i Tech Dynamic C51-B305-XX i.Tech i.Car Kit 305 User Manual EN

i.Tech Dynamic Limited i.Tech i.Car Kit 305 EN

User Manual

Dispose of the packaging and this product in accordance with the latest provisions. 2009 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned, and product I.D. shown may be modified, supplemented or withdrawn without further notice. The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises Limited or its affiliates. All other trademarks or registered trademarks belong to their respective owners.02/2009♦ Charging indication will be delayed for a few seconds if the carkit has not been used for a long time or the battery is drained.♦ 4 hours are required to fully charge the carkit.TroubleshootingI can hear crackling noise.To receive the best audio quality, it is recommended to place your phone closer to the carkit.I can't hear anything in my carkit.• Ensure the carkit is turned on and is properly charged.• Ensure the carkit is properly paired with the mobile phone.• Make sure that the mobile phone is connected with the carkit – if it does not connect, either refer to the mobile phone's Bluetooth menu or by pressing the MFB once (see “Using Your Carkit” and “Pairing Your Carkit with a Bluetooth Mobile Phone”).I can't connect my carkit with mobile phone.• Ensure your carkit is turned off and is properly charged.• Ensure the carkit is properly paired with your mobile phone.Troubleshooting (cont'd)• Ensure your mobile phone’s Bluetooth feature is activated. Please refer to your mobile phone user guide for specific instruction.• Ensure the carkit is within ten metres range of your mobile phone and there are no obstructions, such as walls or other electronic devices in between.If the above steps do not solve your problem, please recharge the carkit and remove your mobile phone’s battery for a while.I can’t turn off the carkit or the carkit does not response• You may do a “hardware reset” on your carkit if you can’t turn it off or it doesn’t response.• Plug the charging cable to the carkit and then press and hold the volume key and MFB button.• Release the both buttons and the status indicator will stay red again and the carkit is reset.• If you do not plan to use the carkit for a long period, please store it in a dry place that is free from extreme temperatures and dust.• Use only the charger supplied by the carkit’s original manufacturer to charge the carkit. Other chargers may look similar but using them could be dangerous and could damage the carkit.Care and Maintenance (cont’d)• Turn off your carkit before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile phone may place an unintended call.• Dispose of the battery and the carkit according to local regulations. Do not dispose of them as household waste.• Do not bring the carkit into contact with any sharp objects as this will cause scratches and damages.• Do not attempt to disassemble the carkit as it does not contain serviceable components.Care and MaintenanceThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.FCC RF Radiation Exposure Statement:Safety Information • Check and observe local laws regarding the use of a mobile phone and a carkit while driving. If you use the carkit while driving, ensure your full attention and focus. It is your responsibility to drive safely. Consider to pull off the road before making or answering a call.• Never leave your carkit above any air bag deployment area inside your car as serious injury may result when an air bag deploys.• Never allow children to play with the carkit – small parts may be of choking hazard.• Do not expose the carkit to liquid, moisture or humidity, or rain as it is not waterproof.• Do not keep the carkit near a wash basin or other wet places.• Do not leave the carkit in direct sunlight for an extended period of time.• Do not expose the carkit to extremely high or low temperatures. Safety Information (cont'd) • Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.• Do not clean the carkit while it is being charged. Always disconnect the charger from the carkit before cleaning.• Avoid charging the carkit in extremely high or low temperatures.• Do not attempt to force open the built-in battery. • Only charge the carkit’s built-in battery in accordance with the instructions described in this user guide.Declaration of ConformityWe, i.Tech Dynamic Limited, declare that the following product: Product Name: i.Tech i.Carkit 305Model No.: C51-B305-XX is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive.A copy of the Declaration of Conformity can be found at http://www.itechdynamic.com.Notes on Environmental Protection After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices must not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collection points that are set up for this purpose or designated points of sale. However, such details are defined by the national law of the respective country. This symbol on the product, the instruction manual or the packaging indicates that the product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices, you are making an important contribution in protecting our environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.15.21You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to Federal Communications Commission (FCC) StatementGetting StartedTo use your i.Carkit 305 Bluetooth carkit (“carkit”), please follow the steps below:1. Ensure your carkit is fully charged.2. Pair your charged carkit with a Bluetooth-enabled mobile phone.Charging Your CarkitThe carkit comes with a built-in rechargeable battery. Prior to using the carkit for the first time, it is recommended to fully charge the battery.1) Insert the car charger into the car cigarette socket2) Plug the USB charging cable into the car charger USB slot3) Connect the USB charging cable into the carkit charging socket as shown in the figure. 4566-789-1010-1111-151617-1819-2021-2222Product Specificationsi.Carkit 305 OverviewGetting StartedCharging Your CarkitInstalling Your CarkitIndicator LightPairing Your Carkit with a Mobile PhoneUsing Your CarkitResetting Your Carkit / Removing the Pairing HistoryTroubleshootingSafety InformationCare and MaintenanceDeclaration of ConformityContents Product SpecificationsBluetooth Specification: v2.1 + EDR Class 2Bluetooth Profiles Supported: Headset and HandsfreeSpeaker Power: 1.5 wattsRange of Frequency: 2.4GHz spectrumNominal Charging Time: Within 4 hoursTalk Time*: Up to 8 hoursStandby Time*: Up to 800 hoursDimensions: 79 (L) x 38 (W) x 12 (H) mmDimensions: 3.11’’ (L) x 1.50’’ (W) x 0.47’’ (T) inchWeight: 90 grams / 3.17oz * may vary due to the user’s habit, different modes of operation, and mobile phone settings.Indicator Light Indicator LightCarkit Status Status Indicator Light (fig.1)• Charging (OFF MODE)• Fully charged (OFF MODE)• Low battery• Out of battery• Charging (STANDBY MODE)• Fully charged (STANDBY MODE)• Out of Range• Solid Red• The light turns off• Flash Red and short beep every minute• The light turns off• Solid Red with Blue flash in every 8 seconds• Flash blue• Long beep, flash purple 3 times and then flash blue (repeat every 15 seconds)Talk and Standby TimeA fully charged battery can offer up to 8 hours of talk time and up to 800 hours of standby time. The carkit remains in standby mode after being turned on.Pairing Your Carkit with a Bluetooth Mobile Phone1) Ensure the carkit is off.2) To activate the pairing mode, press and hold the carkit’s MFB for 8 seconds without releasing your finger until its status indicator flashes blue and red light alternately.3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “i.Carkit 305” and enter the passcode “0000”. When the pairing is completed, the carkit’s status indicator will flash blue light rapidly five times.Pairing Your Carkit with a Bluetooth Mobile PhoneIf the pairing cannot be completed within 3 minutes after the pairing mode has been activated, the carkit’s status indicator will flash purple rapidly 5 times and then turns to standby mode. Repeat steps 1 to 3 to pair both devices again.When you turn on your carkit for the first time, the carkit proceeds into pairing mode automatically, i.e. the status indicator flashes blue and red alternately, so that you can immediately pair it with your mobile phone.Using your CarkitFunction Button Audio Status IndicatorPower ON Short beep Flash blue light 3 timesUsing your CarkitFunction Button Audio Status IndicatorPower OFF Press and hold the MFB for 2 seconds Ringer tonePress the End Button oncePress the Volume UP/DOWN button once to increase / decrease by 1 level (Total 6 levels)Short beep at max. volumeIncoming callEnd a call Adjust VolumeVoice Dialing* Press the MFB onceRed light for two seconds and then the light goes offFast blinking purple lightFlashing blue lightPress the MFB button onceAnswer a call Flashing blue lightFlashing blue lightFlashing blue lightLong beepShort beepSay the voice tag as soon as you hear the short beep and you must have recorded the voice tag into your mobile phone.Using your CarkitFunction Button Audio Status IndicatorLast no. Redial* Double click the MFBPress End Call button onceWhile speaking, press and hold the volume Key for 2 secondsWhile speaking, press MFB onceReject a call*Call Transfer (carkit to mobile phone)*Call Transfer (mobile phone to carkit)*Flashing blue lightFlashing blue light Flashing blue lightFlashing blue lightWhile speaking, press MUTE button onceCall muting (Mic ON/OFF)Blue on and turn off every 8 secondsShort beepShort beepWhile speaking, press MUTE button onceCall muting while charging (Mic ON/OFF)*Multipoint function allows you to pair with two mobile phones simultaneously. When either phone rings, you may pick the call by pressing the MFB. To pair the phones:1. Pair your headset with the 1st mobile phone as normal2. Turn the carkit off and repeat the pairing procedure for the 2nd mobile phone3. Reconnect the 1st mobile phone with the headsetWhen there is an incoming call from another phone, you can pick the 2nd call by pressing the Call button on the phonePurple on and turn off every 8 seconds* Subject to mobile support Short beepShort beepFactory ResetYou may reset the carkit to its default settings. Resetting will also remove the pairing history of your carkit with the mobile phone.1. Ensure the carkit is turned OFF.Hold the volume key and plug charging cable into the charging socket. The status indicator will alternately flash Red and Blue for 3 times.2. Release the volume key.3. The status indicator will stay red again and the carkit is reset.i.Tech Bluetooth carkit is designed to work with Bluetooth devices. Due to large variability between different Bluetooth devices from different manufacturers, interoperability between the carkit and all Bluetooth-enabled products is not guaranteed.provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Federal Communications Commission (FCC) StatementBluetooth Carkiti.Carkit 305 User Guide 1. Multi-function Button (MFB) • Power On / Off • Pair with mobile phone • Answer call • Last number redial • Voice dialing2. Mute Button3. Volume Up/Down Button • Adjust volume up or down • transfer a call4. Status Indicator5. End/Reject Call Button6. Speaker7. Microphone8. Charging Socket9. 3.5mm Line Out Socket10. Detachable Visor Clipi.Carkit 305 OverviewUse only the supplied charger / USB charging cable to charge the carkit.Charge Plug Charging SocketCharging Your Carkit4567To install your carkit, you should first slide the metal visor clip onto the carkit, and then secure the carkit to the sun visor in your car as shown. You may slide the clip onto the carkit in both directions for different driving conditions.8Installing Your Carkit910 11 1213Using your CarkitFunction Button Audio Status Indicator14Using your CarkitFunction Button Audio Status Indicator15 16 17 1819 20 21 22 23 2425 263-2625-4344-6263-8182-100101-121122-139140-158159-178English FrenchGerman ItanioEspanishGreekArabicRomanianBulgarianPress and hold the MFB for 2 seconds10(fig.1)(fig.2)(fig.3)513476298

Navigation menu