disposed of properly or return to the manufacturer.
Use this product in the
areas of an altitude of
no more than 2000
meters only.
Use this product
in the non-tropical
regions only.
* The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Use M1 as a portable battery to charge
your smartphone.
10
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12
Create Date                     : 2017:03:25 13:15:46+08:00
Metadata Date                   : 2017:03:25 13:15:50+08:00
Modify Date                     : 2017:03:25 13:15:50+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Windows)
Instance ID                     : uuid:14adddc8-f337-4b83-a5d5-e27cc8072dc2
Original Document ID            : xmp.did:b43fd361-ca90-c549-acb3-f75027376911
Document ID                     : xmp.id:11e6ed34-8fad-4b48-93dd-6b8135ca078b
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:63e4a6f0-8dc1-8644-ad5d-b1e37e8efd88
Derived From Document ID        : xmp.did:6dad8358-9d76-da48-9334-998d29431146
Derived From Original Document ID: xmp.did:b43fd361-ca90-c549-acb3-f75027376911
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Windows)
History Changed                 : /
History When                    : 2017:03:25 13:15:46+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2014 (Windows)

EXIF Metadata provided by EXIF.tools