ecobee orporated EBSMSW1V002 Light Switch User Manual Hyperion English Installation Manual 171208 indd

ecobee Incorporated Light Switch Hyperion English Installation Manual 171208 indd

UserManual.wiki >

ecobee orporated >

EBSMSW1V002 User Manual >

Contents

1. User Manual I
2. User Manual II

User Manual I

How to install your ecobeeSwitch+

Installing this product involves handling high voltage wiring. Each step of the enclosed instructions must be followed carefully. To avoid fire, personal injury, or death, turn off your circuit breakers and follow the proper safety precautions before proceeding.UNSURE ABOUT HANDLING ELECTRICAL WIRING? CONSULT A QUALIFIED ELECTRICIAN.Warning

Step-by-step visual guides that land you right at registrationDownload the ecobee app—where you’ll find videos, diagrams, and a guided tour of registration and smart features.Getting your Switch+ up and running is as easy as 1-2-31. Download the ecobee app.2. Install your Switch+.3. Register ecobee Switch+ to unlock Amazon Alexa and other smart features. You’ll need to turn off your power for installation. We recommend getting started during the day.Daylight helps

What’s in the box:Wall plateecobee Switch+4 wire nuts2 mounting screwsTools you’ll need: Flat head screwdriverPhillips head #2screwdriverPliers(optional)

Compatibilityand rating1Is this location controlled by only one switch?ecobee Switch+ can only be installed in locations where the light is controlled by only one switch.Rating120V AC 60Hz600W Incandescent150W I.BAL (LED and CFL)Do you have at least one neutral wire in your set-up?Neutral wires are white and come as either a single wire or a pair. Unsure? Keep reading for instructions.

Turn off the circuit breaker for the switch you’re replacing. If breakers aren’t labeled, turn off the master power.Your lights should NOT turn on. Confirm you’ve turned off the right breaker by flipping your wall switch on and off several times.Before proceeding2Turn off your breakers

If paint has dried around your switch, it may require more force to unmount it. Unscrew your existing wall plate and switch from the wall. Disconnect the wires attached to your switch by turning the wire nuts counterclockwise. Remove your existing switch. Remove old switch3

You should see 4 types of wires in your wall box. Here’s how to identify them.Identifywires4Line and load wires (black or red)are connected to your existing switch.Ground wire (exposed copper or green) typically comes from the wall box. Neutral wires (white)typically come in a pair and are fastened together by a wire nut.Needed for installation.

5Line wire (black)Switch wires (black) Ground wire (green)Neutral wire (white)Load wire (black)Match the neutral wire from your Switch+ to the 2 neutral wires from your wall box. Together, insert them into the wire nut to connect. Match the remaining wires as shown and secure with wire nuts.Connect your Switch+Switch wireSwitch wireNeutral wireGround wireLine wireLoad wireNeutral pairGround wire or screwDon’t know how to use a wire nut? Turn the page for help.

If you have pliers, use them to gently twist wires together before inserting them into the wire nut. You can also use them to straighten curved wires. If they separate or shift inside the nut, realign the wires and replace the cap. Twist the cap clockwise until the wires are secured.Wire nuts are used to connect two or more wires together.Connecting wiresHold the wires you’re connecting parallel to one another so that the ends are aligned.Holding the wires together and parallel, insert them into a wire nut. Twist the wire nut clockwise until secure. Double-check by tugging on the wires gently.Wire nuts 101

Fit wire nuts into wall box6Push each wire nut in—one at a time—as close to the back of the wallbox as possible.

Using the mounting screws provided, mount your ecobee Switch+. Make sure it’s level and flush against the wall.Mount ecobee Switch+7

Return to your circuit breaker and turn on the power for the switch you just replaced. 8Power system back on

Test yourSwitch+9Give your Switch+ a moment to power on. Test it by turning it on and off, using the on/off button on the front of your Switch+. If it powers on, snap on your wall plate. If your Switch+ does not power on, turn off your circuit breaker and double check that your wires are connected securely. Then test again.Still a no-go? Call ecobee customer support at 1-877-932-6233.

Keep going on the ecobee app to register your device, connect to Wi-Fi, and unlock smart features. To connect to HomeKit, use the ecobee app on your iOS device and refer to the code on the back of this manual.Congratulations, you did it!

Your ecobee Switch+Light bar Glows when Alexa is responding to you.On/off button Turns it on or off the old-fashioned way.Night lightKeeps your nights fumble-free.Mic off button Put Alexa on Do Not Disturb.Action buttonHold to interrupt Alexa.SpeakerPlay music, listen to the news, and more.Occupancy sensor Turns on the lights when you walk into the room, and off when you leave.

Ask Alexa* Ask to turn the lights on or off, set a timer, read the news or weather, play music or podcasts, and more.Turns off your lights for youWe’ll take care of it when the room is empty. Here’s what yourSwitch+ can do Go hands-freeHave your lights turn on when you enter the room and it’s dark.Smarter outdoor lightingUpgrade your lighting to automatically turn on at sunset and off when you choose.Night lightEnable the night light setting on your ecobee app to make your Switch+ glow in the dark.

Troubleshootingecobee.com support@ecobee.com 1-877-932-6233We’re here to helpPress and hold the on/off button on the front of your Switch+ for 5 seconds.Using voice prompts*, your Switch+ will cycle through the options: reset Wi-Fi, reset HomeKit, restart device, and reset device to factory settings.Select an option by pressing the on/off button again, or cancel the menu by pressing either of the top buttons.*Not all languages may be available on Amazon Alexa Voice Service. Go to Amazon.com for the list of currently supported languages.

Approvals This product was designed and built in accordance to RoHS directive 2002/95/EC and contains no hazardous substances as defined by this directive. FCC Compliance Statement Compliance Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.Changes or modifications that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment. RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 8 inches during normal operation. Industry Canada (IC) Compliance Notice: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.

RF Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must be installed to provide a separation distance of at least 8 inches from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. FCC ID: WR9EBSMSW1V002 IC ID: 7981A-EBSMSW1V002 CAN ICES-3 (B)/NMB-3(B) Designed in Canada. Assembled in China. Warning: Changes or modifications not expressly approved by ecobee Inc. could void the user’s authority to operate the equipment.1-Year Limited Warranty ecobee warrants that for a period of one (1) year from the date of purchase by the consumer (“Customer”), the Switch+ (the “Product”) shall be free of defects in materials and workmanship under normal use and service. During the warranty period, ecobee shall, at its option, repair or replace any defective Products, at no charge. Any replacement and/or repaired device are warranted for the remainder of the original warranty or ninety (90) days, whichever is longer. A proof-of-purchase will be required from the Customer in order for ecobee to provide a replacement and/or repaired device. This Warranty is valid only for Product installed in the country in which it is purchased.If the product is defective, call Customer Service at 1-877-932-6233. ecobee will make the determination whether a replacement product can be sent to you or whether the product should be returned to our address. In the event of a failure of a Product, Customer may: a. if Customer did not purchase the Product directly from ecobee, contact the third party contractor from whom the Product was purchased to obtain an equivalent replacement product, provided the contractor determines that the returned Product is defective and Customer is otherwise eligible to receive a replacement product;b. contact ecobee directly for service assistance at 1-877-932-6233 and ecobee will make the determination whether an advance equivalent replacement Product can be sent to Customer with return shipping supplies (in which case a hold shall be put on Customer’s credit card for the value of the replacement Product until ecobee has received the defective Product). Product should be returned to our address. If the returned Product is found by ecobee to be defective and Customer is otherwise eligible to receive a replacement product, no amount shall be charged to Customer’s credit card; or c. ship the defective Product directly to ecobee, in which case Customer shall contact ecobee directly at 1-877-932-6233, so ecobee can make the required shipping arrangements. Upon receipt of the defective Product, ecobee will ship an equivalent replacement product to Customer, provided the returned Product is found by ecobee to be defective and Customer is otherwise eligible to receive a replacement product.