ecom instruments 300011GR02 Ci70 User Manual 300011AL14E01 FCC Compliance Statement
ecom instruments GmbH Ci70 300011AL14E01 FCC Compliance Statement
Contents
- 1. user manual
- 2. FCC Compliance Statement
- 3. user manual statement 300011AL35E00
- 4. User Manual i.roc Ci70 -Ex
- 5. 300011AL01A00 User Manual i.roc Ci70 -Ex
- 6. 300011AL14E01_FCC Compliance Statement
300011AL14E01_FCC Compliance Statement
Communication
Mobile Computing
Portable Lighting
Measurement & Calibration
FCC Compliance Statement
for i.roc Ci70 -Ex / Model No. Ci70AN2XX00 / Ci70AQ2XX00
This Statement is part of the User Manual
Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for
future reference
Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH. The use of
accessories other than those recommended, or changes to this product that are not approved by ecom instruments GmbH,
may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.
Caution: For use with ecom AM Ci70 -Ex only. See battery instructions. No user-serviceable parts. Charge only with the
charging devices mentioned in section 4. “Safety Regulations”. Use of incorrect charger may present a risk of fire or explosion.
Battery Recycling Information
This product contains or uses a lithium-ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent
battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid
waste stream. Contact your ecom instruments Service Center for recycling or disposal information.
802.11 Radio Precaution Statement
Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards.
A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual.
Radiation Exposure Statement
Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1,
Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European
Committee for Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation.
If a body worn accessory is not purchased from ecom, the accessory must contain no metal.
Communication
Mobile Computing
Portable Lighting
Measurement & Calibration
U.S.A. Digital Emissions Compliance
For a Class A digital device or peripheral, the user instructions shall include the following or similar statement, placed in a
prominent location in the text of the manual:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
FCC § 15.19 labeling requirements
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
FCC § 15.21 Information to user
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC § 15.105 Information to user
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
RF Exposure Information (SAR)
This model device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured
not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission
of the U. S. Government.
The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC
with the device transmitting at its highest certified level, the actual SAR level of the device while operating can be well below
the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser
required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
While there may be differences between the SAR levels of various devices and at various positions, the all meet the
government requirement.
The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be
found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on the below
Communication
Mobile Computing
Portable Lighting
Measurement & Calibration
FCC ID: XAM300011GR01
This device is compliant with SAR for general population / uncontrolled exposure limits in SNAI / IEEE C95.1-1999 and had
been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.
Specific Absorption Rate (SAR): 0.471 W/kg
This product has been tested and found to comply with the following standards:
- For the worst case positions, the portable device i.roc Ci70 –Ex is in compliance with the IC RSS 102 Issue 4 (RSS
102) and Federal Communications Commission (FCC) Guidelines (OET 65) for uncontrolled exposure. SAR
assessment in body worn was conducted with a distance of 0 mm between the housing of the handheld and the flat
phantom.
- EM 62311:2008: Assessment of electronic and electrical equipment related to human exposure restrictions for
electromagnetic fields (0 Hz – 300 GHz).
Canadian Digital Apparatus Compliance
This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Industry Canada Statements
Le present appareil est conforme aux CNR d’Industrie Canada applicaables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: 1) L’appareil ne doit pas produire de brouillage, et 2) l’utilisat
de l’appareil doit accepter tout brouillage radioélectrique sui, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
Canada Class A Statement
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations
Cet appareil numérique de la Classe A Respecte toutes les exigences du Règlement sur le matérial brouiller du Canada.
For Users in english-speaking regions (en)
Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future
reference.
Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH. The use of
accassories other than those recommended, or changes to the product that is not approved by ecom instruments GmbH may
void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.
Pour les utilisateurs canadiens (fr)
Mise en garde : Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse. Conservez ce
supplément pour référence future.
Les utilisateurs de ce produit sont avisés d’utiliser des accessoires et des périphériques approuvés par ecom instruments GmbH.
L’utilisation d’accessoires autres que ceux recommandés ou des changements à ce produit qui ne sont pas approuvés par ecom
instruments GmbH peuvent annuler la conformité de ce produit et mettre fin u droit qu’a l’usager d’utiliser l’équipement.
Communication
Mobile Computing
Portable Lighting
Measurement & Calibration
802.11a Radio Precaution Statement
- The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;
- The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply
with the e.i.r.p. limit; and
- The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits
specified for point-to-point and non point-to-point operation as appropriate.
- Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands
5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN
devices.
- Les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur
afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
- Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit
se conformer à la limite de p.i.r.e.;
- Le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la
limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.
- De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces
radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Communication
Mobile Computing
Portable Lighting
Measurement & Calibration
CE Compliance Statement
Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for
future reference
Users of this product are cautioned to use accessories and peripherals approved by ecom instruments GmbH. The use of
accessories other than those recommended, or changes to this product that are not approved by ecom instruments GmbH,
may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.
Caution: For use with ecom AM Ci70 -Ex only. See battery instructions. No user-serviceable parts. Charge only with the
charging devices mentioned in section 4. “Safety Regulations”. Use of incorrect charger may present a risk of fi re or explosion.
Battery Recycling Information
This product contains or uses a lithium-ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent
battery should be disposed of by a qualifi ed recycler or hazardous materials handler. Do not mix this battery with the solid
waste stream. Contact your ecom instruments Service Center for recycling or disposal information.
802.11 Radio Precaution Statement
Caution: Users are responsible for confi guring the channels of operation that comply with their country regulatory standards.
A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual.
Radiation Exposure Statement
Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE
C95.1, Federal Communications Commission Offi ce of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and
European Committee for Electrotechnical Standardization (CENELEC) limits for exposure to radio frequency (RF) radiation.
If a body worn accessory is not purchased from ecom, the accessory must contain no metal and provide a 1.2 cm (.5 in.) space
between the device and the body.
Communication
Mobile Computing
Portable Lighting
Measurement & Calibration
Laser Compliance and Precaution
This product complies with the following standards for laser safety:
IEC 60825-1:2007/EN 60825-1:2008-05: Class 2 (1 mW, 630 – 670 nm)
Caution: 802.11a wireless LAN 5150 to 5350 MHz (5,15 to 5,35 GHz) is limited to indoor use only.
Note: Dynamic Frequency Selection and Transmit Power Control are required on the 5250 to 5350 MHz and 5470 to 5725
MHz frequency range.
EU – R&TTE Declaration
ecom instruments GmbH declares that this device is in accordance with the essential requirements and other provisions of
R&TTE Directive (1995/5/EC).
0700
This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the European Union
and other countries as noted in the table below.
This equipment may be operated in the following countries without restriction:
AT, BE, CY, CZ, DK, EE, FI, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, CH, BG, RO, TR
802.11 b/g or Bluetooth Restrictions (Revision ERC/REC 70-03 E 2012-07, Annex3 Band A):
NO: This subsections does not apply for the geographical area within a radius of 20 km from the center for Ny-Ålesund.
WEEE-Reg.-Nr. DE 934 99306
300011AL14E01
Änderungen vorbehalten. Subject to change.
ecom instruments GmbH · Industriestr. 2 · 97959 Assamstadt · Germany
Phone: + 49 (0) 62 94 / 42 24 0 · Fax: + 49 (0) 62 94 / 42 24 100
E-Mail: sales@ecom-ex.com · www.ecom-ex.com
Copyright© 2013 ecom instruments GmbH.
Der Inhalt dieses Dokuments darf ohne vorherige schriftliche Genehmigung durch die ecom instruments GmbH in keiner Form, weder ganz noch teilweise ver-
vielfältigt, weitergegeben, verbreitet oder gespeichert werden.
Der Inhalt dieses Dokuments wird so präsentiert, wie er aktuell vorliegt. Die ecom instruments GmbH übennimmt weder ausdrücklich noch stillschweigend
irgendeine Gewährleistung für die Richtigkeit oder Vollständigkeit des Inhalts dieses
Dokuments, einschließlich, aber nicht beschränkt auf die stillschweigende
Garantie der Markttauglichkeit und der Eignung für einen bestimmten Zweck, es sei denn, anwendbare Gesetze oder Rechtsprechungen schreiben zwingend eine
Haftung vor. Die ecom instruments GmbH behält sich das Recht vor, jederzeit ohne vorherige Ankündigung Änderungen an diesem Dokument vorzunehmen
oder das Dokument zurückzuziehen.
Copyright© 2013 ecom instruments GmbH.
The contents of this document, either in part or in their entirety, may not be reproduced, forwarded, distributed or saved in any way without ecom instruments GmbH prior
written consent.
The contents of this document are presented as they currently exist. ecom instruments GmbH does not provide any express or tacit guarantee for the correctness or com-
pleteness of the contents of this document, including, but not restricted to, the tacit guarantee of market suitability or fi tness for a specifi c purpose unless applicable laws
or court decisions make liability mandatory. ecom instruments GmbH reserves the right to make changes to this document or to withdraw it any time without prior notice.