iMageTech IMAGEA2SPK01 iMage A2 Bluetooth Conference Speakerphone User Manual iMageTech A2 170323 EN

iMageTech Co.,Ltd iMage A2 Bluetooth Conference Speakerphone iMageTech A2 170323 EN

Users Manual

1. Increase volume2. Lower volume3. Mute4: Mute microphone5: Answer6: Hang up7: Mode selecon8: Mode status indicator9: Power status indicatorBluetooth ModeUSB ModeAUX ModeAdapter ModeLED IndicatorPower status/Charging10: Audio In11. USB Slot12. Power switchAUX INCharing First!Please connect the USB cable to iMage A2 Bluetooth Conference Spea-kerphone to charge it; it is recommended to fully charge the power for approximately 6 hours (charge unl power indicator goes off) before using it for the first me. Power StatusWhen the power is turned on, if one of the four mode indicators on the right has a blue light on, it means that the unit is currently powered-on.Charging: When the orange light is constantly on, it means that it is currently charging; when the orange light goes off, it means that charging is complete.Power remaining: If the blue light flickers it means that there is sufficient power remaining; if the red light flickers it means that power is low and requires charging.Packing1. iMage A2 Bluetooth Conference Speakerphone2. Micro-USB cable3. User manualMode selection: Bluetooth ModeYou can connect other portable devices or computer using Bluetooth connecon to make iMage A2 Bluetooth Conference Speakerphone your mulmedia speakerphone.Connecon method:1. Select “Search for Bluetooth device” on the device you want to connect.2. You will see “iMage A2_XX (number differs according to the different devices)”; click on it to perform pairing.3. Pairing complete. Blue light remains constantly on: Bluetooth device has successfully connected with iMage A2 Bluetooth Conference Speakerphone, and supports HFP and A2DP.* If the device could not be paired, you can clear the previous pairing data to pair it over again; press and hold the hang up buon for 3 seconds and wait unl you hear the prompt then release it to search for iMage A2 Bluetooth Conference Speakerphone again for pairing.* Please confirm the Bluetooth chip built in the computer before connecng to a PC or notebook using Bluetooth Mode, and download the related driver programs etc. from the original manufacturer of the chip; please refer to the user manual of your computer for details. Dimensions: 165mm X 165mm X 55mm Product weight: 360±5g Bluetooth version: Bluetooth v3.0+EDR/HFP/A2DP/WBS Communicaon me: 6~8 hr.(BT) Playback me: 6~8 hr.(BT), 8~10 hr.(AUX) Standby me: 48~60 hr.(BT) Baery capacity: 950mAH Recepon angle: Omni-Direconal Operang frequency: 2402MHz-2480MHz Recepon distance: 0.3~3m Audio output: Bluetooth/USB Audio input: Bluetooth/USB/AUX Module type: GFSK Antenna type: Build-in Antenna Operang environment: 0 ~ 70℃* Note: Data listed above were measured by actual testing in laboratories; actual data may differ according to usage scenarios.iMage A2 Bluetooth Conference SpeakerphoneI/O Port buttons and slotsWelcome!Thank you for purchasing iMage A2 Bluetooth Conference Speakerphone; this instrucon manual will guide you on how to start using this product.StartTurn on the power and start iMage A2 Bluetooth Conference Speakerphone; press the (mode selecon) buon to select the mode you need.Note: The baery life will significantly decrease if your device has not been charged for a lone me.Therefore, we recommend you to charge your device at least once every week.SpecificationMode selection: AUX ModeYou can make iMage A2 Bluetooth Conference Speakerphone an expansion speaker by connecng it to a signal source using a 3.5Ø audio cable. Connecon method: Connect the audio output of the device (PC, NB etc.) to the Audio In socket(3.5Ø jack) of iMage A2 Bluetooth Conference Speakerphone.
Mode selection: USB ModeYou can connect to a PC or notebook through Micro-USB to make iMage A2 Bluetooth Conference Speakerphone your expansion speakerphone set.Connecon method:1. First connect the USB cable to the Micro-USB jack of iMage A2Bluetooth Conference Speakerphone.2. Wait for the computer to automacally install the drivers (pleasefirst confirm that your computer is connected to the internet).3. Set the “Playback device” and “Recepon device” of the computeras iMage A2.* To use iMage A2 Bluetooth Conference Speakerphone with specificapplicaon programs, you must first go to the program’s sengs to select the “Playback device” and “Recepon device”.FAQI hear connuous burst noises* Bluetooth is a wireless technology and is very sensive to theobjects between the connected devices.If there are no large objects (such as walls etc.) blocking between iMage A2 Bluetooth Conference Speakerphone and the connected device, the maximum allowed distance between the two can reach up to 10 meters.I cannot receive calls using iMage A2 Bluetooth Conference Speakerphone* Please confirm that the mode selected is “Bluetooth Mode”.* Please confirm that iMage A2 Bluetooth Conference Speakerphonehas successfully paired with your device.* Please increase the volume of iMage A2 Bluetooth ConferenceSpeakerphone.I had problems during pairing* You may have accidently deleted the pairing data during operaon.- Please refer to the pairing instrucons in the “Bluetooth Mode” chapter.Problems faced when playing music from music devices (mobile phones, PC, MP3 players etc.)* Please confirm that other devices support Bluetooth 3.0(downwards compable) and A2DP, or else it will not be able to operate.Please refer to the user manual of the device used, and find out how to pair it with the Bluetooth playback device.Contact Us!1. Website Introducon: hp://www.iMagetech.com.tw (providesthe newest support informaon and online user manual)2. E-mail address: hp://www.iMagetech.com.tw/contact.php3. Please call: 886-2-279670414. Address: 5F., No.16, Aly. 15, Sec. 6, Minquan E. Rd., Neihu Dist.,Taipei City 114Mode selection: Adapter Mode (optional purchase)You can purchase the iMageTech MCU4 Speakerphone System or iMage A1 Bluetooth Adapter Tx/Rx addionally to connect the audio input and output of the video device, making iMage A2 Bluetooth Conference Speakerphone your external auxiliary speakerphone for your video set.Connecon method:1. Connect the iMageTech MCU4 Speakerphone System or iMage A1Bluetooth Adapter Tx/Rx output/input to the audio input/output of the video device.2. Connect the iMageTech MCU4 Speakerphone System or iMage A1Bluetooth Adapter Tx/Rx power and press the connect (Bluetooth connecon) buon.3. iMage A2 Bluetooth Conference Speakerphone will automacallyconnect with the adapter.* Please refer to the user manual of iMageTech MCU4 SpeakerphoneSystem or iMage A1 Bluetooth Adapter Tx/Rx for detail seng process. StatementThis product complies with the provisions of the low-power radio wave radiaon Administrave Regulaons Arcle XII-XIV etc.* Without permission granted by the DGT, any company, enterprise,or user is not allowed to change frequency, enhance transming power or alter original characterisc as well as performance to an approved low power radio-frequency devices.* The low power radio-frequency devices shall not influence aircrasecurity and interfere legal communicaons; If found, the user shall cease operang immediately unl no interference is achieved.* The said legal communicaons means radio communicaons isoperated in compliance with the Telecommunicaons Act.* The low power radio-frequency devices must be suscepble withthe interference from legal communicaons or ISM radio wave radiated devices.Notice: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.

Navigation menu