i Mobile Technology IMT-10PLUS Tablet PC with GSM/GPRS 850/1900, WCDMA/HSPA FDD II, V, 802.11 b/g/n, BT, BLE and GPS User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3256403
Application ID	lp0wBOX7J/Rubp8o+R05ng==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.05kB (488134 bits)
Date Submitted	2017-01-12 00:00:00
Date Available	2017-01-13 00:00:00
Creation Date	2016-12-15 13:48:05
Producing Software	PDF-XChange 4.0.163.0 [ABBYY] (Windows Seven Ultimate Professional Service Pack 1 (Build 7601))
Document Lastmod	0000-00-00 00:00:00
Document Title	User manual

A B B Y Y.c
to
bu
rm
he
re
lic
lic
w.
om
F T ra n sf o
ABB
PD
he
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
User’s Manual
IMT-10 PLUS (2016/Oct../20)
w.
A B B Y Y.c
om
Y
F T ra n sf o
rm
he
re
to
bu
ABB
PD
lic
to
he
re
lic
A B B Y Y.c
3.0
w.
Copyright
om
This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all w w
.A B B Y Y.c o
rights reserved.
Neither this manual, nor any of the material contained herein, may be reproduced without the express written consent of the
manufacturer.
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Disclaimer: The manufacturer makes no representations or warranties with respect to the contents hereof and specifically
disclaim any implied warranties of merchantability or fitness for any particular purpose. The manufacturer is not liable for
technical and editorial error for this guide. The manufacturer reserves the right to revise or make changes to this publication
without notice or obligation of the manufacturer to notify any person of such revision or changes.
Software Licenses
The software included with the product and referenced in this document is furnished under a License Agreement. This
Agreement specifies permitted and prohibited uses of this product.
General Guidelines
Read all of the instructions carefully.
Save the instructions for future use.
To ensure follow all warnings and instructions marked in the product documentation and within the computer.
Except as explained elsewhere in this manual, do not attempt to service the computer yourself. Opening or removing
covers might expose you to dangerous voltage points or other risks. Refer all servicing of marked components to qualified
personnel.
A B B Y Y.c
rm
re
to
bu
ABB
F T ra n sf o
he
lic
to
re
he
lic
Power Cord Requirements
w.
PD
om
The power cord you received with this computer conforms to local specifications for use in the country where you purchased w w .
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
it. Power cord use in other countries may require an additional adapter and/or separate power cord. For additional information
on local power requirements, contact an authorized dealer, reseller, or service provider.
About the AC Adapter
The AC adapter will automatically recognize any compatible power supply connected to the computer. The AC adapter can
also be used to recharge the battery, which begins immediately after the AC Adapter cord is connected. A green LED will light
to confirm charging is in progress. The ideal range for safe operation of the computer is from 100 ~ 240V AC.
1. AC Power Cord / 2. AC Adapter / 3. DC (Direct Current) Cord
Warning :
Using the AC adapter to power other devices can damage the adapter or the device. This AC adapter is only designed for use
with the product.
Be sure to only use the AC adapter that comes provided with this product or a compatible option from the manufacturer. Other
adapters may cause damage to the computer and will not be covered under the warranty.
Grasp the adapter plug and not the cord, when unplugging the adapter from an electrical outlet.
If the power cord becomes damaged (exposed or frayed, etc.), replace with a new AC adapter. Using a damaged cord may
cause an electrical shock and may result in fire.
Power off and unplug the AC adapter from the computer before unplugging it from the electrical outlet.
A B B Y Y.c
om
w.
A B B Y Y.c
om
F T ra n sf o
rm
re
to
bu
ABB
NOTE: Refer to following hazard statement within the service and operating documentation or on the adjacent label
to the battery.
1. English
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
INSTALLED. REPLACE ONLY WITH SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER. DISCARD OF USED
BATTERIES IN ACCORDANCE WITH THE MANUFACTURER'S
INSTRUCTIONS.
2. French
IL Y A DANGER D'EXPLOSION S'IL Y A REMPLACEMENT
INCORRECT DE LA BATTERIE. REMPLACER UNIQUEMENT AVEC
UNE BATTERIE DU MÊME TYPE OU D'UN TYPE RECOMMANDÉ
PAR LE CONSTRUCTEUR. METTER AU RÉBUT LES BATTERIES
USAGÉES
CONFORMÉMENT
AUX
INSTRUCTIONS
DU
FABRICANT.
3. German
VORSICHT ! Explisionsgefahr bei unsachgemäßen Austausch der
Batterie.
Ersatz nur durch denselben oder einem vom Hersteller empfohlenem
ähnlichen Typ.
Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
4. Swedish
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalent typ som rekommenderas
av apparattillverkaren. Kassera använt batteri enligt fabrikantens
instruktion.
5. Danish
Lithiumbatteri- Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kum ske med batteri af samme fabrikat og type.
Lever det brugte batteri tilbage til leverandoren.
6. Norwegian
Ekspolsjonsafe ved feilaktig skifte av batteri.
Benytt samme batteritype eller en tilsvarende type anbefalt av
apparatfabriknten.
Brukte batterier kasseres I henhold til fabrikantens instruksjoner.
7. Finnish
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainostaan laitevalmistajan suosittelemaan tyyppiin.
Hävitä käyteet paristo valmistajan ohjeiden mukaisesti.
he
lic
PD
to
re
he
Battery (Lithium-Ion)
lic
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
w.
A B B Y Y.c
om
w.
A B B Y Y.c
PD
F T ra n sf o
rm
re
to
bu
ABB
he
lic
to
re
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC w
om
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. w . A B B Y Y . c
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instructions, may case harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which to receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
lic
he
FCC Statement
om
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Use of shielded cord is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any
changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should
be made, you could be required to stop operation of the equipment.
FCC Caution:
1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired operation.
2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
3. FCC RF Radiation Exposure Statement
This device has been tested for compliance with FCC RF Exposure (SAR) limits. The equipment complies with FCC RF
radiation exposure limits set forth for an uncontrolled environment.
4. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user
authority to operate the equipment.
CE Statement
This equipment has been designed to comply with EMC directive 89/336/EEC
And Decision 768/2008/EC
As an amended by 92/31/EEC and the Low Voltage directive 2006/95/EC,
This equipment has been comply with EMC directive 2011/65/EU And Decision 768/2008/EC
Manufacturers will need to test and approve the product to these directives.
Y
bu
to
re
he
lic
BEFORE USING YOUR COMPUTER .................................................. 1
Product Features .......................................................................... 2
Installation Guidelines ................................................................... 4
CHAPTER 1...............................................................................6
GETTING STARTED ....................................................................... 6
Unpacking the Product.................................................................. 7
Packing List .................................................................................. 7
Power Supply ............................................................................... 8
Using the Battery ...................................................................................... 8
To install and remove the Battery Pack ................................................... 9
Installing the Battery/ Remove / Replacing the Battery ........................... 9
Caring for the Battery……………………………………………………… 10
Using the AC adapter…………………………………………………..… .10
CHAPTER 2............................................................................. 12
SYSTEM OVERVIEW .................................................................... 12
Front View of the Computer......................................................... 13
Right Side View of the Computer ................................................. 15
Left Side View of the Computer ................................................... 16
Top View of the Computer .......................................................... 17
Bottom View of the Computer ...................................................... 17
Rear View of the Computer ......................................................... 18
CHAPTER 3............................................................................. 20
PROTECTING AND MAINTAINING ................................................... 20
Caring for Your Computer ........................................................... 21
Routine Care ........................................................................................... 21
Caring for the Battery ............................................................................. 21
Caring for the AC Adapter ...................................................................... 22
Caring for the Touch Screen Display ..................................................... 22
CHAPTER 4............................................................................. 23
SPECIFICATIONS & SOFTWARE ..................................................... 23
Specifications and Standard Features......................................... 23
Software ..................................................................................... 27
Using The Front Panel Hot Key Utility ..................................................... 27
rm
ABB
Table of Contents
om
F T ra n sf o
to
re
he
lic
A B B Y Y.c
PD
3.0
w.
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Before Using Your Computer
Congratulations on your purchase of the product.
You will soon be in command of the worlds most lightweight,
efficient and secure solution for managing all of your
technology and mission critical data. Scale the computer and
streamline the costs of day-to-day business operations and
multimedia demands. Discover the computer’s unparalleled
in-the-field versatility for efficiently and reliably coordinating a
myriad of tasks without costing a fortune.
Chapter Preview:
Product Features
Installation Guidelines
Preview
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
The Instructions Manual
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Product Features
The product is a portable multimedia device empowering highly mobile users
with wireless computing capabilities for day-to-day business and wireless
applications. Its light weight and supreme portability combined with
state-of-the-art
multimedia
capabilities
provide
exceptional
writing,
maneuvering, and on your feet computing. The product’s primary features
include:
Processor and OS (Operating System):
MT8382 Quad core 1.3G Android 4.4 O.S. a stable platform, providing
exceptional performance for highly mobile users under extreme and
variable conditions.
Multimedia LCD Display: TFT LCD 10.1”-inch TFT 1280x800 (XGA) LCD
with Touch Screen Control Panel (Capacitive type/LED back light / Sunlight
readable) and Smart Panel Application enhancing user’s ability to view
data outdoors and under moving conditions.
Complete Connectivity from Anywhere: The computer’s built-in Bluetooth
®
4.0 , IEEE 802.11 b+g+n WLAN and 3.5G Module offers the mobile user
the maximum opportunities to stay connected from anywhere, ensuring
uninterrupted data sharing and synchronization. Limitless instant accesses
to business critical information.
Integrated Ports and Adaptability: Multiple I/O ports (1 x USB 2.0)
Ethernet ,RS-232 Port, SD card ,Sim card) provide optimum versatility
for any industrial or Business needs. Its ultra light weight and integrated
wireless capability enable an effective mobile office. Multiple carrying
options provide quick on-the-fly versatility while executing daily tasks
comfortably and efficiently.
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
Before Using Your Computer w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Special Integrated Functions: Multiple special devices, 2M / 5M Pixel both
sides Camera, can provide useful functions for business and industrial
area.
Enhanced Protective Equipment
The computer, designed for IP65 ingress protection rating, can provide
indoor and outdoor protections of no ingress of dust and water jets against
enclosure without harmful effects. Furthermore, the computer is equipped
with 4 corner buffers to avoid drop-shock damages.
Note: Read the following Instructions Manual carefully before unpacking
and setting it up. Refer to the Instructions Manual if you encounter any
problems. Keep this Instructions Manual on hand for your reference.
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
The Instructions Manual
om
lic
he
lic
w.
Installation Guidelines
Read the following before assembling or disassembling the computer:
1. Follow all warnings and instructions marked on the product and within the
Manual.
2. Before you begin cleaning the computer, make sure that you have
unplugged all power cords and the device is Powered Off. Use a damp
cloth for cleaning. Do not use liquids of any kind of aerosol cleaners.
3. Never place the computer on an unstable surface; it may fall, causing
serious damage to it.
4. Avoid using a telephone (other than a cordless type) with the computer
during an electrical storm. There may be remote risk of electric shock from
lightning.
5. To ensure optimum performance and to protect the computer from
overheating, ventilation slots must not be covered or obstructed in any way.
The computer should never be placed near a radiator, heat register or in a
built-in cabinet unless adequate ventilation is provided.
6. The computer should only be operated using the specified power indicated
on the Warning Label located on the battery. If you are unsure of the type of
power available to your locale, consult a dealer or the local power
company.
7. If using an extension cord with the computer, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also note that the total rating of
all the devices plugged into the circuit does not exceed the fuse rating.
8. Never force objects of any kind into the computer’s ventilation or housing
slots as they may contact dangerous voltage points or spark resulting in
electrical shock or a fire. Keep all liquids of any kind away from the
computer.
9. Always disconnect all telephone lines & all power cords from the wall outlet
before servicing or disassembling this product. Refer to the dealer or a
qualified technician under the following conditions:
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
Before Using Your Computer w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the computer has been exposed to rain or water.
d. If the computer does not operate normally when the operating
instructions are followed. Adjust only those controls that are specified in
the Operating Instructions or improper adjustment may require
calibration again from a qualified technician.
e. If the computer has been dropped or the housing has been damaged.
f. If the computer experiences a distinct change in performance, indicating
a need for service.
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
CHAPTER 1
Getting Started
Chapter Preview:
Unpacking and setting up the Product
Packing list
Power Supply
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 1 - Getting Started w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Unpacking the Product
Before unpacking the product, prepare a suitable workspace for your
computer. Make sure the workspace is level, stable and near an electrical
outlet.
1. Open the box and remove the contents preserving the integrity of the box
as you may need it and all of the packing materials for future shipping.
2. Inspect the contents for damage. If you find any irregularities or anything
appears to be missing, contact your Dealer immediately. Check that the
following components are included in the box:
Packing List
1.
The Computer Unit
2.
AC Power Adapter
3.
Power core
4.
Battery
5.
Belt
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
The Instructions Manual
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Power Supply
The computer can be powered using either the built in battery or the AC
Power Adapter plugged into any grounded AC power outlet.
Using the Battery
The primary source of power for the computer is a Lithium-Ion battery pack.
The battery pack will first need to be installed on the backside of the computer.
After following the battery installation instructions below, plug the AC adapter
into any electrical outlet and the computer will begin recharging immediately.
In the future, you should not have to access the battery pack unless you wish
to replace it with a fresh one.
Note:
1. The Battery LED lights green when charging and will turn off when the
battery is fully charged.
2. When charging the first time, it is recommended that the battery be
allowed to charge for no less than eight hours.
3. It will take a longer time to complete the charging process, if the user is
using the computer at the same time.
4. Charging temperature range is regulated between-10
and 40 . Do
not charging the battery out of recommended temperature range.
5. Do not discharging battery below 10 % level, It is recommended
charging the battery within 3 months,
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 1 - Getting Started w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
To install and remove the battery pack:
Using the Power Switch to power down the computer.
Power Indicator
Battery Latch
Battery Latch
Battery Zero
Battery One
Power Indicator switch
Installing the Battery
Turn the latch to open position then removed the cover and gently put
the batteries into the battery bay. Then, turn the latch
to close
position.
Removing/Replacing the Battery
Turn the latch to open position then removed the cover and gently
take out the batteries from the battery bay. Then, turn the latch to
close position.
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
The Instructions Manual
om
lic
he
lic
w.
Battery Power Indicator
1.
Pressing the power indicator switch to display the value of the
battery. The battery value will showing on the LED board , Each
one LED represent a 20 % value.
2.
The value of the battery pack is showing on the right up corner of
the screen. 1XX% represent the “ battery one “ , XX% represent
the “ battery zero”.
Caring for the Battery
Do not heat, tamper or place the battery in water or near a fire.
Do not subject the battery to unusual forces such as hitting it,
stepping on it or dropping it.
Do not attempt to open or service the battery pack.
Only replace the battery with the same model or one of compatible
design.
Using the AC Adapter
When connecting the computer to external power:
1. Plug the DC power cord into the DC jack on the computer.
2. Plug the 3-prong AC power adapter cord into a grounded electrical
outlet.
3. Use the AC adapter to power the computer or recharge the battery
when it is low.
10
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 1 - Getting Started w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Caring for the AC Adapter
Be sure to only use the AC adapter that comes provided with this
product or a compatible option from the manufacturer. Other
adapters may cause damage to the computer and will not be covered
under the warranty.
Grasp the adapter plug and not the cord, when unplugging the
adapter from an electrical outlet.
If the power cord becomes damaged (exposed or frayed, etc.),
replace with a new AC adapter. Using a damaged cord may cause an
electrical shock and may result in fire.
Power off and unplug the AC adapter from the computer before
unplugging it from the electrical outlet.
11
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
CHAPTER 2
System Overview
This chapter contains six illustrations, highlighting each
external component and its respective functions.
Chapter Preview:
Front view of the Computer
Right side view of the Computer
Left side view of the Computer
Top view of the Computer
Bottom view of the Computer
Rear view and Build In Back Stand
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 2 – System Overview w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
w.
A B B Y Y.c
Front View of the Computer
Light Sensor
Microphone
Front CCD
Power button
Trigger Key
10.1” Panel
Hot key1
Hot key2
Hot key3
Hot key4
Status LED
Rubber Corner
10.1” inch TFT (1280x800) LCD Display with Touch Screen
Control Panel:
Data can be entered the computer module using the Finger or a
soft/USB/wireless keyboard. A soft keyboard can be located by tapping
the keyboard icon in the bottom right on the desktop. Data can also be
entered via a USB keyboard plugged into the USB port on the right side of
the computer. The computer’s USB ports support most USB keyboards
and pointing devices.
13
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
The Instructions Manual
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Microphone:
Effortless input of monaural sound recording.
Light Sensor
The brightness of the screen changes with the brightness of the
environment.
Front CCD (Option)
Provide a front photography functionality .
Power Button:
The computer Turn On / Off ( pressing button for 2 Seconds), The LED
will keep lighting for 32 seconds then off, when the computer Turn Off
Trigger Key
The key provide a trigger functionality for the bar code scanner.
Hot Key
These 4 quick access buttons are used for navigating applications in the
Android .
Status LEDs:
LED Indicator
Relevant
Component
Description
Orange (Flashing)
Hard Drive
Disk Accessing
Green (Off)
Battery
Battery Available
Green (Solid)
Battery
Battery Charging
Blue (Solid)
Power
System Powered On
Rubber Corner
The Rubber Corner provides a protection of falling down and
related damages.
14
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 2 – System Overview w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Right Side View of the Computer
DC In
USB
RS-232
DC-in Jack:
Plug the DC (Direct Current) end of the AC Adapter into this jack for
external power and battery recharging. Before plugging in the power cord,
you must first verify that the external power voltage is appropriate for your
geographical area.
USB 2.0 Ports:
Permits hot plugging of USB peripheral devices to the computer. The
USB ports support most USB mouse and keyboard devices.
RS-232 Port:
Offer an interface connecter of RS-232 that extended application of
instruments for industrial use.
15
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
The Instructions Manual
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Left Side View of the Computer
Network
Jack(RJ45)
Micro SD
Phone Jack
HDMI
Network Jack (RJ45):
Interfaces with an Ethernet 10/100/1000 Mbps Base-T network
connection.
Micro SD
Micro Secure Digital (SD) Card Slot
HDMI :
The High Definition Pictures can be transmitted to display from computer
with the HDMI cable.
Strap Hook:
The user can grasp the machine by using the hand strip,
16
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 2 – System Overview w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Top View of the Computer
Bar code Scanner
M.S.R
M.S.R (Option)
Mini Smartcard Reader Reserved seat.
Bar code Scanner (Option)
Bar code Scanner Reserved seat.
Bottom View of the Computer
Docking Port
Docking Port
The extended multi-function included: the battery charger port, the USB
ports supporting most USB mouse and keyboard devices, RJ-45 Internet
port, RS-232 port, DC-In Jack, Microphone and Headphone.
17
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
The Instructions Manual
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Rear View of the Computer
MMCX Connector
Rear CCD
Stylus
Battery Indicator
Cover Latch
Battery Cover
Battery Indicator Switch
Speaker
Kensington lock
GPS:
Support 20-channel GP
Internal Speakers:
The computer’s built-in a single speaker support audio applications for all
media software. Volume and equalizer control can be adjusted via the OS
or additional multimedia application software. Sound will mute when
headphones are detected.
18
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 2 – System Overview w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Battery Pack:
A 3-cell 3400mAh removable Lithium-Ion battery pack comes standard
with the computer. Each cell comes equipped with short circuit,
over-charge, over-discharge, over-current and abuses protection.
Hand Strip:
To adjust the strip length for your convenience use.
SIM Card:
Please remove the cover of the battery pack
And remove the battery pack
Please insert the SIM Card to the slot
19
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
CHAPTER 3
Protecting & Maintaining
Chapter Preview:
Caring for your Computer
Configuring DRAM, and SIM Card
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 3 – Protecting & Maintaining w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Caring for Your Computer
To guarantee a long life for the computer and to ensure it functions optimally,
pay particular attention to the following recommended maintenance
guidelines.
Routine Care
Follow these guidelines to keep the computer working properly:
Do not attempt to disassemble or modify the computer in any way.
Do not place anything on top of the device or its LCD display to prevent
damage to the screen.
Avoid using and storing the computer in locations where static or electrical
interference can damage in the internal components.
Avoid using and storing the computer in locations exposed to extreme
temperature fluctuations, likely condensation, or direct sunlight.
Keep the device away from moisture such as exposure to liquids or
precipitation.
Only operate the device with the battery pack installed, even when using
external power. This ensures the computer will have the sufficient power to
maintain and save data when disconnected from the external power
source.
Store the device in its docking station when not in use.
Caring for the Battery
Do not heat, tamper or place the battery in water or near a fire.
Do not subject the battery to unusual forces such as hitting it, stepping on it or
dropping it.
Do not attempt to open or service the battery pack.
Only replace the battery with the same model or one of compatible design.
21
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
The Instructions Manual
om
lic
he
lic
w.
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Caring for the AC Adapter
Be sure to only use the AC adapter that comes provided with this product or a
compatible option from the manufacturer. Other adapters may cause
damage to the computer and will not be covered under the warranty.
Grasp the adapter plug and not the cord, when unplugging the adapter from
an electrical outlet.
If the power cord becomes damaged (exposed or frayed, etc.), replace with a
new AC adapter. Using a damaged cord may cause an electrical shock and
may result in fire.
Power off and unplug the AC adapter from the computer before unplugging it
from the electrical outlet.
Caring for the Touch Screen Display
Never spray liquids of any kind directly onto the display screen or allow excess
liquid to drip into the device.
Never place anything on the display screen that could cause damage to the
LCD display, for example, drinks and food.
Never scratch the surface of the LCD display with any sharp or damaging
objects.
Avoid exposing the computer to direct sunlight or excessive ultraviolet
radiation for an extended period of time.
To clean the exterior of the device, wipe the screen and the housing with a soft,
damp cloth moistened with water. Never use soap or other cleaning
products on the LCD screen. It may discolor the outer coating and damage
Screen visibility
22
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
CHAPTER 4
Specifications & Software
Chapter Preview:
Specifications and Standard Features
Software
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
Specifications and Standard Features
Processor
MT8382 Quad core 1.3G hz
Operating System
Android 4.4
Memory
LPDDRII 1GB
Display
10.1”-inch TFT (1280x800) LCD Touch Panel( Capacitive Type)
LED Back Light / Sunlight Readable
Pointing Device
Touch Panel Screen and Stylus Pen Input Device
Storage
eMMC 8GB
Wireless Connectivity
Wireless LAN : IEEE 802.11 b+g+n
®
Bluetooth 4.0
3.5G Module
WCDMA (2100 MHz), (1900 MHz),(850 MHz), (800 MHz)
GSM 850 MHz, E-GSM 900 MHz, DCS 1800 MHz, PCS 1900 MHz
HSUPA category 6, up to 5.76 Mb/s UL
HSDPA category 14 up to 21.1 Mb/s DL for LISA-U230
WCDMA PS data up to 384 kb/s DL/UL
Communication
10/100/1000 Mbps Base-T Ethernet LAN
24
The Instructions Manual
om
lic
he
lic
w.
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 4 – Specifications & Software w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
GPS (optional)
Support 20-channel GPS
Multimedia
Internal microphone and single speakers
External volume on/off controls via hot key setting
Battery
External two cell 3400mAh Removable Lithium-Ion Battery Pack. Short
circuit, over-charge, over-discharge, over-current and abuses protected.
Power Supply
External AC Adapter (175g / AC Input 100~240V, 50/60Hz, 3 Pin Inlet / DC
Output 16V, 4.0 A, DIM:107.7mm x 45.9 mm x 30 mm ) includes Power
Cord.
Included Accessories
Hand strip, power cord, adapter and belt.
Interface
1x USB 2.0 Ports
Micro SD Card Port
RS-232 Port
Ethernet (RJ45)
Microphone Build-in
Speaker
Light Sensor
Docking Port
DC Power In
LED Status Indicators :
HDD LED
(Orange)
Battery LED (Green)
Power LED
(Blue)
Flashing
Off
Solid
Solid
–
–
–
–
Disk Accessing
Battery Available
Battery Charging
System Powered On
25
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
The Instructions Manual
lic
w.
om
Mobility
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Dimensions: 305.80mm x 246.43mm x 39.95mm
Warranty:
ONE year limited warranty parts.
Docking
USB 2.0 x 4
RJ-45
RS-232
DC-IN
Micro Phone
Headphone
VGA Port
Environmental Specifications
Operating temperature : -10° to 40°C (14° to 104°F)
Storage temperature
: -20° to 75°C (-4° to 167°F)
Certification of System
26
FCC ID / CE / EN060950-1 IP65 Energy Star
w.
A B B Y Y.c
om
Y
F T ra n sf o
A B B Y Y.c
bu
to
re
he
lic
he
lic
CHAPTER 4 – Specifications & Software w
w.
om
rm
ABB
PD
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
ABB
PD
er
Software
Using The Front Panel Hot Key Utility
Please refer to the following descriptions for each of all 5 hot keys.
Barcode Trigger
Home Screen
Back to previous page
Volume UP
Key T :
Volume Down
A dedicated button to Trigger Barcode Scanner.
And Volume Down control.
Key 1:
The Key was entered will back to home screen .
Key 2:
The Key was entered will back to previous page.
Key 3:
The defaulted key function increase Audio Volume.
Key 4:
The defaulted key function decrease Audio Volume.
27
w.
A B B Y Y.c
om
A B B Y Y.c
to
bu
rm
he
re
The Instructions Manual
om
lic
lic
w.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless Tablet PC is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency (RF)
energy set by the Federal Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that were
developed by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health. The exposure
standard for wireless mobile Tablet PCs employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests
for SAR are conducted with the Tablet PC transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the Tablet PC while operating can be
well below the maximum value. This is
government adopted requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body) as required by the FCC
for each model. The highest SAR value for this model Tablet PC when worn on the
28
F T ra n sf o
ABB
PD
he
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
A BB
PD
er
w.
A B B Y Y.c
om
A B B Y Y.c
to
bu
rm
he
re
lic
lic
w.
om
CHAPTER 4 – Specifications & Software w
F T ra n sf o
ABB
PD
he
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
A BB
PD
er
body, as described in this user guide, is 1.4 3 0 W/Kg (Body-worn measurements
differ among Tablet PC models, depending upon available accessories and FCC
requirements). While there may be differences between the SAR levels of various
Tablet PCs and at various positions, they all meet the government requirement for safe
exposure. The FCC has granted an Equipment Authorization for this model Tablet PC
with all reported SAR levels evaluated as in compliance with the FCC RFexposure
guidelines. SAR information on this model Tablet PC is on file with the FCC and can
be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after
searching on
FCC ID:XZO-IMT-10PLUS Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular Telecommunications Industry Asso-ciation
(CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the
SAR limit for mobile Tablet PCs used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a sub-stantial margin of safety to
give additional protection for the public and to account for any variations in
measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be maintained
between the user’s body and the handset, including the antenna. Third-party belt-clips,
holsters, and similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements may not
comply with RF exposure requirements and should be avoided. Use only the supplied
or an approved antenna.
29
w.
A B B Y Y.c
om
A B B Y Y.c
to
bu
rm
he
re
The Instructions Manual
om
lic
lic
w.
CAUTION
1.Use careful with the earphone maybe possible excessive sound
pressure from earphones and headphones can cause hearing loss
2. CAUTION : RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS
3. The product shall only be connected to a USB interface of
version USB2.0
4. Adapter shall be installed near the equipment and shall be
easily accessible
5. Operation temperature:-10 ºC~40 ºC
6. The plug considered as disconnect device of adapter
7.The device complies with RF specifications when the device
used at 5mm form your body
8. AC adapter:
Model No.: ATS065S-P160
Input: AC 100-240V 50-60Hz 1.4A
Output: DC 16V,4.07A
30
F T ra n sf o
ABB
PD
he
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
A BB
PD
er
w.
A B B Y Y.c
om
A B B Y Y.c
to
bu
rm
he
re
lic
lic
w.
CHAPTER 4 – Specifications & Software w
om
F T ra n sf o
ABB
PD
he
re
to
3.0
3.0
bu
rm
er
F T ra n sf o
A BB
PD
er
i-Mobile Technology Corporation hereby declares that
this Tablet PC is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
This information has to be presented in such a way that the user
can readily understand it. Typically, this will necessitate
translation into every local language (required by national
consumer laws) of the markets where the equipment is intended
to be sold. Illustrations, pictograms and using international
abbreviations for country names may help reduce the need for
translation.
31
w.
A B B Y Y.c
om

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Producer                        : PDF-XChange 4.0.163.0 [ABBYY] (Windows Seven Ultimate Professional Service Pack 1 (Build 7601))
Create Date                     : 2016:12:15 13:48:05+08:00
Page Count                      : 37

EXIF Metadata provided by EXIF.tools