ikeGPS SP02 Spike User Manual Spike tablet safety manual 1

ikeGPS Limited Spike Spike tablet safety manual 1

Contents

Spike-tablet-safety-manual-1

For support andmore information:online: support.ikegps.com1 (844) 445-3477, ext 3Black620-02300This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:· This device may not cause harmful interference.· This device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modification to this unit not expressly approved by manufacturer could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:· Reorient or relocate the receiving antenna.· Increase the separation between the equipment and receiver.· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.· Consult the dealer or an experienced radio/TV technician for help.This product is intended to be powered by a UL Listed power supply with a rated output of 5 Vdc and 0.35A.ikeGPS, Inc (ikeGPS) warranties its Products for 1 year after purchase for any defective materials, craftsmanship, or other manufacturing issues within its control. Any damage to a Product due to use, misuse, negligence, or other situations outside the control of IkeGPS are not eligible for Warranty actions. The sole and exclusive remedy provided to you is a replacement of your Product, with, at the sole discretion of ikeGPS, a new or remanufactured Product. To exercise this Warranty, you must contact ikeGPS at support@ikegps.com within 1 year of the purchase of your Product. You must assume the responsibility to ship and insure your Product to ikeGPS. ikeGPS will examine your Product and verify Warranty eligibility. Any replacement Product sent to you will be shipped at ikeGPS’s expense. This Warranty is not transferable to any other user and is only made available to the original purchaser.Safety, Maintenance, and WarrantyBluetooth InformationFCC ID: 2ACBGSP02IC: 11952A-SP02FCC InformationSPIKEModel: IKE-SP02FRONTBACKCaution: This instrument emits a non-visible laser beam. The laser beam emitted is Laser Class 1 per IEC 60825-1 and complies with 21 CFT 1040.10 and 1040.11 except for deviations pursuant to Laser Notice 50, date June 24, 2007Caution: Hazardous Radiation. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.Caution: while the laser tool is in operation, be careful not to expose your eyes to the emitting laser lens. Exposure to a laser beam for an extended time may be hazardous to your eyes. Class 1 Laser Product IEC60825-1:2014 (3rd Edition)WarrantyikeGPS LtdLevel One, 42 Adelaide RdWellington 6021, New Zealandikegps.comFOLDFOLD
BlackEurope - EU Declaration of ConformityThis device complies with the essential requirements and other relevant provisions of the R&TIE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TIE Directive 1999/5/EC:· EN 300 328 V1.8.1:2011Electromagnetic compatibility and Radio spectrum Matters (ERM); WidebandTransmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TIE Directive· EN 301 489-1 V1.9.2Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagneticCompatibility (EMC) standard for radio equipment and services; Part 1: Commontechnical requirements· EN 301 489-17 V2.2.1Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagneticCompatibility (EMC) standard for rad io equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union)This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be returned, at no cost to you, to ikeGPS. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detail on how to recycle your Spike please visit www.ikegps.com/support and submit a request for collection. ikeGPS will coordinate the collection of the unit from you with our logistics service provider at no additional cost to you.INSIDEWarning: the following label samples are placed on your laser tool to inform of the laser class for your convenience and safety. Please reference the Product Manual for the specifics on a particular product model. Industry CanadaThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:· This device may not cause interference; and· This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:· l’appareil ne doit pas produire de brouillage;· l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).SpikeComplies with 21 CFR1040.10 and 1040.11except for deviations pursuant to Laser Notice No.50, dated June 24, 2007. IKE-SP025VDC 350mAMADE IN CHINAFCC ID: 2ACBG3000IC: 11952A-3000TYPE1ikeGPS42 Adelaide Rd WellingtonNew Zealand160-0231060950-1E477159www.ikegps.comE2087FOLDFOLD

Navigation menu