invoxia E169 DTP2 User Manual Notice emploi NVX 620 page 1
invoxia DTP2 Notice emploi NVX 620 page 1
invoxia >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2166064 |
| Application ID | a+N4K6sQcObRX5PqQpY+bw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 167.93kB (2099067 bits) |
| Date Submitted | 2014-01-14 00:00:00 |
| Date Available | 2014-01-14 00:00:00 |
| Creation Date | 2017-10-24 07:04:39 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-24 07:04:39 |
| Document Title | Notice-emploi NVX 620 page 1 |
| Document Creator | Adobe Illustrator CS5 |
Welcome / Bienvenue E169 U.S. Federal Communications Commission (FCC) Compliance Statement The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfences that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designated to provide reasonable protection against harmful interferences in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the intructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferences to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC warning: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Box content English E169 base Smart holder Handset Ethernet cable AC adapter Tablet stand Lightening, 30 pin and micro-USB cables Lightening, 30 pin and micro-USB adapters Lightening, 30 pin and micro-USB cable adapters English Your E169 Phone Secret Adjust volume. Receive and End a call. Bluetooth pairing. Voicemail Designed and produced by invoxia, Paris Set up En glish Positioning Pla ce your phone near your network soc ket (a nd near your mains s upply so cket if you are using a mai ns power adapter). Connecting the base This phone is powered by PoE (Power over Ethernet), if your network is compatible, or through your mains AC 100-240V supply. 1. Insert the cable suitable to your smartphone into the matching cable adapter. Place it then in the special pocket of the receptacle. English 3. Slide the cord into place through the interstices under the base. 4. Plug the USB connector to the left USB port at the rear of the device. En glish 5. Insert the suitable adapter to your smartphone, or none if you use a case and your device doesn’t fit. To connect a different model, please repeat steps 1 to 5. 6. Plug the mains power adapter into the back of the base and into a wall mount socket. Installing the handset 1. Plug the cord of the handset into the right USB port at the back of the base. Slide the cord into place through the interstices under the base. English 7. Plug one end of the Ethernet cable into the LAN connector at the back of the base and into your network telephone socket (PC port is to connect to your computer to provide Internet). En glish 2. Place the Smart Holder and the handset on the top of the base. Co nfiguration 1. Dock your smartphone or pair your smartphone or tablet via Bluetotth. 2. Download the invoxia app. 3. Follow the instructions on your device to configure your invoxia phone based on your network provider’s settings. 4. Once the installation is complete, you’re ready to enjoy the full power of your invoxia phone. You’ll now easily find your Contacts, Recents, Keypad and Voicemail as well as easily transfer a call, make a conference call, swap between calls, etc. 10 E nglish Guided by a need for simplicity shared with all smartphones and tablets, and for your own efficiency, we have built an App for your convenience. This invoxia app let you configure and use the E169. English Bluetooth Bluetooth 1st connection With iOS 6, be sure your Bluetooth is actived first. Dock or connect via USB your iPhone/iPod/iPad. The Bluetooth connection is then automatic! For any d evices, long push the volume button until you hear a so und signal. A «Pa iring mode: in voxia is waiting for connection» m ess age allo ws you to pair your E169 in your device Bluetooth menu. A fin al s ound confirms the pairing. Multiple connections: Pairing a new device / Reconnect a device With iOS 6, be sure your Bluetooth is actived first. For any devices, long push the volume button until you hear a sound signal. A «Pairing mode: invoxia is waiting for connection» message allows you to pair your E169 in your device Bluetooth menu. A final sound confirms the pairing. Connecting a previously paired device is easy from its Bluetooth menu. The last connected device is the controlling device. Disconnect a paired device Long push the volume button until hearing a double-sound signal. The last connected device is then disconnected and auto-connection is stopped. A «Disconnecting» message and sound signal confirms the disconnection. In your invoxia app, go to Settings > Bluetooth , you can tap «Unpair». Unpair all the connected devices Long push the volume button until hearing a three-sound signal. A «Clearing all subscriptions» message confirms it. Also forget the E169 from your device Bluetooth menu in order to complete future pairings between these devices. 11 English Need help ? Plea se visit the www.invoxia.c om website for more information. You can view yo ur E169 phone full user guide at www.invoxia.com/en/support. «Made for iPod», «Made for iPhone», and «Made for iPad» mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developper to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. www.invoxia.com © 2013 invoxia. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright holder. Invoxia , Exp erience your phone , In Vivo Aco ustic , Sma rt holder are registered trademarks, names and logos are the property of invoxia. iPa d, iP hone, iPod touc h, Lightening are trademarks of Apple Inc., registered in the U.S. and other co untrie s. Bluetooth ® is a trademark of Bluetooth SIG Inc. Android is a trademark of G oogle Inc. 12 Printed in China. Non contractual document.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2013:02:25 14:30:11+02:00 Creator : Adobe Illustrator CS5 Modify Date : 2014:01:14 16:48:57-08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : Notice-emploi NVX 620 page 1 Creator Tool : Adobe Illustrator CS5 Metadata Date : 2014:01:14 16:48:57-08:00 Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 3563 bytes, use -b option to extract), (Binary data 3325 bytes, use -b option to extract) Thumbnail Width : 256 Thumbnail Height : 188 Thumbnail Format : JPEG Thumbnail Image : (Binary data 9509 bytes, use -b option to extract) Document ID : xmp.did:1229FC424F7FE2119465A5A42A969BB3 Instance ID : uuid:7a26eec8-08f0-4958-ba8c-be6b8af13bf1 Rendition Class : proof:pdf Original Document ID : uuid:05B8953B126EE211BFAEA2F7313BC5D7 Derived From Instance ID : uuid:1620509a-9ac6-4995-a7a0-23008c45d154 Derived From Document ID : xmp.did:993D304B377CE211A3DBA911650638B3 Derived From Original Document ID: uuid:05B8953B126EE211BFAEA2F7313BC5D7 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:993D304B377CE211A3DBA911650638B3, xmp.iid:1229FC424F7FE2119465A5A42A969BB3 History When : 2013:02:21 18:13:57+01:00, 2013:02:25 14:28:37+01:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, / Doc Change Count : 669 Trapped : False Producer : Adobe PDF library 9.90 N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 163.316819 Max Page Size H : 119.816804 Max Page Size Unit : Millimeters Font Name : ArialMT, HelveticaWorld-Regular Font Family : Arial, HelveticaWorld Regular Font Face : Regular, Regular Font Type : Open Type, Unknown Font Version : Version 5.10, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False Font File Name : arial.ttf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Page Count : 14EXIF Metadata provided by EXIF.tools