iMageTech IMAGEA2SPK01 iMage A2 Bluetooth Conference Speakerphone User Manual iMageTech A2 170323 EN

Download:
Mirror Download [FCC.gov]
Document ID	3549049
Application ID	Xd5MKRx5ZV+j0hpltSlcEw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.74kB (309216 bits)
Date Submitted	2017-09-07 00:00:00
Date Available	2017-09-07 00:00:00
Creation Date	2017-03-23 17:37:33
Producing Software	Adobe PDF library 9.00
Document Lastmod	2017-09-01 19:06:04
Document Title	User Manual_iMageTech_A2_170323_EN
Document Creator	Adobe Illustrator CS4

iMage A2 Bluetooth Conference Speakerphone
Specification
Packing
1. iMage A2 Bluetooth Conference Speakerphone
2. Micro-USB cable
3. User manual
Welcome!
Thank you for purchasing iMage A2 Bluetooth Conference
Speakerphone; this instruction manual will guide you on how to start
using this product.
I/O Port buttons and slots
1. Increase volume
2. Lower volume
3. Mute
4: Mute microphone
5: Answer
6: Hang up
7: Mode selection
8: Mode status
indicator
9: Power status
indicator
Dimensions: 165mm X 165mm X 55mm
Product weight: 360±5g
Bluetooth version: Bluetooth v3.0+EDR/HFP/A2DP/WBS
Communication time: 6~8 hr.(BT)
Playback time: 6~8 hr.(BT), 8~10 hr.(AUX)
Standby time: 48~60 hr.(BT)
Battery capacity: 950mAH
Reception angle: Omni-Directional
Operating frequency: 2402MHz-2480MHz
Reception distance: 0.3~3m
Audio output: Bluetooth/USB
Audio input: Bluetooth/USB/AUX
Module type: GFSK
Antenna type: Build-in Antenna
Operating environment: 0 ~ 70℃
* Note: Data listed above were measured by actual testing in laboratories;
actual data may differ according to usage scenarios.
Start
Turn on the power and start iMage A2 Bluetooth Conference
Speakerphone; press the
(mode selection) button to select the
mode you need.
Note: The battery life will significantly decrease if your device has not
been charged for a lone time.Therefore, we recommend you to charge
your device at least once every week.
Mode selection: Bluetooth Mode
You can connect other portable devices or computer using
Bluetooth connection to make iMage A2 Bluetooth Conference
Speakerphone your multimedia speakerphone.
AUX IN
10: Audio In
11. USB Slot
12. Power switch
Blue light remains constantly on: Bluetooth device has successfully
connected with iMage A2 Bluetooth Conference Speakerphone, and
supports HFP and A2DP.
LED Indicator
Bluetooth Mode
USB Mode
AUX Mode
Adapter Mode
Connection method:
1. Select “Search for Bluetooth device” on the device you want to
connect.
2. You will see “iMage A2_XX (number differs according to the
different devices)”; click on it to perform pairing.
3. Pairing complete.
Power status/Charging
Charing First!
Please connect the USB cable to iMage A2 Bluetooth Conference Speakerphone to charge it; it is recommended to fully charge the power for
approximately 6 hours (charge until power indicator goes off) before
using it for the first time.
Power Status
When the power is turned on, if one of the four mode indicators on the
right has a blue light on, it means that the unit is currently powered-on.
Charging: When the orange light is constantly on, it means that it is
currently charging; when the orange light goes off, it means
that charging is complete.
Power remaining: If the blue light flickers it means that there is
sufficient power remaining; if the red light flickers it
means that power is low and requires charging.
* If the device could not be paired, you can clear the previous
pairing data to pair it over again; press and hold
the hang up
button for 3 seconds and wait until you hear the prompt then
release it to search for iMage A2 Bluetooth Conference
Speakerphone again for pairing.
* Please confirm the Bluetooth chip built in the computer before
connecting to a PC or notebook using Bluetooth Mode, and
download the related driver programs etc. from the original
manufacturer of the chip; please refer to the user manual of your
computer for details.
Mode selection: AUX Mode
You can make iMage A2 Bluetooth Conference Speakerphone an
expansion speaker by connecting it to a signal source using a 3.5Ø
audio cable.
Connection method: Connect the audio output of the device (PC, NB
etc.) to the Audio In socket(3.5Ø jack) of iMage A2 Bluetooth
Conference Speakerphone.
Mode selection: USB Mode
You can connect to a PC or notebook through Micro-USB to make
iMage A2 Bluetooth Conference Speakerphone your expansion
speakerphone set.
Connection method:
1. First connect the USB cable to the Micro-USB jack of iMage A2
Bluetooth Conference Speakerphone.
2. Wait for the computer to automatically install the drivers (please
first confirm that your computer is connected to the internet).
3. Set the “Playback device” and “Reception device” of the computer
as iMage A2.
* To use iMage A2 Bluetooth Conference Speakerphone with specific
application programs, you must first go to the program’s settings to
select the “Playback device” and “Reception device”.
Mode selection: Adapter Mode (optional purchase)
You can purchase the iMageTech MCU4 Speakerphone System or
iMage A1 Bluetooth Adapter Tx/Rx additionally to connect the audio
input and output of the video device, making iMage A2 Bluetooth
Conference Speakerphone your external auxiliary speakerphone for
your video set.
Connection method:
1. Connect the iMageTech MCU4 Speakerphone System or iMage A1
Bluetooth Adapter Tx/Rx output/input to the audio input/output of
the video device.
2. Connect the iMageTech MCU4 Speakerphone System or iMage A1
Bluetooth Adapter Tx/Rx power and press the connect (Bluetooth
connection) button.
3. iMage A2 Bluetooth Conference Speakerphone will automatically
connect with the adapter.
* Please refer to the user manual of iMageTech MCU4 Speakerphone
System or iMage A1 Bluetooth Adapter Tx/Rx for detail setting
process.
FAQ
I hear continuous burst noises
* Bluetooth is a wireless technology and is very sensitive to the
objects between the connected devices.If there are no large objects
(such as walls etc.) blocking between iMage A2 Bluetooth
Conference Speakerphone and the connected device, the maximum
allowed distance between the two can reach up to 10 meters.
I cannot receive calls using iMage A2 Bluetooth Conference
Speakerphone
* Please confirm that the mode selected is “Bluetooth Mode”.
* Please confirm that iMage A2 Bluetooth Conference Speakerphone
has successfully paired with your device.
* Please increase the volume of iMage A2 Bluetooth Conference
Speakerphone.
I had problems during pairing
* You may have accidently deleted the pairing data during operation.
- Please refer to the pairing instructions in the “Bluetooth Mode”
chapter.Problems faced when playing music from music devices
(mobile phones, PC, MP3 players etc.)
* Please confirm that other devices support Bluetooth 3.0
(downwards compatible) and A2DP, or else it will not be able to
operate.Please refer to the user manual of the device used, and find
out how to pair it with the Bluetooth playback device.
Statement
This product complies with the provisions of the low-power radio
wave radiation Administrative Regulations Article XII-XIV etc.
* Without permission granted by the DGT, any company, enterprise,
or user is not allowed to change frequency, enhance transmitting
power or alter original characteristic as well as performance to an
approved low power radio-frequency devices.
* The low power radio-frequency devices shall not influence aircraft
security and interfere legal communications; If found, the user shall
cease operating immediately until no interference is achieved.
* The said legal communications means radio communications is
operated in compliance with the Telecommunications Act.
* The low power radio-frequency devices must be susceptible with
the interference from legal communications or ISM radio wave
radiated devices.
Contact Us!
1. Website Introduction: http://www.iMagetech.com.tw (provides
the newest support information and online user manual)
2. E-mail address: http://www.iMagetech.com.tw/contact.php
3. Please call: 886-2-27967041
4. Address: 5F., No.16, Aly. 15, Sec. 6, Minquan E. Rd., Neihu Dist.,
Taipei City 114
Notice: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:03:23 17:37:33+08:00
Creator                         : Adobe Illustrator CS4
Modify Date                     : 2017:09:01 19:06:04+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : User Manual_iMageTech_A2_170323_EN
Creator Tool                    : Adobe Illustrator CS4
Metadata Date                   : 2017:09:01 19:06:04+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 160
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18233 bytes, use -b option to extract)
Document ID                     : xmp.did:0380117407206811A4DADA508C67DEE3
Instance ID                     : uuid:99e117b6-ec05-44a1-bff0-1448c6042b5a
Rendition Class                 : proof:pdf
Original Document ID            : uuid:1EF667A4AFFEE211BF5398F9FC04B02A
Derived From Instance ID        : xmp.iid:0280117407206811A4DADA508C67DEE3
Derived From Document ID        : xmp.did:0280117407206811A4DADA508C67DEE3
Derived From Original Document ID: uuid:1EF667A4AFFEE211BF5398F9FC04B02A
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:028011740720681195FEA1144DD747FA, xmp.iid:F77F1174072068118F62A92502AA68FA, xmp.iid:F87F1174072068118F62A92502AA68FA, xmp.iid:69F0A23A71A3E3119DCBCAE359C14359, xmp.iid:6BF0A23A71A3E3119DCBCAE359C14359, xmp.iid:6CF0A23A71A3E3119DCBCAE359C14359, xmp.iid:819F6785F7A7E311AA5BD712642CE2D4, xmp.iid:FE7F1174072068119109BD198681EF9C, xmp.iid:FC7F1174072068118298D0437453AF6C, xmp.iid:0280117407206811A4DADA508C67DEE3, xmp.iid:0380117407206811A4DADA508C67DEE3
History When                    : 2014:02:18 17:52:20+08:00, 2014:02:18 17:53:54+08:00, 2014:02:18 18:09:10+08:00, 2014:03:04 15:49:32+08:00, 2014:03:04 15:52:33+08:00, 2014:03:04 15:58:46+08:00, 2014:03:10 09:58:48+08:00, 2016:02:25 17:20:29+08:00, 2016:10:20 18:48:37+08:00, 2017:03:23 17:36:58+08:00, 2017:03:23 17:37:23+08:00
History Software Agent          : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4
History Changed                 : /, /, /, /, /, /, /, /, /, /, /
Producer                        : Adobe PDF library 9.00
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 209.999929
Max Page Size H                 : 296.999959
Max Page Size Unit              : Millimeters
Font Name                       : LiGothicMed, ArialNarrow, ArialMT, Calibri, MicrosoftJhengHeiRegular, LiHeiPro
Font Family                     : 蘋果儷中黑, Arial Narrow, Arial, Calibri, 微軟正黑體, 儷黑 Pro
Font Face                       : 中黑, Regular, Regular, Regular, Regular, 中黑
Font Type                       : TrueType, Open Type, Open Type, Open Type, Open Type, TrueType
Font Version                    : 6.1d3e3, Version 2.38.1x, Version 5.06, Version 5.62, Version 6.02, 6.0d5e2
Font Composite                  : False, False, False, False, False, False
Font File Name                  : Apple LiGothic Medium.ttf, Arial Narrow.ttf, Arial.ttf, Calibri.ttf, Microsoft Jhenghei.ttf, 儷黑 Pro.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: AutoCAD Color
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 75.020996
Swatch Groups Colorants Magenta : 67.968300
Swatch Groups Colorants Yellow  : 67.022202
Swatch Groups Colorants Black   : 90.164001
Page Count                      : 2

EXIF Metadata provided by EXIF.tools