invoxia E169 DTP2 User Manual Notice emploi NVX 620 page 1

invoxia DTP2 Notice emploi NVX 620 page 1

Users Manual

Welcome / Bienvenue E169
U.S. Federal Communications Commission (FCC) Compliance StatementThe changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfences that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designated to provide reasonable protection against harmful interferences in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the intructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferences to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnementUnder Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.IC warning:
3EnglishBox contentLightening, 30 pin andmicro-USB cable adaptersmicro-USB adaptersmicro-USB cablesAC adapterHandset  Tablet standE169 base Lightening, 30 pin andLightening, 30 pin andSmart holder Ethernet cable
Designed and produced by invoxia, Paris4EnglishAdjust volume. Receive and End a call.Bluetooth pairing.Your E169 PhoneVoicemailSecret
Set up5En glishPositioningPla ce your phone near your network soc ket (and near your mains supply socket if you are using a mai ns  power adapter).Connecting the baseThis phone is powered by PoE (Power over Ethernet), if your network is compatible, or through your mains AC 100-240V supply. 1. Insert the cable suitable to your smartphone into the matching cable adapter.Place it then in the special pocket of the receptacle.
6English3. Slide the cord into place through the interstices under the base. 4. Plug the USB connector to the left USB port at the rear of the device.
7En glish5. Insert the suitable adapter to your smartphone, or none if you use a case and your device doesn’t t.To connect a dierent model, please repeat steps 1 to 5.6. Plug the mains power adapter into the back of the base and into a wall mount socket.
EnglishInstalling the handsetthe interstices under the base.1. Plug the cord of the handset into the right USB port at the back of the base. Slide the cord into place through7. Plug one end of the Ethernet cable into the LAN connector at the back of the base and into your network telephone socket (PC port is to connect to your computer to provide Internet).8
En glish92. Place the Smart Holder and the handset on the top of the base.
E nglishGuided by a need for simplicity shared with all smartphones and tablets, and for your own eciency, we have built an App for your convenience.This invoxia app let you configure and use the E169. 1. Dock your smartphone or pair your smartphone or tablet via Bluetotth.2. Download the invoxia app.3. Follow the instructions on your device to congure your invoxia phone based on your network provider’s settings.4. Once the installation is complete, you’re ready to enjoy the full power of your invoxia phone.You’ll now easily nd your Contacts, Recents, Keypad and Voicemail as well as easily transfer a call, make a conference call, swap between calls, etc. Co nfiguration10
Dock or connect via USB your iPhone/iPod/iPad. The Bluetooth connection is then automatic!Bluetooth 1st connectionFor any d evices,  long push the volume button until you hear  a so und signal. A  «Pa iring mode: in voxia is waiting for connection» m ess age allo ws you to pair your E169 in your device Bluetooth  menu. A n al s ound conrms the pairing.Multiple connections: Pairing a new device / Reconnect a deviceDisconnect a paired device Long push the volume button until hearing a double-sound signal. The last connected device is then disconnected and In your invoxia app, go to Settings > Bluetooth , you can tap «Unpair».Unpair all the connected devicesLong push the volume button until hearing a three-sound signal. A «Clearing all subscriptions» message conrms it.Connecting a previously paired device is easy from its Bluetooth For any devices, long push the volume button until you hear a sound signal. A «Pairing mode: invoxia is waiting for connection» message allows you to pair your E169 in your device Bluetooth menu. A final sound confirms the pairing.auto-connection is stopped. A «Disconnecting» message and sound signal conrms the disconnection.Also forget the E169 from your device Bluetooth menu in order to complete future pairings between these devices.With iOS 6, be sure your Bluetooth is actived rst.With iOS 6, be sure your Bluetooth is actived rst.BluetoothEnglishmenu. The last connected device is the controlling device.11
Need help ?Plea se visit the www.invoxia.c om website  for more information. You can  view yo ur E169 phone  full user guide at www.invoxia.com/en/support.«Made for iPod», «Made for iPhone», and «Made for iPad» mean that an electronic accessory has been designed to connect specically Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may aect wireless performance.www.invoxia.com© 2013 invoxia. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright holder. Invoxia,  Exp erience  your phone,  In Vivo Acoustic, Sma rt holder are registered  trademarks, names and logos are the property of invoxia.  iPa d, iPhone, iPod touc h, Lightening are trademarks of Apple Inc.,  registered in the U.S.  and other countrie s. Bluetooth ® is a trademark of Bluetooth SIG Inc.Printed in China.to iPod, iPhone, or iPad, respectively, and has been certied by the developper to meet Apple performance standards.Non contractual document.Android is a  trademark of G oogle Inc.English12

Navigation menu