heng shang pin technology SEED Bluetooth Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3732420
Application ID	E8kx1QaBuomP6oYo+aMvow==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.18kB (1002277 bits)
Date Submitted	2018-01-29 00:00:00
Date Available	2018-01-29 00:00:00
Creation Date	2018-01-23 11:08:44
Producing Software	Acrobat Distiller 15.0 (Windows)
Document Lastmod	2018-01-23 11:08:44
Document Title	Microsoft Word - User Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ntek136

Enjoy your hands-free communications
User Manual
For
N/A
SEED
1 / 19
FCC ID: 2ALXX-SEED
1. WELCOME
Thank you for using this wireless Headset. We
hope you will enjoy it!
FEATURES
Voice guidance
Battery and pairing status display
HD Voice
Long talk time – Up to 7 hours
Power Nap feature
Wireless freedom ‐ Up to 10m/33ft
Paring right after power on
Voice assistant function & Siri supported
2 / 19
2. HEADSET OVERVIEW
3 / 19
3. HOW TO WEAR
3.1 Worn on Left or Right Ear
The headset can be worn on the left or right
ear. To switch ear:
1.Rotate the ear hook 180°
2.Twist it around so the eartip is on the
other side
3.Lower the ear hook
4 / 19
3.2 Adjust the ear hook
1. Lengthen the ear hook, to fit big ears
2. Retract the ear hook, to fit small ears.
4. HOW TO CHARGE THE BATTERY
Plug the headset into any available USB port
on your PC using the USB cable.
5 / 19
NOTE1: For safety reasons, we designed this
headset to be not functional while it is under
charging.
NOTE2: If the output of your charger for this
headset is higher than 5V, it will damage your
headset potentially. You must use standard
charger(5V or lower) for your headset.
It takes approx. 2 hours to fully charge the
battery.
6 / 19
5. HOW TO CONNECT
5.1 Get Paired
The first time you power on your headset, it
begins the pairing process.
1. Wearing your headset, press the “MFB”
button for 2 seconds. You will hear “Power
ON” and the headset indicator lights flash
red and blue.
7 / 19
2. The indicator lights will flash blue when
your headset get paired successfully; but if
the headset failure to match within 3 min, it
will power off automatically.
3. Activate Bluetooth® on your phone and set
it to search for new devices.
• iPhone® Settings > Bluetooth > On*
• Android™ > Bluetooth: On > Scan for
devices*
NOTE *Menus may vary by device.
4. Select “Spoon B1”
If necessary, enter four zeros (0000) for
the passcode or accept the connection.
Once successfully paired, you hear
“connected” and the headset indicator lights
stop flashing.
NOTE*The headset powers off automatically
after 3 min without paired to phones.
8 / 19
5.2 Pair another phone
After pairing your headset to your phone you
may want to pair another or new phone.
Deactivate Bluetooth® on your first phone.
1. Tap and hold the “MFB” button for 6 secs.
The headset indicator lights flash red and
turn off.
2. Tap and hold the “MFB” button for 2 secs,
the headset indicator lights flash red and
blue.
3. Activate Bluetooth® on your another
phone and set it to search for new devices.
4. Select “Spoon B1”
If necessary, enter four zeros (0000) for
the passcode or accept the connection. Once
successfully paired, the headset indicator lights
stop flashing and you will hear “Connected”.
5. Activate Bluetooth® on your first phone.
9 / 19
6. Tap and hold the “MFB” button for 6 secs
to power off the headset.
7. Tap and hold the “MFB” button for 2 secs
to power on the headset, then you can get
two phones automatically connect with
your phone.
NOTE: If your PC does not support Bluetooth
function or remind you need driver, you need
to use an external Bluetooth USB Adapter.
6. HOW TO ADJUST VOLUME
10 / 19
During Music playing or voice calls, shortly
tap the button “+” or “‐” can adjust voice
volume.
 Shortly tap “+” button for once,
volume will increase a little, tap
continually can get the volume
increased continually, you get the
highest voice when you hear a “BIP”.
 Shortly tap “‐” button for once,
11 / 19
volume will decrease a little, tap continually
can get the volume decrease continually, you
get the lowest voice when you hear a “BIP” .
7. HOW TO SWITCH SONGS
During Music Playing, tap and hold the
Volume button can switch forward/backward
songs.
 Tap the volume button “‐”
12 / 19
and hold for 4secs, you will hear a “BIP” and
then forward to next song.
 Tap the volume button “+” and hold
for 4secs, you will hear a “BIP” and
then backward to previous song.
8. HOW TO MUTE DURING CALL
During phone calls, click the mute button
can enable/disable mute function.
 Click the mute button you will get
voice prompt “mute on” , voice “mute” will
prompt every 2 minutes when keep in mute
state.
 Click again the mute button you will
get voice prompt “mute off” means
unmuted.
13 / 19
10.USER GUIDE SUMMARY
FUNCTION
STEP
Power On/Pair
Press and hold the “MFB” for 2 secs
Power off
Press and hold the “MFB” for 6 secs
Answer Call
Click the Multifunction button
14 / 19
Siri
End Call
Click the Multifunction button
Reject call
Press and hold the Multifunction
button for 3 secs
Activate voice
Refer to Section 9.
dialing (phone
dependent)
Redial last
Double‐click the Multifunction
number
button
Adjust the
Refer to section 6
volume
Play or pause
Click the Multifunction button
streaming
audio
Play next or back Refer to section 7
streaming audio
Restore to
Press and hold the Multifunction
factory settings
button for 3 secs when charging.
15 / 19
11. Q&A
Q Why do I have crackling noise?
A Bluetooth is a radio technology that is
sensitive to objects between the headset and
the connected device. Ensure the headset
and the connected device are within range
(up to 10 meters or 33 feet).
Q What is the range of the headset?
A This Bluetooth Headset supports the
following maximum ranges: 10m/33ft.
Q Why can’t I hear anything?
A You might need to increase the speaker
volume, or ensure that the headset is
connected to a device.
Q Why couldn’t my headset connect with
the device?
16 / 19
A Check your device’s Bluetooth menu and
delete/forget the headset. Re‐connect the
headset to your Bluetooth device following
the Bluetooth connection
instructions(Section 5).
Q How to take care of my headset?
A Recommend to power off the headset
and put it in storage case when not use.
Avoid storage at extreme temperatures
(above 35°C/95°F or below ‐20°C/‐4°F). It will
shorten battery life and may affect headset
operation.
Do not expose the headset to rain or other
liquids.
12. TECHNICAL SPECIFICATIONS
17 / 19
Wireless
Headset
SPECIFICATION
Weight:
0.56ounces
Dimensions:
3.15 * 1.96 * 0.69 inches
Microphones:
Omni‐directional mic
Speaker:
Dynamic speaker
Operating range:
10 m (33 ft)
Bluetooth version:
4.1
Paired devices:
1 to 2 at the same time
Supported Bluetooth
profiles:
A2DP(v1.2), Hands Free
Profile (v1.6), Headset
profile(v1.2)
Talk time:
Up to 6 hours
Data Encryption:
128 bits encrypted
Standby time:
Up to 120 hours
Operating temperature: ‐10°C to 55°C (14°F to 131°F)
Storage temperature:
‐20° C to 35° C (‐4 F to 95 F)
Pairing passkey or PIN:
0000
18 / 19
FCC Requirement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The d
evice can be used in portable exposure condition without restriction.
FCC ID: 2ALXX-SEED
19 / 19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ntek136
Create Date                     : 2018:01:23 11:08:44+08:00
Modify Date                     : 2018:01:23 11:08:44+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : ntek136
Title                           : Microsoft Word - User Manual.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 15.0 (Windows)
Document ID                     : uuid:f66460be-75e2-429b-a786-20af95ca3591
Instance ID                     : uuid:9f4135a3-3248-4f65-b0a4-08bf3b0154a9
Page Count                      : 19

EXIF Metadata provided by EXIF.tools