iLuv Creative Technology WO289BT Jumbo Display Alarm Clock Speaker User Manual MC2 QSG 110916 D

iLuv Creative Technology Jumbo Display Alarm Clock Speaker MC2 QSG 110916 D

manual

SleepMicro USBQSGFor charging only. Does not sync.Pour recharger uniquement Ne synchronise pasNur zum auaden, nicht zum Syncronisieren.Solo para carga. No se sincroniza仅用于充电，不用于同步。TimeShaker® Boom Main Unit2. SETTING THE CLOCK / RéGLAGE DE L'HEURE / UHRZEIT EINSTELLEN / AJUSTE DE LA HORA 3. SETTING TIME / RéGLAGE DE L'HEURE / UHRZEIT EINSTELLEN / AJUSTE DE LA HORA 4. SETTING THE ALARM / RÉGLAGE DE L'HEUREAC AdapterWHAT’S INCLUDED12 / 24 HRSet up the preset stationAux-In ModeAC Adaper(Back)(Back)(Shaker Side)• For all settings, if you do not press any button for 5 ~ 10 seconds, you will be timed out. All displayed changes will be saved and will go back to the previous mode.• 2. Adjusting item(s) will flash.• Press the + or - button to adjust the time. Hold the + or - button to adjust quickly.• During the FM radio mode, press the ‘Preset’ button to play preset stations.• Press the button again to move to next preset station in cycle (Preset 1 -> 2 ... ->6).• Select Bluetooth from the source of your music. (FM radio > aux-in > Bluetooth).• Tune the radio station you want to save• Hold the ‘Bluetooth’ button to pair with a new device• Go to "Settings" and “Bluetooth” from your mobile device• Turn on Bluetooth®• When paired, the main unit will make a chime bell sound and the Bluetooth indicator will stay on.• Again to save• When the alarm goes off, press the ‘SNOOZE | DIMMER’ button to temporarily deactivate it. The snooze function will extend your alarm in increments of 9 minutes.* To adjust the display’s brightness.• To stop the alarm / To disable the alarm• Select FM radio from the source of your music. (FM radio > aux-in > Bluetooth)• Go to sleep mode. The sleep indicator will turn on. • Power Down• The Default Alarm 1 time is 6:00am.Daylight Saving Time (DST)• Press for 2 seconds and then go back to the current time.1. TO POWER ON / RéGLAGES / UM IHN EINZUSTELLEN / PARA ENCENDER 5. FM RADIO / CHARGEMENT / AUFLADEN / CARGA / 充电6. RADIO PRESET7. BLUETOOTH / AUX-IN8. SLEEP FUNCTION 9. CHARGING / BATTERY BACKUPRÉ-INITIALISATION DE L'IDENTIFIANT DU VIBREUR DE LIT / BED SHAKER ID CODE ZURÜCKSETZENREINICIAR EL CÓDIGO DE IDENTIFICACIÓN DEL AGITADOR DE CAMA / 重新设置床震器ID代码iLuv®, TimeShakerTM, and GreeNology® trademarks are the exclusive properties of jWIN Electronics Corp. and are registered with the U.S. Patent and Trademark Oce, and may be registered or pending registration in other countries. All other iLuv® trademarks, service marks, and logos may be registered or pending registration in the U.S. or in other countries. All other trademarks or registered trademarks are the property of their respective owners. © 2016 iLuv Creative Technology. Printed in China.Quick Start GuideGuide de démarrage rapideiLuvDesigned in New York, USABluetoothPMSleepAl 1RadioBuzzerAl 2QSGBackup Battery12/24 -1/+1 Time Set Aux-in PowerTime Format Daylight Saving TimeDC 5VBluetoothPMSleepAl 1RadioBuzzerAl 2BluetoothPMSleepAl 1RadioBuzzerAl 2BluetoothPMSleepAl 1RadioBuzzerAl 2BluetoothPMSleepAl 1RadioBuzzerAl 2BluetoothPMSleepAl 1RadioBuzzerAl 212/24 -1/+1 Time Set Aux-in PowerTime Format Daylight Saving TimeDC 5V(Back)12/24 -1/+1 Time Set Aux-in PowerTime Format Daylight Saving TimeDC 5V(Back) (Back)12/24 -1/+1 Time Set Aux-in PowerTime Format Daylight Saving TimeDC 5V12/24 -1/+1 Time Set Aux-in PowerTime Format Daylight Saving TimeDC 5V02• Press the ‘+’ or ‘>>’ button to increase the preset number• Press the ‘-’ or ‘<<’ button to decrease the preset number* Press the ‘<<’ or >> button to change track. Hold the ‘<<’ or ‘>>’ to rewind or fast forward within the song* Press the ‘<<’ or >> button to change track. Hold the ‘<<’ or ‘>>’ to rewind or fast forward within the song• Press the ‘<<’ or ‘>>’ button to tune the frequency.• Hold the ‘<<’ or ‘>>’ button to search down or up for next station.• If you do not press any button for 2 seconds, the display will go back to the current time.• Press the ‘+’ or ‘-‘ button to adjust the volume. • Continue to press the ‘Sleep’ button to select the number of minutes you want your music to play: 90, 60, 45, 30, 15 minutes or OFF.• To charge other devices, connect one end of the USB charging cable (not included) to the “Charge” port on the top of the main unit.• The display will change back to the current time if you do not press any button for 3 seconds.• The music will stop playing once the sleep timer has ¬finished. • To stop sleep mode before the time is out press the ‘Sleep’ button to select ‘OFF’ or press the ‘Power’ button anytime. • Press the + or - button to adjust the time. Hold the + or - button to adjust quickly.• The Radio or Buzzer indicator will flash. (Default is buzzer)• Press the ‘+’ or ‘-‘ button to select wake to radio or buzzer.• Anytime you press the ‘End’ button you save the settings and exit. • If you do not press any buttons for 5 ~ 10 seconds, the displayed alarm time will be set up and go back to the previous mode.• Set up the Alarm 2 in the same way. The Default Alarm 2 time is 7:00 am.S n o o z e I D i m m e rAlarm1Alarm202• The volume level will flash. Complete• To set the wake up sound volume• Clock keeps running but no LCD backlight/display• Battery low icon will stay on when the battery is close to dead BluetoothPMSleepAl 1RadioBuzzerAl 2BluetoothPMSleepAl 1RadioBuzzerAl 2BluetoothPMSleepAl 1RadioBuzzerAl 2BluetoothPMSleepAl 1RadioBuzzerAl 2BluetoothPMSleepAl 1RadioBuzzerAl 2S n o o z e I D i m m e rAlarm1Alarm24. SETTING THE ALARM / RÉGLAGE DE L'HEURES n o o z e I D i m m e rAlarm2Alarm1STOPEndTalkMode1.EndTalkTalkTalk2.EndTalk1. 2.PresetPreset:02ModeiLuv Morning Call 2• If a phone call comes in, press the ‘Talk’ button to answer the call or press the ‘End’ button to reject the call.• Press the ‘End’ button to end the call.EndTalk• Select Aux-in from the source of your music. (FM radio > aux-in > Bluetooth).TalkModeReorient or relocate the receiving antenna.Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Increase the separation between the equipment and receiver.Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction(FRONT) (BACK)FOLDING LINESFOLDING LINESJumbo Display Alarm Clock SpeakerWO289BT
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

Navigation menu