i Tech Dynamic C51-B602-XX i.Tech Clip Radio 602 User Manual 602 front 0731 V1

i.Tech Dynamic Limited i.Tech Clip Radio 602 602 front 0731 V1

Contents

User Manual I

Bluetooth HeadsetClip Radio 602 User Guide ContentsProduct Specifications ................................................................................................................................... 3Clip Radio 602 Overview ............................................................................................................................... 4Getting Started ................................................................................................................................................ 4Charging Your Headset ................................................................................................................................. 5-6Pairing Your Headset with a Bluetooth Mobile Phone .......................................................................... 6Using Your Headset ........................................................................................................................................ 7-8FM Radio Function .......................................................................................................................................... 9Factory Reset .................................................................................................................................................... 10Troubleshooting .............................................................................................................................................. 10-11Safety Information .......................................................................................................................................... 11-12Care and Maintenance ................................................................................................................................... 13-14Declaration of Conformity ............................................................................................................................. 14Product SpecificationsBluetooth Specification: v2.0 + EDR Class 2 Bluetooth Profiles Supported: Headset & HandsfreeRange of Frequency: 2.4GHz spectrumNominal Charging Time: Within 3 hoursFM Radio Frequency: 87.5 MHz – 108.0MHzTalk Time*: Up to 4.5 hoursStandby Time*: Up to 90 hoursDimensions: 27.1 (L) x 40.4 (W) x 11.1 (H) mm Weight: 13.1 grams* may vary due to the user’s habit, different modes of operation, and mobile phone settings.Pairing Your Headset with a Bluetooth Mobile Phone1) Ensure the headset is off.2) To activate the pairing mode, press and hold the headset’s MFB without releasing your finger until its status indicator blinks blue and red.3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “Clip Radio 602” and enter the passcode “0000”. When the pairing is completed, the headset’s status indicator will flash blue light rapidly five times.If the pairing cannot be completed within three minutes after the pairing mode has been activated, the headset’s status indicator will blink purple 5times and then turns to standby mode. Repeat steps 1 to 3 to pair the devices again.POWER ON Press and hold the MFB for 6 sec a short beep Blinking blue light 3 timesUsing your headsetFunction Button AudioWhen you turn on your headset for the first time, the headset proceeds into pairing mode, i.e. the status indicator blinks blue and red alternatively, so that you can immediately pair it with your mobile phone.Status indictor POWER OFFIncoming callAnswer a call Press the MFB oncePress and hold the MFB for 6 secondsa long beepFlashing blue lightEnd a call Press the MFB once Flashing blue lightAdjust Volume Up Press the Volume Up key once Flashing blue lightAdjust Volume Down Press the Volume Down key Flashing blue lightVoice Dialing* Press the MFB once Flashing blue lightRingtone on earphone and buzzer toneShort beep at maximumShort beep at minimuma short beepBlue light for two seconds and then the light goes offQuick flashing purple lightFM Radio FunctionFunction Button AudioAssign Preset Station - There are maximum 8 preset stations available1) Tune to a station that intended to be stored2) Hold the FM key for 2 seconds to storeStatus indictor Adjust Volume Up Press the Volume Up key oncePress the Volume Down key onceAdjust Volume DownAssign a Preset Station*Indicator LightHeadset Status• Charging (OFF MODE)• Fully charged (OFF MODE)• Low battery• Out of battery• Charging (STANDBY MODE)• Fully Charged (STANDBY MODE)• Out of Range• Long Red• The light turns off• Flash Red • The light turns off• Flash Purple and Red• Flash Blue• Flash Purple 4 times every 15 seconds until reconnection♦ Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained.♦ 3 hours are required to fully charge the headset.* Warning: Do not use the headset while it is connect to the chargerA fully charged battery can offer up to 4.5 hours of talk time and up to 90 hours of standby time. The headset remains in standby mode after being turned on.Status Indicator Light (fig.1)Use only the supplied charger / USB charging cable to charge the headset.34 5 6Indicator Light (Cont’d)Talk and Standby Time7Using your headsetFunction Button Audio Status indictor 8Say the voice tag as soon as you hear the short beep and you must have recorded the voice tag into your mobile phone.Last no. Redial* Double click the MFB Flashing blue lightFlashing blue lightReject a call* Press and hold the Volume Down key for 2 secondsa short beepFlashing blue lightCall Transfer (headset to mobile phone)*While speaking, press and hold the Volume Up key for 2 secondsFlashing blue lightCall Transfer (mobile phone to headset)*While speaking, press MFB onceFlashing blue lightKey Lock (Activate/Deactivate)Slide the Lock Key to activate/Slide to the opposite side to deactivateFlashing blue lightAnswering a Call while key lock is activatedPress the MFB once* Subject to mobile supportFM Radio ON/OFF Press FM key once to turn ON/OFF Flashing blue lightFlashing blue lightFlashing blue lightFlashing blue lightScan a Station Hold Volume UP/DOWN for 2 seconds (start scanning until a station is found)9Retrieve Preset Station – Stored station is retrieved in first store first out basis.1) Press FM key 2 times to retrieve the first stored station2) Press FM key again to retrieve the second stored station and so onClip Radio 602 Overview 1. Multi-function Button (MFB) • Power On / Off • Pair with mobile phone • Answer / End a call • Last number redials • Voice dialing2. Status Indicator3. Charging Socket4. FM Button • FM Radio On / Off • Assign FM preset station • Retrieve FM preset station5. 3.5mm Audio Socket6. Built-in Microphone7. Volume up • adjust volume up • Reject / Transfer a call • FM Radio Scan Up8. Volume Down • adjust volume down • FM Radio Scan Down9. Lock ButtonGetting StartedTo use your Clip Radio 602 Bluetooth headset (“headset”), please follow the steps below:1. Ensure your headset is fully charged.2. Pair your charged headset with a Bluetooth-enabled mobile phone.(fig.1)Charging Your HeadsetCharging Your HeadsetThe headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery.Insert the charger’s plug into the headset’s charging socket (see fig.2) and plug the mains charger to an AC wall outlet or plug to the PC/notebook.Charger PlugCharging Socket(fig.2)Factory ResetYou may reset the headset to its default settings. Resetting will also remove the pairing history of your headset with the mobile phone.1. Make sure the headset is switched off2. Hold the Volume Up key and plug the charging cable into the charger socket, the status indicator will flash purple two times.3. Release the Volume Up key4. The status indicator will stay red and the headset is reset.i.Tech Bluetooth headset is designed to work with Bluetooth devices. Due to large variability between different Bluetooth devices from different manufacturers, interoperability between the headset and all Bluetooth-enabled products is not guaranteed.TroubleshootingI can hear crackling noise.To receive the best audio quality, it is recommended to wear your headset on the same side of the body as your mobile phone.I can't hear anything in my headset.• Ensure the headset is turned on and is properly charged.• Ensure the headset is properly paired with the mobile phone.• Make sure that the mobile phone is connected with the headset – if it does not connect, either refer to the mobile phone's Bluetooth menu or by pressing the MFB once (see “Using Your Headset” and “Pairing Your Headset with a Bluetooth Mobile Phone”).Safety Information• Check and observe local laws regarding the use of a mobile phone and a headset while driving. If you use the headset while driving, ensure your full attention and focus. It is your responsibility to drive safely. Consider to pull off the road before making or answering a call.• Never leave your headset above any air bag deployment area inside your car as serious injury may result when an air bag deploys.• Never allow children to play with the headset – small parts may be of choking hazard.TroubleshootingI can't connect my headset with my mobile phone.• Ensure your headset is turned off and is properly charged.• Ensure the headset is properly paired with your mobile phone.• Ensure your mobile phone’s Bluetooth feature is activated. Please refer to your mobile phone user guide for specific instruction.• Ensure the headset is within ten metres range of your mobile phone and there are no obstructions, such as walls or other electronic devices in between.If the above steps do not solve your problem, please recharge the headset and remove your mobile phone’s battery for a while.I can’t turn off the headset or the headset does not respond• You may do a “hardware reset” on your headset if you can’t turn it off or it doesn’t respond. To “hardware reset”:1) Plug charging cable into the charging socket2) Hold the MFB and Volume Up key at the same time3) Release both keys and the status indicator will turn red againSafety Information• Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.• Turn off your headset prior to boarding an aircraft. Do not use your headset inside an aircraft.• To prevent damage to your hearing, please do not set the listening volume too high.• Do not attempt to modify the headset.• Do not keep the headset near a wash basin or other wet places.• Do not use the headset outdoors in the rain.• Do not use the headset in stormy weather.• Do not clean the headset while it is being charged. Always disconnect the charger from the headset before cleaning.• Do not attempt to force open the built-in battery. • Only charge the headset’s built-in battery in accordance with the instructions described in this user guide.FCC RF Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Care and MaintenanceHeadset• Turn off your headset before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile phone may place an unintended call.• Do not expose the headset to liquid, moisture or humidity, or rain as it is not waterproof.• Do not use abrasive cleaners to clean the headset.• Do not expose the headset to extremely high or low temperatures.• Do not leave the headset in direct sunlight for an extended period of time.• Do not leave the headset near open flames such as cooking burners.• Do not dispose of the headset in a fire, as it will result in explosion.• Do not bring the headset into contact with any sharp objects, as this will cause scratches and damages.• Do not stick anything inside the headset, as this may damage internal components.• Do not attempt to disassemble the headset as it does not contain serviceable components.• If you do not plan to use the headset for a long period, please store it in a dry place that is free from extreme temperatures and dust.• Avoid charging the headset in extremely high or low temperatures.• Dispose of the battery and the headset according to local regulations. Do not dispose of them as household waste.Built-in Battery• Do not attempt to replace the headset’s battery as it is in-built and is not changeable.• Dispose of the battery according to local regulations. Do not dispose of the battery as household waste.• Charge the battery in accordance with the instructions supplied with this user guide.Care and Maintenance (Cont’d)Charger• Use only the charger supplied by the headset’s original manufacturer to charge the headset. Other chargers may look similar but using them could be dangerous and could damage the headset.• Do not attempt to disassemble the charger as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used.• Do not use the charger outdoors or in damp areas.Declaration of ConformityWe, i.Tech Dynamic Limited, declare that the following product: Product Name: i.Tech Clip Radio 602Model No.: C51-B602-XX is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive. A copy of the Declaration of Conformity can be found at http://www.itechdynamic.com.Notes on Environmental Protection After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices must not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collection points that are set up for this purpose or designated points of sale. However, such details are defined by the national law of the respective country. This symbol on the product, the instruction manual or the packaging indicates that the product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices, you are making an important contribution in protecting our environment.Federal Communications Commission (FCC) StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.15.21You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection Federal Communications Commission (FCC) Statementagainst harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Dispose of the packaging and this product in accordance with the latest provisions.10 11 1213 14 15 16© 2009 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned, and product I.D. shown may be modified, supplemented or withdrawn without further notice.The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises Limited or its affiliates. All other trademarks or registered trademarks belong to their respective owners.Bluetooth® and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc, USA and licensed to i.Tech Dynamic Limited.i.Tech declares under our sole responsibility that the headset is in conformity with the provisions of the following Council Directives: 1999/5/EChttp://www.itechdynamic.comPrinted in China1705/20093-1718-3435-5152-6768-83To acquire better FM performance, users are recommended to use with the i.Tech stereo headphones in the box213564789

Navigation menu