eMoMo Technology ITABLE406 Smart sofa control panel with bluetooth and wireless charging User Manual iTable406 0814 HMI
eMoMo Technology Co., Ltd Smart sofa control panel with bluetooth and wireless charging iTable406 0814 HMI
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3966473 |
| Application ID | 8is5BywZTkGCNcToR0FCaQ== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 200.74kB (2509193 bits) |
| Date Submitted | 2018-08-16 00:00:00 |
| Date Available | 2018-08-16 00:00:00 |
| Creation Date | 2018-08-15 10:28:17 |
| Producing Software | Corel PDF Engine Version 14.0.0.701 |
| Document Lastmod | 2018-08-16 11:02:29 |
| Document Title | iTable406 0814 USER MANUAL HMI 专用 |
| Document Creator | CorelDRAW |
| Document Author: | Administrator |
Specification USB mode can't work Input AC 100~240V Power 120W Audio input DC 13V Power for the audio 17W Audio frequency response 40~22 kHz Signal-to noise ratio ＞65 db Bluetooth edition 4.0 Recliner input DC 29V Power for the recliner 120W USB output 5V 2.1A max for each Wireless charging output 5V 1A max for each Socket output Total AC 100~240V 8A Frequently asked questions Problem No power No sound at all The unit doesn't response Bluetooth can't be paired Possible cause and correction 1.The plug is plugged into a useless socket. Change a useful socket. 2.The plug isn't plugged properly. Re-plug it and ensure it is plugged properly. 1.The volume switch is on minimum. increase the volume. 2. The unit is in earphone mode. Disconnect the earphone. 1.Safety switch has pop up. Press it down to reset the unit. 2. The unit is poorly connected. Check all connectors and reconnect them. 1.It has been connected. Press to disconnect the previous BT and try again. 2. Do not pair the Bluetooth behind a wall or in a conner. Keep the working space in 8M. Caution » Congratulations on your new smart table top. Please read the user manual carefully before using the unit. Then operate it properly. » This apparatus is supposed to be connected with AC 100V-240V power supply. » The unit should be powered off before unplugging it. » Do not touch the sockets at any time, it may cause a electricity shock. » Do not pull the silicon cover of the power supply too hard, it may cause a damage to the product. » Ensure the apparatus is installed stably. » The apparatus is for in door use only. » Do not used in extreme environment. » Do not place the apparatus in sunlight exposure or near heat source. » Do not try to take any components away off the apparatus because there is not useless component and it may cause electricity shock. » Children under 13 years old should use it under adults’ supervision. » Never try to repair this product by yourself as it may cause a void warranty. Please contact with the store or customer service for help if problem occurs. » This apparatus might be updated as technology & system upgraded. The corresponding revision of the manual will not notify specially. » FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equipment should be installed and operated with minimum Do not pull the silicon cover of the power supply too hard, it may distance 20 cm between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. » NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. supply. However, there is no guarantee that interference will not occur in a AUX mode can't work 1.Availablefor MP3 and WMA format. Others can't be played. 2.The USB is broken. Try to change a useful one or try to upgrade your device. 1.The music source is useless. Try another one. 2. The auxin cable is useless. Change a useful cable. Warranty » This limited warranty doesn't resist your statutory rights in any way. » The warranty period is 2 years from the date of purchase. » you can certify your purchase date either by the orginal Invoice/ Receipt, or by the registration code. » T he warranty is limited to the repair of the faulty audio device. » T he warranty does not cover any transport or other direct/indirect costs or any risks associated with removing/dismounting, transport at i o n, and installing the products. Part number and functions Part number & functions Functions P/N iTable406R P/N Functions iTable406RW iTable406 iTable406W iTable406TR iTable406TRW iTable40624HR iTable40624HRW iTable40624HRR iTable40624HRRW iTable40624HTR iTable40624HTRW iTable40624HTRL iTable40624HTRLW It does not apply: » the unit is misused. » damage due to inexpertly carried out installation, incorrect connection, or incorrect packing. » damage attributed to utilization not specified in the operating instructions, to negligence or modification. » damage due to faulty or unsuitable peripheral devices. » damage caused by accidents, lighting, water, fire, heat, war, civil unrest, or other events beyond the control of t he manufacturer and its distribution partners. » I f repairs or modifications have ben performed by unauthorized persons » If you want to make a claim under the warranty, please always to contact the store from whom you purchase this product. Remark Use product correctly and keep it probably will prolong the service life. particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. FCC ID: A4E-ITABLE406 Panel description Buttons and functions Icon Function Power on/off Press for 3s to disconnect the BT pairing. Press shortly to switch into BT mode Play/pause the music track. Decrease the volume. Increase the volume. The last track. The next track. AUX-IN Audio control panel Chair control panel Listen to music via earphones. Recline the chair. Power on/off Close the chair. Return the chair to Upright Position. Wireless charge area Lift the headrest. Retract the headrest. Speaker Activate the lumbar support. Retract the lumbar support. 5V 2.1A USB Turn on/off heating pad. 5V 2.1A USB with Mp3 player function Safety switch Turn on/off vibrating massage function. Silicon cover for power supply Turn on/off base light. AC 100~240V power supply. USB MP3 player or 5V 2.1A max charging outlet. Wireless charging area. Operation » Plug the unit into a household power supply.(AC 100~240V) » Touch to turn on the device. All buttons light on and the BT begins to search signal. » Turn on the BT function of your device, search BT signal “eMoMo iTable406".Pair your BT device with “eMoMo iTable406". If it is paired successfully, a “Du” sound will made and you can Play music by your BT device. If you want to disconnect the BT, touch for 3s to disconnect it. » Touch to play or pause the music file. » Touch time after time to decrease volume gradually. Touch and hold it to decrease volume rapidly. time after time to increase volume gradually. Touch and » Touch hold it to increase volume rapidly. » Touch to back to the last track. » Touch to leap to the next track. » Connect your AUX device with the product via outlet by a AUX cable, the audio will switch into AUX audio mode automatically and you can play music via your AUX device . » Insert a USB with MP3 audio file in into the USB next to AUX-IN outlet, the audio will switch into USB MP3 player and play the MP3 in USB automatically. » Touch shortly could cut off the AUX and USB connection. Then you can pair the BT and play music by BT device. » Connect your earphones with outlet to listen music via earphones. » Touch to recline the chair. » Touch to close the chair. » Touch to return the chair to Upright Position. » Touch to lift the headrest. » Touch to retract the headrest. » Touch to activate the lumbar support. » Touch to retract the lumbar support. » Touch to turn on/off heating pad. It will be shut down in 1 hour automatically as it reaches the maximum work time. » Touch to turn on/off vibrating massage function. It will be shut down in 30 minutes automatically as it reaches the maximum work time. » Touch to turn on/off the base light. It will be shut down in 4 hours if there is no operation on the smart table top. » Put your device on the wireless charging area to charge for it. Ensure that the receiver of your device is aligned with logo. » If unexpected problem occurs on the product, like water flow in , the safety switch will cut off the power then pop up. After troubleshooting, press the safety switch down could reset it so it could work normally. But if the product is still with problem, the switch can not be press down. » Swivel clockwise to open the silicon cover for power supply. Carve a slot about L350*W15mm to support the device 1.Hole size Hole size About 378mm Installation: Elastic tape About 378mm（Device size is 370mm，broaden/narrow according to the thick of the foam and leather.） 2.Put the device into the mounting hole, ensure the device and slot matched properly. Fix with screws：BA3.5*35 3.Fix accessory plate Accessory plate Fix on the bottom with screws.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2018:08:15 10:28:17+08:00 Modify Date : 2018:08:16 11:02:29+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Format : application/pdf Creator : Administrator Title : iTable406 0814 USER MANUAL HMI 专用 Creator Tool : CorelDRAW Metadata Date : 2018:08:16 11:02:29+08:00 Producer : Corel PDF Engine Version 14.0.0.701 Document ID : uuid:fdbbc04c-c784-46f7-ba1f-a77ab073f18b Instance ID : uuid:b5cfe32b-dd5f-4c61-a028-8a455f63f54e Page Count : 2EXIF Metadata provided by EXIF.tools