iLuv Creative Technology WO289BT Jumbo Display Alarm Clock Speaker User Manual MC2 QSG 110916 D
iLuv Creative Technology Jumbo Display Alarm Clock Speaker MC2 QSG 110916 D
manual
Sleep
Micro USB
QSG
For charging only. Does not sync.
Pour recharger uniquement Ne synchronise pas
Nur zum auaden, nicht zum Syncronisieren.
Solo para carga. No se sincroniza
仅用于充电，不用于同步。
TimeShaker® Boom Main Unit
2.
SETTING THE CLOCK
/ RéGLAGE DE L'HEURE / UHRZEIT EINSTELLEN / AJUSTE DE LA HORA
3. SETTING TIME / RéGLAGE DE L'HEURE / UHRZEIT EINSTELLEN / AJUSTE DE LA HORA
4. SETTING THE ALARM / RÉGLAGE DE L'HEURE
AC Adapter
WHAT’S INCLUDED
12 / 24 HR
Set up the preset station
Aux-In Mode
AC Adaper
(Back)
(Back)
(Shaker Side)
• For all settings, if you do not press any button for 5 ~ 10 seconds, you will be timed out.
All displayed changes will be saved and will go back to the previous mode.
• 2. Adjusting item(s) will flash.
• Press the + or - button to adjust the time. Hold the + or - button to adjust quickly.
• During the FM radio mode, press the ‘Preset’ button to play preset stations.
• Press the button again to move to next preset station in cycle (Preset 1 -> 2 ... ->6).
• Select Bluetooth from the source of your music.
(FM radio > aux-in > Bluetooth).
• Tune the radio station you want to save
• Hold the ‘Bluetooth’ button to pair with a new device
• Go to "Settings" and “Bluetooth” from your mobile device
• Turn on Bluetooth®
• When paired, the main unit will make a chime bell sound and
the Bluetooth indicator will stay on.
• Again to save
• When the alarm goes off, press the ‘SNOOZE | DIMMER’ button to temporarily deactivate it.
The snooze function will extend your alarm in increments of 9 minutes.
* To adjust the display’s brightness.
• To stop the alarm / To disable the alarm
• Select FM radio from the source of your music.
(FM radio > aux-in > Bluetooth)
• Go to sleep mode. The sleep indicator will turn on.
• Power Down
• The Default Alarm 1 time is 6:00am.
Daylight Saving Time (DST)
• Press for 2 seconds and then go back to the current time.
1. TO POWER ON / RéGLAGES / UM IHN EINZUSTELLEN / PARA ENCENDER
5. FM RADIO / CHARGEMENT / AUFLADEN / CARGA / 充电
6. RADIO PRESET
7. BLUETOOTH / AUX-IN
8. SLEEP FUNCTION 9. CHARGING / BATTERY BACKUP
RÉ-INITIALISATION DE L'IDENTIFIANT DU VIBREUR DE LIT / BED SHAKER ID CODE ZURÜCKSETZEN
REINICIAR EL CÓDIGO DE IDENTIFICACIÓN DEL AGITADOR DE CAMA / 重新设置床震器ID代码
iLuv®, TimeShakerTM, and GreeNology® trademarks are the exclusive properties of jWIN Electronics Corp.
and are registered with the U.S. Patent and Trademark Oce, and may be registered or pending registration
in other countries. All other iLuv® trademarks, service marks, and logos may be registered or pending
registration in the U.S. or in other countries. All other trademarks or registered trademarks are the property
of their respective owners.
© 2016 iLuv Creative Technology. Printed in China.
Quick Start Guide
Guide de démarrage rapide
iLuv
Designed in New York, USA
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
QSG
Backup Battery
12/24 -1/+1 Time Set Aux-in Power
Time Format Daylight Saving Time
DC 5V
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
12/24 -1/+1 Time Set Aux-in Power
Time Format Daylight Saving Time
DC 5V
(Back)
12/24 -1/+1 Time Set Aux-in Power
Time Format Daylight Saving Time
DC 5V
(Back) (Back)
12/24 -1/+1 Time Set Aux-in Power
Time Format Daylight Saving Time
DC 5V
12/24 -1/+1 Time Set Aux-in Power
Time Format Daylight Saving Time
DC 5V
02
• Press the ‘+’ or ‘>>’ button to increase the preset number
• Press the ‘-’ or ‘<<’ button to decrease the preset number
* Press the ‘<<’ or >> button to change track. Hold the ‘<<’ or ‘>>’ to rewind or fast forward within the song
* Press the ‘<<’ or >> button to change track. Hold the ‘<<’ or ‘>>’ to rewind or fast forward within the song
• Press the ‘<<’ or ‘>>’ button to tune the frequency.
• Hold the ‘<<’ or ‘>>’ button to search down or up for next station.
• If you do not press any button for 2 seconds, the display will go back to the current time.
• Press the ‘+’ or ‘-‘ button to adjust the volume.
• Continue to press the ‘Sleep’ button to select the number of minutes you want your music to play: 90, 60, 45, 30, 15 minutes or OFF.
• To charge other devices, connect one end of the USB charging cable (not included) to the “Charge” port on the top of the main unit.
• The display will change back to the current time if you do not press any button for 3 seconds.
• The music will stop playing once the sleep timer has ¬finished.
• To stop sleep mode before the time is out press the ‘Sleep’ button to select ‘OFF’ or press the ‘Power’ button anytime.
• Press the + or - button to adjust the time. Hold the + or - button to adjust quickly.
• The Radio or Buzzer indicator will flash.
(Default is buzzer)
• Press the ‘+’ or ‘-‘ button to select wake to radio or buzzer.
• Anytime you press the ‘End’ button you save the settings and exit.
• If you do not press any buttons for 5 ~ 10 seconds, the displayed alarm time will be set up and go back to the previous mode.
• Set up the Alarm 2 in the same way. The Default Alarm 2 time is 7:00 am.
S n o o z e I D i m m e r
Alarm
1
Alarm
2
02
• The volume level will flash. Complete
• To set the wake up sound volume
• Clock keeps running but no LCD backlight/display
• Battery low icon will stay on when the battery is close to dead
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
Bluetooth
PM
Sleep
Al 1
Radio
Buzzer
Al 2
S n o o z e I D i m m e r
Alarm
1
Alarm
2
4. SETTING THE ALARM / RÉGLAGE DE L'HEURE
S n o o z e I D i m m e r
Alarm
2
Alarm
1
STOP
End
Talk
Mode
1.
End
Talk
Talk
Talk
2.
End
Talk
1. 2.
Preset
Preset
:02
Mode
iLuv Morning Call 2
• If a phone call comes in, press the ‘Talk’ button to answer the call or
press the ‘End’ button to reject the call.
• Press the ‘End’ button to end the call.
End
Talk
• Select Aux-in from the source of your music.
(FM radio > aux-in > Bluetooth).
Talk
Mode
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Increase the separation between the equipment and receiver.
Warning: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction
(FRONT) (BACK)
FOLDING LINES
FOLDING LINES
Jumbo Display Alarm Clock Speaker
WO289BT
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.